| CRYLCOAT® 1671-0 | Allnex | CRYLCOAT® 1671-0 is a carboxylated polyester resin for use in 60/40 hybrid powder coatings. Coatings based on CRYLCOAT® 1671-0 combine good flexibility and flow with high gloss. CRYLCOAT® 1671-0 can be formulated with high levels of filler. | Request Sample |
| PYRAX® B | Vanderbilt Minerals, LLC | PYRAX® B is a hydrated aluminum silicate (pyrophyllite) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functional ...view more PYRAX® B is a hydrated aluminum silicate (pyrophyllite) that is an economical extender pigment. It can be used in both interior and exterior architectural coatings. With a unique combination of particle morphologies, this product is a suitable functional alternate for specialty mica products, including mineralite micas. view less | Request Sample |
| Kamin® 90B | KaMin Solutions | Kamin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important. Kamin® 90B has the physical form of ...view more Kamin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important. Kamin® 90B has the physical form of spray dried beads or slurry. view less | Request Sample |
| Mikhart® 110 | Provencale S.A. | Mikhart® 110, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0-1 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Hubercarb® Q3 Calcium Carbonate | Huber Engineered Materials | Hubercarb® Q3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is commonly used in paint and coating applications as an extender, anti-slip additive or rheology modifier. Hubercarb® Q3 can also improve...view more Hubercarb® Q3 is a high purity, fine particle size calcium carbonate with consistent typical physical properties. It is commonly used in paint and coating applications as an extender, anti-slip additive or rheology modifier. Hubercarb® Q3 can also improve the physical and rheological properties of powder coatings. view less | |
| GL-0715 | Mo-Sci Corporation | GL-0715 consists of solid glass microspheres with light yellow color in powder form. It eliminates the environmental impact and requirements on leaded glass products. It can be used as high temperatures spacer material for gauge control, coating, filler...view more GL-0715 consists of solid glass microspheres with light yellow color in powder form. It eliminates the environmental impact and requirements on leaded glass products. It can be used as high temperatures spacer material for gauge control, coating, filler for plastic, and retro-reflection applications. view less | |
| Kaoflor® 20 A | Minerals Girona S.A. | Kaoflor® 20 A is a hydrosilicate aluminum Koalin filler. It's whiteness and ow abrasivity make it one of the most notable kaolins, suitable for the industries of paints and rubber. It has an oil absorption of 60g/100g and a top cut of 20µm. | |
| Kaoflor® 20 B | Minerals Girona S.A. | Kaoflor® 20 B is a hydrosilicate aluminum Koalin filler. It's whiteness and ow abrasivity make it one of the most notable kaolins, suitable for the industries of paints and rubber. It has an oil absorption DOP of 60g/100g and a top cut of 20µm. | |
| Kaoflor® 30 B | Minerals Girona S.A. | Kaoflor® 30 B is a hydrosilicate aluminum Koalin filler. It's whiteness and ow abrasivity make it one of the most notable kaolins, suitable for the industries of paints and rubber. It has an oil absorption of 58g/100g and a top cut of 30µm. | |
| Vinyl Modified Polysiloxane R-8501 | Zhejiang Feidian Chemical Co., Ltd. | R-8501 is a vinylmethoxyethoxy polysiloxane. It offers good vinyl reactivity, contributes more siloxane reactivity, and reacts well with surface fillers so as to improve compatibility between the filler and polymer. This product is widely applied in zero-...view more R-8501 is a vinylmethoxyethoxy polysiloxane. It offers good vinyl reactivity, contributes more siloxane reactivity, and reacts well with surface fillers so as to improve compatibility between the filler and polymer. This product is widely applied in zero-halogen, flame retardant cable compounds. view less | |
| Tytan CP-318 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-318 is a solid material and can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining t...view more Tytan CP-318 is a solid material and can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. view less | |
| PAT-ADD DA 2250 | Patcham USA | PAT-ADD DA 2250 is a polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2250 contributes to optimization of the fillers, the dispersion process and product s...view more PAT-ADD DA 2250 is a polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2250 contributes to optimization of the fillers, the dispersion process and product stability. view less | Request Sample |
| Epotec® YD 128 X | Aditya Birla | Epotec® YD 128 X is a modified, medium viscosity, bisphenol-A-based epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, elec...view more Epotec® YD 128 X is a modified, medium viscosity, bisphenol-A-based epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, electronic, and flooring applications. view less | |
| Epotec® YD 128 XX | Aditya Birla | Epotec® YD 128 XX is a medium viscosity, bisphenol-A-based modified epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, elec...view more Epotec® YD 128 XX is a medium viscosity, bisphenol-A-based modified epoxy resin which displays good chemical resistance, resistance to crystallization on storage, and pigment and filler wetting properties. This product is ideal for use in electrical, electronic, and flooring applications. view less | |
| Pansil 100 | Tolsa SA | Pansil 100 is a polyfunctional additive, which is supplied as a fine powder manufactured from sepiolite. It can be used as a suspension aid and active filler. It can be used in asphalt sheets, conglomeration in molecular sieves, seed coating, and asphal...view more Pansil 100 is a polyfunctional additive, which is supplied as a fine powder manufactured from sepiolite. It can be used as a suspension aid and active filler. It can be used in asphalt sheets, conglomeration in molecular sieves, seed coating, and asphalt emulsions. view less | |
| AnTec C-60 | Anpeak Specialty Minerals Co., Ltd. | AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extender...view more AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extender in paints and coatings. view less | |
| GL-0237 | Mo-Sci Corporation | GL-0237 consists of solid clear amorphous silica microspheres with white color in powder form. It eliminates the environmental impact and requirements on leaded glass products. It can be used in applications including calibration, high temperatures spacer...view more GL-0237 consists of solid clear amorphous silica microspheres with white color in powder form. It eliminates the environmental impact and requirements on leaded glass products. It can be used in applications including calibration, high temperatures spacer material for gauge control, coating, and filler for plastics. view less | |
| BURGESS NO. 50® | Burgess Pigment Company | BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...view more BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. view less | |
| Dolkron® 01 | Minerals Girona S.A. | Dolkron® 01 is a calcium magnesium carbonate dolomite filler, with great whiteness to be used in the industry of paints, coatings, fertilizers, moulds, ceramic flooring, and agriculture. It has an ignition index of 47'2-%, a moisture content of 0'05%, and...view more Dolkron® 01 is a calcium magnesium carbonate dolomite filler, with great whiteness to be used in the industry of paints, coatings, fertilizers, moulds, ceramic flooring, and agriculture. It has an ignition index of 47'2-%, a moisture content of 0'05%, and an HCI soluble amount of 0'20%. view less | |
| Mikhart® 0.35-0.7 | Provencale S.A. | Mikhart® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between .25 and .9 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 0.5-1 | Provencale S.A. | Mikhart® 0.5-1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.7-1.2 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 0.5-1.5 | Provencale S.A. | Mikhart® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.63-1.8 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 1-2 | Provencale S.A. | Mikhart® 1-2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 1.4-2.5 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Huberbrite® 1 Barium Sulfate | Huber Engineered Materials | Huberbrite® 1 is a high brightness, 1 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases spec...view more Huberbrite® 1 is a high brightness, 1 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. view less | |
| Huberbrite® 3 Barium Sulfate | Huber Engineered Materials | Huberbrite® 3 is a high brightness, 3 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases spe...view more Huberbrite® 3 is a high brightness, 3 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. view less | |
| JEFFAMINE® SD-231 POLYETHERDIAMINE | Huntsman Performance Products | JEFFAMINE® SD-231 Polyetheramine - Useful in coatings and polymer applications. It is a liquid difunctional amine, with each amine being secondary. Applications include being a chain extender for polyureas and polyurethanes with the benefits of low color ...view more JEFFAMINE® SD-231 Polyetheramine - Useful in coatings and polymer applications. It is a liquid difunctional amine, with each amine being secondary. Applications include being a chain extender for polyureas and polyurethanes with the benefits of low color and viscosity as well as slower reacting times than primary amines. view less | |
| IMSIL® A-75 | Sibelco | IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weatherin...view more IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 11.3 microns. view less | |
| IMSIL® A-45 | Sibelco | IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.7 microns. view less | |
| IMSIL® A-30 | Sibelco | IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 8.1 microns. view less | |
| IMSIL® A-25 | Sibelco | IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 5.0 microns. view less | |
| IMSIL® A-8 | Sibelco | IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering...view more IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 2.1 microns. view less | |
| GL-1619 | Mo-Sci Corporation | GL-1619 consists of borosilicate glass microspheres with a metallic cerium oxide coating that appears to be white or pink in color. It eliminates the environmental impact and requirements on leaded glass products. It can be used in applications including ...view more GL-1619 consists of borosilicate glass microspheres with a metallic cerium oxide coating that appears to be white or pink in color. It eliminates the environmental impact and requirements on leaded glass products. It can be used in applications including conductive filler for plastic and pigment. view less | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...view more Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). view less | |
| Rovene® 4541 | Mallard Creek Polymers, Inc. | Rovene® 4541 is a carboxylated styrene-butadiene emulsion that has an outstanding strength and pigment binding properties. Rovene® 4541 provides good a good balance of dry & wet strength, capacity to accept high filler loading, block resistance, and adhes...view more Rovene® 4541 is a carboxylated styrene-butadiene emulsion that has an outstanding strength and pigment binding properties. Rovene® 4541 provides good a good balance of dry & wet strength, capacity to accept high filler loading, block resistance, and adhesion to multiple substrates including wood and metal. view less | |
| Acryloyloxy Modified Polysiloxane R-8303 | Zhejiang Feidian Chemical Co., Ltd. | R-8303 is an acryloyl modified polysiloxane. Its longer Si-O chain length provide better wetting result, while maintaining good acryloxy reaction activity. Thus filler dispersion and coupling effect should be further enhanced. This product can be used for...view more R-8303 is an acryloyl modified polysiloxane. Its longer Si-O chain length provide better wetting result, while maintaining good acryloxy reaction activity. Thus filler dispersion and coupling effect should be further enhanced. This product can be used for artificial marble and artificial quartz stone. view less | |
| D.E.R.™ 324 | Univar Solutions | D.E.R.™ 324 offers low viscosity and low surface tension to wet the surface better, giving better adhesion and slightly lower viscosity at any given filler loading. The diluent increases pot life, flexibility (impact resistance) and acid resistance, but l...view more D.E.R.™ 324 offers low viscosity and low surface tension to wet the surface better, giving better adhesion and slightly lower viscosity at any given filler loading. The diluent increases pot life, flexibility (impact resistance) and acid resistance, but limits the solvent resistance. Prone to crystallization. view less | Request Sample |
| Rexin 160 | S.A.P.I.C.I. SpA | Rexin 160 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane ...view more Rexin 160 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane coatings. view less | |
| Rexin 1543 | S.A.P.I.C.I. SpA | Rexin 1543 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane...view more Rexin 1543 is a short-oil alkyd resin. This product dries quickly with good solvent release and high wetting properties. It can be used in pigmented polyurethane sealers containing a lot of filler. It can also be used in clear or pigmented polyurethane coatings. view less | |
| SUPERSPERSE® DRY | Eagle Specialty Products | SUPERSPERSE® DRY is a water-soluble, desiccated, multifunctinoal dispersant and wetting agent in a dry powder form. This product is most commonly used to improve the wetting of the solid dry particles in wet paint, ink, caulk, mortar, joint filler, and pl...view more SUPERSPERSE® DRY is a water-soluble, desiccated, multifunctinoal dispersant and wetting agent in a dry powder form. This product is most commonly used to improve the wetting of the solid dry particles in wet paint, ink, caulk, mortar, joint filler, and plaster manufacturing applications. view less | |
| LithoFill MM | LITHOS Industrial Minerals GmbH | LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...view more LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. view less | |
| LithoFill BM | LITHOS Industrial Minerals GmbH | LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...view more LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. view less | |
| LithoFill 100 | LITHOS Industrial Minerals GmbH | LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, an...view more LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. view less | |
| Calcined Kaolin for Paint | Golden Bright Enterprise Co. Ltd. | Calcined Kaolin for Paint has high brightness and better opacity properties compared with other similar products. It has excellent dispersion and low oil absorption, and can increase the amount of filler in the paint. This product can improve the paint's ...view more Calcined Kaolin for Paint has high brightness and better opacity properties compared with other similar products. It has excellent dispersion and low oil absorption, and can increase the amount of filler in the paint. This product can improve the paint's scrub resistance, abrasion resistance, and weather resistance. view less | |
| Magnum Fill™ SDL | Mississippi Lime Company | Magnum Fill™ SDL is a light density, high brightness precipitated calcium carbonate with high oil absorption. It comes in the form of a dry powder and has a median particle size of 1.25 microns. Magnum Fill™ SDL is designed for use as a functional filler ...view more Magnum Fill™ SDL is a light density, high brightness precipitated calcium carbonate with high oil absorption. It comes in the form of a dry powder and has a median particle size of 1.25 microns. Magnum Fill™ SDL is designed for use as a functional filler for coatings applications. view less | |
| Submicron Alumina PA 751 | Panadyne | PA 751 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can be used in coati...view more PA 751 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can be used in coatings, polishing, and filler applications. view less | |
| CALGAR® 40 | Provencale S.A. | CALGAR® 40, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 12 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. | |
| CALGAR® 130 | Provencale S.A. | CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2....view more CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. view less | |
| CALGAR® 80-800 | Provencale S.A. | CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is ...view more CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. view less | |
| CALGAR® 0.5-1.5 | Provencale S.A. | CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is...view more CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. view less | |
| CALGAR® 1.5-3 | Provencale S.A. | CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2...view more CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. view less | |
| Blanc Fixe | BassTech International | Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consi...view more Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consistency, depending on the application and grade. view less | |
| DARVAN® 670L | Vanderbilt Minerals, LLC | DARVAN® 670L is a liquid anionic dispersing agent for the preparation of aqueous dispersions of colored pigments, dyes, extender pigments, etc. that are used in the manufacture of water-borne paints and coatings. This product is effective for viscosity re...view more DARVAN® 670L is a liquid anionic dispersing agent for the preparation of aqueous dispersions of colored pigments, dyes, extender pigments, etc. that are used in the manufacture of water-borne paints and coatings. This product is effective for viscosity reduction of high solids dispersions of red iron oxide and similar pigments. view less | Request Sample |
| Promisil SM | Industrias Promi de Occidente, S.A. de C.V | Promisil SM is a highly dispersed precipitated silica and higher density. It is used as reinforcing filler in the rubber industry and other compounds as anticaking powder. Applications include use in agriculture, coatings, footwear, fungicide, insecticide...view more Promisil SM is a highly dispersed precipitated silica and higher density. It is used as reinforcing filler in the rubber industry and other compounds as anticaking powder. Applications include use in agriculture, coatings, footwear, fungicide, insecticide, processing aid, paint, pesticide, plastics, PVC, sheet, reinforcement, salt and silicon rubber. view less | |
| Vinyl Modified Polysiloxane R-8502 | Zhejiang Feidian Chemical Co., Ltd. | R-8502 is a vinyl modified polysiloxane. It offers good vinyl reactivity, contributes more siloxane reactivity, and reacts well with surface fillers so as to improve compatibility between the filler and polymer. This product can be used in cross-linked po...view more R-8502 is a vinyl modified polysiloxane. It offers good vinyl reactivity, contributes more siloxane reactivity, and reacts well with surface fillers so as to improve compatibility between the filler and polymer. This product can be used in cross-linked polyethylene products and for emulsion modification. view less | |
| KBP-90-40 | Shin-Etsu Silicones of America | KBP-90-40 is a high solids content primary aminoalkyl silane oligomer in aqueous solution. It is ready to use, and also depolymerizes to mostly monomer upon dilution of water. This product can be used as an additive for adhesives, sealants, coatings, fibe...view more KBP-90-40 is a high solids content primary aminoalkyl silane oligomer in aqueous solution. It is ready to use, and also depolymerizes to mostly monomer upon dilution of water. This product can be used as an additive for adhesives, sealants, coatings, fiberglass, filler treatments, and more. view less | |
| SiSiB® PC5931 | SiSiB SILICONES | SiSiB® PC5931 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyole...view more SiSiB® PC5931 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyolefin production with Zeigler-Natta catalysts. view less | |
| SiSiB® PC5932 | SiSiB SILICONES | SiSiB® PC5932 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyole...view more SiSiB® PC5932 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyolefin production with Zeigler-Natta catalysts. view less | |
| Hanwha EVA 1815 | Hanwha Chemical Corporation | Hanwha EVA 1815, ethylene vinyl acetate, is manufactured by high pressure autoclave process and designed for base resin of variety of wire & cable compounds such as semi-conductive compound, flame retardant compound. EVA 1815 is well known for its excelle...view more Hanwha EVA 1815, ethylene vinyl acetate, is manufactured by high pressure autoclave process and designed for base resin of variety of wire & cable compounds such as semi-conductive compound, flame retardant compound. EVA 1815 is well known for its excellent processability, filler loadability and high quality assurance. view less | |
| Hanwha EVA 1834 | Hanwha Chemical Corporation | Hanwha EVA 1834 is a resin manufactured by a high pressure autoclave process. It is designed for base resin of variety of wire and cable compounds such as semi-conductive compound, etc. EVA 1834 is well known for its excellent processability, filler loada...view more Hanwha EVA 1834 is a resin manufactured by a high pressure autoclave process. It is designed for base resin of variety of wire and cable compounds such as semi-conductive compound, etc. EVA 1834 is well known for its excellent processability, filler loadability and high quality assurance. view less | |
| Luna-mer 1174 | DKSH | Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is avai...view more Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is available in Europe, Asia and North America. view less | Request Sample |
| Calcined Kaolin for Paint 901 | Golden Bright Enterprise Co. Ltd. | Calcined Kaolin for Paint 901 has higher brightness and better opacity properties compared with other similar products. It has excellent dispersion and low oil absorption, and can increase the amount of filler in the paint. This product can improve the pa...view more Calcined Kaolin for Paint 901 has higher brightness and better opacity properties compared with other similar products. It has excellent dispersion and low oil absorption, and can increase the amount of filler in the paint. This product can improve the paint's scrub resistance, abrasion resistance, and weather resistance. view less | |
| AnTec C-98 | Anpeak Specialty Minerals Co., Ltd. | AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a functional pigment extender...view more AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a functional pigment extender in coatings, paints, and printing inks. view less | |
| AnTec WE | Anpeak Specialty Minerals Co., Ltd. | AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. ...view more AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. It contains less than 0.5% free moisture at 105 degrees Celsius. view less | |
| Kamin® 90 | KaMin Solutions | Kamin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important. K...view more Kamin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important. Kamin® 90 comes in the form of a white, milled fine powder. view less | Request Sample |
| Submicron Alumina PA 752 | Panadyne | Submicron Alumina PA 752 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can ...view more Submicron Alumina PA 752 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can be used in coatings, polishing, and filler applications. view less | |
| Submicron Alumina PA 753 | Panadyne | Submicron Alumina PA 753 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can ...view more Submicron Alumina PA 753 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can be used in coatings, polishing, and filler applications. view less | |
| Submicron Alumina PA 890 | Panadyne | Submicron Alumina PA 890 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can ...view more Submicron Alumina PA 890 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can be used in coatings, polishing, and filler applications. view less | |
| Submicron Alumina PA 891 | Panadyne | Submicron Alumina PA 891 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can ...view more Submicron Alumina PA 891 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can be used in coatings, polishing, and filler applications. view less | |
| Submicron Alumina PA 892 | Panadyne | Submicron Alumina PA 892 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can ...view more Submicron Alumina PA 892 is an aluminum oxide powder that has been milled so that its particle size is below 1 micron in size. This product has high hardness, compression strength, abrasion resistance, chemical inertness, and a high melting point. It can be used in coatings, polishing, and filler applications. view less | |
| CALGAR® 0.35-0.7 | Provencale S.A. | CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity ...view more CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. view less | |
| KBE-585 | Shin-Etsu Silicones of America | KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significa...view more KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBE-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBE-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less | |
| KBM-602 | Shin-Etsu Silicones of America | KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics...view more KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics, epoxies, phenolics, melamines, polyurethanes, polycarbonates, polyesters, nylons, polystyrenes, PVC, PET, PBT, ABS, and silicones. KBM-602 is most often used to improve strength, flexibility, and adhesion due to its ability to create exceptionally strong interactions between inorganic and organic components of a given system. Additional advantages may include improved processing (improvements in viscosity and other flow characteristics, improved compatibility of composite components and reduced energy consumption, better filler dispersion, the ability to increase the ratio of filler to resin, and improved resistance to chemicals and moisture. view less | |
| WhiteLite™ WL-32 | Glassfillers.com (A unit of Vitrominerals Inc.) | WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight th...view more WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-32 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-32 has a bulk density of 50 lb/ft3, oil absorption of 22, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 4, and a brightness of 90 to 91 photovolt Y value. view less | |
| WL-42 | Glassfillers.com (A unit of Vitrominerals Inc.) | WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight t...view more WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-42 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-42 has a bulk density of 40 lb/ft3, oil absorption of 25, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 2, and a brightness of 90 to 91 photovolt Y value. view less | |
| CreaMix TC 204 | CreaFill Fibers Corp. | CreaMix TC 204 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the...view more CreaMix TC 204 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 207 | CreaFill Fibers Corp. | CreaMix TC 207 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the...view more CreaMix TC 207 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 504 | CreaFill Fibers Corp. | CreaMix TC 504 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the...view more CreaMix TC 504 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 507 | CreaFill Fibers Corp. | CreaMix TC 507 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the...view more CreaMix TC 507 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 1004 | CreaFill Fibers Corp. | CreaMix TC 1004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use o...view more CreaMix TC 1004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 1004/5 | CreaFill Fibers Corp. | CreaMix TC 1004/5 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce ...view more CreaMix TC 1004/5 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 2004 | CreaFill Fibers Corp. | CreaMix TC 2004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use o...view more CreaMix TC 2004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| Hanos TW01 | Hanwha Chemical Corporation | Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...view more Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. view less | |
| Hanos SW01 | Hanwha Chemical Corporation | Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...view more Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. view less | |
| White Cloud® SYIC-c | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...view more White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. view less | |
| White Cloud® SYIC-h | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...view more White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. view less | |
| Rovene® 6018 | Mallard Creek Polymers, Inc. | Rovene® 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives. It provides excellent wet and dry adhesion to inorganic surfaces such as glass and cera...view more Rovene® 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives. It provides excellent wet and dry adhesion to inorganic surfaces such as glass and ceramics along with outstanding filler loading capacity for economical mastic adhesive formulations. view less | |
| CRYLCOAT® 2839-0 | Allnex | CRYLCOAT® 2839-0 is a hydroxyl functional polyester resin for use with blocked poly-isocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2839-0 exhibit good mechanical, chemical and weathering resistance, good flow, g...view more CRYLCOAT® 2839-0 is a hydroxyl functional polyester resin for use with blocked poly-isocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2839-0 exhibit good mechanical, chemical and weathering resistance, good flow, good pigment and filler wetting and excellentappearance in clear powder coatings. view less | Request Sample |
| GENOMER* 6058 | Rahn USA Corp. | GENOMER* 6058 is an organic filler. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 6058 and its dilutions can be used as thixotropy modifiers. This product is recommended for use in the following applications: offset inks and v...view more GENOMER* 6058 is an organic filler. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 6058 and its dilutions can be used as thixotropy modifiers. This product is recommended for use in the following applications: offset inks and varnishes; wood coatings; screen inks; and plastic coatings. view less | Request Sample |
| Epotec® YD 522 | Aditya Birla | Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applicati...view more Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applications, high solids & solvent-free coatings, and adhesives. view less | |
| Hanwha EVA 2815 | Hanwha Chemical Corporation | Hanwha EVA 2815 is a resin manufactured by a high pressure Tubular process. It is designed for base resin of variety of wire and cable compounds such as semi-conductive compound, flame retardant compound. EVA 2815 is well known for its excellent processab...view more Hanwha EVA 2815 is a resin manufactured by a high pressure Tubular process. It is designed for base resin of variety of wire and cable compounds such as semi-conductive compound, flame retardant compound. EVA 2815 is well known for its excellent processability, filler loadability and high quality assurance. view less | |
| VOLCLAY® Premium Gel | American Colloid Company | VOLCLAY® Premium Gel is a general purpose filler for use when mild thixotropic properties are desirable. This product is a 200 mesh rheology enhancer, and it is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial product...view more VOLCLAY® Premium Gel is a general purpose filler for use when mild thixotropic properties are desirable. This product is a 200 mesh rheology enhancer, and it is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial products where a dry 200 mesh particle size and medium viscosity is required. view less | |
| Susterra® Propanediol | Univar Solutions | Susterra® Propanediol is the building block that delivers high performance across a wide variety of polyurethane applications. It is an excellent bio-based polyol or chain extender for manufacturing polyurethane dispersants. Based on the chemistry selecte...view more Susterra® Propanediol is the building block that delivers high performance across a wide variety of polyurethane applications. It is an excellent bio-based polyol or chain extender for manufacturing polyurethane dispersants. Based on the chemistry selected, the structural block of the final polyurethane can result in enhanced and benficial mechanical properties for the finished product. view less | Request Sample |
| Magnum Fill™ HO97 | Mississippi Lime Company | Magnum Fill™ HO97 is a high brightness precipitated calcium carbonate designed as a functional filler for both the coatings and paper markets. This product comes in the form of a dry powder and has a median particle size of 1.6 microns. The crystal morpho...view more Magnum Fill™ HO97 is a high brightness precipitated calcium carbonate designed as a functional filler for both the coatings and paper markets. This product comes in the form of a dry powder and has a median particle size of 1.6 microns. The crystal morphology of Magnum Fill™ HO97 is intended to maximize opacity. view less | |
| Hanos PS Ink | Hanwha Chemical Corporation | Hanos PS Ink is a PP pellet coating ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applicati...view more Hanos PS Ink is a PP pellet coating ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. view less | |
| MPD (3-METHYL-1,5-PENTANEDIOL) | Kuraray America, Inc. | MPD (3-Methyl-1,5-pentanediol) is a low viscosity liquid with an unique molecular structure. It offers significant advantages in a vast range of application such as; Low viscosity and easy handling, Low migration, Good adhesion, high elongation. MPD is used for; Polyester Polyol, Polycarbonate Polyol, Plasticizer, Chain extender...view more MPD (3-Methyl-1,5-pentanediol) is a low viscosity liquid with an unique molecular structure. It offers significant advantages in a vast range of application such as; Low viscosity and easy handling, Low migration, Good adhesion, high elongation. MPD is used for; Polyester Polyol, Polycarbonate Polyol, Plasticizer, Chain extender for Polyurethane resin, Diacrylate and Dimethacrylate. view less | |
| VANSIL® HR-2000 | Vanderbilt Minerals, LLC | VANSIL® HR-2000 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance ...view more VANSIL® HR-2000 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. view less | Request Sample |
| PAT-ADD DA 2709 | Patcham USA | PAT-ADD DA 2709 is a Green chemistry based wetting and dispersing additive for highly filler loaded UP resins systems. PAT-ADD DA 2709 reduces the viscosity of polyester casting resin systems and improves the flow behavior and the leveling of the resin mi...view more PAT-ADD DA 2709 is a Green chemistry based wetting and dispersing additive for highly filler loaded UP resins systems. PAT-ADD DA 2709 reduces the viscosity of polyester casting resin systems and improves the flow behavior and the leveling of the resin mixture, without affecting the curing or the color. view less | Request Sample |
| VANSIL® HR-1500 | Vanderbilt Minerals, LLC | VANSIL® HR-1500 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance...view more VANSIL® HR-1500 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. view less | Request Sample |
| Razeen® SR 5174 | Jubail Chemical Industries Co. | Razeen® SR 5174 is a solid epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Razeen® SR 5174 is designed for use in th...view more Razeen® SR 5174 is a solid epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Razeen® SR 5174 is designed for use in the formulation of general industrial coatings and decorative coatings for metal furniture. view less | |
| Hanwha EVA 1826 | Hanwha Chemical Corporation | Hanwha EVA 1826 is a resin manufactured by high pressure autoclave process. It is designed for base resin of a variety of wire and cable compounds such as semi-conductive compound and flame retardant compound. EVA 1826 is well known for its excellent proc...view more Hanwha EVA 1826 is a resin manufactured by high pressure autoclave process. It is designed for base resin of a variety of wire and cable compounds such as semi-conductive compound and flame retardant compound. EVA 1826 is well known for its excellent processability, filler loadability and high quality assurance. view less |
