| BENDA-LUTZ® 6042 | Benda-Lutz | BENDA-LUTZ® 6042 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6042 has an average particle size of 13 and a metal content of 6...view more BENDA-LUTZ® 6042 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6042 has an average particle size of 13 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6051 | Benda-Lutz | BENDA-LUTZ® 6051 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6051 has an average particle size of 17 and a metal content of 6...view more BENDA-LUTZ® 6051 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6051 has an average particle size of 17 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6061 | Benda-Lutz | BENDA-LUTZ® 6061 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061 has an average particle size of 13 and a metal content of 6...view more BENDA-LUTZ® 6061 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061 has an average particle size of 13 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6061C | Benda-Lutz | BENDA-LUTZ® 6061C is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061C has an average particle size of 12 and a metal content of...view more BENDA-LUTZ® 6061C is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061C has an average particle size of 12 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6242 | Benda-Lutz | BENDA-LUTZ® 6242 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6242 has an average particle size of 14.5 and a metal content of...view more BENDA-LUTZ® 6242 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6242 has an average particle size of 14.5 and a metal content of 73. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6282 | Benda-Lutz | BENDA-LUTZ® 6282 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6282 has an average particle size of 9 and a metal content of 65...view more BENDA-LUTZ® 6282 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6282 has an average particle size of 9 and a metal content of 65. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| TIB KAT® 616 | TIB Chemicals | TIB KAT® 616 is suitable for various applications in the catalysis of polyurethane systems. Compared to organotin catalysts, this product shows a lower activity offering longer pot life in 2p systems. It is especially useful in curing reactions at elevate...view more TIB KAT® 616 is suitable for various applications in the catalysis of polyurethane systems. Compared to organotin catalysts, this product shows a lower activity offering longer pot life in 2p systems. It is especially useful in curing reactions at elevated temperatures and in curing systems based on aromatic isocyanates. view less | |
| ZOCO 124 | Zochem Inc. | ZOCO 124 is a pelleted version of ZOCO 104 used in applications that require free flow, low dusting and low bulk. This product can be used in glazes. | |
| Durham VX74 | Huntsman Pigments & Additives | Durham VX74 is a stabilised, ready-to-use Cobalt/Barium/Zinc drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier system, based in a de-aromatised hydrocarbon solvent and/or alco...view more Durham VX74 is a stabilised, ready-to-use Cobalt/Barium/Zinc drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier system, based in a de-aromatised hydrocarbon solvent and/or alcohol. This product has been shown to improve the gloss of the coating, improve storage stability, and prevent possible wrinkling or cracking in the final cured system. It has VOC of 319 g/l. view less | |
| White Cloud® 30 LITHOPONE | Sino-American Pigment Systems, Inc. | White Cloud® 30 LITHOPONE, in the form of a white powder, is a zinc sulfide opacifying pigment extender of titanium dioxide. This product can be used in high or medium grades of paints and coatings. It is compatible with all water-based or solvent-borne...view more White Cloud® 30 LITHOPONE, in the form of a white powder, is a zinc sulfide opacifying pigment extender of titanium dioxide. This product can be used in high or medium grades of paints and coatings. It is compatible with all water-based or solvent-borne UV, EB and thermoset systems for paints, coatings, and inks from primers to finish coats. It offers fineness and good dispersibility in a co-crystalline particle with a high light-scattering and refractive index. view less | |
| Dynasylan® SILBOND® HT-33 | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is f...view more Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher SiO2 content. view less | |
| Razeen® SR 5071 | Jubail Chemical Industries Co. | Razeen® SR 5071 is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resist...view more Razeen® SR 5071 is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 has a softening point value of 77 - 82 °C is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primers, marine finishes, floor finishes, and concrete coatings. view less | |
| Micaceous Iron Oxide Gray - AS Type | Hangzhou Epsilon Chemical Co., Ltd. | Micaceous Iron Oxide Gray - AS Type is a gray pigment with over 65% lamellar content, mainly composed of α-Fe2O3. It has good light resistance, heat resistance, weather resistance, and excellent rust resistance. Micaceous iron oxide gray is widely used in...view more Micaceous Iron Oxide Gray - AS Type is a gray pigment with over 65% lamellar content, mainly composed of α-Fe2O3. It has good light resistance, heat resistance, weather resistance, and excellent rust resistance. Micaceous iron oxide gray is widely used in primer, intermediate paint and finish paints of anti-corrosion paints, heavy duty corrosion protection, decorative metal protection, partial replacement of Zinc-Dust, thin film corrosion protection, powder coating, coil coating, anti-corrosion coating applications, and more. view less | |
| Micaceous Iron Oxide Gray - SG Type | Hangzhou Epsilon Chemical Co., Ltd. | Micaceous Iron Oxide Gray - SG Type is a gray pigment with over 65% lamellar content, mainly composed of α-Fe2O3. It has good light resistance, heat resistance, weather resistance, and excellent rust resistance. Micaceous iron oxide gray is widely used in...view more Micaceous Iron Oxide Gray - SG Type is a gray pigment with over 65% lamellar content, mainly composed of α-Fe2O3. It has good light resistance, heat resistance, weather resistance, and excellent rust resistance. Micaceous iron oxide gray is widely used in primer, intermediate paint and finish paints of anti-corrosion paints, heavy duty corrosion protection, decorative metal protection, partial replacement of Zinc-Dust, thin film corrosion protection, powder coating, coil coating, anti-corrosion coating applications, and more. view less | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. view less | |
| SiSiB® PC5420 | SiSiB SILICONES | SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second back...view more SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| Durham VX81 | Huntsman Pigments & Additives | Durham VX81 is a ready-to-use Cobalt/Barium/Zinc/Cerium drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier systems, based in a de-aromatised hydrocarbon solvent and/or alcohol....view more Durham VX81 is a ready-to-use Cobalt/Barium/Zinc/Cerium drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier systems, based in a de-aromatised hydrocarbon solvent and/or alcohol. This product has been shown to improve the gloss of the coating and also improve the storage stability and prevent possibly wrinkling or cracking in the final cured system.. The VOC of this product is 607 g/l. view less | |
| Nuodex Combi QS | Huntsman Pigments & Additives | Nuodex Combi QS is a ready to use combination drier based on Calcium, Zinc and Potassium that has been formulated to function efficiently in a wide range of coating systems and unsaturated polyester resins. It is violet in colour and is a pre-blended comb...view more Nuodex Combi QS is a ready to use combination drier based on Calcium, Zinc and Potassium that has been formulated to function efficiently in a wide range of coating systems and unsaturated polyester resins. It is violet in colour and is a pre-blended combination based in a de-aromatised hydrocarbon solvent. This product has been shown to improve the through drying properties of a coating, improve film hardness, and prevent wrinkling or cracking. The VOC of this product is 500 g/l. view less | |
| SiSiB® PC5410 | SiSiB SILICONES | SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings...view more SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| BECKOSOL® 663-X-50 | Polynt Composites | BECKOSOL® 663-X-50 is a short oil, rosin and phenolic modified, oxidizing alkyd solution available in xylene. It can be used in lift-primers and surfacers for lacquer systems and fast-drying industrial enamels, and can be combined with chlorinated rubber ...view more BECKOSOL® 663-X-50 is a short oil, rosin and phenolic modified, oxidizing alkyd solution available in xylene. It can be used in lift-primers and surfacers for lacquer systems and fast-drying industrial enamels, and can be combined with chlorinated rubber for fast-drying finishes with strong resistance to chemicals. This product exhibits good adhesion, even on hard-to-coat substrates such as zinc die castings, plastics, or fiberglass, and the end product will have hard, tough, corrosion-resistant coatings. view less | |
| HALOX® 700 | ICL Phosphate Specialty | HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-...view more HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-based epoxy and urethane coatings. It is suitable for alkyd and acrylic coatings. It can be used in combination with HALOX® 700. The dosage level of HALOX® 700 is 5-12% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| TAMOL™ 1254 | Univar Solutions | TAMOL™ 1254 is a versatile, low-cost, low-foaming polyacid dispersant providing outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulation...view more TAMOL™ 1254 is a versatile, low-cost, low-foaming polyacid dispersant providing outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulations. In addition to good efficiency, this polyacid dispersant provides excellent stability and color acceptance even in formulations containing zinc oxide. Itt is supplied at 35% solids and is both ammonia and formaldehyde free. It is highly compatible with anionic HASE associative rheology modifiers. view less | Request Sample |
| DISPEX® AA 4144 EB | BASF Formulation Additives | DISPEX® AA 4144 EB is a highly effective pigment dispersing aid for waterborne systems, even at low dosages. As a sole dispersant it does not require any auxiliary dispersant or wetting agent or polyphosphates. DISPEX® AA 4144 EB demonstrates excellent in...view more DISPEX® AA 4144 EB is a highly effective pigment dispersing aid for waterborne systems, even at low dosages. As a sole dispersant it does not require any auxiliary dispersant or wetting agent or polyphosphates. DISPEX® AA 4144 EB demonstrates excellent initial gloss retention and superior gloss retention after heat again. It shows exceptional compatibility with reactive pigments such as zinc oxide and with solvents like ethylene and propylene glycol. This permits the use in glycol based grinds or in pigment slurries. view less | |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a non-functionalized liquid polybutadiene. Due to its high content of 1,4-cis double bonds the apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 110 Bio is a highly reactive binder featuring a high chemical resistance, high wate...view more POLYVEST® eCO 110 Bio is a non-functionalized liquid polybutadiene. Due to its high content of 1,4-cis double bonds the apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 110 Bio is a highly reactive binder featuring a high chemical resistance, high water resistance, high electrical insulation properties, and high cold resistance. It also has good solubility in aliphatic, aromatics and ethers, and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. It can be used in a wide range of applications. view less | Request Sample |
| HEUCORIN® FR | Heubach Ltd | HEUCORIN® FR is a zinc salt of phthalic acid that combines the properties of a high performance organic corrosion and highly effective flash/early rust inhibitor. As an organic corrosion inhibitor designed for flash/early rust inhibition and temporary cor...view more HEUCORIN® FR is a zinc salt of phthalic acid that combines the properties of a high performance organic corrosion and highly effective flash/early rust inhibitor. As an organic corrosion inhibitor designed for flash/early rust inhibition and temporary corrosion protection, HEUCORIN® FR is recommended for the application in waterborne and solventborne Protective Coatings, focussing the formulation on the unique organic-inorganic synergies between HEUCORIN® and HEUCOPHOS® products. This product has a pH value of min. 6.0-max. 8.0, an organic content of typ. 31%, and a conductivity of max. 1000μS/cm. view less | Request Sample |
| Tytan PBT (Titanate Crosslinker) | Borica Co., Ltd. | Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resi...view more Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint containing Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dries, it can stand up to 600 oC. view less | |
| SiSiB® PC5411 | SiSiB SILICONES | SiSiB® PC5411, also called Methyl silicate 51, is a colorless transparent liquid, containing 51% silica (SiO2) by mass. It is a hydrolyzed and oligomerized form of methyl silicate. It can be used as an inorganic binder for refractory fillers and pigments...view more SiSiB® PC5411, also called Methyl silicate 51, is a colorless transparent liquid, containing 51% silica (SiO2) by mass. It is a hydrolyzed and oligomerized form of methyl silicate. It can be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| Razeen® SR 5071 Flake | Jubail Chemical Industries Co. | Razeen® SR 5071 Flake is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion ...view more Razeen® SR 5071 Flake is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 comes in a flake form with a softening point value of 77 - 82 °C and is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primers, marine finishes, floor finishes, and concrete coatings. view less | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. view less | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...view more Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. view less | |
| VANADUR® 2108 | Heubach Ltd | VANADUR® 2108 is a new green shade Bismuth Vanadate Pigment. It is the compelling result of a consequent development work based on the world-wide well established VANADUR® product range. VANADUR® 2108 shows extraordinary high tinting strength and very go...view more VANADUR® 2108 is a new green shade Bismuth Vanadate Pigment. It is the compelling result of a consequent development work based on the world-wide well established VANADUR® product range. VANADUR® 2108 shows extraordinary high tinting strength and very good hiding power combined with high durability, chroma and dispersibility. The high tinting strength opens a new economical dimension for end-users in the formulation of decorative, industrial, powder, coil and automotive coatings. Based on a zinc-free technology, it can significantly contribute to ecological-economic balanced paints. view less | Request Sample |
| SiSiB® PC5423 | SiSiB SILICONES | SiSiB® PC5423 is a transparent liquid containing 32% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is used to deposit silicic acid formed as a result of complete hy...view more SiSiB® PC5423 is a transparent liquid containing 32% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is used to deposit silicic acid formed as a result of complete hydrolysis; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinker component in cold curing silicone rubber systems; as a hardening component in dentistry for impression materials and as binder for embedding material; or as a binder in precision foundry industry. view less | |
| SiSiB® PC5424 | SiSiB SILICONES | SiSiB® PC5424 is a transparent liquid containing 40% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can ...view more SiSiB® PC5424 is a transparent liquid containing 40% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can be used as a binder in zinc-rich (corrosion resistant) coating, as a starting material for sol-gel process, as a crosslinker component in cold curing silicone rubber systems, as a hardening component in dentistry for impression materials and as binder for embedding material, or as a binder in precision foundry industry view less | |
| SiSiB® PC5425 | SiSiB SILICONES | SiSiB® PC5425 is a transparent liquid containing 50% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can ...view more SiSiB® PC5425 is a transparent liquid containing 50% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can be used as a binder in zinc-rich (corrosion resistant) coating, as a starting material for sol-gel process, as a crosslinker component in cold curing silicone rubber systems, as a hardening component in dentistry for impression materials and as binder for embedding material, or as a binder in precision foundry industry view less | |
| SiSiB® PC5430 | SiSiB SILICONES | SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments...view more SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...view more DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. view less | |
| NOVINOX XCA02 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX XCA02 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX XCA02 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate...view more NOVINOX XCA02 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX XCA02 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate in Coil Coatings. Compatible with PU and PE/Melamine systems, NOVINOX XCA02 gives excellent anti-corrosive performance in Coil Coatings applied to HDGS, Galfan, Galvalume and CRS. NOVINOX XCA02 may be used alone or in association with a phosphate based pigment such as Zinc Phosphate PZ20, NOVINOX PAT 15 or NOVINOX ACE20. view less | Request Sample |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. view less | |
| Dynasylan® SILBOND® HT-28A | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other compone...view more Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other components. This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher silica content as compared to a ethyl polysilicate binder. view less | |
| BENDA-LUTZ® 6040 TB/SN | Benda-Lutz | BENDA-LUTZ® 6040 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primaril...view more BENDA-LUTZ® 6040 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6040 TB/SN has an average particle size of 20 and a metal content of 65. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6060 TB/SN | Benda-Lutz | BENDA-LUTZ® 6060 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primaril...view more BENDA-LUTZ® 6060 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6060 TB/SN has an average particle size of 15 and a metal content of 55. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| Octocure ZDIB-50 | Tiarco Chemical | Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...view more Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. view less | |
| Proxel® BZ Plus Preservative | Arxada | Proxel® BZ Plus Preservative is a dual-active, broad spectrum biocide for the wet-state preservation of industrial water-based products. It is an aqueous dispersion of 1, 2- benzisothiazolin- 3-one (BIT) and zinc-2-pyridine-thiol-1-oxide (ZnPt). Proxel® B...view more Proxel® BZ Plus Preservative is a dual-active, broad spectrum biocide for the wet-state preservation of industrial water-based products. It is an aqueous dispersion of 1, 2- benzisothiazolin- 3-one (BIT) and zinc-2-pyridine-thiol-1-oxide (ZnPt). Proxel® BZ Plus Preservative benefits from the use of these two complementary active agents, with differing modes of action making it particularly effective in preserving industrial products against spoilage caused by bacteria, yeasts and mold (fungi). Proxel® BZ Plus Preservative is pH and temperature stable and easily incorporated into a wide range of industrial products. The product is stabilized against transchelation in the presence of transition metals, like iron.Proxel® BZ Plus Preservative is a dual-active, broad spectrum biocide for the wet-state preservation of industrial water-based products. It is an aqueous dispersion of 1, 2- benzisothiazolin- 3-one (BIT) and zinc-2-pyridine-thiol-1-oxide (ZnPt). Proxel® BZ Plus Preservative benefits from the use of these two complementary active agents, with differing modes of action making it particularly effective in preserving industrial products against spoilage caused by bacteria, yeasts and mold (fungi). Proxel® BZ Plus Preservative is pH and temperature stable and easily incorporated into a wide range of industrial products. The product is stabilized against transchelation in the presence of transition metals, like iron. view less | |
| K-SPERSE® 152 | King Industries, Inc. | K-SPERSE® 152 is a wetting and dispersing agent for all types of pigments and has a specific gravity of 1.0 g/ml. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is suggested to be used in all solvent based coatings...view more K-SPERSE® 152 is a wetting and dispersing agent for all types of pigments and has a specific gravity of 1.0 g/ml. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is suggested to be used in all solvent based coatings and inks. This product appears as a clear, dark amber liquid and offer good color & gloss, high pigment loading, transparency, and humidity and corrosion resistance. It is suggested to be used in hard to disperse pigments like polyester, alkyd, acrylic, chlorinated rubber, bituminous, and polyurethane pigments. view less | |
| K-SPERSE® 152MS | King Industries, Inc. | K-SPERSE® 152MS is a wetting and dispersing agent for all types of pigments and has a specific gravity of 0.96 g/ml. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is suggested to be used in all solvent based coati...view more K-SPERSE® 152MS is a wetting and dispersing agent for all types of pigments and has a specific gravity of 0.96 g/ml. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is suggested to be used in all solvent based coatings and inks. This product appears as a clear, dark amber liquid and offer good color & gloss, high pigment loading, transparency, and humidity and corrosion resistance. It is suggested to be used in hard to disperse pigments like polyester, alkyd, acrylic, chlorinated rubber, bituminous, and polyurethane pigments. view less | |
| Bulab® Flamebloc 428 | Buckman Laboratories, Inc. | Bulab® Flamebloc 428 (calcium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. It contains no lead, barium, zinc, or other regulated heavy metals. Since it is borate based, Bulab® Flamebloc...view more Bulab® Flamebloc 428 (calcium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. It contains no lead, barium, zinc, or other regulated heavy metals. Since it is borate based, Bulab® Flamebloc 428 will provide char formation and subsequent smoke suppression. This fine particle size material is easily incorporated into a formulation with maximum dispersibility. Bulab® Flamebloc 428 is recommended for applications with stringent smoke requirements. The product performs best when used as a synergist with halogen-containing compounds. In many applications, Bulab® Flamebloc 428 can be used as a partial replacement for antimony-based compounds. view less | |
| HALOX® XTAIN® L-47 | ICL Phosphate Specialty | HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane disp...view more HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane dispersions (PUD) applied to a variety of wood species for example, redwood, Merbau, and oak. It offers superior performance without the need for Zn2+ cations thus conforming to European ecolabel requirements. HALOX® XTAIN® L-47 provides similar efficiency as its predecessor HALOX® XTAIN® L-44. Recommended dosage level is 1-3% based on total formula weight. view less | Request Sample |
| WorléeAdd 480 N | Worlée-Chemie G.m.b.H. | WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred app...view more WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred application fields are aqueous baking enamels for example on basis polyester, alkyd or acrylate in combination with amino resin or blocked polyisocyanate as well as air and oven drying two component polyurethane systems. W´Add 480 N is incorporated in the lacquer by thoroughly stirring. The optimal addition quantity empirically is 1.0 - 5.0% calculated on total formulation and should be determined by a serial trial. view less | |
| Borchi® Set 134 | Borchers, A Company of OMG | Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action...view more Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action, Borchi® Set 134 is an excellent suspending agent for pigments and fillers. lt is also highly effective when used with heavy pigments and metal powders, offering particular advantages in zinc-rich paints for example. This product is an effective thixotropic agent and thickener for paints based on cold-curing epoxy resins,epoxy resin esters, alkyd resins, chlorinated and cyclised rubber, DD systems, vinyl resin polymers and copolymers. view less | |
| CLAYTONE-MPZ | BYK | CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally su...view more CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. view less | Request Sample |
| HALOX® SZP-395 | ICL Phosphate Specialty | HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety ...view more HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin-film applications (<1 mil or 25 μm). The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| NOVINOX ePAZ | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX ePAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. This product is suitable for a wi...view more NOVINOX ePAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. This product is suitable for a wide range of solvent and water-based resins. NOVINOX ePAZ is also an excellent alternative to chromate in Coil Coatings, SC epoxy and alkyd resin systems. view less | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...view more HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CZ-170 | ICL Phosphate Specialty | HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective repl...view more HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective replacement for zinc oxide. It can also be used in high gloss (+75 gloss units at 60°) and thin film (<1.0 mils or 25 microns) applications, due to its finer mean particle size and narrow particle size distribution. It is suitable for water-based epoxy esters, short-, medium- & long oil alkyd, and solvent-based water-reducible alkyds, alkyd dispersions, and acrylics. HALOX® CZ-170 can be used in specific systems that protect metal and wood substrates. It is also used in powder coatings and wash & etch primers. The dosage level for multi-substrate water-based systems is 2-5% by total formula weight and 0.5-2% for high gloss & thin film coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long o...view more HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. view less | Request Sample |
| Chroma-chem® EDC-20682 | Chromaflo Technologies | Chroma-chem® EDC-20682 is a carbon black pigment dispersion with the color index number PBk7. This product is formulated with epoxy resins, surfactants and other additives to provide such special characteristics as lower viscosity or improved compatibilit...view more Chroma-chem® EDC-20682 is a carbon black pigment dispersion with the color index number PBk7. This product is formulated with epoxy resins, surfactants and other additives to provide such special characteristics as lower viscosity or improved compatibility with difficult to pigment systems. view less | Request Sample |
| Copper Hydropaste B 4555 | Metapol | Copper Hydropaste B 4555, in the form of a particle-sized brilliant flake, is a copper pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, textile coatings, and paper coatings. This product is dispersible in wa...view more Copper Hydropaste B 4555, in the form of a particle-sized brilliant flake, is a copper pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, textile coatings, and paper coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 38-40 um, and it contains between 83-87% metals. view less | |
| TEGO® Foamex 10 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 10 is a defoamer emulsion for waterborne formulations. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming, especially for pigmented high-viscosity formulations. It is an alternative to mineral oil de...view more TEGO® Foamex 10 is a defoamer emulsion for waterborne formulations. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming, especially for pigmented high-viscosity formulations. It is an alternative to mineral oil defoamers, and can be used for paints of medium to high PVC and for stuccos. view less | Request Sample |
| LUBA-print 460/A | Munzing Chemie | LUBA-print 460/A is a white zincstearate wax dispersion additive for paints and printing inks. It is used for water-based systems to improve sand-ability with good hydrophobing character. | |
| TEGO® Foamex 11 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints. | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...view more HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| CV-9341 | NuSil Silicone Technology 1 | CV-9341 is a white silicone grease that can provide high thermal conductivity, high and low temperature stability, and low bleed. It can be applied to the base and mounting studs of transistors and other electrical components as a heat-sink seal. It is al...view more CV-9341 is a white silicone grease that can provide high thermal conductivity, high and low temperature stability, and low bleed. It can be applied to the base and mounting studs of transistors and other electrical components as a heat-sink seal. It is also ideal for applications that require low outgassing under extreme operating conditions. view less | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and ...view more STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance and general industrial paints. view less | |
| STANLUX® Paste 100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance,...view more STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective, or marine coatings. view less | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...view more STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. view less | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...view more STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. view less | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...view more STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. view less | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...view more STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. view less | |
| STANLUX® Paste 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commo...view more STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for industrial paints, and roof coatings. It has an average particle size of 19 microns and a minimum water coverage of 14,000 cm2/g. view less | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...view more STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. view less | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...view more STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. view less | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...view more STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. view less | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...view more STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. view less | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...view more STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. view less | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...view more STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. view less | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...view more STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. view less | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...view more STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. view less | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...view more STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. view less | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...view more STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. view less | |
| STANLUX® Paste 1100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation...view more STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...view more STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. view less | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...view more STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...view more STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is ...view more STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 14 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1290 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power an...view more STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 8 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...view more STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...view more STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...view more STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...view more STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...view more STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...view more STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. view less | |
| STANLUX® Paste 1900 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level...view more STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level and is recommended for systems requiring protective properties. It has an average particle size of 32 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: industrial paints, maintenance, protective and marine coatings. view less | |
| STANLUX® Paste 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level...view more STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level and is recommended for systems requiring differentiated metallic effects, and brighter metallic pigment. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: decorative paints, industrial paints, and trade paints. view less | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...view more STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. view less | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...view more STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. view less |
