| Crown Black™ 325 | Hiller Carbon, LLC. | Crown Black™ 325 is a high purity washed low volatile bituminous coal. It is finely ground and dried during the milling process to a very fine particle size recommended for use as a filler/extender in a wide variety of applic...view more Crown Black™ 325 is a high purity washed low volatile bituminous coal. It is finely ground and dried during the milling process to a very fine particle size recommended for use as a filler/extender in a wide variety of applications. Crown Black 325™ has excellent electrical insulation properties and readily disperses in natural and synthetic rubbers. view less | |
| Rockforce® MS610-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in r...view more Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in rheology control, dimensional stability, reinforcement, heat resistance, and chemical bonding with phenol and epoxy resins view less | |
| CoatForce® CF730 | Lapinus Fibres BV | CoatForce® CF730 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material. CoatForce® CF730 shows added value in rheology control, reinforcement, dimensional stability, and heat resistance...view more CoatForce® CF730 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material. CoatForce® CF730 shows added value in rheology control, reinforcement, dimensional stability, and heat resistance. view less | |
| CoatForce® CF30 | Lapinus Fibres BV | CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various pain...view more CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various paint and coating systems. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| Rockforce® MS605-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS605-Roxul®1000 is a high quality engineered mineral fibre. The relative long fibre is developed for use in wet mixing processes. Rockforce® MS605-Roxul®1000 is consistent in quality in terms of rheology control, reinforcement, dimensional sta...view more Rockforce® MS605-Roxul®1000 is a high quality engineered mineral fibre. The relative long fibre is developed for use in wet mixing processes. Rockforce® MS605-Roxul®1000 is consistent in quality in terms of rheology control, reinforcement, dimensional stability, and heat resistance. view less | |
| CoatForce® CF10 | Lapinus Fibres BV | CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. Th...view more CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. The off-white colour makes it especially suitable for decorative applications. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| CoatForce® CF50 | Lapinus Fibres BV | CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various p...view more CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various paint and coating systems. CoatForce® CF50 has an off-white colour and very low shot content. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| Rockforce® MS600-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS600-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS600-Roxul®1000 shows added values in rheology control, reinfor...view more Rockforce® MS600-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS600-Roxul®1000 shows added values in rheology control, reinforcement, dimensional stability, and heat resistance. view less | |
| Rockforce® MS730-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS730-Roxul®1000 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material, which is applied in refractory products and bitumen / asphalt. Rockforce® MS730-Roxul®1000 shows added...view more Rockforce® MS730-Roxul®1000 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material, which is applied in refractory products and bitumen / asphalt. Rockforce® MS730-Roxul®1000 shows added values in rheology control, reinforcement, dimensional stability, and heat resistance. view less | |
| Rockforce® MS603-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS603-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS603-Roxul®1000 shows added values in rheology control, reinfor...view more Rockforce® MS603-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS603-Roxul®1000 shows added values in rheology control, reinforcement, dimensional stability, and heat resistance. view less | |
| Magnum Fill™ HO97 | Mississippi Lime Company | Magnum Fill™ HO97 is a high brightness precipitated calcium carbonate designed as a functional filler for both the coatings and paper markets. This product comes in the form of a dry powder and has a median particle size of 1.6 microns. The crystal morpho...view more Magnum Fill™ HO97 is a high brightness precipitated calcium carbonate designed as a functional filler for both the coatings and paper markets. This product comes in the form of a dry powder and has a median particle size of 1.6 microns. The crystal morphology of Magnum Fill™ HO97 is intended to maximize opacity. view less | |
| Magnum Fill™ SD | Mississippi Lime Company | Magnum Fill™ SD is a high brightness precipitated calcium carbonate. This product is designed to maximize opacity due to its particle size distribution and crystal morphology. It comes in the form of a dry powder and has a median particle size of .8 micro...view more Magnum Fill™ SD is a high brightness precipitated calcium carbonate. This product is designed to maximize opacity due to its particle size distribution and crystal morphology. It comes in the form of a dry powder and has a median particle size of .8 microns. Magnum Fill™ SD is intended for use as functional filler in both coatings and paper markets. view less | |
| SpaceRite® S-3 Alumina Trihydrate | Huber Engineered Materials | SpaceRite® S-3 is a fine crystalline, aluminum trihydroxide with uniform particles averaging about one micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particle-size distribu...view more SpaceRite® S-3 is a fine crystalline, aluminum trihydroxide with uniform particles averaging about one micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particle-size distributions. SpaceRite S-3 can also replace other extenders providing enhanced performance and benefits in coatings and adhesives. SpaceRite S-3 has many uses in architectural coatings and high solids/low VOC coatings. view less | |
| Rockforce® MS640-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and im...view more Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and improved thermal resistance of the product. Rockforce® MS640-Roxul®1000 reduces the speed of deterioration of the rubber matrix, since engineered mineral fibres are not susceptible to ageing under the applied conditions. view less | |
| Rockforce® MS675-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS675-Roxul®1000 is a premium quality engineered mineral fibre. It is a medium length fibre with extreme low shot content, surface treated with a surfactant for excellent dispersion in bitumen / asphalt. Rockforce® MS675-Roxul®1000 can be used ...view more Rockforce® MS675-Roxul®1000 is a premium quality engineered mineral fibre. It is a medium length fibre with extreme low shot content, surface treated with a surfactant for excellent dispersion in bitumen / asphalt. Rockforce® MS675-Roxul®1000 can be used in a number of coating applications. It is especially suitable for replacing asbestos and cellulose fibres in bituminous roof coatings and water proofing coatings. Rockforce® MS675-Roxul®1000 is easy to use no major increase of viscosity during production, excellent viscosity building characteristics and controlled rheology, levelling and sag resistance. view less | |
| Rockforce® MS750-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of ch...view more Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of chemical composition, shot content, and fibre length. view less | |
| BENTONE® MA | Elementis | BENTONE® MA is a rheological additive based on a purified hectorite clay that imparts thixotropy and good anti-settling properties to water-borne systems. | Request Sample |
| Rockforce® RF840-Roxul®1000 | Lapinus Fibres BV | Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a signi...view more Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a significant better flexible strength and higher compression strength. Rockforce® RF840-Roxul®1000 is consistent in terms of chemical composition, surface treatment, purity, and fibre length. view less | |
| Acti-Gel® 208 | Active Minerals | Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and hom...view more Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and homogeneously disperses other particles in liquid systems creating a very stable mixture yet enables higher loadings of solids without increasing viscosity. Acti-Gel 208 additive can be a simple fix for syneresis, pigment float & flooding and sedimentation problems in a wide range of water-based coatings. Its low dosage, and extremely low residue makes it a quick “post-add” solution for stability problems in existing coating formulas without changing its rheology, paint formula or packaging label. view less | Request Sample |
| M-P-A® 14 | Elementis | M-P-A® 14 anti-settling agent is a special montmorilonite clay that has been organically modified. It has the distinctive feature of preventing hard settling of pigments in organic paint systems without appreciably contributing to an increase in apparent ...view more M-P-A® 14 anti-settling agent is a special montmorilonite clay that has been organically modified. It has the distinctive feature of preventing hard settling of pigments in organic paint systems without appreciably contributing to an increase in apparent (package) viscosity. view less | Request Sample |
| BENTONE® DH | Elementis | BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrifici...view more BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrificing performance . It is also crystalline silica-free; therefore, there are no Prop 65 reporting requirements. It is also compatible with a wide variety of rheological modifiers. Starting point formulations are available upon request. view less | Request Sample |
| Micral® AM550 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® AM550 is a narrow particle size distribution flame retardant and smoke suppressant with a median particle size of about 5.5 microns which offers a lower surface area. Used in adhesive, caulk, sealant and paints and coating applications. | |
| CreaMix TC 1004 | CreaFill Fibers Corp. | CreaMix TC 1004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use o...view more CreaMix TC 1004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 2004 | CreaFill Fibers Corp. | CreaMix TC 2004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use o...view more CreaMix TC 2004 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and acts as an absorbent. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 204 | CreaFill Fibers Corp. | CreaMix TC 204 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the...view more CreaMix TC 204 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 207 | CreaFill Fibers Corp. | CreaMix TC 207 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the...view more CreaMix TC 207 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 504 | CreaFill Fibers Corp. | CreaMix TC 504 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the...view more CreaMix TC 504 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 507 | CreaFill Fibers Corp. | CreaMix TC 507 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the...view more CreaMix TC 507 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaMix TC 1004/5 | CreaFill Fibers Corp. | CreaMix TC 1004/5 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce ...view more CreaMix TC 1004/5 is a natural reclaimed cellulose fiber that provides thickening, rheology, and sag and slump control. This product also provides reinforcement, and crack and shrinkage control. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose and fumed silica. view less | |
| CreaTech TC 2500 | CreaFill Fibers Corp. | CreaTech TC 2500 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose,...view more CreaTech TC 2500 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| RHODOLINE® OTE 600 | Univar Solutions | RHODOLINE® OTE 600 is an ecolabel compliant APE-free, low VOC and SVOC open time extender for waterborne coating formulations, which allows for improved applicability, flow and leveling, and film appearance. | Request Sample |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...view more ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...view more ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...view more ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...view more ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...view more ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...view more ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...view more ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...view more ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...view more ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...view more ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...view more ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...view more ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...view more ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...view more ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...view more ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...view more ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...view more ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...view more ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...view more ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| CreaTech TC 40 | CreaFill Fibers Corp. | CreaTech TC 40 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It works well in epoxy systems. This product can be used as a functional filler to reduce the use of more ex...view more CreaTech TC 40 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It works well in epoxy systems. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| CreaTech TC 90 | CreaFill Fibers Corp. | CreaTech TC 90 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It works well in epoxy systems. This product can be used as a functional filler to reduce the use of more ex...view more CreaTech TC 90 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It works well in epoxy systems. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| CreaTech TC 150 | CreaFill Fibers Corp. | CreaTech TC 150 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce t...view more CreaTech TC 150 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| CreaTech TC 200 | CreaFill Fibers Corp. | CreaTech TC 200 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce t...view more CreaTech TC 200 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| CreaTech TC 500 | CreaFill Fibers Corp. | CreaTech TC 500 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce t...view more CreaTech TC 500 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| CreaTech TC 750 | CreaFill Fibers Corp. | CreaTech TC 750 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce t...view more CreaTech TC 750 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...view more HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...view more HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...view more HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...view more HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...view more HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...view more HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...view more C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...view more C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...view more C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less | |
| Huberbrite® 1 Barium Sulfate | Huber Engineered Materials | Huberbrite® 1 is a high brightness, 1 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases spec...view more Huberbrite® 1 is a high brightness, 1 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. view less | |
| Huberbrite® 3 Barium Sulfate | Huber Engineered Materials | Huberbrite® 3 is a high brightness, 3 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases spe...view more Huberbrite® 3 is a high brightness, 3 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. view less | |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...view more Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. view less | |
| BENTONE® 34 | Elementis | BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems. | Request Sample |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...view more Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). view less | |
| Huberbrite® 10 Barium Sulfate | Huber Engineered Materials | Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases sp...view more Huberbrite® 10 is a high brightness, 10 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. view less | |
| Huberbrite® 7 Barium Sulfate | Huber Engineered Materials | Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases spe...view more Huberbrite® 7 is a high brightness, 7 micron ground barium sulfate that contains virtually no leachable barium compounds and passes Toxic Characteristic Leaching Procedure (TCLP) tests. It is traditionally used as a white extender that both increases specific gravity and improves the chemical resistance of the surface coating. It can also be used as a corrosion protective additive in paints and coatings due to its weather resistant properties. view less | |
| Vertal® 77 | Imerys Performance Additives | Vertal® 77 is a highly lamellar talc/carbonate mineral pigment that provides a unique balance of prime pigment spacing (opacity), film reinforcement, anti-cracking and barrier properties to architectural and decorative coatings. | |
| Vertal® 503 | Imerys Performance Additives | Vertal® 503 is a highly lamellar talc/carbonate mineral pigment that provides a unique balance of prime pigment spacing (opacity), film reinforcement, anti-cracking and barrier properties to architectural and decorative coatings. | |
| Blanc Fixe | BassTech International | Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consi...view more Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consistency, depending on the application and grade. view less | |
| R-8601 Alkyl Modified Polysiloxane | Zhejiang Feidian Chemical Co., Ltd. | R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorg...view more R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorganic fillers and polymers. view less | |
| Promisil SM | Industrias Promi de Occidente, S.A. de C.V | Promisil SM is a highly dispersed precipitated silica and higher density. It is used as reinforcing filler in the rubber industry and other compounds as anticaking powder. Applications include use in agriculture, coatings, footwear, fungicide, insecticide...view more Promisil SM is a highly dispersed precipitated silica and higher density. It is used as reinforcing filler in the rubber industry and other compounds as anticaking powder. Applications include use in agriculture, coatings, footwear, fungicide, insecticide, processing aid, paint, pesticide, plastics, PVC, sheet, reinforcement, salt and silicon rubber. view less | |
| Opacilite™ | Imerys Kaolin | Opacilite™ is a high whiteness, flash calcined kaolin produced by a special rapid heating process. This process creates large numbers of tiny, sealed voids within the kaolin particles, resulting in a low specific gravity and outstanding opacifying propert...view more Opacilite™ is a high whiteness, flash calcined kaolin produced by a special rapid heating process. This process creates large numbers of tiny, sealed voids within the kaolin particles, resulting in a low specific gravity and outstanding opacifying properties. view less | |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...view more LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. view less | Request Sample |
| Tioxsil | Micronized Products | Tioxsil is a super white pigment extender and opacifier. This product is most commonly used to prevent the sagging of paint films and to control the gloss, sheen, or luster within coatings. | |
| Promisil STD | Industrias Promi de Occidente, S.A. de C.V | Promisil STD is a highly dispersed precipitated silica has an affordable price. It is used as reinforcing filler in the rubber industry and as anti-caking agent in other compounds. It also provides thixotropic properties to the mixtures. Applications incl...view more Promisil STD is a highly dispersed precipitated silica has an affordable price. It is used as reinforcing filler in the rubber industry and as anti-caking agent in other compounds. It also provides thixotropic properties to the mixtures. Applications include use in agriculture, coatings, footwear, fungicide, insecticide, paint, pesticides, plastics, salt and silicon rubber. view less | |
| AC-67 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...view more AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. view less | |
| CAB-O-SIL® L90 | Univar Solutions | CAB-O-SIL® L90 is a low surface area fumed silica. It is untreated and provides rheology control and reinforcement for silicone sealants and elastomer applications. It is the most easily dispersed of Cabot’s untreated fumed silicas. | Request Sample |
| Nicron® 503 | Imerys Performance Additives | Nicron® 503 is a platy, high purity talc used in high solids/low VOC coating and adhesive applications which require low viscosity build extenders. | |
| Promisil 135-LS | Industrias Promi de Occidente, S.A. de C.V | Promisil 135-LS is a precipitated amorphous silica with superior dispersion. It has a median surface area, which facilitates perfect transparency. The high dispersion benefits the mixing of rubber components, so that favors the properties of tensile stren...view more Promisil 135-LS is a precipitated amorphous silica with superior dispersion. It has a median surface area, which facilitates perfect transparency. The high dispersion benefits the mixing of rubber components, so that favors the properties of tensile strength, abrasion resistance and tear resistance. Applications include wire, cable coverings, sportswear, shoe soles, solves, and paint. view less | |
| Gasil® 23F | PQ Corporation | Gasil® 23F is a high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented, water based coatings and printing inks. | |
| Gasil® HP260 | PQ Corporation | Gasil® HP260 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. It provides excellent matting efficiency combined with minimal ...view more Gasil® HP260 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. It provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties in thin film applications. view less | |
| Gasil® HP270 | PQ Corporation | Gasil® HP270 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. | |
| Gasil® HP280 | PQ Corporation | Gasil® HP280 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. This product provides excellent matting efficiency combined wit...view more Gasil® HP280 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. This product provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. view less | |
| Gasil® HP39 | PQ Corporation | Gasil® HP39 is a large particle, high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented water based coatings. It provides excellent matting efficiency combined with minimal effect on clarity and...view more Gasil® HP39 is a large particle, high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented water based coatings. It provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. view less | |
| Gasil® XE3100 | PQ Corporation | Gasil® XE3100 is a synthetic amorphous silica. It is used as an ultra high efficient silica matting agent. This product is suitable for wood, coil, and general industrial coatings. It performs well in waterbased formulations. | |
| Gasil® HP230 | PQ Corporation | Gasil® HP230 is a synthetic amorphous silica. It is used as a matting agent for thin film industrial coatings, inks and high transparency water-based coatings. Gasil® HP230 is a fine, light powder and care should be taken to avoid inhaling it. Face masks ...view more Gasil® HP230 is a synthetic amorphous silica. It is used as a matting agent for thin film industrial coatings, inks and high transparency water-based coatings. Gasil® HP230 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. view less | |
| SYLOID® 221 Matting Agent | GRACE | SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion fi...view more SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion finishes. view less | |
| SYLOID® 221 Matting Agent | Univar Solutions | SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion fi...view more SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion finishes. view less | Request Sample |
| SYLOID® 222 Matting Agent | GRACE | SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistan...view more SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistance to overgrind, less viscosity and neutral pH. view less | |
| SYLOID® 222 Matting Agent | Univar Solutions | SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistan...view more SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistance to overgrind, less viscosity and neutral pH. view less | Request Sample |
| SYLOID® 234 Matting Agent | Univar Solutions | SYLOID® 234 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for very thin films, leather and vinyl coatings, general industrial coatings and coatings or automotive plastic parts. Its key f...view more SYLOID® 234 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for very thin films, leather and vinyl coatings, general industrial coatings and coatings or automotive plastic parts. Its key features are: high matting effect, ease of dispersion, excellent film clarity and film smoothness and tight particle distribution. view less | Request Sample |
| SYLOID® 234 Matting Agent | GRACE | SYLOID® 234 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for very thin films, leather and vinyl coatings, general industrial coatings and coatings or automotive plastic parts. Its key f...view more SYLOID® 234 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for very thin films, leather and vinyl coatings, general industrial coatings and coatings or automotive plastic parts. Its key features are: high matting effect, ease of dispersion, excellent film clarity and film smoothness and tight particle distribution. view less | |
| SYLOID® 244X1517 Matting Agent | Univar Solutions | SYLOID® 244X1517 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high-efficiency, matting or gloss control agent designed for use in general industrial coatings, coil coatings and extrusion finishes. This ...view more SYLOID® 244X1517 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high-efficiency, matting or gloss control agent designed for use in general industrial coatings, coil coatings and extrusion finishes. This product has a high matting effect, ease of dispersion, resistance to overgrind, tight particle distribution and neutral pH. view less | Request Sample |
| SYLOID® 244X1517 Matting Agent | GRACE | SYLOID® 244X1517 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high-efficiency, matting or gloss control agent designed for use in general industrial coatings, coil coatings and extrusion finishes. This ...view more SYLOID® 244X1517 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high-efficiency, matting or gloss control agent designed for use in general industrial coatings, coil coatings and extrusion finishes. This product has a high matting effect, ease of dispersion, resistance to overgrind, tight particle distribution and neutral pH. view less | |
| SYLOID® 620 Matting Agent | GRACE | SYLOID® 620 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coil coatings, general industrial coatings, thick films, low gloss, low sheen applications an...view more SYLOID® 620 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coil coatings, general industrial coatings, thick films, low gloss, low sheen applications and textured finishes. This product is characterized by ease of dispersion, resistance to overgrind and neutral pH. view less | |
| SYLOID® 620 Matting Agent | Univar Solutions | SYLOID® 620 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coil coatings, general industrial coatings, thick films, low gloss, low sheen applications an...view more SYLOID® 620 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coil coatings, general industrial coatings, thick films, low gloss, low sheen applications and textured finishes. This product is characterized by ease of dispersion, resistance to overgrind and neutral pH. view less | Request Sample |
| SYLOID® 74 Regular Matting Agent | Univar Solutions | SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less im...view more SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less impact on viscosity and neutral pH. view less | Request Sample |
| SYLOID® 74 Regular Matting Agent | GRACE | SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less im...view more SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less impact on viscosity and neutral pH. view less | |
| SYLOID® 74X5500 Matting Agent | GRACE | SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less i...view more SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less impact on viscosity and neutral pH. view less | |
| SYLOID® 74X5500 Matting Agent | Univar Solutions | SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less i...view more SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less impact on viscosity and neutral pH. view less | Request Sample |
| SYLOID® 74X6000 Matting Agent | GRACE | SYLOID® 74X6000 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coal coatings, thin films, leather and vinyl coatings and general industrial coatings. Th...view more SYLOID® 74X6000 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coal coatings, thin films, leather and vinyl coatings and general industrial coatings. This product exhibits ease of dispersion, resistance to overgrind and neutral pH. view less | |
| SYLOID® 74X6000 Matting Agent | Univar Solutions | SYLOID® 74X6000 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coal coatings, thin films, leather and vinyl coatings and general industrial coatings. Th...view more SYLOID® 74X6000 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coal coatings, thin films, leather and vinyl coatings and general industrial coatings. This product exhibits ease of dispersion, resistance to overgrind and neutral pH. view less | Request Sample |
