| Gray Primer (Formulation #4669-89B) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. | |
| Nubirox 106 in WB 2K Epoxy-Polyamide Primer (Formulation #EPPAA 18954) | Ferro Pigments | This WB 2K Epoxy-Polyamide Primer features Nubirox 106. | |
| Protective Rust-Converting Clear-Coating (Formulation #WBACRY700RF1) | ASCOTEC | Waterborne Acrylic Rust Converting Clear Coating based on Alberdingk® AC2403, ASCONIUM® 114, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| Red High Performance Primer (Formulation #4791-32B) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. | |
| Red High PVC Primer (Formulation #4791-28F) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. | |
| Rust Converter, Water-Based (Formulation #R10102.2 [23]) | Hoffmann Mineral | Rust Converter, Water-Based (Formulation #R10102.2 [23]) featuring SILLITIN Z 86. | |
| Rust Inhibitive Primer, Water-Based (Formulation #R10103.2 [2]) | Hoffmann Mineral | Rust Inhibitive Primer, Water-Based (Formulation #R10103.2 [2]) featuring SILLITIN Z 86. | |
| Rust Inhibitive Primer, Water-Based (Formulation #R11403.0 [1]) | Hoffmann Mineral | Rust Inhibitive Primer, Water-Based (Formulation #R11403.0 [1]) featuring SILLITIN Z 86. | |
| Rust-Converting Red Primer (Formulation #WBACRY158R1) | ASCOTEC | Red Waterborne Styrene Acrylic Rust Converting Primer based on Neocryl® XK87, ASCONIUM® 143, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) | GRACE | Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid ...view more Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid catalysts. Pre-neutralisation of Cycat 500 and phosphoric acid with AMP 95 and ammonia is necessary to ensure paint stability. The addition of AMP 95 also helps to heat stabilise the paint during milling. Higher PVC-values reduce the salt spray performance, and values around 20 to 30 vol.-% are suggested. Alternative fillers such as talcs, calcium carbonates (Millicarb B from Omya) or dolomites (Microdol extra from Norwegian Talcs) or combinations thereof can be used satisfactorily. view less | |
| Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) | GRACE | Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with a...view more Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with an acidic pH. The addition of Alcophor 827 is beneficial in two respects: the pH is stabilised at 6.5 which would otherwise be buffered by SHIELDEX® anti-corrosive pigments, and it also improves the corrosion resistanceafter hot salt spray and humidity exposure. The addition level of SHIELDEX® anti-corrosive pigments should not exceed 3 wt.-% to ensure that the pH of the final formulation does not exceed 7. view less | |
| Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) | GRACE | Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) is a guideline formulation for general industrial applications. Resydrol 4333 is a water-thinnable modified alkyd emulsion neutralised by ammonia and containing a small amount of cosolvent (2...view more Waterborne Alkyd Emulsion Primer (Resydrol) (Formulation #3.1.2) is a guideline formulation for general industrial applications. Resydrol 4333 is a water-thinnable modified alkyd emulsion neutralised by ammonia and containing a small amount of cosolvent (2.5 wt.-% on total formulation). Borchigel L 75, a diurethane thickening agent, is needed to stabilise the viscosity during storage. The combination of SHIELDEX® anti-corrosive pigments with Alcophor 827 leads to synergistic effects in the corrosion resistance of the primer. view less | |
| Waterborne Grey Primer (Formulation #WBACRY8728) | ASCOTEC | Grey Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne Red Primer (Formulation #WBACRY8730) | ASCOTEC | Red Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) | GRACE | Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) is a guideline formulation for general industrial applications. Bayhydrol B130 is a water thinnable styrene-butadiene emulsion modified with maleinised oil and neutralised with a mixture of...view more Waterborne Styrene-Butadiene Primer (Bayhydrol) (Formulation #3.3) is a guideline formulation for general industrial applications. Bayhydrol B130 is a water thinnable styrene-butadiene emulsion modified with maleinised oil and neutralised with a mixture of triethylamine and ammonia. Little or no cosolvent is necessary for this resin. The combination with Lipaton SB 5521, styrene-butadiene dispersion leads to improved film properties (higher flexibility and overcoatability) and water resistance. The addition level of zinc oxide is optimum at 1 wt.-%, and is recommended in combination with SHIELDEX® AC 5 anti-corrosive pigments in this case. view less | |
| Waterborne White Primer (Formulation #WBACRY2229) | ASCOTEC | White Waterborne Styrene Acrylic Primer based on Maincote® 100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White Primer (Formulation #WBACRY3726) | ASCOTEC | White Waterborne Styrene Acrylic Primer based on Maincote® PR71K, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| White Primer (Formulation #4791-21G) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. | |
| Yellow Primer (Formulation #4784-71) | Polynt Composites | This formulation utilizes BECKOSOL AQ® 210. |
