| Rexin 160 | S.A.P.I.C.I. SpA | Rexin 160 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane ...view more Rexin 160 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane coatings. view less | |
| Rexin XP 81 | S.A.P.I.C.I. SpA | Rexin XP 81 is a linear polyester polyol based on bio-derived succinic acid and glycol. This product combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 82 | S.A.P.I.C.I. SpA | Rexin XP 82 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 86 | S.A.P.I.C.I. SpA | Rexin XP 86 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| RGF100 | Guangxi Zhongchang Resin Co., Ltd. | RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon so...view more RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. view less | |
| RGF100W | Guangxi Zhongchang Resin Co., Ltd. | RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon s...view more RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. view less | |
| RGF90 | Guangxi Zhongchang Resin Co., Ltd. | RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solv...view more RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. view less | |
| RGF90W | Guangxi Zhongchang Resin Co., Ltd. | RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon sol...view more RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. view less | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...view more Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. view less | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...view more Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. view less | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...view more Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. view less | |
| Rosin Pentaerythrite Ester - 145 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kind...view more Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kinds of adhesive. view less | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...view more RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. view less | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...view more RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. view less | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...view more RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. view less | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...view more RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. view less | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...view more RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. view less | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...view more RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. view less | |
| RUETAFLEX 1000 | Rain Carbon Germany GmbH | RUETAFLEX 1000 is a diisopropyl naphthalene. | |
| SAFIC-CHEM TI | Safic-Alcan | SAFIC-CHEM TI is a mono-functional isocyanate used in moisture-curing one or two components Paints, Adhesives, and Sealants. SAFIC-CHEM TI reacts with water, giving off carbon dioxide and resulting in the formation of reaction products (inert amide) which...view more SAFIC-CHEM TI is a mono-functional isocyanate used in moisture-curing one or two components Paints, Adhesives, and Sealants. SAFIC-CHEM TI reacts with water, giving off carbon dioxide and resulting in the formation of reaction products (inert amide) which are soluble in conventional solvent-based paints formulations. Approximately 12g of stabilizer is theoretically required for reaction with 1g of water. The suggested use level is between 0.5% and 4.0%, for 0.05% to 0.3% moisture. Experience has shown, however, that the reaction is more effective in the presence of an excess of SAFIC-CHEM TI. view less | Request Sample |
| Saitack 258 | STI Polymer | Saitack 258 is a white liquid form pressure sensitive acrylic adhesive. This product is most commonly used in pressure sensitive tape and label applications. | |
| Saitack 267 | STI Polymer | Saitack 267 is a milky white liquid form pressure sensitive acrylic adhesive. This product is most commonly used in freezer grade label adhesive applications. | |
| Saitack 269 | STI Polymer | Saitack 269 is a milky white liquid form acrylic emulsion. This product is most commonly used in pressure sensitive adhesives for bonding single-ply roofing membrane applications. | |
| Saitack 3550 | STI Polymer | Saitack 3550 is a milky white liquid form Vinyl Acrylic Emulsion. This product is most commonly used as an additive in compounded adhesives and film to craft laminate applications. | |
| Saitack 400 | STI Polymer | Saitack 400 is a milky white liquid form acrylic copolymer emulsion. This product is most commonly used in compounded construction adhesives, pressure sensitive and sealant applications. | |
| Saitack 426 | STI Polymer | Saitack 426 is a milky white liquid form acrylic emulsion. This product is most commonly used as a bonding adhesive in roofing membrane applications. | |
| Saitack 466P | STI Polymer | Saitack 466P is a milky white liquid form all-temperature/general purpose use pressure sensitive acrylic adhesive. This product is most commonly used as an adhesive in label applications. | |
| Saitack 514 | STI Polymer | Saitack 514 is a white liquid form pressure sensitive adhesive. This product is most commonly used as an adhesive in expanded polymer tape and polyethylene based foam tape applications. | |
| Saitack 926 | STI Polymer | Saitack 926 is a milky white liquid form pressure sensitive acrylic emulsion. This product is most commonly used as an additive in pressure sensitive adhesive applications. | |
| Saitack 934 | STI Polymer | Saitack 934 is a milky white liquid form acrylic emulsion. This product is most commonly used as an additive in pressure sensitive adhesive and film laminating applications. | |
| Saitack 935 | STI Polymer | Saitack 935 is a milky white liquid form acrylic emulsion. This product is most commonly used as an additive in pressure sensitive and film laminate adhesive applications. | |
| Saitack 970 | STI Polymer | Saitack 970 is a milky white liquid form acrylic emulsion. This product is most commonly used as an adhesive in vinyl flooring, pressure sensitive label, and packaging applications. | |
| SCD 1066 | Etna Tec Limited, LLC | SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and prim...view more SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and primers, but can also be used for adhesives, appliance coatings, and container coatings. view less | |
| SCV-2590 | NuSil Silicone Technology 1 | SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from b...view more SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from building in sensitive devices. This product also features Ultra Low OutgassingTM which exceeds specifications outlined in NASA and the European Space Agency. view less | |
| SCV-2590-2 | NuSil Silicone Technology 1 | SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assem...view more SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assemblies from extreme temperatures, humidity and radiation. It also features Ultra Low OutgassingTM which makes it ideal to protect sensitive devices from condensation. view less | |
| SCV1-2590 | NuSil Silicone Technology 1 | SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require lo...view more SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require low outgassing to avoid condensation in sensitive devices. view less | |
| SCV1-2596 | NuSil Silicone Technology 1 | SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI...view more SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI and EMI shielding in electrical and space applications and is well suited to for form-in-place conductive gaskets. view less | |
| SHIKOH™ UV-1700B | Nippon Gohsei | SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tape...view more SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-2000B | Nippon Gohsei | SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optic...view more SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-2750B | Nippon Gohsei | SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes...view more SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes, screen printing inks, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-3000B | Nippon Gohsei | SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...view more SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. view less | |
| SHIKOH™ UV-3200B | Nippon Gohsei | SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...view more SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. view less | |
| SHIKOH™ UV-3210EA | Nippon Gohsei | SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optica...view more SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. view less | |
| SHIKOH™ UV-3300B | Nippon Gohsei | SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive f...view more SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive films and labels, and optical applications. view less | |
| SHIKOH™ UV-3310B | Nippon Gohsei | SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and pri...view more SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. view less | |
| SHIKOH™ UV-3500BA | Nippon Gohsei | SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and elec...view more SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, adhesive films and labels. view less | |
| SHIKOH™ UV-3520EA | Nippon Gohsei | SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, ad...view more SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, adhesive films and labels, and plastic and electronic coatings. view less | |
| SHIKOH™ UV-3700B | Nippon Gohsei | SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings a...view more SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings and primers for plastics and electronics, and adhesive films and labels. view less | |
| SHIKOH™ UV-6300B | Nippon Gohsei | SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and ...view more SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-6630B | Nippon Gohsei | SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, pla...view more SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, plastics, and electronics, as well as masking tapes and adhesive films and labels. view less | |
| SHIKOH™ UV-6640B | Nippon Gohsei | SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optica...view more SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optical discs, plastics, and electronics, as well as adhesive films and labels. view less | |
| SHIKOH™ UV-7000B | Nippon Gohsei | SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and scree...view more SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. view less | |
| SHIKOH™ UV-7461TE | Nippon Gohsei | SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plasti...view more SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. view less | |
| SHIKOH™ UV-7510B | Nippon Gohsei | SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, a...view more SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, adhesive films and labels, masking tapes, and coatings for optical discs, woodworking, plastics, and electronics. view less | |
| SHIKOH™ UV-7600B | Nippon Gohsei | SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and l...view more SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-7610B | Nippon Gohsei | SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking...view more SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking tapes and adhesive films and labels. view less | |
| SHIKOH™ UV-7620EA | Nippon Gohsei | SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs...view more SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs, plastics, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. view less | |
| SHIKOH™ UV-7630B | Nippon Gohsei | SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...view more SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. view less | |
| SHIKOH™ UV-7640B | Nippon Gohsei | SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, ele...view more SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, electronics, and woodworking applications, and adhesive films and labels. view less | |
| SHIKOH™ UV-7650B | Nippon Gohsei | SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...view more SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. view less | |
| SiSiB® PC5410 | SiSiB SILICONES | SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings...view more SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| SiSiB® PC5430 | SiSiB SILICONES | SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments...view more SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| SiSiB® PC5433 | SiSiB SILICONES | SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in z...view more SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| SiSiB® PC5440 | SiSiB SILICONES | SiSiB® PC5440 is a colorless transparent liquid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a...view more SiSiB® PC5440 is a colorless transparent liquid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| SiSiB® PC6110 | SiSiB SILICONES | SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymer...view more SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers, leading to a better dispersibility, reduced melt viscosity and easier processing of filled plastics; for the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; in sealants; or for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating. view less | |
| SiSiB® PC6112 | SiSiB SILICONES | SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals fro...view more SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. view less | |
| SiSiB® PC6122 | SiSiB SILICONES | SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV sili...view more SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. view less | |
| SiSiB® PC6130 | SiSiB SILICONES | SiSiB® PC6130, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize re...view more SiSiB® PC6130, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize resins via free radical mechanisms - copolymerization or grafting - and to modify surfaces; for the preparation of moisture-curing polymers, e.g. polyethylene; for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for various mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers; in the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; or in sealants. view less | |
| SiSiB® PC7910 | SiSiB SILICONES | SiSiB® PC7910 is an almost colorless or yellowish transparent liquid. It hydrolyzes upon contact with moisture. It is used as a raw material for acetoxy crosslinking RTV-1 sealants. | |
| Snowtack™ 765A | Lawter | Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfac...view more Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfaces. It is mechanically stable, has good wash-off behavior and is suitable for use in waterborne adhesives in building and construction and automotive and paper industries. view less | |
| Snowtack® 775 A | Lawter | Snowtack® 775 A is a tackifier dispersion that gives a higher softening point of 76 oC acid-grade tackifier with a higher cohesive strength when formulated with acrylic and SBR PSA polymers. The Snowtack® resin series are water-based dispersions intended ...view more Snowtack® 775 A is a tackifier dispersion that gives a higher softening point of 76 oC acid-grade tackifier with a higher cohesive strength when formulated with acrylic and SBR PSA polymers. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. view less | |
| Snowtack® 780A | Lawter | Snowtack® 780A is a rosin ester with 50% solids content and is a general purpose ester grade tackifier to improve adhesive performance when formulated with acrylic and styrene-butadiene rubber and PSA polymers. The Snowtack® resin series are water-based d...view more Snowtack® 780A is a rosin ester with 50% solids content and is a general purpose ester grade tackifier to improve adhesive performance when formulated with acrylic and styrene-butadiene rubber and PSA polymers. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. view less | |
| Snowtack® 880G | Lawter | Snowtack® 880G is a rosin ester hybrid tackifier that is made to improve adhesion to apolar substrates with SBR PSA polymers and 2EHA acrylics. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emul...view more Snowtack® 880G is a rosin ester hybrid tackifier that is made to improve adhesion to apolar substrates with SBR PSA polymers and 2EHA acrylics. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. view less | |
| Snowtack™ SE724G | Lawter | Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard re...view more Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard resins, providing a smooth peel. It also improves adhesion to high and low energy surfaces and shows compatibility with acrylic and other polymers. It has good water resistance, is mechanically stable and has applications in waterborne, pressure-sensitive adhesives in various industries. view less | |
| Snowtack™ SE780G | Lawter | Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, impro...view more Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, improves adhesion to high and low-energy substrates, has good mechanical stability and has applications in various waterborne adhesive systems. view less | |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...view more SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. view less | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...view more SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. view less | |
| ST-40-2 | Chan Sieh Enterprises Co, Ltd. | ST-40-2 is a self-crosslinking styrene acrylic copolymer, in the form of a white emulsion, that provides excellent water-resistance and mechanical stability. This product can be used as a fabric adhesive for non-woven fabrics. | |
| ST-40-2H | Chan Sieh Enterprises Co, Ltd. | ST-40-2H is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product provides excellent water-resistance and mechanical stability. It can be used as a binder for hard-type non-woven fabrics. This product is suitable f...view more ST-40-2H is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product provides excellent water-resistance and mechanical stability. It can be used as a binder for hard-type non-woven fabrics. This product is suitable for spray and dipping. view less | |
| ST-404U | Chan Sieh Enterprises Co, Ltd. | ST-404U is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product is flexible and elastic, and provides excellent water-resistance and mechanical stability. It can be used as a binder for soft, non-woven fabrics. | |
| ST-40UF | Chan Sieh Enterprises Co, Ltd. | ST-40UF is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product provides excellent water-resistance and mechanical stability. It can be used as a binder for hard-type non-woven fabrics. It is suitable for spray an...view more ST-40UF is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product provides excellent water-resistance and mechanical stability. It can be used as a binder for hard-type non-woven fabrics. It is suitable for spray and dipping applications. view less | |
| StanChem SC 5019 | StanChem Polymers | StanChem 5019 is a HEC stabilized, vinyl acetate emulsion with very high molecular weight and a highly branched structure. SC 5019 exhibits good water resistance and high electrolyte tolerance. SC 5019 is recommended for use in the production of paper lam...view more StanChem 5019 is a HEC stabilized, vinyl acetate emulsion with very high molecular weight and a highly branched structure. SC 5019 exhibits good water resistance and high electrolyte tolerance. SC 5019 is recommended for use in the production of paper laminating adhesives, joint cement and textile sizing. view less | Request Sample |
| STYROFAN® ND 614 | BASF Dispersions & Resins | STYROFAN ND 614 is a high performance styrene butadiene with excellent cement and mortar compatibility. It improves flexural and tensile bond strength along with adhesion. | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer designed for use in cold seal adhesives. Excellent early water resistance. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a cold seal adhesive binder with high pigment binding properties. Can be used in combination with Texicryl® 13-528 to achieve desired properties. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a soft styrene acrylic copolymer which can be used to modify the adhesion characteristics of latex based adhesives. | |
| TKA-396 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environmen...view more TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environment. It finds application in alcohol soluble inks, coatings, and adhesives. view less | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...view more Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...view more Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| TROYKYD® D767 | Arxada – Troy Corporation | TROYKYD® D767 is a highly effective mineral oil and silicone-free defoamer for aqueous systems. It is effective over a wide range of pH and temperature. This product exhibits good compatibility and is extremely effective in thin systems. such as ad-mixtur...view more TROYKYD® D767 is a highly effective mineral oil and silicone-free defoamer for aqueous systems. It is effective over a wide range of pH and temperature. This product exhibits good compatibility and is extremely effective in thin systems. such as ad-mixtures, and polymer emulsions. view less | Request Sample |
| U-50-5 | Chan Sieh Enterprises Co, Ltd. | U-50-5 is a self-crosslinking acrylic resin in the form of a yellowish, transparent emulsion. This product provides good softness and excellent adhesion. It can be used as an adhesive binder for the lamination of polyurethane leather and cloth. | |
| Ucopol M 541 | S.A.P.I.C.I. SpA | Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5%...view more Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. view less | |
| Ucopol M 551 | S.A.P.I.C.I. SpA | Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% ...view more Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. view less | |
| Uni-Dur E 1001 | S.A.P.I.C.I. SpA | Uni-Dur E 1001 is an isocyanic hardener. This product can be used to cross-link polyurethane adhesives for natural or synthetic rubber. It is soluble in ethyl acetate and appears as a clear, viscous fluid. | |
| Uni-Dur E 2002 ARFE | S.A.P.I.C.I. SpA | Uni-Dur E 2002 ARFE is an adhesive that is soluble in ethyl acetate. This product significantly improves the adhesion, cohesion, and heat resistance of the final bond. It can be used to cross-link polyurethane adhesives for natural or synthetic rubber. | |
| Uni-Dur WB 7075 | S.A.P.I.C.I. SpA | Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive...view more Uni-Dur WB 7075 is a hardener for high-quality water-based polyurethane systems. This product can improve the resistance of adhesive bonds toward moisture, heat and solvents and is easily dispersible by mechanical stirrers. It can be used as an adhesive in footwear applications. view less | |
| Unithane IC-100 | Union Specialties, Inc. | Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, ink...view more Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, inks, adhesives, and graphic arts. view less | |
| Unithane IC-151 NF | Union Specialties, Inc. | Unithane IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of Dipropylene glycol dimethyl ether. It provides good gloss, adhesion, and chemical resistance properties. This product has a gloss...view more Unithane IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of Dipropylene glycol dimethyl ether. It provides good gloss, adhesion, and chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 10-150cps. It is often designed for industrial coatings, interior coatings, wood, paints, and graphic arts. view less | |
| Unithane IC-400 | Union Specialties, Inc. | Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suit...view more Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suitable for use in a formulated coating or sealer coat for wood, paint, inks, adhesives, and graphic arts. view less |
