| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...view more 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. view less | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...view more 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. view less | |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...view more 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. view less | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...view more 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. view less | |
| Duramac® 74-7451 | Polynt Composites | Duramac® 74-7451 is a water reducible alkyd resin used as alternative to solvent baking alkyd systems, excellent hardness and flexibility, HAPs-free. | |
| Duramac® 216-3610 | Polynt Composites | Duramac® 216-3610 is a water reducible alkyd resin designed to produce stains with excellent penetration and performance when applied to wood and other porous substrates. | |
| Polychem 7775-EB-70 | OPC Polymers | Polychem 7775-EB-70 is a HAPs-free fast drying water-reducible alkyd resin. It is ideal for industrial and high-gloss DTM applications. It has excellent corrosion resistance and gloss retention along with great adhesion. | |
| Polychem 7776-PP-75 | OPC Polymers | Polychem 7776-PP-75 is a HAPs-free high solid fast drying water-reducible alkyd resin. It is ideal for industrial and high-gloss DTM applications. It has excellent corrosion resistance and gloss retention along with great adhesion. | |
| WREAMA | PCI Group, Inc. | WREAMA is a clear solution of a polyether-modified dimethyl polysiloxane co-polymer designed for use in all water based and water reducible alkyd resin systems. It is used to improve mar resistance, slip, flow and to enhance gloss. | |
| Duramac® 207-3119 | Polynt Composites | Duramac® 207-3119 is a water reducible short oil alkyd resin with good cost/performance balance, low VOC, good pigment wetting, HAPs-free. | |
| Duramac® 74-7474 | Polynt Composites | Duramac® 74-7474 is a water reducible chain-stopped alkyd resin for air and force-dry industrial coatings, excellent gloss and corrosion resistance, HAPs-free. | |
| Duramac® 74-7478 | Polynt Composites | Duramac® 74-7478 is a water reducible phenolic-modified alkyd resin for use in corrosion-resistant, non-lifting red oxide and black primers, excellent metal protection, HAPs-free. | |
| Rezimac® 74-7435 | Polynt Composites | Rezimac® 74-7435 is a water reducible silicone-modified alkyd resin, excellent gloss retention, fast air-dry and higher application solids than most water reducibles, HAPs-free, low VOC. | |
| Duramac® 74-7495 | Polynt Composites | Duramac® 74-7495 is a water reducible chain-stopped short oil alkyd resin for air and force-dry industrial coatings for metal surfaces, excellent exterior durability, HAPs-free. | |
| Macopol® 214-3100 | Polynt Composites | Macopol® 214-3100 is a water reducible acrylic-modified short oil alkyd resin for light-colored enamels, implement enamels, general metal finishes, excellent color and gloss retention, fast dry. | |
| Duramac® 207-3738 | Polynt Composites | Duramac® 207-3738 is a water reducible chain-stopped short oil alkyd resin, value engineered polymer for air and force-dry industrial topcoats and primers, excellent package stability, HAPs-free. | |
| Duramac® 207-3497 | Polynt Composites | Duramac® 207-3497 is a water reducible chain-stopped short oil alkyd resin for air and force-dry industrial coatings where labeling restrictions or product specifications require a higher flash point than typical water reducible alkyds, HAPs-free. | |
| 4947-SP-75 Water Reducible Alkyd | Gabriel Performance Products | 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated. | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| KELSOL® 585-W-43 | Polynt Composites | KELSOL® 585-W-43 is a water dispersion alkyd resin that can be used in high solids coatings for fast water reduction, inks requiring a quick set and early wet rub resistance, and as a modifier for other water-reducible resins or emulsions. It can also be ...view more KELSOL® 585-W-43 is a water dispersion alkyd resin that can be used in high solids coatings for fast water reduction, inks requiring a quick set and early wet rub resistance, and as a modifier for other water-reducible resins or emulsions. It can also be used in fast air-dry or force-dry industrial primers, enamels, and clear finishes. view less | |
| EFKA® FA 4666 | BASF Formulation Additives | EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents flooding/floating and stabilizes pigment dispersion. EFKA® FA 4666 is especially suited for medium to high-polarity binder systems, for example: alkyd/amino resin...view more EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents flooding/floating and stabilizes pigment dispersion. EFKA® FA 4666 is especially suited for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane systems, acrylic polyisocyanate systems (2-pack acrylics) and chlorinated polymers. view less | |
| EFKA® FA 4665 | BASF Formulation Additives | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin...view more EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. view less | |
| EFKA® FA 4654 | BASF Formulation Additives | EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin...view more EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin combinations and epoxies. EFKA® FA 4654 can cause discoloration in nitrocellulose varnishes. view less | |
| KELSOL® 3912-G4-75 | Polynt Composites | KELSOL® 3912-G4-75 is a water reducible alkyd designed to give higher solids at lower viscosity. It must be neutralized prior to the addition of water, and usually requires additional co-solvent for best solubility and stability in water thinned paints. | |
| Ottopol SF-42 | Gellner Industrial, LLC | Ottopol SF-42 is a translucent, anionic acrylic emulsion that is compatible with water-reducible alkyd emulsions. | |
| HPP-E-4024-19-65 | US Polymers - Accurez LLC | HPP-E-4024-19-65 is a water reducible phenolic alkyd designed to undergo air cure. It provides very good corrosion resistance, good gloss and color retention. | Request Sample |
| RayRez® 66 | Specialty Polymers | RayRez® 66 is a styrene-acrylic emulsion with excellent block resistance. Coatings formulated with RayRez® 66 have outstanding adhesion and gloss. Designed to have a low cosolvent demand, industrial coatings formulated with RayRez® 66 meet the strict VOC requirements needed in many of today’s applications. When blended with water reducible alkyds, coatings performance is enhanced and VOCs are reduced. Suggested for use in Industrial topcoats and primers for wood and metal, blending vehicle for water reducible alkyd...view more RayRez® 66 is a styrene-acrylic emulsion with excellent block resistance. Coatings formulated with RayRez® 66 have outstanding adhesion and gloss. Designed to have a low cosolvent demand, industrial coatings formulated with RayRez® 66 meet the strict VOC requirements needed in many of today’s applications. When blended with water reducible alkyds, coatings performance is enhanced and VOCs are reduced. Suggested for use in Industrial topcoats and primers for wood and metal, blending vehicle for water reducible alkyds, and in concrete floor paints. view less | |
| WorléeAdd 412 | Worlée-Chemie G.m.b.H. | WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the ...view more WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the system easier. By this, precipitation can be avoided. view less | |
| Polychem 7774-EB-85 | OPC Polymers | Polychem 7774-EB-85 is a HAP’s free high-solid, chain-stopped water-reducible alkyd. It has excellent flow and leveling properties and has been designed for low-VOC baking enamels (below 150 g/l). It can provide excellent hardness, adhesion, and gloss alo...view more Polychem 7774-EB-85 is a HAP’s free high-solid, chain-stopped water-reducible alkyd. It has excellent flow and leveling properties and has been designed for low-VOC baking enamels (below 150 g/l). It can provide excellent hardness, adhesion, and gloss along with good corrosion protection. view less | |
| SETAL® 41-1390 | Allnex | SETAL® 41-1390 exhibits the desirable properties of positive dry, good corrosion resistance and good mechanical properties. This resin is reduced in a "low HAP" type solvent blend. | Request Sample |
| RESYDROL® AX 246w/70BG | Allnex | Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade...view more Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. view less | Request Sample |
| RESYDROL® AX 247w/70BGMP | Allnex | Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-gra...view more Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. view less | Request Sample |
| EPOTUF® 37-151 | Polynt Composites | EPOTUF® 37-151 is a 100% solids, liquid epoxy resin that can be used in high solids coatings, high peel-strength adhesives, elastomeric coatings, and as a modifier for improving the end flexibility of alkyds, baking polyesters, and epoxies. This product h...view more EPOTUF® 37-151 is a 100% solids, liquid epoxy resin that can be used in high solids coatings, high peel-strength adhesives, elastomeric coatings, and as a modifier for improving the end flexibility of alkyds, baking polyesters, and epoxies. This product has thermal shock resistance, good weathering properties, with low reduced viscosity and water absorption. view less | |
| PAT-ADD DA 786 | Patcham USA | PAT-ADD DA 786 is a blend of anionic and non-ionic surface active compounds to use as emulsifier to allow the addition of water into oil based coating systems without any loss of Gloss and hardness of the final paint film. Main benefits are: excellent com...view more PAT-ADD DA 786 is a blend of anionic and non-ionic surface active compounds to use as emulsifier to allow the addition of water into oil based coating systems without any loss of Gloss and hardness of the final paint film. Main benefits are: excellent compatibility with all alkyd resins, strong water-alkyd hybrid resulting in longer stability, imparts high viscosity to the system thus reduces separation, no rusting or water separation on storage as well as on reduction, no reduction of gloss or hardness, and cost reduction. view less | Request Sample |
| ADDITOL® dry CF300 | Allnex | ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all...view more ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all oxidative drying waterborne alkyd resin paints. view less | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...view more Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. view less | Request Sample |
| ADDITOL® dry CF200 | Allnex | ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 fo...view more ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 for all oxidative drying waterborne alkyd resin paints. view less | Request Sample |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...view more HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. view less | Request Sample |
| BECKOSOL AQ® 206 | Polynt Composites | BECKOSOL AQ® 206, in the form of a milky, white liquid, is a medium-oil alkyd latex based on biorenewable fatty acids that can be used in OTC, CARB and AIM-compliant interior or exterior architectural enamels and decorative finishes in a range of glosses ...view more BECKOSOL AQ® 206, in the form of a milky, white liquid, is a medium-oil alkyd latex based on biorenewable fatty acids that can be used in OTC, CARB and AIM-compliant interior or exterior architectural enamels and decorative finishes in a range of glosses from very high gloss to satin. This product provides good initial film color and reduced long-term yellowing and cleans up with soap and water. view less | |
| WorléeSol E 927 W | Worlée-Chemie G.m.b.H. | WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with ...view more WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with excellent through drying and hardness even without the addition of a co-drier. W´Sol E 927 W also shows good compatibility with acrylic dispersions. view less | |
| RAYREZ® 66 | Specialty Polymers, Inc. | RAYREZ® 66 is an anionic styrene acrylic emulsion that has resistant technology. This product is a coating that can adhere to several different materials and provides a gloss finish. RAYREZ® 66 is formulated to meet strict VOC requirements for industrial coatings and has a low co-solvent demand. RAYREZ® 66 is primarily used to blend with water reducible alkyd...view more RAYREZ® 66 is an anionic styrene acrylic emulsion that has resistant technology. This product is a coating that can adhere to several different materials and provides a gloss finish. RAYREZ® 66 is formulated to meet strict VOC requirements for industrial coatings and has a low co-solvent demand. RAYREZ® 66 is primarily used to blend with water reducible alkyds to enhance coating performance and reduce VOC. RAYREZ® 66 provides resistance to chemical abrasion and scratches to surfaces that it is applied to. view less | |
| SYNTHEMUL® 40-416 | Polynt Composites | SYNTHEMUL® 40-416 is an all-acrylic, high-performance latex. This product offers resistance to efflorescence, early water resistance with reduced blistering, and adheres well to chalk and gloss alkyds. It can be used in a range of house paints from flat t...view more SYNTHEMUL® 40-416 is an all-acrylic, high-performance latex. This product offers resistance to efflorescence, early water resistance with reduced blistering, and adheres well to chalk and gloss alkyds. It can be used in a range of house paints from flat through semi-gloss styles, exterior opaque stains, masonry paints, primers, and as a clear wood sealer for urethane topcoats. view less | |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyd...view more HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. view less | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phos...view more HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. view less | Request Sample |
| WorléeSol E 150 W | Worlée-Chemie G.m.b.H. | WorléeSol E 150 W is a medium oil alkyd emulsion designed for the manufacture of air drying water thinnable high gloss top coats. This grade has a non volatile content of 40% ± 2. Top coats with high gloss, excellent hardness and very good water resistanc...view more WorléeSol E 150 W is a medium oil alkyd emulsion designed for the manufacture of air drying water thinnable high gloss top coats. This grade has a non volatile content of 40% ± 2. Top coats with high gloss, excellent hardness and very good water resistance can be formulated. Furthermore, a good outdoor resistance can occur. Other application fields for W´Sol E 150 W are air drying decorative, house and DIY-paints as well as wood protective glazings. view less | |
| HALOX® SZP-395 | ICL Phosphate Specialty | HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resin...view more HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin-film applications (<1 mil or 25 μm). The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| RHOPLEX™ AC-337N | Univar Solutions | RHOPLEX™ AC-337N is 100% Acrylic Emulsion is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. It reacts more efficiently with asso...view more RHOPLEX™ AC-337N is 100% Acrylic Emulsion is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. It reacts more efficiently with associative thickeners, leading potentially to lower formulation cost. RHOPLEX™ AC-337N also shows improved color acceptance and alkyd compatibility. The 100% acrylic backbone ensures the high standard of tint retention, crack resistance, chalk resistance, and alkali resistance. The outstanding adhesion technology will ensure excellent adhesion to wood. The in-can clarity makes it possible to prepare transparent and semi-transparent stains with more attractive application properties than conventional alkyd emulsion or acrylic emulsion based stains. view less | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyd...view more HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water...view more HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resin...view more HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| Bubreak® 4400 | Buckman Laboratories, Inc. | Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Adminis...view more Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4400 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. This product is effective in a wide range of resins, including acrylics, vinyl acrylics, poly vinyl acetates, and water-reducible alkyds. view less | |
| Bubreak® 454C | Buckman Laboratories, Inc. | Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and ...view more Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 454C has been designed to perform as both an antifoam, fighting foam formulation, and as a defoamer, breaking down existing foam. It is effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. view less | |
| LOXANOL® CA 5086 | BASF Formulation Additives | LOXANOL® CA 5086 is a clear liquid, nonvolatile, medium molecular weight coalescing solvent and plasticizer. This coalescent is compatible with acrylics, epoxies, alkyds, polyesters, and phenolic resins. Latex caulks incorporated with this product display...view more LOXANOL® CA 5086 is a clear liquid, nonvolatile, medium molecular weight coalescing solvent and plasticizer. This coalescent is compatible with acrylics, epoxies, alkyds, polyesters, and phenolic resins. Latex caulks incorporated with this product display excellent elongation and recovery properties. Most formulations can tolerate various loading levels and still provide flexibility without decreasing the caulks ability to adhere to various substrates. LOXANOL® CA 5086 increases flexibility and toughness, reduces brittleness, minimizes water sensitivity, and improves film formation. view less | |
| SETAL® 41-1449 | Allnex | SETAL® 41-1449 exhibits the desirable properties of very fast dry, good corrosion resistance and low application viscosity. SETAL® 41-1449 has better stability and maintains drying characteristics on aging than SETAL®41-1390. | Request Sample |
| Bubreak® 4419 | Buckman Laboratories, Inc. | Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances app...view more Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances approved for use under 21 CFR § 176.200 and 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water- and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4419 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. The product has proven effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. view less | |
| WorléeSol 30 100% | Worlée-Chemie G.m.b.H. | WorléeSol 30 100% is a chemically modified, very low viscous linseed oil polymer. This grade has a non volatile content of 100%. Because of its high and easy pigmentation, freeze/thaw stability and high gloss, there are many interesting application fields...view more WorléeSol 30 100% is a chemically modified, very low viscous linseed oil polymer. This grade has a non volatile content of 100%. Because of its high and easy pigmentation, freeze/thaw stability and high gloss, there are many interesting application fields including: printing inks; additive for dispersion systems; pigment preparations or tinting colours; artists' paints; and temporary anticorrosive paints. view less |
