| Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) | GRACE | Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid ...view more Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid catalysts. Pre-neutralisation of Cycat 500 and phosphoric acid with AMP 95 and ammonia is necessary to ensure paint stability. The addition of AMP 95 also helps to heat stabilise the paint during milling. Higher PVC-values reduce the salt spray performance, and values around 20 to 30 vol.-% are suggested. Alternative fillers such as talcs, calcium carbonates (Millicarb B from Omya) or dolomites (Microdol extra from Norwegian Talcs) or combinations thereof can be used satisfactorily. view less | |
| 1K Acrylic White Topcoat Industrial Coatings (Formulation #SPF_CTG_001_2203) | Arkema Rheology & Specialty Additives | This acrylic white topcoat features Coadis™ 790 and Coapur™ XS 83. | |
| Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) | GRACE | Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with a...view more Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with an acidic pH. The addition of Alcophor 827 is beneficial in two respects: the pH is stabilised at 6.5 which would otherwise be buffered by SHIELDEX® anti-corrosive pigments, and it also improves the corrosion resistanceafter hot salt spray and humidity exposure. The addition level of SHIELDEX® anti-corrosive pigments should not exceed 3 wt.-% to ensure that the pH of the final formulation does not exceed 7. view less | |
| Water-Based Single Component High Gloss Acrylic for DTM and Topcoat Applications | BASF Dispersions & Resins | High performance coatings with low VOC content are needed to meet the market demand and government regulation. BASF has developed a low VOC, high performance, water-based coating system for direct to metal and topcoat applications. | |
| Waterborne White DTM (Formulation #WBACRY799-389W) | ASCOTEC | White Waterborne Acrylic DTM Paint based on ASCONIUM® 142DA and ASCOTRAN® H10. | |
| New! Waterborne White DTM Paint (Formulation #TEXCRYL M59 -01-24) | ASCOTEC | White waterborne Acrylic DTM based on TEXCRYL M59, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY6999) | ASCOTEC | White Waterborne Acrylic DTM Paint based on EPS 595, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #ORGAL F6560 – 01-24) | ASCOTEC | White waterborne Acrylic DTM based on ORGAL F 6560, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY445) | ASCOTEC | White Waterborne Acrylic DTM Paint based on Maincote® 1100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White Primer (Formulation #WBACRY2229) | ASCOTEC | White Waterborne Styrene Acrylic Primer based on Maincote® 100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White Primer (Formulation #WBACRY3726) | ASCOTEC | White Waterborne Styrene Acrylic Primer based on Maincote® PR71K, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne Grey Primer (Formulation #WBACRY8728) | ASCOTEC | Grey Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne Red Primer (Formulation #WBACRY8730) | ASCOTEC | Red Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY2033) | ASCOTEC | White Waterborne Styrene Acrylic DTM Paint based on Carboset® CR765, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY8111) | ASCOTEC | White Waterborne Styrene Acrylic DTM Paint based on Maincote® HG100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| High-Gloss WB White DTM (Formulation #WBACRY7358) | ASCOTEC | White High Gloss Waterborne Acrylic DTM Paint based on Pliotec® HDT16, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| High-Gloss WB White DTM (Formulation #WBACRY7625) | ASCOTEC | White High Gloss Waterborne Styrene Acrylic DTM Paint based on Neocryl® XK85, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Protective Rust-Converting Clear-Coating (Formulation #WBACRY700RF1) | ASCOTEC | Waterborne Acrylic Rust Converting Clear Coating based on Alberdingk® AC2403, ASCONIUM® 114, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| WB Rust-Converting Primer (Formulation #WBACRY799-115R4) | ASCOTEC | White Waterborne Acrylic Rust Converting DTM Coating based on Alberdingk® AC2403, ASCONIUM® 114, ASCOTRAN® H17 and ASCOTRUST® X4. | |
| Rust-Converting Red Primer (Formulation #WBACRY158R1) | ASCOTEC | Red Waterborne Styrene Acrylic Rust Converting Primer based on Neocryl® XK87, ASCONIUM® 143, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) | GRACE | 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination with the standard resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium substrates. The combination of Alcophor 827 with SHIELDEX® anti-corrosive pigments improves hot salt spray resistance over steel substrates. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 –15 μm by bar coater. The formulation was also tested with a 40 micron acrylic...view more 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination with the standard resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium substrates. The combination of Alcophor 827 with SHIELDEX® anti-corrosive pigments improves hot salt spray resistance over steel substrates. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 –15 μm by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. Drying was for 7 days at ambient conditions. view less | |
| 1- Or 2-Component Wash Primer (Formulation #4.1.1) | GRACE | 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beckopox EM 460 is recommended in combination with the standard polyvinylbutyral resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium. The formulation can also be used as a one-component system. In this case, Part B is premixed and subsequently added to part A after dispersion. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 – 15 microns by bar coater. The formulation was also tested with a 40 micron acrylic...view more 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beckopox EM 460 is recommended in combination with the standard polyvinylbutyral resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium. The formulation can also be used as a one-component system. In this case, Part B is premixed and subsequently added to part A after dispersion. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 – 15 microns by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. view less |
