| T Gum 102 | Tiarco Chemical | T Gum 102 is an alkali swellable acrylic latex thickener that can be used for any alkaline pH coating. It is handled easily at low pH and develops good viscosity when the total pH is adjusted to the alkaline side. This product has good mechanical stabilit...view more T Gum 102 is an alkali swellable acrylic latex thickener that can be used for any alkaline pH coating. It is handled easily at low pH and develops good viscosity when the total pH is adjusted to the alkaline side. This product has good mechanical stability and is consistent in the manufacturing process. view less | |
| Rockforce® MS610-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in r...view more Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in rheology control, dimensional stability, reinforcement, heat resistance, and chemical bonding with phenol and epoxy resins view less | |
| Aluminum Di Stearate Veg Based Powder | Acme Hardesty Co. | Aluminum Di Stearate Veg Based Powder is a fine white powder generally used for its lubricating and emulsion stabilizing properties. Its hydrophobic nature makes it a good thickener and coating ingredient in several cosmetic applications. It is mainly use...view more Aluminum Di Stearate Veg Based Powder is a fine white powder generally used for its lubricating and emulsion stabilizing properties. Its hydrophobic nature makes it a good thickener and coating ingredient in several cosmetic applications. It is mainly used in the formulation of makeup products such as eyeliner, mascara, lipsticks, mascara, face powders, and foundations. view less | Request Sample |
| ACRYSOL™ ASE-60 | Univar Solutions | ACRYSOL™ ASE-60 is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for latex coatings. When neutralized with a base, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly ...view more ACRYSOL™ ASE-60 is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for latex coatings. When neutralized with a base, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly shear-thinning characteristics. This product is delivered as a high-solids liquid for ease of handling in manufacturing. view less | Request Sample |
| Borchi® Gel L 75 N | Borchers, A Company of OMG | Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of...view more Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of dispersed particles formed as a result of emulsion polymerisation. lt is characterised by good efficiency. lt improves the rheological properties of emulsion paints, making the end-products easier to apply with a roller or a brush despite a considerable increase in viscosity. The product can be combined with other thickeners to achieve special effects. Since it improves the flow properties of emulsion paints, Borchi® Gel L 75 N has proved particularly useful for thickening acrylic gloss paints and anti-corrosion coatings. view less | |
| CELLOSIZE™ QP 15000H | Univar Solutions | CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ Q...view more CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 15000H HEC are 4 to 6 pounds per 100 gallons, and in personal care/household cleaners, the levels of CELLOSIZE™ QP 15000H HEC are typically between 0.5% and 1%. view less | Request Sample |
| KMP 15000M | Vink Chemicals GmbH & Co. KG | KMP 15000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties...view more KMP 15000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. view less | |
| KMP 6000M | Vink Chemicals GmbH & Co. KG | KMP 6000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties....view more KMP 6000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. view less | |
| KMP 150000M2 | Vink Chemicals GmbH & Co. KG | KMP 150000M2 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properti...view more KMP 150000M2 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. view less | |
| KMP 30000M4 | Vink Chemicals GmbH & Co. KG | KMP 30000M4 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic propertie...view more KMP 30000M4 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, and white render finishes. view less | |
| EFKA® RM 1463 | BASF Formulation Additives | EFKA® RM 1463 is a pre-activated polyamide wax thickener which is applicable in most solvent based synthetic resin systems and recommended for enhancing anti-sagging properties. It is suitable for industrial, architectural, heavy duty and marine coatings....view more EFKA® RM 1463 is a pre-activated polyamide wax thickener which is applicable in most solvent based synthetic resin systems and recommended for enhancing anti-sagging properties. It is suitable for industrial, architectural, heavy duty and marine coatings. EFKA® RM 1463 has a sharp needle network structure with hydrogen/oxygen bonding which creates good anti-sagging effects in finished paints. view less | |
| KCM 2000C | Vink Chemicals GmbH & Co. KG | KCM 2000C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...view more KCM 2000C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| KCM 1200C | Vink Chemicals GmbH & Co. KG | KCM 1200C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...view more KCM 1200C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| KCM 4000P | Vink Chemicals GmbH & Co. KG | KCM 4000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...view more KCM 4000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| KCM 6000P | Vink Chemicals GmbH & Co. KG | KCM 6000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...view more KCM 6000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| KCM 80000QD | Vink Chemicals GmbH & Co. KG | KCM 80000QD is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in indust...view more KCM 80000QD is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| Flexisperse™ 225 | Innovative Chemical Technologies, Inc. | Flexisperse™ 225 is a methacrylic acid polymer (9000 M.Wt.) which is a highly effective dispersant, anti-scalant, deflocculent, and rheology modifier. Produces stable dispersions and suspensions at high concentrations, with lower viscosities. | Request Sample |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...view more Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. view less | |
| Ethyl Acrylate | Henan Harvest Chem Co., LTD. | Ethyl Acrylate is a clear, colorless liquid with a pungent odor. This product has a molecular weight of 100.13. Ethyl Acrylate is used in the production of coatings, elastomers, adhesives, thickeners, superabsorbents, acrylic esters, and fiber sizing. | |
| Rockforce® MS675-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS675-Roxul®1000 is a premium quality engineered mineral fibre. It is a medium length fibre with extreme low shot content, surface treated with a surfactant for excellent dispersion in bitumen / asphalt. Rockforce® MS675-Roxul®1000 can be used ...view more Rockforce® MS675-Roxul®1000 is a premium quality engineered mineral fibre. It is a medium length fibre with extreme low shot content, surface treated with a surfactant for excellent dispersion in bitumen / asphalt. Rockforce® MS675-Roxul®1000 can be used in a number of coating applications. It is especially suitable for replacing asbestos and cellulose fibres in bituminous roof coatings and water proofing coatings. Rockforce® MS675-Roxul®1000 is easy to use no major increase of viscosity during production, excellent viscosity building characteristics and controlled rheology, levelling and sag resistance. view less | |
| RHEOVIS® VP 1231 | BASF Formulation Additives | RHEOVIS® VP 1231 is a modified vinylpyrrolidone-vinylacetate copolymer thickener with maximum thickening effect at a pH of about 5; can be used as protective colloid in the production of dispersions. | |
| TROYTHIX™ 150ACS | Arxada – Troy Corporation | TROYTHIX™ 150ACS is a pre-activated polyamide wax dispersion that effectively provides a highly thixotropic or shear thinning structure, resulting in excellent sag resistance and pigment suspension. The thixotropic nature of 150ACS results in excellent ap...view more TROYTHIX™ 150ACS is a pre-activated polyamide wax dispersion that effectively provides a highly thixotropic or shear thinning structure, resulting in excellent sag resistance and pigment suspension. The thixotropic nature of 150ACS results in excellent application properties view less | Request Sample |
| CELLOSIZE™ QP-100MH-V | Univar Solutions | CELLOSIZE™ QP-100MH-V is a very high molecular weight hydroxyethyl cellulose. The product is surface treated to avoid gel or lump formation when dissolved in aqueous systems. | Request Sample |
| #1 Castor Oil | Acme Hardesty Co. | #1 Castor Oil is one of the oldest and most versatile products in use today. It is a natural product, made from the beans of the castor plant which can be grown in any tropical region. As a natural polyol, it is commanding increasing attention as a highly...view more #1 Castor Oil is one of the oldest and most versatile products in use today. It is a natural product, made from the beans of the castor plant which can be grown in any tropical region. As a natural polyol, it is commanding increasing attention as a highly effective ingredient in polyurethane applications, replacing the traditional petroleum based polyols. This product can be used as a carrier for pigments and dyes in paints, coatings, and inks, and as an ingredient in alkyd resins used in varnishes and coatings. view less | Request Sample |
| AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. | Request Sample |
| GARAMITE® 1958 | BYK | GARAMITE® 1958 is a unique rheological additive developed for a wide range of solvent born systems. Compared to fumed silica and organoclays, GARAMITE® 1958 provides improved sag (drainage) resistance, control of settling, metallic orientation, and stabil...view more GARAMITE® 1958 is a unique rheological additive developed for a wide range of solvent born systems. Compared to fumed silica and organoclays, GARAMITE® 1958 provides improved sag (drainage) resistance, control of settling, metallic orientation, and stability. It is also more efficient and easier to handle in manufacturing (less dusty, higher bulk density and not sensitive to shear). view less | Request Sample |
| TROYTHIX™ 42BA | Arxada – Troy Corporation | TROYTHIX™ 42BA is a liquid designed to increase the viscosity of non-aqueous resin systems by means of a hydrogen bonding mechanism which couples together molecules of the vehicle. Other rheological properties are normally not affected. | Request Sample |
| EFKA® RM 1920 | BASF Formulation Additives | EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films ...view more EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films on vertical surfaces is effectively prevented whilst the working and flow properties are also generally improved. Pigment settling is also substantially reduced. EFKA® RM 1920 can be used in most non-aqueous coatings both with and without solvents. The lower the polarity of the coating, the better is its performance. view less | |
| TARGON® G 5 | ICL Phosphate Specialty | TARGON® G 5 is a secondary retarder based on condensed phosphates. It is a white, fine, non-hygroscopic powder. It is a secondary retarder component for premixed gypsum plaster. This product has a dispersing effect on the solid content of the plaster. It ...view more TARGON® G 5 is a secondary retarder based on condensed phosphates. It is a white, fine, non-hygroscopic powder. It is a secondary retarder component for premixed gypsum plaster. This product has a dispersing effect on the solid content of the plaster. It achieves constant setting and prolongs the treating time between cutting and felting. TARGON® G 5 also improves the finishing treating qualities. view less | Request Sample |
| TARGON® GA 1 | ICL Phosphate Specialty | TARGON® GA 1 is a setting retarded based on sodium phosphate, hydroxipolycarbonacid and anticaking agent. This white powder can be combined with TYLOSE® MC-types and other processing auxiliaries e.g. tensides. It is a setting retarder for gypsum plaster w...view more TARGON® GA 1 is a setting retarded based on sodium phosphate, hydroxipolycarbonacid and anticaking agent. This white powder can be combined with TYLOSE® MC-types and other processing auxiliaries e.g. tensides. It is a setting retarder for gypsum plaster which is free or reduced of calciumhydroxide (manually and machine applied) and for plaster adhesives. view less | Request Sample |
| TARGON® G 2 | ICL Phosphate Specialty | TARGON® G 2 os a special product based on condensed phosphates with anticaking agent possessing hydrophobic properties. It is a white, fine powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It avoids...view more TARGON® G 2 os a special product based on condensed phosphates with anticaking agent possessing hydrophobic properties. It is a white, fine powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It avoids sudden blocking, achieves constant setting, prolongs the treating time between cutting and felting and improves the finishing treating qualities. view less | Request Sample |
| TARGON® G | ICL Phosphate Specialty | TARGON® G is a special product based on condensed phosphates with anticaking agent. It is a white, fine, hygroscopic powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It achieves constant setting, pr...view more TARGON® G is a special product based on condensed phosphates with anticaking agent. It is a white, fine, hygroscopic powder with good flowability. This product is a secondary retarder component for premixed gypsum plaster. It achieves constant setting, prolongs the treating time between cutting and felting and improves the finishing treating qualities. view less | Request Sample |
| Bubreak® 401 | Buckman Laboratories, Inc. | Bubreak® 401 is a concentrated liquid, highly cationic polymer that can be used as a flocculant or coagulant in effluent treatment programs. Bubreak 401 can be used in waste minimization programs for water-based paints, adhesives, or similar water-based s...view more Bubreak® 401 is a concentrated liquid, highly cationic polymer that can be used as a flocculant or coagulant in effluent treatment programs. Bubreak 401 can be used in waste minimization programs for water-based paints, adhesives, or similar water-based systems. A 10% (by weight) solution of Bubreak 401 should be made prior to application of this product. This product is readily soluble in water and this reduction allows the polymer to “unwind” to provide better flocculating properties. Use levels of this solution will vary from .01% to 2.0%, based on weight of the material to be treated. view less | |
| KMP 100000N | Vink Chemicals GmbH & Co. KG | KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...view more KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. view less | |
| KMP 150000N | Vink Chemicals GmbH & Co. KG | KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...view more KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. view less | |
| KMP 100000 | Vink Chemicals GmbH & Co. KG | KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...view more KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, and white render finishes. view less | |
| KMP 400 | Vink Chemicals GmbH & Co. KG | KMP 400 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic prope...view more KMP 400 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in self-leveling applications. view less | |
| KMP 75000 | Vink Chemicals GmbH & Co. KG | KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pro...view more KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. view less | |
| KMP 15000 | Vink Chemicals GmbH & Co. KG | KMP 15000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pro...view more KMP 15000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in mortars, fillers, and plasters. view less | |
| KMP 200000 | Vink Chemicals GmbH & Co. KG | KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...view more KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, plasters, and white render finishes. view less | |
| TARGON® B 350 | ICL Phosphate Specialty | TARGON® B 350 is a retarder for gypsum formulations containing Ca(OH)2. It is recommended for formulations where a very rapid setting is needed, e.g. anhydrite floor screed. | Request Sample |
| Targon® 812 | ICL Phosphate Specialty | Targon® 812 is a setting retarder for gypsum plasters which are free of calciumhydroxide. It can also be used as retarder for cement-based products. Targon® 812 achieves constant setting, prolongs the working time, and improves the finishing treatment qua...view more Targon® 812 is a setting retarder for gypsum plasters which are free of calciumhydroxide. It can also be used as retarder for cement-based products. Targon® 812 achieves constant setting, prolongs the working time, and improves the finishing treatment qualities. view less | Request Sample |
| Cimsil G50 | Tolsa SA | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
| CELLOSIZE™ EP-09 | Univar Solutions | CELLOSIZE™ EP-09 is a hydroxyethyl cellulose used in paints, graphic arts, and adhesives. | Request Sample |
| HS971 | Tianyi Chemical Engineering Material Co., Ltd. | HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...view more HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. view less | |
| HS973 | Tianyi Chemical Engineering Material Co., Ltd. | HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...view more HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. view less | |
| HS975 | Tianyi Chemical Engineering Material Co., Ltd. | HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...view more HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. view less | |
| Natrosol™ FPS Plus 330 | Ashland | Natrosol™ FPS Plus 330 is a aqueous dispersions of cellulosic water-soluble polymers for use as latex paint thickeners. | |
| LAPONITE® EP | BYK | LAPONITE® EP is a layered silicate manufactured from naturally occurring mineral sources with a proprietary organic modification. LAPONITE® EP is designed to give Extra Performance and enhanced rheology control under “harsh conditions”. This product is u...view more LAPONITE® EP is a layered silicate manufactured from naturally occurring mineral sources with a proprietary organic modification. LAPONITE® EP is designed to give Extra Performance and enhanced rheology control under “harsh conditions”. This product is used to improve the performance and stability of a wide range of water based formulated products. view less | Request Sample |
| CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL pa...view more CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| Borchi® Gel LW 44 | Borchers, A Company of OMG | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and c...view more Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. view less | |
| RHEOVIS® PE 1320 NC | BASF Formulation Additives | RHEOVIS® PE 1320 NC is specifically designed to improve high brush drag (ICI viscosity) in modern coatings. It is used either alone or blended with any other RHEOVIS® associative thickener. It offers complete control of the rheological properties of a coa...view more RHEOVIS® PE 1320 NC is specifically designed to improve high brush drag (ICI viscosity) in modern coatings. It is used either alone or blended with any other RHEOVIS® associative thickener. It offers complete control of the rheological properties of a coating with excellent application hiding, flow and leveling properties, resistance properties, roller application, and spatter resistance chemical nature. view less | |
| AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520 is a special, structured, highly filled dispersion of hydrophobic AEROSIL® fumed silica. It can be used for rheology control, anti-settling, pigment stabilization and improves the mechanical properties. | Request Sample |
| CRAYVALLAC® SUPER | Arkema Rheology & Specialty Additives | CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net...view more CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® ULTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result...view more CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| Borchi® Gel ALA | Borchers, A Company of OMG | Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film...view more Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film structure and minimizes spatter during application of emulsion paints, lacquers and printing inks. The optimization of flow characteristics results in a significant improvement in optical properties, particularly in high gloss emulsion systems. view less | |
| AM-71 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in...view more AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in leather base coat or topcoat applications at levels from 1-3% to increase viscosity and enhance the rheology properties of the coating. view less | |
| AGOCEL® AC 1147 | CHT USA (formerly ICM) | AGOCEL® AC 1147 is a rheology additive for architectural latex-based paints. It is an off-white powder. | Request Sample |
| Pyrogenic Silica RS-50 | Vitro Minerals | Pyrogenic Silica RS-50 is a 100% recycled synthetic, hydrophilic silica in the form of a white, submicron-sized powder. This product serves as a thickening agent in various polymer systems, including adhesives, sealants, and coatings. | |
| CRAYVALLAC® LV | Arkema Rheology & Specialty Additives | CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It impart...view more CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the ra...view more CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...view more CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| BENTONE® DY | Elementis | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| MULTIFLOW® Resin | Allnex | Multiflow® Resin is a low viscosity flow modifier for non-aqueous industrial coatings. It is used for high quality industrial finishes and multiflow resins. | Request Sample |
| Betacel® H 30 D | Grupo Petroquimico Beta SA de CV | Betacel® H 30 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is...view more Betacel® H 30 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is that it is a very excellent rheology modifier generating shear thinning solutions, it acts as a protective colloid and stabilizer, it has and excellent property of water-retension as well as good compatibility with surfactants, inorganic salts, rubbers and resins. This product has a viscosity of 1,500-2,500 cps. at 25C and is for use in construction and paint products. view less | |
| CLAYTONE-40 | BYK | CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. | Request Sample |
| ACRYSOL™ ASE-75 | Univar Solutions | ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in imp...view more ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in improving mid to low shear rate (Brookfield) viscosity, resulting in coatings that have highly shear thinning characteristics. view less | Request Sample |
| ACRYSOL™ I-62 A | Univar Solutions | ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially...view more ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially useful in formulations designed for thermosetting applications. It is a waterborne colloidal dispersion containing both carboxylic acid and hydroxyl functionality, and as such will crosslink with melamine-formaldehyde or urea-formaldehyde resins, thereby becoming part of the polymer matrix and improving the film properties. view less | Request Sample |
| BENTONE® MA | Elementis | BENTONE® MA is a rheological additive based on a purified hectorite clay that imparts thixotropy and good anti-settling properties to water-borne systems. | Request Sample |
| VANZAN® D | Vanderbilt Minerals, LLC | VANZAN® D is a xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extre...view more VANZAN® D is a xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH and temperature ranges. VANZAN® D is an easily dispersible grade that is activated when the pH of the system is elevated. view less | Request Sample |
| VANZAN® | Vanderbilt Minerals, LLC | VANZAN® is a standard grade xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as ...view more VANZAN® is a standard grade xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH and temperature ranges. view less | Request Sample |
| CoatForce® CF30 | Lapinus Fibres BV | CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various pain...view more CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various paint and coating systems. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| CoatForce® CF50 | Lapinus Fibres BV | CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various p...view more CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various paint and coating systems. CoatForce® CF50 has an off-white colour and very low shot content. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| CoatForce® CF10 | Lapinus Fibres BV | CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. Th...view more CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. The off-white colour makes it especially suitable for decorative applications. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| Rockforce® MS640-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and im...view more Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and improved thermal resistance of the product. Rockforce® MS640-Roxul®1000 reduces the speed of deterioration of the rubber matrix, since engineered mineral fibres are not susceptible to ageing under the applied conditions. view less | |
| Rockforce® MS750-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of ch...view more Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of chemical composition, shot content, and fibre length. view less | |
| Rockforce® RF840-Roxul®1000 | Lapinus Fibres BV | Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a signi...view more Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a significant better flexible strength and higher compression strength. Rockforce® RF840-Roxul®1000 is consistent in terms of chemical composition, surface treatment, purity, and fibre length. view less | |
| Gasil® 23FP | PQ Corporation | Gasil® 23FP is a general purpose silica gel used for thickening, carrying, and anti-caking (free-flow) in food and pharmaceuticals. Gasil® 23FP silicon dioxide complies with current FCC (Food Chemicals Codex) and USP (US Pharmacopeia) standards and is acc...view more Gasil® 23FP is a general purpose silica gel used for thickening, carrying, and anti-caking (free-flow) in food and pharmaceuticals. Gasil® 23FP silicon dioxide complies with current FCC (Food Chemicals Codex) and USP (US Pharmacopeia) standards and is acceptable for use as a food additive in with 21CFR172.480. view less | |
| CRAYVALLAC® PA4 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 p...view more CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
| HDK® N20D | Wacker Chemical Corporation | HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such...view more HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such as adhesives, adsorption agents, decorative cosmetics, inkjet, coatings and wind power. view less | Request Sample |
| BENTONE® DH | Elementis | BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrifici...view more BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrificing performance . It is also crystalline silica-free; therefore, there are no Prop 65 reporting requirements. It is also compatible with a wide variety of rheological modifiers. Starting point formulations are available upon request. view less | Request Sample |
| Betacel® H 50 D | Grupo Petroquimico Beta SA de CV | Betacel® H 50 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is...view more Betacel® H 50 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is that it is a very excellent rheology modifier generating shear thinning solutions, it acts as a protective colloid and stabilizer, it has and excellent property of water-retension as well as good compatibility with surfactants, inorganic salts, rubbers and resins. This product has a viscosity of 2,600-3,300 cps. at 25C and is for use in personal care, home care and paint products. view less | |
| Betacel® H 100 D | Grupo Petroquimico Beta SA de CV | Betacel® H 100 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H i...view more Betacel® H 100 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is that it is a very excellent rheology modifier generating shear thinning solutions, it acts as a protective colloid and stabilizer, it has and excellent property of water-retension as well as good compatibility with surfactants, inorganic salts, rubbers and resins. This product has a viscosity of 3,400-5,000 cps. at 25C and is for use in personal care, home care and paint and oilfield products. view less | |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of ap...view more AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less | Request Sample |
| Polycol T-15 | Polygal AG | POLYCOL T-15 is a etherified polysaccaride with medium viscosity, mainly used as a cost effective water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering...view more POLYCOL T-15 is a etherified polysaccaride with medium viscosity, mainly used as a cost effective water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering the stickiness on the trowelling equipment in different kind of building chemical products like gypsum- and cement plasters, renders, fillers and mortars. view less | |
| HDK® T30 | Wacker Chemical Corporation | HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, pr...view more HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. HDK® T30 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. view less | Request Sample |
| CRAYVALLAC® PA4 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for p...view more CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. CRAYVALLAC® PA4 BA 20 is especially suited to coatings demanding a higher degree of surface gloss or transparency. view less | Request Sample |
| HDK® H15 | Wacker Chemical Corporation | HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the ...view more HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the production of technical powders. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. view less | Request Sample |
| HDK® T40 | Wacker Chemical Corporation | HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickenin...view more HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. view less | Request Sample |
| CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...view more CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| HDK® N20 | Wacker Chemical Corporation | HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is app...view more HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. view less | Request Sample |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Polycol T-08 H | Polygal AG | Polycol T-08 H is a highly etherified polysaccaride with low viscosity, mainly used as a water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering the stic...view more Polycol T-08 H is a highly etherified polysaccaride with low viscosity, mainly used as a water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering the stickiness on the trowelling equipment in different kind of building chemical products like gypsum- and cement plasters, renders, fillers and mortars. POLYCOL T-08 H offers superior water retention (open time) at same dosage compared to other POLYCOL products. view less | |
| CRAYVALLAC® PA3 WDA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscos...view more CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling. view less | Request Sample |
| Celopro® ME4M P | Celotech Chemical Co., Ltd. | Celopro® ME4M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement based grouts and repair mortars. | |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and a...view more AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow aid. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less | Request Sample |
| CreaMix TC 1004 | CreaFill Fibers Corp. | CreaMix TC 1004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use o...view more CreaMix TC 1004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 2004 | CreaFill Fibers Corp. | CreaMix TC 2004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use o...view more CreaMix TC 2004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CRAYVALLAC® PA3 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to sol...view more CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. view less | Request Sample |
| CreaMix TC 204 | CreaFill Fibers Corp. | CreaMix TC 204 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the...view more CreaMix TC 204 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less |
