| JEFFAMINE® HK-511 POLYETHERDIAMINE | Huntsman Performance Products | Polyetherdiamine that participates in most of the reactions typical for primary amines. | |
| JEFFLINK® 754 DIAMINE | Huntsman Performance Products | A new cycloaliphatic, bis(secondary amine), that may be useful in applications where a slower reaction of amines is desirable. | |
| BECKOPOX™ VEH 2188w/55WA | Allnex | Beckopox® VEH 2188W/55WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings free of volatile basic amines. | Request Sample |
| TEGO® Cure 100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Cure 100 is a reactive ambient curing polysiloxane resin, pre-catalysed with amines, for the use as hardener. | Request Sample |
| EPOTUF® 37-612 | Polynt Composites | EPOTUF® 37-612 is a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® epoxy resins. | |
| EPOTUF® 37-640 | Polynt Composites | EPOTUF® 37-640 is a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® epoxy resins. | |
| SR9053 | Sartomer Americas | SR9053 is a trifunctional acid ester that enhances adhesion of adhesive and coating formulations to metal, plastic, rubber, and glass. SR9053 is not recommended for use with amines. | |
| RESYDROL® VAF 5540w/70MP | Allnex | Resydrol® VAF 5540W/70MP is a non-drying alkyd resin, after neutralization with amines water-thin-able. It is an additional resin for waterdilutable primer surfacers to improve levelling. | Request Sample |
| EPOTUF® 37-621 | Polynt Composites | EPOTUF® 37-621 is a solution of high molecular weight polyamide resin based on dimerized fatty acids and polyethylene amines for room-temperature curing of EPOTUF® solid epoxy resins. | |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| UROTUF® L54-MPW-32 | Polynt Composites | UROTUF® L54-MPW-32 is a fully reacted, aliphatic thermoplastic urethane dispersed in a blend of water, N-methyl pyrrolidone, and amines. This resin is suitable for both air-dry and force-dry applications. | |
| MONOMETHYLETHANOLAMINE | Huntsman Performance Products | Monomethylethanolamine is a clear, colorless liquid with an ammoniacal odor. It is miscible with water, alcohols, ethers, and aromatic solvents. Since it contains both a secondary amine group and a hydroxyl group, it undergoes reactions typical of both am...view more Monomethylethanolamine is a clear, colorless liquid with an ammoniacal odor. It is miscible with water, alcohols, ethers, and aromatic solvents. Since it contains both a secondary amine group and a hydroxyl group, it undergoes reactions typical of both amines and alcohols. view less | |
| Hydro-Rez™ 1200D2 A | Lawter | Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on th...view more Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product has the benefit of providing low odor, gloss, adhesion, transparency, fast drying speed and water, rub and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1200D2 A is suitable for use in water-based coatings and primers and in water-based gravure and flexo inks. view less | |
| Hexatran™-100 | Ascend Performance Materials Operations LLC | Hexatran™-100 is an innovative trifunctional clear amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & com...view more Hexatran™-100 is an innovative trifunctional clear amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & compatibility. view less | |
| Hexatran™-300 | Ascend Performance Materials Operations LLC | Hexatran™-300 is an innovative trifunctional brown amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & com...view more Hexatran™-300 is an innovative trifunctional brown amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & compatibility. view less | |
| RESYDROL® VAF 6111w/60WA | Allnex | RESYDROL® VAF 6111W/60WA is an oxidatively drying alkyd resin as aqueous emulsion, free of amines and ammonia. It is especially suitable for waterborne flat, semi gloss and high gloss paints for wood, walls and ceilings. | Request Sample |
| Hexatran™-200 | Ascend Performance Materials Operations LLC | Hexatran™-200 is an innovative trifunctional straw-colored amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solven...view more Hexatran™-200 is an innovative trifunctional straw-colored amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & compatibility. view less | |
| ACCELERATOR 399 | Huntsman Performance Products | Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy system...view more Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy systems. view less | |
| JEFFAMINE® SD-231 POLYETHERDIAMINE | Huntsman Performance Products | JEFFAMINE® SD-231 Polyetheramine - Useful in coatings and polymer applications. It is a liquid difunctional amine, with each amine being secondary. Applications include being a chain extender for polyureas and polyurethanes with the benefits of low color ...view more JEFFAMINE® SD-231 Polyetheramine - Useful in coatings and polymer applications. It is a liquid difunctional amine, with each amine being secondary. Applications include being a chain extender for polyureas and polyurethanes with the benefits of low color and viscosity as well as slower reacting times than primary amines. view less | |
| N,N-DIMETHYLETHANOLAMINE | Huntsman Performance Products | DIMETHYLETHANOLAMINE (DMEA) is a clear, colorless, mobile liquid with an ammoniacal odor. It is miscible with water, alcohols, ether, and aromatic solvents. Since it contains both a tertiary amine group and a hydroxyl group, it undergoes reactions typical...view more DIMETHYLETHANOLAMINE (DMEA) is a clear, colorless, mobile liquid with an ammoniacal odor. It is miscible with water, alcohols, ether, and aromatic solvents. Since it contains both a tertiary amine group and a hydroxyl group, it undergoes reactions typical of amines and alcohols. view less | |
| 8102 | GIMEL Technical Materials | 8102 is an amino-functional acrylate used in paper varnishes and coatings. It effectively reduces oxygen inhibition and improves surface curing. It has a lower odor with no irritating amine odor. It is light in color with lower yellowing than ordinary ter...view more 8102 is an amino-functional acrylate used in paper varnishes and coatings. It effectively reduces oxygen inhibition and improves surface curing. It has a lower odor with no irritating amine odor. It is light in color with lower yellowing than ordinary tertiary amines. view less | Request Sample |
| CN704 | Sartomer Americas | CN704 is an acrylated polyester adhesion promoter that provides excellent adhesion to polyolefins, such as polyethylene and polypropylene. CN704 is designed for UV/EB cured inks and coatings. Due to its low acid value, CN704 can be used in formulations co...view more CN704 is an acrylated polyester adhesion promoter that provides excellent adhesion to polyolefins, such as polyethylene and polypropylene. CN704 is designed for UV/EB cured inks and coatings. Due to its low acid value, CN704 can be used in formulations containing tertiary amines. view less | |
| IDROBEN 3519 | Benasedo | IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube...view more IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube and can enamels. view less | |
| Bisphenol A Epoxy Resin SM827 | Jiangsu Sanmu Group Corporation | Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, la...view more Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, laminates, electrical and electronics. view less | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...view more CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| GABEPRO® GPM-800 | Gabriel Performance Products | GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...view more GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| GABEPRO® GPM-8003 | Gabriel Performance Products | GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...view more GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...view more EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and view less | Request Sample |
| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...view more ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. view less | |
| RESYDROL® AX 246w/70BG | Allnex | Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade...view more Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. view less | Request Sample |
| RESYDROL® AX 247w/70BGMP | Allnex | Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-gra...view more Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. view less | Request Sample |
| JEFFAMINE® SD-401 POLYETHERDIAMINE | Huntsman Performance Products | JEFFAMINE® SD-401 Polyetheramine - Useful in coatings and polymer applications. It is a liquid difunctional amine, with each amine being secondary. Applications include acting as a chain extender for polyureas and polyurethanes as well as an anti-sag agen...view more JEFFAMINE® SD-401 Polyetheramine - Useful in coatings and polymer applications. It is a liquid difunctional amine, with each amine being secondary. Applications include acting as a chain extender for polyureas and polyurethanes as well as an anti-sag agent for polyurethanes. Benefits include low color and viscosity as well as it is slower reacting than primary amines. view less | |
| JEFFAMINE® SD-2001 POLYETHERAMINE | Huntsman Performance Products | JEFFAMINE® SD-2001 Polyetheramine - Useful in coatings and polymer applications. It is a liquid difunctional amine, with each amine being secondary. Applications include acting as a chain extender for polyureas and polyurethanes and inclusion in isocyanat...view more JEFFAMINE® SD-2001 Polyetheramine - Useful in coatings and polymer applications. It is a liquid difunctional amine, with each amine being secondary. Applications include acting as a chain extender for polyureas and polyurethanes and inclusion in isocyanate prepolymer formations with benefits of low color and viscosity, slower reaction times than primary amines and lower viscosity isocyanate prepolymers. view less | |
| Doversperse H-1015-P | Dover Chemical Corporation | Doversperse H-1015-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1015-P is primarily us...view more Doversperse H-1015-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1015-P is primarily used as a dispersant in various applications. view less | |
| Doversperse H-1035-P | Dover Chemical Corporation | Doversperse H-1035-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1035-P is primarily us...view more Doversperse H-1035-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1035-P is primarily used as a dispersant in various applications. view less | |
| Neopentane diamine | BASF Corporation, Chemical Intermediates | Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with ep...view more Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with epoxy resins. Due to its structure, it is less water-sensitive compared to non-branched aliphatic amines. view less | |
| GENORAD* 40 | Rahn USA Corp. | GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varn...view more GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varnishes, adhesives and overprint varnishes. It improves adhesion on metal. view less | Request Sample |
| JEFFAMINE® ST-404 POLYETHERAMINE (XTJ-586) | Huntsman Performance Products | JEFFAMINE® ST-404 Polyetheramine - Useful in coatings and polymer applications. It is a liquid tri-functional amine, with each amine being secondary. Applications include acting as a curing agent/cross-linker for polyureas and polyurethanes, a crosslinkin...view more JEFFAMINE® ST-404 Polyetheramine - Useful in coatings and polymer applications. It is a liquid tri-functional amine, with each amine being secondary. Applications include acting as a curing agent/cross-linker for polyureas and polyurethanes, a crosslinking agent for polymers and an anti-sag agent for polyurethanes with benefits of low color and viscosity as well as slower reaction times than primary amines. view less | |
| Nuodex® Manganese 0.5 | Huntsman Pigments & Additives | Nuodex® Manganese 0.5 is a low viscosity, red-brown coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Manganese 0.5 is to be used in combination with Calcium, Strontium, Zirconium and Amines. M...view more Nuodex® Manganese 0.5 is a low viscosity, red-brown coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Manganese 0.5 is to be used in combination with Calcium, Strontium, Zirconium and Amines. Manganese 0.5 is also effective as a drier in printing ink applications. view less | |
| Durham Nuodex® Manganese 8 Neo | Huntsman Pigments & Additives | Durham Nuodex® Manganese 8 Neo is a low viscosity, red-brown coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Manganese is to be used in combination with calcium, strontium, zirconium and amin...view more Durham Nuodex® Manganese 8 Neo is a low viscosity, red-brown coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Manganese is to be used in combination with calcium, strontium, zirconium and amines. Manganese is also effective as a drier in printing ink applications. view less | |
| EPOTUF® 37-625 | Polynt Composites | EPOTUF® 37-625 is a reactive polyamide resin based on dimerized fatty acid and polyethylene amines that can be used in adhesives, sealants, grouts, mortars, flooring, surfacing, and marine or maintenance coatings, among other applications. This product ha...view more EPOTUF® 37-625 is a reactive polyamide resin based on dimerized fatty acid and polyethylene amines that can be used in adhesives, sealants, grouts, mortars, flooring, surfacing, and marine or maintenance coatings, among other applications. This product has good adhesion, a good balance of hardness and flexibility, and good impact resistance. view less | |
| Telalit 3404 X 70 | Spolchemie | Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. T...view more Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. Telalit 3404 X 70 is primarily used in the formulation of two-component anti-corrosive epoxy coatings. view less | |
| ADDAPT® Foamstop™ 600N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a w...view more ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a wide pH range, and it does not contain mineral oil, amines, nitrates, or fluorides. view less | |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less | Request Sample |
| Ancamine™ 2264 | Evonik Operations GmbH, BL Crosslinkers | Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffnes...view more Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffness and elevated temperature performance in cured systems, compared with cycloaliphatic diamine-cured systems. Applications for this product include filament winding, resin transfer molding, potting for tooling, electrical and general industrial applications. view less | Request Sample |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...view more BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. view less | Request Sample |
| DMAMP-80® | ANGUS Chemical Company | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less | |
| GABEPRO® GPM-800LO | Gabriel Performance Products | GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and...view more GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. GPM-800LO is formulated to have an improved odor relative to our standard product. view less | |
| GABEPRO® GPM-888 | Gabriel Performance Products | GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low te...view more GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. This material is formulated to cure epoxy resin in approximately 5 minutes. view less | |
| EPOTUF® 91-263 | Polynt Composites | EPOTUF® 91-263 is a water-reducible epoxy ester formulated without HAPs, which is designed for used in VOC-compliant coatings after it has been neutralized with the proper amines. It can also be used in printing inks. This product provides good corrosion ...view more EPOTUF® 91-263 is a water-reducible epoxy ester formulated without HAPs, which is designed for used in VOC-compliant coatings after it has been neutralized with the proper amines. It can also be used in printing inks. This product provides good corrosion resistance and dries quickly. It adheres well to a variety of substrates, including polypropylene. view less | |
| ADDAPT® Foamstop™ 100N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usab...view more ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usable over a wide pH range, biodegradable, and it does not contain mineral oil, amines, nitrates, or fluorides. view less | |
| EPOTUF® 38-699 | Polynt Composites | EPOTUF® 38-699 is a water-dispersible epoxy ester resin for metal primer applications. This resin is supplied at 70% non-volatile in butoxy ethanol and requires neutralization with ammonium hydroxide or amines prior to dispersing in water. This resin exhi...view more EPOTUF® 38-699 is a water-dispersible epoxy ester resin for metal primer applications. This resin is supplied at 70% non-volatile in butoxy ethanol and requires neutralization with ammonium hydroxide or amines prior to dispersing in water. This resin exhibits good compatibility with inhibitive pigments. Temperatures during the grind phase should not exceed 140°F. view less | |
| D.E.H.™ 29 | Univar Solutions | D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other appl...view more D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other applications where color is not a limitation. In adhesives, it yields much higher peel strength than DETA or TETA at comparable gel times and lower cost. view less | Request Sample |
| LUNA-CURE DMP-30 | DKSH | LUNA-CURE DMP-30 is used to accelerate the speed of the cure of epoxy resins and improve the strength of the cured material. It can also be used to catalyze acid- or anhydride curing of epoxy systems. LUNA-CURE DMP-30 also finds use as a hardening agent f...view more LUNA-CURE DMP-30 is used to accelerate the speed of the cure of epoxy resins and improve the strength of the cured material. It can also be used to catalyze acid- or anhydride curing of epoxy systems. LUNA-CURE DMP-30 also finds use as a hardening agent for polyamides, poly mercaptans, and fatty amines, and as a trimerization catalyst for polyurethanes. view less | Request Sample |
| Lanco™ LiquiMatt 6375 AF | Lubrizol Advanced Materials, Inc. | Lanco™ LiquiMatt 6375 AF is an aqueous dispersion of wax-treated silica used to efficiently control gloss in aqueous coatings. Unlike many powders used in aqueous coatings, LiquiMatt ™6375 AF does not need high shear for incorporation and will not generat...view more Lanco™ LiquiMatt 6375 AF is an aqueous dispersion of wax-treated silica used to efficiently control gloss in aqueous coatings. Unlike many powders used in aqueous coatings, LiquiMatt ™6375 AF does not need high shear for incorporation and will not generate foam during the dispersion process. The product is free of amines and suitable for coatings where low emissions are required. view less | |
| CN153 | Sartomer Americas | CN153 is an epoxy acrylate oligomer that has both acrylate and epoxy functionality on the same backbone. The epoxy ring will readily react with amines or acids. The CN153 is mainly used in systems where dual cure is necessary to achieve a thorough cure or...view more CN153 is an epoxy acrylate oligomer that has both acrylate and epoxy functionality on the same backbone. The epoxy ring will readily react with amines or acids. The CN153 is mainly used in systems where dual cure is necessary to achieve a thorough cure or lower shrinkage. Suggested applications include adhesives, laminating and pressure sensitive adhesives, coatings, metal, plastic and wood coatings, electronics, and screen inks. view less | |
| WorléeSol 61 E | Worlée-Chemie G.m.b.H. | WorléeSol 61 E is an air drying, special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 E show a very fast drying and through drying with excellent corrosion resistance. Due to ...view more WorléeSol 61 E is an air drying, special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 E show a very fast drying and through drying with excellent corrosion resistance. Due to it’s excellent wetting properties W´Sol 61 E is especially suitable for the manufacture of haze-free high gloss lacquers. view less | |
| KRONOClean® 7000 | Kronos International, Inc. | KRONOClean® 7000 is a photocatalyst displaying not only activity in UV radiation, but also pronounced photoactivity in visible light. It is suitable for use in applications for eliminating unwanted odours (e.g. kitchen smells) and soiling on surfaces (e....view more KRONOClean® 7000 is a photocatalyst displaying not only activity in UV radiation, but also pronounced photoactivity in visible light. It is suitable for use in applications for eliminating unwanted odours (e.g. kitchen smells) and soiling on surfaces (e.g. nicotine), for air purification (amines, aldehydes, nitrogen oxides, mercaptans, etc.) and for improving room air quality (interior paints) in conjunction with paper, plastic films, window profiles, fibres, etc. view less | |
| AEPD® VOX 1000 | ANGUS Chemical Company | AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply...view more AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply with EU directive 2004/42/EC. Compared with other neutralizing amines, AEPD® VOX 1000 Neutralizing Amine offers one of the best all-round performances when taking odor, VOC, wet paint and dry film properties into account. view less | |
| Bulab® 600 | Buckman Laboratories, Inc. | Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is s...view more Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amines or tin catalysts. view less | |
| EPOTUF® 37-618 | Polynt Composites | EPOTUF® 37-618 is a polyamide curing agent in solution, based on dimerized fatty acids and poylethylene amines, which can be used in room-temperature curing of solid epoxy resins. It is designed for use in chemical and corrosion-resistant coatings, adhesi...view more EPOTUF® 37-618 is a polyamide curing agent in solution, based on dimerized fatty acids and poylethylene amines, which can be used in room-temperature curing of solid epoxy resins. It is designed for use in chemical and corrosion-resistant coatings, adhesives, electrical encapsulation, potting and casting, flooring compounds, tank coatings, and pipe coatings. This product shows good compatibility with solid epoxy resins, resulting in lower induction times, and it dries quickly. view less | |
| UROTUF® L55 | Polynt Composites | UROTUF® L55 is a fully reacted, aliphatic polyurethane dispersion in a blend of water, amines, and N-methylpyrrolidone. This product should be used as a base resin in formulating coatings for plastics, leather and fabrics. It can also be used as an adhesi...view more UROTUF® L55 is a fully reacted, aliphatic polyurethane dispersion in a blend of water, amines, and N-methylpyrrolidone. This product should be used as a base resin in formulating coatings for plastics, leather and fabrics. It can also be used as an adhesive for flexible films and laminates. UROTUF® L55 features good wet adhesion and low-temperature flexibility. It is color-retentive, with low hardness and high elongation. view less | |
| AFCONA - 1503 | AFCONA Additives Sdn Bhd | AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of ...view more AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of tinting systems where low shear force is used, and in systems with a wide pH range. AFCONA - 1503 finds application in water- and solvent-based decorative paint systems. view less | |
| SR9050 | Sartomer Americas | SR9050 is a monofunctional adhesion promoting monomer that provides exceptional adhesion to metal substrates, including aluminum, brass, tin-free steel and steel. This product is designed for UV/EB cured inks and coatings. SR9050 offers high flexibility, ...view more SR9050 is a monofunctional adhesion promoting monomer that provides exceptional adhesion to metal substrates, including aluminum, brass, tin-free steel and steel. This product is designed for UV/EB cured inks and coatings. SR9050 offers high flexibility, high impact strength, and low shrinkage for laminating adhesives and metal and glass coating applications. Due to its high acid value, this product is not recommended for use in formulations containing tertiary amines. view less | |
| UROTUF® L51 | Polynt Composites | UROTUF® L51 is a fully reacted, aliphatic thermoplastic urethane dispersed in a blend of water, amines, and N-methylpyrrolidone. This product can be used in clear or pigmented coatings for plastics, clear or pigmented bake finishes for aluminum or steel, ...view more UROTUF® L51 is a fully reacted, aliphatic thermoplastic urethane dispersed in a blend of water, amines, and N-methylpyrrolidone. This product can be used in clear or pigmented coatings for plastics, clear or pigmented bake finishes for aluminum or steel, and slip finishes on flexible films and leather. This product reduces in water, and is compatible with anionic pigments and dispersing agents. It can be cross-linked with melamine, polyaziridine, and carbodiimide resins. view less | |
| GENOMER* 7151 | Rahn USA Corp. | GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use...view more GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use in the following applications: printing inks for glass, metals and metalized substrates; protective coatings for metals; and wood coatings. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less | Request Sample |
| EFKA® PL 5382 | BASF Formulation Additives | EFKA® PL 5382 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ...view more EFKA® PL 5382 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ageing. It is compatible with PVC, many other plastics, synthetic resins, plasticizers and gives transparent films. It can be hardened with acids, anhydrides, and amines. Moreover, it remains stable even at higher temperatures. view less | |
| UROTUF® L-512 | Polynt Composites | UROTUF® L-512 is a fully-reacted, aliphatic and thermoplastic urethane resin that has been dispersed in a blend of water, n-methylpyrrolidone and amines. This product offers abrasion resistance, chemical resistance and stain resistance and is compatible w...view more UROTUF® L-512 is a fully-reacted, aliphatic and thermoplastic urethane resin that has been dispersed in a blend of water, n-methylpyrrolidone and amines. This product offers abrasion resistance, chemical resistance and stain resistance and is compatible with anionic pigments and dispersants. It can be used in clear wood floor finishes, clear and pigmented coatings for plastics, clear and pigmented bake finishes for aluminum and steel, and slip finishes on flexible films and leather. view less | |
| EBECRYL® 4587 | Allnex | EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance...view more EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation of UV/EB energy curable waterborne coatings free of reactive diluents, solvents and amines, as clear or pigments systems in glossy or matt finishes. view less | Request Sample |
| CD9055 | Sartomer Americas | CD9055 is an acidic acrylate that will promote adhesion to a number of different substrates, including metal and glass. It does not contain any (meth)acrylate monomers, thus giving formulators more latitude in use. The product should not be used in formul...view more CD9055 is an acidic acrylate that will promote adhesion to a number of different substrates, including metal and glass. It does not contain any (meth)acrylate monomers, thus giving formulators more latitude in use. The product should not be used in formulations with amines. CD9055 has good weatherability and low shrinkage that can be used for laminating and pressure sensitive adhesives, wood, plastic, and metal coatings, as well as flexo, letterpress, offset, and rotary screen inks. view less | |
| Borchi® Kat 0245 | Borchers, A Company of OMG | Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyuret...view more Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. This product is suitable for automotive refinishing and industrial coating. In these formulations, Borchi® Kat 0245 is characterized by its very good and consistent activity and stability, even after prolonged storage. view less | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...view more Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. view less | |
| Betasol TEOx® | Grupo Petroquimico Beta SA de CV | Betasol TEOx®is an alkanolamine organic base and slightly viscose, that is used in the manufacturing industries for agrochemicals, detergents, soaps, articles for vanity tables, fluids for cut, additives for cement lubricants in textiles. Betasol TEOx® co...view more Betasol TEOx®is an alkanolamine organic base and slightly viscose, that is used in the manufacturing industries for agrochemicals, detergents, soaps, articles for vanity tables, fluids for cut, additives for cement lubricants in textiles. Betasol TEOx® combines the properties of amines and alcohols and offers the capacity to undergo reactions common to both of those groups. As an amine, TEOx® is a gently alkaline reaction with acids to form soaps. As an alcohol, it's hygroscopic. Betasol TEOx® is totally soluble in water and miscible with most forms of organic solvents . view less | |
| GB nC4-OL™ | Green Biologics | GB nC4-OL™ is 100% renewable n-butanol produced through fermentation of C5 and C6 sugars by Green Biologics' proprietary Clostridium microbial biocatalysts. N-butanol is a 4 carbon, straight chain alcohol used extensively as a solvent and as an intermedia...view more GB nC4-OL™ is 100% renewable n-butanol produced through fermentation of C5 and C6 sugars by Green Biologics' proprietary Clostridium microbial biocatalysts. N-butanol is a 4 carbon, straight chain alcohol used extensively as a solvent and as an intermediate in the production of monomers, polymeric emulsions, esters, and glycol ethers. It is also used in the production of amino resins used as curing agents in paints and coatings, and as an intermediate in the production of plasticizers and amines. view less | |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...view more Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. view less | |
| Borchi® Kat 24 | Borchers, A Company of OMG | Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexi...view more Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. view less | |
| Borchi® Kat 320 | Borchers, A Company of OMG | Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be ...view more Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 320 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® Kat 315 | Borchers, A Company of OMG | Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat...view more Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 315 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 315 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| NACURE® 2530 | King Industries, Inc. | NACURE® 2530 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant and appears as a clear, straw liquid. It has a low pH which allows for faster cure and reduces the potential of wrinkling from volatile amines, particularly at cure temperatures...view more NACURE® 2530 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant and appears as a clear, straw liquid. It has a low pH which allows for faster cure and reduces the potential of wrinkling from volatile amines, particularly at cure temperatures of 121° C (250° F) or higher. This product can be applied in appliance finishes, coil coatings, can coatings, wood coatings, paper coatings, automotive topcoats, and general industrials. It is soluble in alcohols, esters, glycols, glycol ethers, and water. It is partially soluble in ketones and insoluble in aliphatic and aromatic hydrocarbons. view less | |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| Borchi® Kat 0244 | Borchers, A Company of OMG | Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. The use of Borchi® Kat 0244 ensures fast blocking stability of polyurethane coatings. It also improves solvent resistance, high film hardness and early sandability of the coating. This product is suitable for automotive refinishing. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| Hydro-Rez™ 1100D A | Lawter | Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the pre...view more Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product gives off a low odor, gloss, fast drying speed, rub, transparency, adhesion and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1100D A is suitable for use in water-based coatings and primers as well as water-based gravure and flexo inks. view less | |
| AAEM | DKSH | AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for se...view more AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for self-crosslinkable, room temperature cure acrylic emulsions. It also finds use in acetoacetylated polymers crosslinked through chelation with metal ions and for acetoacetylated polymers for producing colorfast fibers (azo-dye). AAEM readily polymerizes with other acrylic and methacrylic monomers. Chemical name: Acetoacetoxyethyl Methacrylate. This product is available in Europe, Asia and North America. view less | Request Sample |
| Borchi® Kat 0243 | Borchers, A Company of OMG | Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. Borchi® Kat 0243 accelerates the chemical reaction between the alcohol and isocyanate component of polyurethane coating systems, thus allowing optimum steering of the drying properties, both during force-drying and curing at room temperature. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| Dispersogen® FSE | Clariant - Coatings & Construction Chemicals | Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE ...view more Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE is often used for inorganic pigments in combination with fatty amines like Genamin® CC 100 or Genamin® TA 100. Dispersogen® FSE offers a balanced viscosity to minimize sedimentation and at the same time enables dosing, pumping and feeding. A slightly alkaline pH of 7.5 - 8.5, adjusted by alkali like caustic soda, reduces the viscosity. view less | |
| EBECRYL® 7110 | Allnex | EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110 provides rap...view more EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, this product reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. It also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings. view less | Request Sample |
| SURFONAMINE® L-300 AMINE | Huntsman Performance Products | SURFONAMINE® L-300 AMINE is a hydrophilic polyether monoamine of approximately 3000 molecular weight. | |
| SURFONAMINE® B-200 Amine | Huntsman Performance Products | SURFONAMINE® B-200 Amine is a nominal 2000 molecular weight polyether monoamine for use in pigment modification. | |
| Genamin® O 020 Special | Clariant - Coatings & Construction Chemicals | Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic...view more Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Hydro-Rez™ 1400D A | Lawter | Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that...view more Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that pH neutral inks formulated with the product's resins don't need pH adjustment on the press. Hydro-Rez™ 1400D A provides gloss, low odor, adhesion, fast drying speed, rub, transparency and scuff resistance to coatings, inks and primers. It is suitable for use in waster-based coatings and primers and in water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 2140D A | Lawter | Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks...view more Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with resins from the product line don't need pH adjustment on the press. The product gives off a fast drying speed, low odor, adhesion, gloss, rub, transparency and scuff resistance to coatings, inks and primers. Hydro-Rez™ 2140D A is suitable for use in water-based primers and coatings and in water-based gravure and flexo inks. view less | |
| WorléeDex 1177 | Worlée-Chemie G.m.b.H. | WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient ...view more WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient water resistance and resolubility during the printing process and after the stop of the roller. Due to its good compatibility with many resins and pigments W´Dex 1177 is also suitable as a combination partner for acrylic resins. W´Dex 1177 is especially environmental friendly because of its renewable raw materials and it is free of amines/ammonia and ethylene glycol. view less | |
| SURFONAMINE® B-100 Amine | Huntsman Performance Products | SURFONAMINE® B-100 Amine is a relatively hydrophobic monamine of about 1000 molecular weight derived for ma PO adduct of nonylphenol for use in pigment modification. | |
| SURFONAMINE® L-207 Surfactant Amine | Huntsman Performance Products | SURFONAMINE® L-207 Surfactant Amine is a relatively hydrophilic polyether monoamine of approximately 2,000 molecular weight. It is a liquid at room temperature, with moderate viscosity and low vapor pressure, and is essentially colorless. | |
| Genamin® O 200 | Clariant - Coatings & Construction Chemicals | Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic...view more Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| ECA 29 Epoxy Curing Agent | Univar Solutions | ECA 29 Epoxy Curing Agent is a mixture of aliphatic polyamines derived from ethylenediamine, useful as an epoxy curing agent in applications where higher glass transition temperature and reasonably fast reactivity are needed with longer pot life. | Request Sample |
| Genamin® C 100 | Clariant - Coatings & Construction Chemicals | Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grad...view more Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® C 050 | Clariant - Coatings & Construction Chemicals | Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin gr...view more Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| SURFONAMINE® B-60 AMINE | Huntsman Performance Products | It is a moderately hydrophilic polyether monoamine of approximately 600 molecular weight. It is a low-color mobile liquid at room temperature. | |
| SURFONAMINE® L-100 AMINE | Huntsman Performance Products | It is a hydrophilic polyether monoamine of approximately 1000 molecular weight. It is a white waxy solid at room temperature, with moderate viscosity, low vapor pressure and low color. |
