| Sodium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Sodium Stearate is a white powder that has a sodium content of 7.5%. This product is often used in paints, coatings and inks. | |
| Sodium Hypochlorite | Occidental Chemical Corp. (OxyChem) | Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textil...view more Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textiles, water purification, medicine, fungicides, swimming pool disinfectants, and germicides. view less | |
| Sodium Hypophosphite | Hainan Zhongxin Chemical Co., Ltd. | Sodium Hypophosphite is a white crystalline powder with the molecular formula NaH2PO2.H2O. It is used as a chemical plating agent in the surface metalization of objects that could not be done through electroplating or parts that have high precision requir...view more Sodium Hypophosphite is a white crystalline powder with the molecular formula NaH2PO2.H2O. It is used as a chemical plating agent in the surface metalization of objects that could not be done through electroplating or parts that have high precision requirements on properties. view less | |
| Sodium Bichromate | Qingdao Sun Chemical Corporation Limited | Sodium Bichromate is mainly used in the manufacture of Chromic acid, Chrome pigment and other chromic salts. It is also used in the industries of tanning leather, textile, electroplating, medicine, oil and fat, petroleum, dye and drilling, etc. This produ...view more Sodium Bichromate is mainly used in the manufacture of Chromic acid, Chrome pigment and other chromic salts. It is also used in the industries of tanning leather, textile, electroplating, medicine, oil and fat, petroleum, dye and drilling, etc. This product is a bright orange, needle or small-granular crystal. It deliquesces easily in air, dissolves very easily in water and becomes an acidic and orange solution. In acid mediums, Sodium Bichromate is a strong oxidant. view less | |
| Sodium Omadine® Fungicide | Arxada | Sodium Omadine® Fungicide is a highly active, broad-spectrum antimicrobial agent that, when used at recommended concentrations, can help to prevent and minimize problems associated with dry film fungal and algal growth. | |
| Sodium Ethyl Xanthate | Hainan Zhongxin Chemical Co., Ltd. | Sodium Ethyl Xanthate is an organosulfur compound with the chemical formula CH3CH2OCS2Na and is a pale yellow powder that is 90% pure. It is primarily used in the mining industry as a flotation agent for the recovery metals. Sodium Ethyl Xanthate has othe...view more Sodium Ethyl Xanthate is an organosulfur compound with the chemical formula CH3CH2OCS2Na and is a pale yellow powder that is 90% pure. It is primarily used in the mining industry as a flotation agent for the recovery metals. Sodium Ethyl Xanthate has other applications as an additive to paints and rubber to protect it against oxidation. view less | |
| Sodium Lauryl Sulfate | Qingdao Sun Chemical Corporation Limited | Sodium Lauryl Sulfate is a traditional component of cost-effective surfactant systems due to it is excellent foam and viscosity response characteristics. It is ideally used in clear or pearlescent shampoos, cleansers, bath and shower products. It has a so...view more Sodium Lauryl Sulfate is a traditional component of cost-effective surfactant systems due to it is excellent foam and viscosity response characteristics. It is ideally used in clear or pearlescent shampoos, cleansers, bath and shower products. It has a sodium chloride content of 0.3% max., an unsulfated alcohol content of 0.5% max., and a pH level (10% solution) of 6.5-7.5. view less | |
| Sodium Methallyl Sulfonate (SMAS) | Kowa American Corporation | Sodium Methallyl Sulfonate (SMAS) is a white flake-like powder. | Request Sample |
| Sodium Allyl Sulfonate 35% | McGean-Rohco, Inc. | Sodium Allyl Sulfonate 35% is used as a brightener for nickel electroplating, as a dyesite monomer in acrylic fiber, and as a performance monomer in synthetic polymer applications. | |
| Sodium Omadine® 2000 Antimicrobial | Arxada | Sodium Omadine® 2000 Antimicrobial is an effective preservative in most aqueous compositions. The concentration required to give protection depends on several factors including the susceptibility of the system to microbiological degradation, the extent to...view more Sodium Omadine® 2000 Antimicrobial is an effective preservative in most aqueous compositions. The concentration required to give protection depends on several factors including the susceptibility of the system to microbiological degradation, the extent to which microorganisms can gain access, the species involved, pH, temperature, and length of time for which protection is required. view less | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...view more Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. view less | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...view more Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...view more Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. view less | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...view more Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...view more Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...view more Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...view more Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. view less | |
| Purox® S Grains Sodium Benzoate | LANXESS (former Emerald Performance Materials) | Purox® S is a sodium benzoate that effectively inhibits corrosion and ash rust in waterborne systems at low concentrations. It may also reduce fouling by reducing the tendency of rust and scale to dislodge from corroded surfaces and does not cause foamin...view more Purox® S is a sodium benzoate that effectively inhibits corrosion and ash rust in waterborne systems at low concentrations. It may also reduce fouling by reducing the tendency of rust and scale to dislodge from corroded surfaces and does not cause foaming in these applications. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less | |
| Sodium Dichloroisocyanurate （SDIC OR DCCNA） | Qingdao Sun Chemical Corporation Limited | Sodium Dichloroisocyanurate （SDIC OR DCCNA）is a disfectant that can be used in hygiene and disease control, medical treatment, livestock farming, aquiculture and plant protection, etc, such as disinfect drink water, industrial water, dishware, swimming po...view more Sodium Dichloroisocyanurate （SDIC OR DCCNA）is a disfectant that can be used in hygiene and disease control, medical treatment, livestock farming, aquiculture and plant protection, etc, such as disinfect drink water, industrial water, dishware, swimming pools, livestock, poultry, fishes and environment disinfection as well as regular and preventative contagion disinfection. This product has a molecular weight of 219.95, a solubility (25°C) of 25g/100g water, and a pH value of 5.5-7.0. view less | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...view more Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...view more Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...view more Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. view less | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...view more Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. view less | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...view more Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...view more Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...view more Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...view more Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...view more Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. view less | |
| Sodium Carboxymethyl Cellulose (CMC) Paint Grade | Unionchem | Sodium Carboxymethyl Cellulose Paint Grade function as high performance rheology modifier, thickener, suspending agent, cling improver, and moisture retention agent in water based paints and coatings. It is rapidly dispersible, resistant to bacteria attac...view more Sodium Carboxymethyl Cellulose Paint Grade function as high performance rheology modifier, thickener, suspending agent, cling improver, and moisture retention agent in water based paints and coatings. It is rapidly dispersible, resistant to bacteria attack, consistent and stable in temperature variation. This product is a high viscosity thickener, and it offers smooth rheology control, efficient suspension ability, and and pigment suspension for evenly mixed and maintained uniform liquid, extended shelf life, and improved cling and smooth flow. view less | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...view more Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. view less | |
| DISPEX® AA 4135 NA | BASF Formulation Additives | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| TARGON® CP Granules | ICL Phosphate Specialty | TARGON® CP Granules is an additive for gypsum plaster and plaster boards. It is a cyclic sodium trimetaphosphate. | Request Sample |
| DISPEX® AA 4935 | BASF Formulation Additives | DISPEX® AA 4935 is a polymeric dispersing agent based on acrylic acid sodium salt in powder form. | |
| DRESINATE TX | Univar Solutions | DRESINATE TX is a tall oil soap is a free flowing solid, fully saponified sodium soap of tall oil. . | Request Sample |
| SIPERNAT® 833 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 833 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SIPERNAT® 898 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 898 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| DARVAN® 7-N | Vanderbilt Minerals, LLC | DARVAN 7-N is a low foaming sodium polymethacrylate dispersing agent that is highly effective in dispersing minerals in water based systems. | Request Sample |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...view more Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. view less | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...view more Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. view less | |
| BSI® 189 | Buckman Laboratories, Inc. | BSI® 189 is a highly effective sodium polyacrylate dispersant for use in water-based coatings, tint pastes, adhesives, caulks, grouts, and sealants. It has been shown to minimize flocculation and has less of an adverse effect on in-can corrosion versus ot...view more BSI® 189 is a highly effective sodium polyacrylate dispersant for use in water-based coatings, tint pastes, adhesives, caulks, grouts, and sealants. It has been shown to minimize flocculation and has less of an adverse effect on in-can corrosion versus other sodium polyacrylates. This product is a 40% active greener alternative dispersing agent for water-based systems, and is zero VOC, low odor, and approved under FDA (21 CFR) 176.170. view less | |
| NATIONAL® STANDARD | Bentonite Performance Minerals | NATIONAL® STANDARD is a natural 200 mesh high purity Wyoming sodium bentonite. This product is used as a binder and rheological modifier in asphalt emulsion coatings. | |
| SIPERNAT® 800 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 800 is a precipitated synthetic sodium aluminosilicate that is manufactured in the USA. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SIPERNAT® 820 A | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 820 A is a sodium aluminium silicate. It is produced by a special precipitation and drying process and is employed as a partial replacement for titanium dioxide. | Request Sample |
| Z-CEL® 8054 | Potters Industries Inc. | Z-CEL® 8054 is a white-colored, synthetic, sodium aluminosilicate microsphere. This product is most commonly used as a filler in paint, coating, and film production applications. | |
| Calfax® DB-45 | Pilot Chemical | Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sod...view more Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sodium carbonate and sodium metasilicate. The high surface activity and the high electrolyte tolerance of Calfax® DB-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification process under conditions that would not be usable with conventional surface active agents, permitting greater control over latex’s molecular weight and particle size. Calfax® DB-45 also aids in improving a latex emulsion’s thermal and mechanical stability. view less | |
| Paracryl® PC-8445 | Royal Coatings & Specialty Polymers (Para-Chem) | Paracryl® PC-8445 is sodium stabilized, high molecular weight, non-film forming polymer. This product is used as a let down vehicle for paper and board ink applications. | |
| DARVAN® 7-NS | Vanderbilt Minerals, LLC | DARVAN 7-NS is the powder form of DARVAN 7-N, a low-foaming sodium polymethacrylate dispersing agent. This product is a very effective dispersant for pigments in aqueous systems. | Request Sample |
| TARGON® 43 | ICL Phosphate Specialty | TARGON® 43 is a setting retarder for premixed flooring screed and retarder component for gypsum plaster. It is a sodium polyphosphate (high molecular) that appears as a white very fine agglomerate. | Request Sample |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Kemsurf ESD | P.A.T. Products | Kemsurf ESD is Sodium Lauryl Ether (3 EO) Sulphate. It finds application where foaming, wetting and detergency are required. Good stability in the presence of high electrolyte and hard water environments. | Request Sample |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...view more Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. view less | |
| Coattun S.PR.C150 | Kaltun Mining Co. | Coattun S.PR.C150 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has a hardness of 6mohs and a density of 2.6g/cm3. | |
| Coattun S.PR.C300 | Kaltun Mining Co. | Coattun S.PR.C300 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has a hardness of 6mohs and a density of 2.60g/cm3. | |
| NATIONAL® STANDARD AE325 | Bentonite Performance Minerals | NATIONAL® STANDARD AE325 is an engineered Wyoming sodium bentonite modified with polymers for stabilizing, thickening, emulsifying and improving viscosity in the water and oil phase for the manufacturing of asphalt emulsion coatings. | |
| NATIONAL® STANDARD AE200 | Bentonite Performance Minerals | NATIONAL® STANDARD AE200 is an engineered Wyoming sodium bentonite modified with polymers for stabilizing, thickening, emulsifying and improving viscosity in the water and oil phase for the manufacturing of asphalt emulsion coatings. | |
| Fabutit 734 | BassTech International | Fabutit 734 is a modified STPP (Sodium Tripolyphosphate) which acts as a deflocculant in paint, coatings, and inks. This product is three times more effective than standard STPP and is water soluble. | |
| Dextrol™ OC-45N | Ashland | Dextrol™ OC-45N is sodium salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Sideline Products Ultramarine Blue 462 | Hunan Three-Ring Pigments Co., Ltd. | Sideline Products Ultramarine Blue 462 is a sodium-aluminum pigment. This product appears as blue crystalline grains. It can be used as a colorant or whitening agent in coatings, paper-making and plastic. | |
| Coattun S.PR.C3 | Kaltun Mining Co. | Coattun S.PR.C3 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 37g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C5 | Kaltun Mining Co. | Coattun S.PR.C5 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 31g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C25 | Kaltun Mining Co. | Coattun S.PR.C25 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 27g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C30 | Kaltun Mining Co. | Coattun S.PR.C30 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 25g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C50 | Kaltun Mining Co. | Coattun S.PR.C50 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 22g/100g and a density of 2.60g/cm3. | |
| AQUPAANA AP-40F | Sumitomo Seika America, Inc. | AQUPAANA AP-40F is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-40F has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-50 | Sumitomo Seika America, Inc. | AQUPAANA AP-50 is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-50 has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-50F | Sumitomo Seika America, Inc. | AQUPAANA AP-50F is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-50F has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-50M | Sumitomo Seika America, Inc. | AQUPAANA AP-50M is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-50M has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-70 | Sumitomo Seika America, Inc. | AQUPAANA AP-70 is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-70 has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| NATIONAL® STANDARD SPCL GRIND | Bentonite Performance Minerals | NATIONAL® STANDARD SPCL GRIND is a high yield, special mesh grind, Wyoming sodium bentonite. It is used as a binder, stabilizer, suspension agent, and rheological modifier. It has application as an additive for industrial coatings. | |
| PAT TTA | P.A.T. Products | PAT TTA is a granular tolyltriazole designed for use as a corrosion inhibitor in paint, ink, coating, and other applications. Stocked in the US in 55 lb resealable drums. Sodium salt liquid form also available. | Request Sample |
| Reservol Flake | Tiarco Chemical | Reservol Flake is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of yellow to tan flakes. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| TAMOL™ 2002 | Univar Solutions | TAMOL™ 2002 is a high-performance hydrophobic copolymer dispersant especially suitable for semigloss and gloss paints. It is supplied in unneutralized emulsion form, free of any APEO surfactants, designed to be a performance match for TAMOL™ 2001 dispersant. Relative to TAMOL™ 681, TAMOL™ 2002 provides reduced use cost, reduced as-supplied viscosity, lower odor, higher as-supplied solids, and formulation flexibility via choice of neutralizing base and absence of solvent. Sodium hydroxide, potassium hydroxide, sodium...view more TAMOL™ 2002 is a high-performance hydrophobic copolymer dispersant especially suitable for semigloss and gloss paints. It is supplied in unneutralized emulsion form, free of any APEO surfactants, designed to be a performance match for TAMOL™ 2001 dispersant. Relative to TAMOL™ 681, TAMOL™ 2002 provides reduced use cost, reduced as-supplied viscosity, lower odor, higher as-supplied solids, and formulation flexibility via choice of neutralizing base and absence of solvent. Sodium hydroxide, potassium hydroxide, sodium carbonate and AMP-95, as well as ammonia, can be used to neutralize the emulsion. view less | Request Sample |
| Reservol Powder | Tiarco Chemical | Reservol Powder is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of a yellow to tan powder. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| NATIONAL® STANDARD 325 | Bentonite Performance Minerals | NATIONAL® STANDARD 325 is a natural 325 mesh Wyoming sodium bentonite. This product is used as a binder, stabilizer, suspension agent, and rheological modifier. It has application as an additive for foundry coatings and industrial coatings. | |
| Paracryl® PC-8045 | Royal Coatings & Specialty Polymers (Para-Chem) | Paracryl® PC-8045 is a 34% ammoniated solution of a styrene-acrylic mid-range molecular weight resin. This product is used in paper and board ink applications and is a Sodium neutralized version of PC-8034. | |
| SIPERNAT® 835 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic ...view more SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic binders. view less | Request Sample |
| Crystal™ EX | PQ Corporation | Crystal™ EX is a water based silicic acid formulated with inorganic sodium compounds designed to maximize the polymerization performance, primarily when used as a co-binder, partially replacing latex emulsions, such as vinyl acrylic and styrene acrylic. | |
| VOLCLAY® SPV 200 | American Colloid Company | VOLCLAY® SPV 200 is a selectively-mined and processed, high-quality sodium bentonite. This product is a multi-purpose suspending, emulsifying, and binding agent used in industrial products where a dry 200 mesh particle size is required. | |
| T-Gum 103 | Tiarco Chemical | T-Gum 103 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, acrylic, neoprene, vinyl acetate, and ethylene-vinyl acetate ...view more T-Gum 103 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, acrylic, neoprene, vinyl acetate, and ethylene-vinyl acetate latex compounds. view less | |
| Ecodis™ P 50 | Arkema Rheology & Specialty Additives | Ecodis™ P 50 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration)...view more Ecodis™ P 50 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). view less | Request Sample |
| TARGON® 19 | ICL Phosphate Specialty | TARGON® 19 is a setting retarder composed of Sodium monofluorphosphate Na2PO3F. It is used for cement based products especially to get a steady consistency of the mortar during the application and the first hours until the begin of setting. | Request Sample |
| Budit 3 | BassTech International | Budit 3 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 3H | BassTech International | Budit 3H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4 | BassTech International | Budit 4 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4H | BassTech International | Budit 4H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6 | BassTech International | Budit 6 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6H | BassTech International | Budit 6H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7 | BassTech International | Budit 7 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7H | BassTech International | Budit 7H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 8H | BassTech International | Budit 8H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 9 | BassTech International | Budit 9 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Caustic Soda | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Caustic Soda, in the form of a glossy white granule or flake, is a dried form of lye. This product can be used in paper dyeing. It contains no more than 0.008% iron and no more than 0.05% sodium chloride. | |
| KCM 2000C | Vink Chemicals GmbH & Co. KG | KCM 2000C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...view more KCM 2000C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| KCM 1200C | Vink Chemicals GmbH & Co. KG | KCM 1200C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...view more KCM 1200C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| KCM 4000P | Vink Chemicals GmbH & Co. KG | KCM 4000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...view more KCM 4000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| KCM 6000P | Vink Chemicals GmbH & Co. KG | KCM 6000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...view more KCM 6000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| KCM 80000QD | Vink Chemicals GmbH & Co. KG | KCM 80000QD is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in indust...view more KCM 80000QD is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. view less | |
| BENTOBRITE® 770 | American Colloid Company | BENTOBRITE® 770 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This product is a suspending agent and gellant for use in household products, automotive products, aerosols, paints, enamels and othe...view more BENTOBRITE® 770 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This product is a suspending agent and gellant for use in household products, automotive products, aerosols, paints, enamels and other industrial applications. view less | |
| TARGON® FM | ICL Phosphate Specialty | TARGON® FM is a processing aid used as an auxiliary agent for cementitious leveling masses. It is a formulation of sodium phosphate, hydroxypoly carboxylic acid and wetting agent. This product is especially suited for ternary systems (Portland cement, gyp...view more TARGON® FM is a processing aid used as an auxiliary agent for cementitious leveling masses. It is a formulation of sodium phosphate, hydroxypoly carboxylic acid and wetting agent. This product is especially suited for ternary systems (Portland cement, gypsum, refractory cement). view less | Request Sample |
| TRM-3125 Pigment Dispersant and Scale Inhibitor | Dalian Trimer Chemical Co., Ltd. | TRM-3125 Pigment Dispersant and Scale Inhibitor is a carboxylate sodium salt polyelectrolyte. This product is used in water-based industrial coating including flat primers, low VOC paints, interior and exterior flat, sheen and semi-gloss paints and glossy...view more TRM-3125 Pigment Dispersant and Scale Inhibitor is a carboxylate sodium salt polyelectrolyte. This product is used in water-based industrial coating including flat primers, low VOC paints, interior and exterior flat, sheen and semi-gloss paints and glossy topcoats. view less |
