| Organic Zinc Rich Primer | Huntsman Performance Products | Zinc primers, developed to protect structural steel, offer excellent corrosion resistance when used either as preconstruction primers or as top-coated primers. | |
| Waterborne White Primer (Formulation #WBACRY2229) | ASCOTEC | White Waterborne Styrene Acrylic Primer based on Maincote® 100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White Primer (Formulation #WBACRY3726) | ASCOTEC | White Waterborne Styrene Acrylic Primer based on Maincote® PR71K, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne Grey Primer (Formulation #WBACRY8728) | ASCOTEC | Grey Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne Red Primer (Formulation #WBACRY8730) | ASCOTEC | Red Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Gray Primer (Formulation #4669-89B) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. | |
| White Primer (Formulation #4791-21G) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. | |
| Yellow Primer (Formulation #4784-71) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. | |
| Waterborne White Primer (Formulation #WBEPOX048) | ASCOTEC | White Waterborne 2K EPOXY DTM Paint based on Epirez® 6520, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Rust-Converting Red Primer (Formulation #WBACRY158R1) | ASCOTEC | Red Waterborne Styrene Acrylic Rust Converting Primer based on Neocryl® XK87, ASCONIUM® 143, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| Coil Coating Primer (Formulation #T 24402.1) | Hoffmann Mineral | Coil Coating Primer (Formulation #T 24402.1) featuring AKTIFIT AM and SILLITIN Z 89. | |
| Anti-Corrosion Primer (Formulation #R 24301.1) | Hoffmann Mineral | Anti-Corrosion Primer (Formulation #R 24301.1) featuring AKTIFIT AM and AKTISIL PF 777. | |
| Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) | GRACE | Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) is a guideline formulation for general industrial applications. Resydrol 4333 is a water-thinnable modified alkyd emulsion neutralised by ammonia and containing a small amount of cosolvent (2...view more Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) is a guideline formulation for general industrial applications. Resydrol 4333 is a water-thinnable modified alkyd emulsion neutralised by ammonia and containing a small amount of cosolvent (2.5 wt.-% on total formulation). Borchigel L 75, a diurethane thickening agent, is needed to stabilise the viscosity during storage. The combination of SHIELDEX® anti-corrosive pigments with Alcophor 827 leads to synergistic effects in the corrosion resistance of the primer. view less | |
| Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) | GRACE | Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) is a guideline formulation for general industrial applications. Bayhydrol B130 is a water thinnable styrene-butadiene emulsion modified with maleinised oil and neutralised with a mixture of...view more Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) is a guideline formulation for general industrial applications. Bayhydrol B130 is a water thinnable styrene-butadiene emulsion modified with maleinised oil and neutralised with a mixture of triethylamine and ammonia. Little or no cosolvent is necessary for this resin. The combination with Lipaton SB 5521, styrene-butadiene dispersion leads to improved film properties (higher flexibility and overcoatability) and water resistance. The addition level of zinc oxide is optimum at 1 wt.-%, and is recommended in combination with SHIELDEX® AC 5 anti-corrosive pigments in this case. view less | |
| Red High Performance Primer (Formulation #4791-32B) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. | |
| Red High PVC Primer (Formulation #4791-28F) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. | |
| Rust Inhibitive Primer, Water-Based (Formulation #R10103.2 [2]) | Hoffmann Mineral | Rust Inhibitive Primer, Water-Based (Formulation #R10103.2 [2]) featuring SILLITIN Z 86. | |
| Rust Inhibitive Primer, Water-Based (Formulation #R11403.0 [1]) | Hoffmann Mineral | Rust Inhibitive Primer, Water-Based (Formulation #R11403.0 [1]) featuring SILLITIN Z 86. | |
| WB Rust-Converting Primer (Formulation #WBACRY799-115R4) | ASCOTEC | White Waterborne Acrylic Rust Converting DTM Coating based on Alberdingk® AC2403, ASCONIUM® 114, ASCOTRAN® H17 and ASCOTRUST® X4. | |
| Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) | GRACE | Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with a...view more Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with an acidic pH. The addition of Alcophor 827 is beneficial in two respects: the pH is stabilised at 6.5 which would otherwise be buffered by SHIELDEX® anti-corrosive pigments, and it also improves the corrosion resistanceafter hot salt spray and humidity exposure. The addition level of SHIELDEX® anti-corrosive pigments should not exceed 3 wt.-% to ensure that the pH of the final formulation does not exceed 7. view less | |
| 1- Or 2-Component Wash Primer (Formulation #4.1.1) | GRACE | 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beck...view more 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beckopox EM 460 is recommended in combination with the standard polyvinylbutyral resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium. The formulation can also be used as a one-component system. In this case, Part B is premixed and subsequently added to part A after dispersion. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 – 15 microns by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. view less | |
| Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) | GRACE | Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid ...view more Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid catalysts. Pre-neutralisation of Cycat 500 and phosphoric acid with AMP 95 and ammonia is necessary to ensure paint stability. The addition of AMP 95 also helps to heat stabilise the paint during milling. Higher PVC-values reduce the salt spray performance, and values around 20 to 30 vol.-% are suggested. Alternative fillers such as talcs, calcium carbonates (Millicarb B from Omya) or dolomites (Microdol extra from Norwegian Talcs) or combinations thereof can be used satisfactorily. view less | |
| Nubirox 106 in SB Alkyd Primer (Formulation #AC 10433) | Ferro Pigments | This alkyd primer features Nubirox 106. | |
| Nubirox SP in SB Alkyd Primer (Formulation #AC 10430) | Ferro Pigments | This SB Alkyd Primer features Nubirox SP. | |
| Anti-Corrosion Primer for High Requirements (Formulation #R24403 A) | Hoffmann Mineral | Anti-Corrosion Primer for High Requirements (Formulation #R24403 A) featuring SILLITIN Z 86. | |
| Anti-Corrosion Primer for High Requirements (Formulation #407-04) | Hoffmann Mineral | Anti-Corrosion Primer for High Requirements (Formulation #407-04) featuring SILLITIN Z 86. | |
| Nubirox 106 in SB 2K Epoxy Primer (Formulation #EPPA 16711) | Ferro Pigments | This epoxy primer features Nubirox 106. | |
| 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) | GRACE | 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination wit...view more 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination with the standard resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium substrates. The combination of Alcophor 827 with SHIELDEX® anti-corrosive pigments improves hot salt spray resistance over steel substrates. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 –15 μm by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. Drying was for 7 days at ambient conditions. view less | |
| Nubirox 302 in SB 2K Epoxy-polyamide Primer (Formulation #EPPA19852) | Ferro Pigments | This SB 2K Epoxy-polyamide Primer features Nubirox 302. | |
| Nubirox 106 in WB 2K Epoxy-Polyamide Primer (Formulation #EPPAA 18954) | Ferro Pigments | This WB 2K Epoxy-Polyamide Primer features Nubirox 106. | |
| Anti-Corrosion Primer for High Requirements (Formulation #R 24403 C) | Hoffmann Mineral | Anti-Corrosion Primer for High Requirements (Formulation #R 24403 C) featuring AKTIFIT AM. | |
| Anti-Corrosion Primer for High Requirements (Formulation #R 24403 D) | Hoffmann Mineral | Anti-Corrosion Primer for High Requirements (Formulation #R 24403 D) featuring AKTISIL PF 777. | |
| Nubirox 213 in SB 2K Epoxy-Polyamide Primer (Formulation #EPPA 12883) | Ferro Pigments | This SB 2K epoxy-polyamide primer features Nubirox 213. | |
| Rust Converter, Water-Based (Formulation #R10102.2 [23]) | Hoffmann Mineral | Rust Converter, Water-Based (Formulation #R10102.2 [23]) featuring SILLITIN Z 86. | |
| Protective Rust-Converting Clear-Coating (Formulation #WBACRY700RF1) | ASCOTEC | Waterborne Acrylic Rust Converting Clear Coating based on Alberdingk® AC2403, ASCONIUM® 114, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| Coil Coating Topcoat (Formulation #T 24401.1A) | Hoffmann Mineral | Coil Coating Topcoat (Formulation #T 24401.1) featuring SILLITIN Z 89. | |
| Coil Coating Topcoat (Formulation #T 24401.1 B) | Hoffmann Mineral | Coil Coating Topcoat (Formulation #T 24401.1 B) featuring AKTIFIT AM. | |
| Nubirox 302 in Solvent Based DTM Alkyd System (Formulation #AC 19630) | Ferro Pigments | This solvent based DTM alkyd system features Nubirox 302. |
