UL Prospector

Success!

Successfully saved your search
1- Or 2-Component Wash Primer (Formulation #4.1.1) GRACE 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beck...view more 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beckopox EM 460 is recommended in combination with the standard polyvinylbutyral resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium. The formulation can also be used as a one-component system. In this case, Part B is premixed and subsequently added to part A after dispersion. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 – 15 microns by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. view less
1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) GRACE 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the c...view more 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the catalyst. SHIELDEX® C 303 is a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. The 1-Pack-Polyurethane primer was tested on Bonder 1303 treated galvanised steel test panels (ex Chemetall) at a bar coated dry film thickness of 5 microns. Cure was to a peak metal temperature (PMT) of 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 °C. view less
100 G/L Black High Gloss Enamel (Formulation #2512 BLK ST-1) EPS Materials 100 G/L Black High Gloss Enamel (Formulation #2512 BLK ST-1) formulation information.
100 G/L High Gloss White Enamel (Formulation #EPS 2548 WHT ST-1) EPS Materials 100 G/L High Gloss White Enamel (Formulation #EPS 2548 WHT ST-1) formulation information.
100 G/L White Corrosion Resistant Primer (Formulation #EPS 2548 WHT SP-1) EPS Materials 100 G/L White Corrosion Resistant Primer (Formulation #EPS 2548 WHT SP-1) formulation information.
100 G/L White High Gloss Enamel (Formulation #EPS 2512 WHT ST-1) EPS Materials This is a 100 G/L White High Gloss Enamel (Formulation #EPS 2512 WHT ST-1).
1K Hydro Soft Feel Lacquer, Black (Formulation #PCO-0059SF) Hoffmann Mineral Industrial coating 1K Hydro soft feel lacquer, black without matting agent based on urea methanal condensate Bayhydrol UH 340/1//UH 650.
1K Stoving Soft Feel Lacquer (Formulation #RR 87) Hoffmann Mineral Industrial coating 1K Stoving soft feel lacquer, gray, matte Desmophen 1652 and Desmodur BL 3175 using SILLITIN Z 86.
1K Stoving Soft Feel Lacquer (Formulation #RR 88) Hoffmann Mineral 1K Stoving Soft Feel Lacquer (Formulation #RR 88) with SILLITIN Z 86.
1K Water-Based Primer Surfacer for Automotive Refinish BASF Dispersions & Resins This water-based primer surfacer is for automotive refinishing. It features low VOC content, quick sanding times, and good direct-to-metal performance.
2 Pack Water Base Epoxy Anti-Corrosion Primer (Formulation #2106) ICL Advanced Additives 2-Pack Water-based Epoxy Primer using HALOX® SW-111
2-Component Hydro Soft Feel Lacquer (Formulation #K14401.0 [1]) Hoffmann Mineral 2-Component Hydro Soft Feel Lacquer (Formulation #K14401.0 [1]) with SILLITIN Z 86.
2-Component Hydro Soft Feel Lacquer (Formulation #K14402.0 [1]) Hoffmann Mineral 2-Component Hydro Soft Feel Lacquer (Formulation #K14402.0 [1]) with SILLITIN Z 86.
2-Component Hydro Soft Feel Lacquer (Formulation #K14403.0 [1]) Hoffmann Mineral 2-Component Hydro Soft Feel Lacquer (Formulation #K14403.0 [1]) with SILLITIN Z 86.
2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) GRACE 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination wit...view more 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination with the standard resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium substrates. The combination of Alcophor 827 with SHIELDEX® anti-corrosive pigments improves hot salt spray resistance over steel substrates. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 –15 μm by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. Drying was for 7 days at ambient conditions. view less
2K High Solids Epoxy Primer (Formulation #828) ICL Advanced Additives 2K High Solids Epoxy Primer using HALOX® 750
2K Hydro Soft Feel Lacquer, Black (Formulation #K14403.1[8]) Hoffmann Mineral 2K Hydro Soft Feel Lacquer, Black (Formulation #K14403.1[8]) using SILLITIN Z 86 and SILLITIN V 85.
2K Hydro Soft Feel Lacquer, Black (Formulation #PCO-0001e-SF) Hoffmann Mineral 2K Hydro Soft Feel Lacquer, Black (Formulation #PCO-0001e-SF) using SILLITIN Z 86.
2K Hydro Soft Feel Lacquer, Black (Formulation #PCO-0003e-SF) Hoffmann Mineral 2K Hydro Soft Feel Lacquer, Black (Formulation #PCO-0003e-SF) using SILLITIN Z 86.
2K PU Clearcoat Based on BASF Joncryl 906 and Bayer Desmodur N 3300 (Formulation #API-14) King Industries, Inc. This formulation is for a 2-component acrylic urethane clearcoat with improved abrasion and impact resistance.
2K PU Heavy Duty Protective Coating (Formulation #Inz 2/LV Clear - 001) Incorez Ltd. This formulation is for an automotive refinish clearcoat using the Incozol product line.
2K PU Heavy Duty Protective Coating (Formulation #Inz 2/LV White - 002) Incorez Ltd. This formulation is for a heavy duty white topcoat using the Incozol product line.
2K PU Primer-Surfacer (Formulation #R 24402.2A) Hoffmann Mineral 2K PU Primer-Surfacer (Formulation #R 24402.2A) using AKTISIL MM and AKTISIL PF 777.
2K Pigmented Polyurethane Coating (Formulation #API-15) King Industries, Inc. This formulation is for a pigmented 2-component acrylic urethane coating with improved flexibility and lower VOC content.
2K Pigmented Polyurethane Coating (Formulation #API-16) King Industries, Inc. This formulation is for a pigmented 2-component acrylic urethane coating with improved flexibility, lower VOC content, and high hardness.
2K Pigmented Polyurethane Coating (Formulation #API-17) King Industries, Inc. This formulation is for a pigmented 2-component acrylic urethane coating with improved flexibility, lower VOC content, and high hardness.
2K Polyamide Cured Epoxy Red Iron Oxide Primer (Formulation #1001-X-75) ICL Advanced Additives 2K Polyamide Cured Epoxy Red Iron Oxide Primer using HALOX® BW-111
2K Soft Feel Lacquer (Formulation #K24402.0) Hoffmann Mineral 2K Soft Feel Lacquer (Formulation #K24402.0) using SILLITIN Z 86 PURISS and SILLITIN Z 89 PURISS.
2K Soft Feel Lacquer (Formulation #PCO-0017e-SF) Hoffmann Mineral 2K Soft Feel Lacquer (Formulation #PCO-0017e-SF) using SILLITIN Z 86 PURISS and SILLITIN Z 89 PURISS.
2K Soft Feel Lacquer, Black (Formulation #RR 62) Hoffmann Mineral 2K Soft Feel Lacquer, Black (Formulation #RR 62) using SILLITIN Z 86.
2K Solvent Base Polyester / Urethane DTM Enamel (Formulation #A-75) ICL Advanced Additives 2K Solvent-based Polyester / Urethane DTM Enamel using HALOX® 630
2K Wash Primer (Formulation #B-90) ICL Advanced Additives 2K Wash Primer based on BUTVAR B-90 using HALOX® SZP-391 JM & HALOX® 550
2K Waterborne Floor Paint - Matt Grey (Formulation #142 - 024) Incorez Ltd. This formulation is a grey matt floor paint that utilizes Amirez 142.
2K Waterborne Floor Paint - Semi-Glossy Red (Formulation #148/024 - 023) Incorez Ltd. This formulation is for a red gloss floor paint that utilizes the product Amirez 148/024.
2K Waterborne Floor Paint - Semi-Glossy Red (Formulation #148/024 - 025) Incorez Ltd. This formulation is for a red gloss floor paint that utilizes the product Amirez 148/024.
2K Waterborne PUR (Formulation #A-145) ICL Advanced Additives 2K Water-based PUR based on BAYHYDROL A-145/ DESMODUR XP 2410 using HALOX® 430 & 550
2K Waterborne Polyurethane (Formulation #VP 2235 1) ICL Advanced Additives 2K Water-based Polyurethane using HALOX® SZP-391
2K Waterborne Primer - Clear (Formulation #148/010 - 016) Incorez Ltd. This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, a long pot life, and utilizes the product Amirez 148/010.
2K Waterborne Primer - Clear (Formulation #148/024 - 017) Incorez Ltd. This formulation is a clear concrete primer for two pack waterborne epoxy systems. It features excellent adhesion, high gloss, good hardness, faster drying and utilizes the product Amirez 148/024.
2K Waterborne Sealer - Clear (Formulation #142 - 019) Incorez Ltd. This formulation is a clear concrete sealer for waterborne epoxy systems. It features high gloss, excellent hardness, good chemical and water resistance that utilizes the product Amirez 142.
2K Waterborne Sealer - Clear (Formulation #148/024 - 018) Incorez Ltd. This formulation is a clear concrete sealer that features a high gloss, good hardness, excellent chemical and water resistance that utilizes Amirez 148/024.
2K Waterborne Wall Paint - White (Formulation #142/148-024 - 022) Incorez Ltd. This white waterborne wall paint features Amirez 142 and Amirez 148/024.
2K Wood Primer (Formulation #RR 3.17) Hoffmann Mineral 2K Wood Primer (Formulation #RR 3.17) featuring SILLITIN V 88 and SILLITIN Z 89 PURISS.
2K Wood Primer, Pigmented (Formulation #RR 3.20) Hoffmann Mineral 2K Wood Primer, Pigmented (Formulation #RR 3.20) featuring SILLITIN V 88.
40 PVC Red Oxide Spray Primer (Formulation #EPS® 2540 ROX SP-1) GRACE 40 PVC Red Oxide Spray Primer (Formulation #EPS® 2540 ROX SP-1) is a suggested paint formulation offered to assist the paint formulator in achieving the high performance properties offered by EPS® 2540.
40 PVC White DTM Primer (Formulation #EPS 2535 SP-3) EPS Materials 40 PVC White DTM Primer (Formulation #EPS 2535 SP-3) formulation information.
40 PVC White DTM Primer (Formulation #EPS® 2535 SP-3) GRACE 40 PVC White DTM Primer (Formulation #EPS® 2535 SP-3) is a suggested paint formulation offered to assist the paint formulator in achieving the high performance properties offered by EPS® 2535.
40 PVC White DTM Primer (Formulation #EPS® 2560 SP-1) GRACE 40 PVC White DTM Primer (Formulation #EPS® 2560 SP-1) is a suggested paint formulation offered to assist the paint formulator in achieving the high performance properties offered by EPS® 2560.
Acrylic Direct to Metal Coating Based on Posichem PC-Mull AC 16-2 (Formulation #Acr06V1) Micronisers Australasia Pty. Ltd. This formulation is an acrylic direct to metal coating based on Posichem PC-Mull AC 16-2. It is a starting point formulation using Oxylink™.
Acrylic Tannin Stain-blocking Primer with Busan® 11-M1 Buckman Laboratories, Inc. This formulation uses Busan® 11-M1 with other Buckman products to create an acrylic tannin stain-blocking primer.
Air Drying White Pigmented Waterborne Alkyd Coating for Metals on Yachts (Formulation #ALK03V1) Micronisers Australasia Pty. Ltd. This formulation is for an air drying white pigmented waterborne alkyd coating for metals on yachts based on Resydrol AY 6150w. It is a starting point formulation using Oxylink™.
Alkyd Modified Acrylic Latex DTM Primer (Formulation #121813) Vanderbilt Minerals, LLC A formulation for an alkyd modified acrylic latex DTM primer which utilizes VAN GEL® SX, DARVAN® CN, BILT-PLATES® 156, and ACTIV-8®.
Alkyd Modified Acrylic Latex Maintenance Primer (Formulation #120313) Vanderbilt Minerals, LLC A formulation for an alkyd modified acrylic latex maintenance primer which utilizes VAN GEL® ES, DARVAN® 7N, and ACTIV-8®.
Anquamine 401: Preliminary Primer (Formulation #3515) ICL Advanced Additives 2K Water-based Epoxy Primer with HALOX® SW-111 cured with Anquamine 401
Anti-Corrosion Coating (Formulation #R24404.1) Hoffmann Mineral Anti-Corrosion Coating (Formulation #R24404.1) featuring SILLITIN V 85 and SILLITIN Z 86 and AKTISIL PF 777.
Anti-Corrosion Primer (Formulation #R 10402 ABC) Hoffmann Mineral Anti-Corrosion Primer (Formulation #R 10402 ABC) AKTIFIT AM and AKTISIL MM and AKTISIL PF 777.
Anti-Corrosion Primer (Formulation #R 24301.1) Hoffmann Mineral Anti-Corrosion Primer (Formulation #R 24301.1) featuring AKTIFIT AM and AKTISIL PF 777.
Anti-Corrosion Primer For High Requirements (Formulation #R 24403 B) Hoffmann Mineral Anti-Corrosion Primer For High Requirements (Formulation #R 24403 B) featuring AKTISIL EM.
Anti-Corrosion Primer for High Requirements (Formulation #407-04) Hoffmann Mineral Anti-Corrosion Primer for High Requirements (Formulation #407-04) featuring SILLITIN Z 86.
Anti-Corrosion Primer for High Requirements (Formulation #R 24403 C) Hoffmann Mineral Anti-Corrosion Primer for High Requirements (Formulation #R 24403 C) featuring AKTIFIT AM.
Anti-Corrosion Primer for High Requirements (Formulation #R 24403 D) Hoffmann Mineral Anti-Corrosion Primer for High Requirements (Formulation #R 24403 D) featuring AKTISIL PF 777.
Anti-Corrosion Primer for High Requirements (Formulation #R24403 A) Hoffmann Mineral Anti-Corrosion Primer for High Requirements (Formulation #R24403 A) featuring SILLITIN Z 86.
Anticorrosion Primer (Formulation #EP 384) ICL Advanced Additives High Performance 2K Water-based Epoxy Primer with HALOX® SW-111 based on BECKOPOX EP 384
Anticorrosive Primer and Topcoat (Formulation #1455) ICL Advanced Additives 2K Water-based Solid Epoxy Primer with HALOX® CW-491 and BASF® ALCOPHOR 827 Synergy
Automotive Quick Dry Clearcoat BASF Dispersions & Resins This is a starting formulation for spot and small panel sized automotive repairs.
Automotive Quick Dry Primer Surfacer BASF Dispersions & Resins This is a starting formulation for spot and small panel sized automotive repairs.
Automotive Refinish: Quick Dry Water-based Primer Surfacer BASF Dispersions & Resins This is a water-based 1K automotive refinish primer surfacer formulation featuring Joncryl® PRO 1525.
Black Air Dry Enamel (Formulation #EPS 6208 BLK) EPS Materials Black Air Dry Enamel (Formulation #EPS 6208 BLK) formulation information.
Black High Gloss Baking Enamel (Formulation #EPS 6208 BLK 1) EPS Materials Black High Gloss Baking Enamel (Formulation #EPS 6208 BLK 1) formulation information.
Black High Gloss DTM Enamel (Formulation #EPS 2535 BLK ST1) EPS Materials This is a Black High Gloss DTM Enamel (Formulation #EPS 2535 BLK ST1).
Black High Gloss Enamel (Formulation #EPS 6264 BLK1) EPS Materials Black High Gloss Enamel (Formulation #EPS 6264 BLK1) formulation information.
Blue Pigmented Protective DTM Metal Coating Based on Neocryl XK-86 (Formulation #ACR11V1) Micronisers Australasia Pty. Ltd. This formulation is for a blue pigmented protective DTM metal coating based on Neocryl XK-86. It is a starting point formulation using Oxylink™.
C-1315 Cure and Seal (Formulation #EPS 2272 CS1) EPS Materials This is a C-1315 Cure and Seal (Formulation #EPS 2272 CS1).
C-1315 Cure and Seal (Formulation #EPS 7725 CS-1 Spray Formula) EPS Materials C-1315 Cure and Seal (Formulation #EPS 7725 CS-1 Spray Formula) formulation information.
C-1315 Cure and Seal Low VOC (Formulation #EPS 2272 CS2) EPS Materials This is a C-1315 Cure and Seal Low VOC (Formulation #EPS 2272 CS2).
CHLORINATED RUBBER Road Marking Paint Suggested Formulation Yuron New Material This is a suggested formulation for creating a road marking paint. It includes a 50% chlorinated rubber toluene solution.
Casting and Encapsulation Huntsman Performance Products An encapsulated object is totally enclosed in some medium. Potting usually refers to a system in which there is a container around an encapsulated part. A casting has no container, but may be poured into a void, such as a mold, and then removed after comp...view more An encapsulated object is totally enclosed in some medium. Potting usually refers to a system in which there is a container around an encapsulated part. A casting has no container, but may be poured into a void, such as a mold, and then removed after complete curing. view less
Ceiling Paint (Formulation #051414) Vanderbilt Minerals, LLC A ceiling paint which utilizes the products DARVAN® 7-N Dispersant, PYRAX® ABB Pyrophyllite, and VANSIL® W-20 Wollastonite.
Chlorinated Rubber High-Build Marine Coating (Base Coat) Yuron New Material This formulation is used as the first coating on ships or steel construction. It has excellent water and corrosion resistance with outstanding durability.
Chlorinated Rubber High-Build Marine Coating (Top Coat) Yuron New Material This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rub...view more This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rubber primer or aqueous phase chlorinated rubber aluminum primer. view less
Chromate Free 1K Epoxy Etch Primer (Formulation #B-30 H) ICL Advanced Additives Chromate-Free 1K Epoxy Etch Primer using HALOX® CW-491
Chromate Free 2K Epoxy Phenolic Etch Primer using HALOX SZP JM and HALOX 550 (Formulation #30-HH) ICL Advanced Additives Chromate Free 2K Epoxy Phenolic Etch Primer using HALOX® SZP 391 JM & HALOX® 550
Chromate-Free 2K Epoxy Phenolic Etch Primer using HALOX 430 JM & HALOX 550 (Formulation #30-HH) ICL Advanced Additives Chromate-Free 2K Epoxy Phenolic Etch Primer using HALOX® 430 JM & HALOX® 550
Clear Acrylic Lacquer for Brass (Formulation #B-66) ICL Advanced Additives HALOX® 630 in a Clear Acrylic Lacquer for Brass
Clear Alkyd Varnish (Formulation #032100) Vanderbilt Minerals, LLC A clear alkyd varnish utilizing ACTIV-8® drier accelerator.
Clear Coat For Furniture (Formulation #I 13401.1B) Hoffmann Mineral Clear Coat For Furniture (Formulation #I 13401.1B) featuring AKTISIL MAM.
Clear Coat For Wood Based On Waterborne PUD Alberdingk U 9150 VP (Formulation# PUD03V2) Micronisers Australasia Pty. Ltd. This formulation is a clear coat for wood based on waterborne PUD Alberdingk U 9150 VP. It is a starting point formulation using Oxylink™.
Clear Coat for Furniture (Formulation #I 13401.1) Hoffmann Mineral Clear Coat for Furniture (Formulation #I 13401.1) featuring SILLITIN Z 89 and SILLITIN V 88.
Clear Satin Wood Finish (Formulation EPS 4216 SATIN1) EPS Materials This formulaiton produces a clear, satin wood finish. It features the product EPS® 4216.
Clear Urethane Varnish (Formulation #EPS 4402 CLR1) EPS Materials Clear Urethane Varnish (Formulation #EPS 4402 CLR1) formulation information.
Clear Varnish (Formulation #EPS 4843/4402 CLR2) EPS Materials Clear Varnish (Formulation #EPS 4843/4402 CLR2) formulation information.
Coal Tar Epoxy Huntsman Performance Products Coal tar-modified epoxy coatings are frequently used to line water tanks and to coat bridges, decks, and pipelines. They offer corrosion protection from water, acids, alkalies, salts, and some solvents.
Coating For Plastics, Black, Sprayable (Formulation #K20103.2 [6]) Hoffmann Mineral Coating For Plastics, Black, Sprayable (Formulation #K20103.2 [6]) featuring SILLITIN V 85 and AKTISIL PF 777 and SILLITIN Z 86 PURISS.
Coating For Plastics, Grey, Sprayable (Formulation #K20102.2 [19]) Hoffmann Mineral Coating For Plastics, Grey, Sprayable (Formulation #K20102.2 [19]) featuring SILLITIN V 85 and SILLITIN Z 86 PURISS and AKTISIL PF 777.
Coatings for Plastics (Formulation #K20101.2 [13]) Hoffmann Mineral Coatings for Plastics (Formulation #K20101.2 [13]) featuring SILLITIN Z 89 PURISS and AKTISIL PF 777.
Coil Coating Primer (Formulation #T 24402.1) Hoffmann Mineral Coil Coating Primer (Formulation #T 24402.1) featuring AKTIFIT AM and SILLITIN Z 89.
Coil Coating Topcoat (Formulation #T 24401.1 B) Hoffmann Mineral Coil Coating Topcoat (Formulation #T 24401.1 B) featuring AKTIFIT AM.
Coil Coating Topcoat (Formulation #T 24401.1) Hoffmann Mineral Coil Coating Topcoat (Formulation #T 24401.1) featuring SILLITIN Z 89.
Concrete Cure & Seal (Formulation #EPS 2526 CS1) EPS Materials Concrete Cure & Seal (Formulation #EPS 2526 CS1) formulation information.
Concrete Sealer/Dustproofer (Formulation #EPS 2526 CLR LS2) EPS Materials Concrete Sealer/Dustproofer (Formulation #EPS 2526 CLR LS2) formulation information.