| Resiflow® PH-240 | Estron Chemical, Inc. | Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat a...view more Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat adhesion and wetting on hydrophilic substrates such as sandblasted or unpolished metal. Resiflow® PH-240 can also improve or eliminate surface defects including orange peel, pinholes and craters. view less | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| Texipol® 63-510 | Scott Bader | Texipol® 63-510 is an inverse emulsion designed to thicken over a wide pH range, exceptional performance at low pH. | |
| T Gum 102 | Tiarco Chemical | T Gum 102 is an alkali swellable acrylic latex thickener that can be used for any alkaline pH coating. It is handled easily at low pH and develops good viscosity when the total pH is adjusted to the alkaline side. This product has good mechanical stabilit...view more T Gum 102 is an alkali swellable acrylic latex thickener that can be used for any alkaline pH coating. It is handled easily at low pH and develops good viscosity when the total pH is adjusted to the alkaline side. This product has good mechanical stability and is consistent in the manufacturing process. view less | |
| LOPON® PHB-C | ICL Phosphate Specialty | LOPON® PHB-C is a highly effective additive to stabilize the pH-value of emuslion-based systems. Interior wall paints can be stabilized at high pH-values which enables protection against microbiological attacks without using biocides. | Request Sample |
| TARGON® G3 | ICL Phosphate Specialty | TARGON® G3 is a secondary retarder which works in combination with citric or tartaric acid depending on the pH of the formulation. In formulations with an alkaline pH value, G3 works with tartaric acid. In formulations with a neutral pH, G3 works with cit...view more TARGON® G3 is a secondary retarder which works in combination with citric or tartaric acid depending on the pH of the formulation. In formulations with an alkaline pH value, G3 works with tartaric acid. In formulations with a neutral pH, G3 works with citric acid. TARGON® G3 helps to achieve constant setting, prolong working time, and improve the finish treating qualities. view less | Request Sample |
| TROYKYD® D472 | Arxada – Troy Corporation | Troykyd® D472 is a silicone-free liquid defoamer formulated for stability in higher pH (above 9) water-borne systems. USE Troykyd®D472 has been developed for applications where higher pH can cause the loss of defoaming efficiency over time. | Request Sample |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| Dynasylan® SIVO 111 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 111 resembles an alkaline neutralization agent which is suitable for adjusting the pH of Dynasylan® SIVO 110. | |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...view more LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. view less | Request Sample |
| ADDAPT® Foamstop™ 400F | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including extreme pH ...view more ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including extreme pH values (less than 3 or greater than 10). view less | |
| ADDAPT® Foamstop™ 400N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including formulations with extreme pH ...view more ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including formulations with extreme pH values (less than 3 or greater than 10). view less | |
| AERODISP® W 7520 P | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 P is a low viscosity, water-based dispersionof AEROSIL® fumed silica, with a slightly alkaline pH. | Request Sample |
| LOPON® PHB | ICL Phosphate Specialty | LOPON® PHB is a preparation of silanols and complex stabilization agent, used as an additive in dispersion systems and organo-silate systems. Already containing a silicate stabilizing agent, this product is suited to adjust and maintain a constant pH valu...view more LOPON® PHB is a preparation of silanols and complex stabilization agent, used as an additive in dispersion systems and organo-silate systems. Already containing a silicate stabilizing agent, this product is suited to adjust and maintain a constant pH value within paint or plaster in an alkaline environment (pH > 10). It can be applied jointly with potassium waterglass in a dispersion paint to support the biocide at pH levels >11. LOPON® PHB is commonly used as an additive in orgao-silicate paints and plasters. It delivers a range of desirable properties, including stabilization of viscosity during storage, enhancement of water resistance, reduction of thickening, ease of processing and mixing, and improvements in incorporating pigments and fillers. view less | Request Sample |
| ACRYSOL™ RM-8 | Univar Solutions | ACRYSOL™ RM-8 is a nonionic, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, which doesn't require pH adjustment for textile formulations. | Request Sample |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH ...view more H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. view less | |
| VANZAN® D | Vanderbilt Minerals, LLC | VANZAN® D is a xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH and temperature ranges. VANZAN® D is an easily dispersible grade that is activated when the pH ...view more VANZAN® D is a xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH and temperature ranges. VANZAN® D is an easily dispersible grade that is activated when the pH of the system is elevated. view less | Request Sample |
| Hydrite® R | Imerys Performance Additives | Hydrite® R is a fine particle size, pH neutral hydrous kaolin with a medium binder demand suitable for solvent and water based coatings. | |
| Hydrite® RS | Imerys Performance Additives | Hydrite® RS is a fine particle size, pH neutral hydrous kaolin with a medium binder demand suitable for water based coatings and adhesive applications. | |
| AMP REGULAR | Univar Solutions | AMP REGULAR is a very efficient co-dispersant for pigments, and contributes pH stability, low odor, and anticorrosive properties; furthermore, it promotes acceptance of colorants. | Request Sample |
| AERODISP® W 7520 NF | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications. | Request Sample |
| FUNGIPOL P21 | Chemipol | FUNGIPOL P21 is a broad-range dry film preservative based on a glycolic solution of IPBC, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Effective within a broad range of pH (until 10). Excellen...view more FUNGIPOL P21 is a broad-range dry film preservative based on a glycolic solution of IPBC, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Effective within a broad range of pH (until 10). Excellent fungicidal agent for preserving dry films of aqueous paints, polymeric dispersions, glues, mastics, and material protection. Dry-film preservative stable in a broad range of pH and temperatures. view less | Request Sample |
| Hydrite® RS-A | Imerys Performance Additives | Hydrite®RS-A is a fine particle size, acidic pH Hydrous kaolin with a medium binder demand suitable for water based coatings, inks, polymer & rubber applications. | |
| Jaypol™ A40 | Ashland | Jaypol™ A40 is a low viscosity dispersing agent for water-borne paints and coating systems. It offers versatility in PVC range and resin chemistry. It can be used as supplied. Use of Jaypol™ A40 should be limited to pH 5 - 10.5 and temperatures lower than...view more Jaypol™ A40 is a low viscosity dispersing agent for water-borne paints and coating systems. It offers versatility in PVC range and resin chemistry. It can be used as supplied. Use of Jaypol™ A40 should be limited to pH 5 - 10.5 and temperatures lower than 700° C. It can provide improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures of pH changes. view less | |
| Hydrite® R-A | Imerys Performance Additives | Hydrite®R-A is a fine particle size, acidic pH Hydrous kaolin with a medium binder demand suitable for solvent and water based coatings, inks, polymer & rubber applications. | |
| MERGAL® 395 | Arxada – Troy Corporation | MERGAL® 395 is a water-soluble bactericide on the basis of a hydantoin. The product shows excellent stability over a wide pH range, 3-10, also at elevated temperatures. | Request Sample |
| Polycol WP-05 | Polygal AG | POLYCOL WP-05 is a etherified polysaccaride with a low viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pig...view more POLYCOL WP-05 is a etherified polysaccaride with a low viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-05 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-05 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-05 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. view less | |
| Polycol WP-10 | Polygal AG | POLYCOL WP-10 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises ...view more POLYCOL WP-10 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-10 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-10 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-10 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. view less | |
| Polycol WP-15 | Polygal AG | POLYCOL WP-15 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises ...view more POLYCOL WP-15 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-15 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-15 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-15 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. view less | |
| Polycol WP-20 | Polygal AG | POLYCOL WP-20 is a etherified polysaccaride with a high viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pi...view more POLYCOL WP-20 is a etherified polysaccaride with a high viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-20 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-20 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-20 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. view less | |
| RHEOVIS® VP 1231 | BASF Formulation Additives | RHEOVIS® VP 1231 is a modified vinylpyrrolidone-vinylacetate copolymer thickener with maximum thickening effect at a pH of about 5; can be used as protective colloid in the production of dispersions. | |
| Nyacol® A1550pH7 | Nyacol Nano Technology | Nyacol® A1550pH7 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 7. It is used in the flame retardant treatments of DMAC solvent systems. | |
| ECOPOL-PP400S | Economy Polymers & Chemicals | ECOPOL-PP400S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP518S | Economy Polymers & Chemicals | ECOPOL-PP518S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| Triethanolamine 99 | Indorama Ventures | Triethanolamine 99 is obtained when ethylene oxide is added to diethanolamine. This product is 99% triethanolamine and is used in laundry detergents, hand dishwashing detergents, degreasers, hard surface cleaners and multifunctional detergents and disinfectants. It is also used as an alkali agent in automobile shampoos, polishing waxes, and multifunctional cleaners. Triethanolamine 99 is a weak base with hygroscopic properties, which makes it a good choice as an alkali agent in moisturizing hair products, like shampoos, conditioners, hairspray, liquids for perms, fixing gels, among others. In makeup and facial products, it can be used in eye shadows and pencils, mascaras, facial cleansers and eye creams and lotions. It also finds use in colognes, perfumes and bath oils for pH ...view more Triethanolamine 99 is obtained when ethylene oxide is added to diethanolamine. This product is 99% triethanolamine and is used in laundry detergents, hand dishwashing detergents, degreasers, hard surface cleaners and multifunctional detergents and disinfectants. It is also used as an alkali agent in automobile shampoos, polishing waxes, and multifunctional cleaners. Triethanolamine 99 is a weak base with hygroscopic properties, which makes it a good choice as an alkali agent in moisturizing hair products, like shampoos, conditioners, hairspray, liquids for perms, fixing gels, among others. In makeup and facial products, it can be used in eye shadows and pencils, mascaras, facial cleansers and eye creams and lotions. It also finds use in colognes, perfumes and bath oils for pH adjust. view less | |
| Triethanolamine 99 W | Indorama Ventures | Triethanolamine 99 W is obtained when ethylene oxide is added to diethanolamine. This product is 99% triethanolamine in an aqueous solution, and is used in laundry detergents, hand dishwashing detergents, degreasers, hard surface cleaners and multifunctional detergents and disinfectants. It is also used as an alkali agent in automobile shampoos, polishing waxes, and multifunctional cleaners. Triethanolamine 99 W is a weak base with hygroscopic properties, which makes it a good choice as an alkali agent in moisturizing hair products, like shampoos, conditioners, hairspray, liquids for perms, fixing gels, among others. In makeup and facial products, it can be used in eye shadows and pencils, mascaras, facial cleansers and eye creams and lotions. It also finds use in colognes, perfumes and bath oils for pH ...view more Triethanolamine 99 W is obtained when ethylene oxide is added to diethanolamine. This product is 99% triethanolamine in an aqueous solution, and is used in laundry detergents, hand dishwashing detergents, degreasers, hard surface cleaners and multifunctional detergents and disinfectants. It is also used as an alkali agent in automobile shampoos, polishing waxes, and multifunctional cleaners. Triethanolamine 99 W is a weak base with hygroscopic properties, which makes it a good choice as an alkali agent in moisturizing hair products, like shampoos, conditioners, hairspray, liquids for perms, fixing gels, among others. In makeup and facial products, it can be used in eye shadows and pencils, mascaras, facial cleansers and eye creams and lotions. It also finds use in colognes, perfumes and bath oils for pH adjust. view less | |
| MERGAL® 174II | Arxada – Troy Corporation | MERGAL® 174II is a liquid preservative used for the protection of water-based products against microbial spoilage in the wet state. The preservative is applicable at high pH and is compatible in many different systems. | Request Sample |
| BIOPOL XMD 5050 | Chemipol | BIOPOL XMD 5050 is a broad range in-can preservative based on MIT/BIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL XMD 5050 is an AOX & VOC free preservative. BIOPOL XMD 5050 is effective throughout a wide range of pH, from 2 to 10. BIOPOL XMD 5050 is stable in a broad range of pH ...view more BIOPOL XMD 5050 is a broad range in-can preservative based on MIT/BIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL XMD 5050 is an AOX & VOC free preservative. BIOPOL XMD 5050 is effective throughout a wide range of pH, from 2 to 10. BIOPOL XMD 5050 is stable in a broad range of pH and temperatures. Preservative specially well-suited for warm weather zones. view less | Request Sample |
| Strodex™ P-100 | Ashland | Strodex™ P-100 is recommended for use in water-reducible aklyd high-gloss enamel formulations to help stabilize the cobalt and zirconium drier-catalysts against hydrolysis and loss-of-dry activity at elevated pH levels. | |
| BIOPOL XMO 210 | Chemipol | BIOPOL XMO 210 is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & VOC & Formaldehyde free preservative. Cost-effective preservatives effective throughout a wide range of pH, from 2 to 10. BIOPOL XMO 210 balanced composition guarantees a long-term preservation action. BIOPOL XMO 210 is stable in a broad range of pH ...view more BIOPOL XMO 210 is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & VOC & Formaldehyde free preservative. Cost-effective preservatives effective throughout a wide range of pH, from 2 to 10. BIOPOL XMO 210 balanced composition guarantees a long-term preservation action. BIOPOL XMO 210 is stable in a broad range of pH and temperatures. Specially appropriate for formaldehyde-sensible products. view less | Request Sample |
| Triethanolamine 85 | Indorama Ventures | Triethanolamine 85 is obtained when ethylene oxide is added to diethanolamine. This product is 85% triethanolamine and is used in laundry detergents, hand dish washing detergents, degreasers, hard surface cleaners and multifunctional detergents and disinfectants. It is also used as an alkali agent in automobile shampoos, polishing waxes, and multifunctional cleaners. Triethanolamine 85 is a weak base with hygroscopic properties, which makes it a good choice as an alkali agent in moisturizing hair products, like shampoos, conditioners, hairspray, liquids for perms, fixing gels, among others. In makeup and facial products, it can be used in eye shadows and pencils, mascaras, facial cleansers and eye creams and lotions. It also finds use in colognes, perfumes and bath oils for pH ...view more Triethanolamine 85 is obtained when ethylene oxide is added to diethanolamine. This product is 85% triethanolamine and is used in laundry detergents, hand dish washing detergents, degreasers, hard surface cleaners and multifunctional detergents and disinfectants. It is also used as an alkali agent in automobile shampoos, polishing waxes, and multifunctional cleaners. Triethanolamine 85 is a weak base with hygroscopic properties, which makes it a good choice as an alkali agent in moisturizing hair products, like shampoos, conditioners, hairspray, liquids for perms, fixing gels, among others. In makeup and facial products, it can be used in eye shadows and pencils, mascaras, facial cleansers and eye creams and lotions. It also finds use in colognes, perfumes and bath oils for pH adjust. Triethanolamine can also be used as the neutralizing agent for long-chain fatty acids, such as lauric, ricinoleic, oleic and stearic acids, forming TEA-Soaps. These soaps are soluble in water and have emulsifying properties. When used in soap-based liquid detergents or in transparent pine oil-based detergent/disinfectants, TEA-soap can promoting a blooming effect when the detergent is diluted in water. view less | |
| Soluryl S-840 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-840 is a Styrene Acrylic resin for the neutral pH water-based products and is compatible with most common emulsions. It provides high gloss, good pigment dispersion, and good polymer surfactant for emulsion polymerization. | |
| Nyacol® A1550 | Nyacol Nano Technology | Nyacol® A1550 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 5. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| PROXEL® AQ | Arxada – Troy Corporation | PROXEL® AQ is a broad-spectrum biocide for the preservation of industrial water-based products against spoilage from micro-organisms. PROXEL® AQ is an aqueous solution of 1,2-benzisothiazolin-3-one (BIT) that is pH and temperature stable. | Request Sample |
| Monoethanolamine | Indorama Ventures | Monoethanolamine is the simplest of the ethanolamines and results from the reaction of ammonia with ethylene oxide. It is used in laundry detergents, hand and dish washing detergents, degreasers, hard surface cleaners and multifunctional detergents and di...view more Monoethanolamine is the simplest of the ethanolamines and results from the reaction of ammonia with ethylene oxide. It is used in laundry detergents, hand and dish washing detergents, degreasers, hard surface cleaners and multifunctional detergents and disinfectants. Monoethanolamine is an alkali agent widely used in hair dyes. This product is also suitable for automotive shampoos, degreasers, and waxes. view less | |
| Diethanolamine | Indorama Ventures | Diethanolamine is obtained when monoethanolamine reacts with ethylene oxide. It is recommended as starting material in the synthesis of alkanolamides from their reactions with fatty acid, alkyl methyl esters or triglyceride oils. Alkanolamides find use in...view more Diethanolamine is obtained when monoethanolamine reacts with ethylene oxide. It is recommended as starting material in the synthesis of alkanolamides from their reactions with fatty acid, alkyl methyl esters or triglyceride oils. Alkanolamides find use in various industrial segments, such as HI&I, Personal Care, Metal working lubricating oils, Mining ore flotation, etc. It is used in laundry detergents, hand and dish washing detergents, degreasers, hard surface cleaners and multifunctional detergents and disinfectants. This product is also suitable for automotive shampoos, degreasers, and waxes. view less | |
| Busperse® 2181 | Buckman Laboratories, Inc. | Busperse® 2181 is a patented surfactant used in coatings, stains, and clear finishes. It is a 30%-active, emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 8. The product is generally nonionic at neutral to alkaline pH ...view more Busperse® 2181 is a patented surfactant used in coatings, stains, and clear finishes. It is a 30%-active, emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 8. The product is generally nonionic at neutral to alkaline pH and slightly cationic at acidic pH. Busperse® 2181 disperses well in aqueous systems. It is not soluble in petroleum distillates, such as mineral spirits, toluene, xylene, aromatic 150, or VM&P naptha. The product is soluble in solvent systems that contain oxygenated solvents, such as glycols, glycol ethers, ketones, and acetates. view less | |
| Bubond® 396 | Buckman Laboratories, Inc. | Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration commonly known as “tannin staining.” Bubond® 396 can be post added to the coating or added in the letdown. In formulations that are pH-adjusted to the alkaline side, Bubond® 396 should preferably be added prior to neutralization since the product is acidic in nature and could cause pH ...view more Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration commonly known as “tannin staining.” Bubond® 396 can be post added to the coating or added in the letdown. In formulations that are pH-adjusted to the alkaline side, Bubond® 396 should preferably be added prior to neutralization since the product is acidic in nature and could cause pH shock if added directly into an alkaline system. view less | |
| Busperse® 2180 | Buckman Laboratories, Inc. | Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The product is generally nonionic at neutral to alkaline pH ...view more Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The product is generally nonionic at neutral to alkaline pH and slightly cationic at acidic pH. Busperse® 2180 disperses in aqueous systems with good agitation. It is not soluble in petroleum distillates, such as mineral spirits, toluene, xylene, aromatic 150, or VM&P naptha. The product is soluble in solvent systems that contain oxygenated solvents, such as glycols, glycol ethers, ketones, and acetates. view less | |
| Soluryl RH-615 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RH-615 is a Styrene-Acryl Emulsion for Heat Seal application that is compatible with a wide range of other acrylics. It is clear and transparent, has good adhesion, good heat seal properties, and good viscosity stability as pH. | |
| ECOPOL-518P | Economy Polymers & Chemicals | ECOPOL-518P is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product appears as a yellow powder and is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP18S | Economy Polymers & Chemicals | ECOPOL-PP18S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product appears as a yellow powder and is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| APMMEA-WB AMINE NEUTRALIZER FOR LATEX PAINTS | Huntsman Performance Products | APMMEA-WB Amine Neutralizer for Latex Paints is a colourless to light yellow, low viscosity liquid that has a high flash point. It is miscible with many solvents which gives it many different applications. Some applications include neutralizers, pH contro...view more APMMEA-WB Amine Neutralizer for Latex Paints is a colourless to light yellow, low viscosity liquid that has a high flash point. It is miscible with many solvents which gives it many different applications. Some applications include neutralizers, pH controller, a co-dispersant, and a wetting agent. view less | |
| B507 | Tianyi Chemical Engineering Material Co., Ltd. | B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B307 | Tianyi Chemical Engineering Material Co., Ltd. | B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B607 | Tianyi Chemical Engineering Material Co., Ltd. | B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B207 | Tianyi Chemical Engineering Material Co., Ltd. | B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B205 | Tianyi Chemical Engineering Material Co., Ltd. | B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| A163 | Tianyi Chemical Engineering Material Co., Ltd. | A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B596 | Tianyi Chemical Engineering Material Co., Ltd. | B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| ADDAPT® Foamstop™ 200N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegrada...view more ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegradable. view less | |
| DISPEX® AA 4140 | BASF Formulation Additives | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH ...view more DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. view less | |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH ...view more Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. view less | Request Sample |
| TROYKYD® D767 | Arxada – Troy Corporation | TROYKYD® D767 is a highly effective mineral oil and silicone-free defoamer for aqueous systems. It is effective over a wide range of pH and temperature. This product exhibits good compatibility and is extremely effective in thin systems. such as ad-mixtur...view more TROYKYD® D767 is a highly effective mineral oil and silicone-free defoamer for aqueous systems. It is effective over a wide range of pH and temperature. This product exhibits good compatibility and is extremely effective in thin systems. such as ad-mixtures, and polymer emulsions. view less | Request Sample |
| HS2288 | Tianyi Chemical Engineering Material Co., Ltd. | HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/...view more HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/cm3. view less | |
| ADDAPT® Foamstop™ 150N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective over a wide pH ...view more ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective over a wide pH range. view less | |
| SYLOID® 74X5500 Matting Agent | Univar Solutions | SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less i...view more SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less impact on viscosity and neutral pH. view less | Request Sample |
| SYLOID® 74X5500 Matting Agent | GRACE | SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less i...view more SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less impact on viscosity and neutral pH. view less | |
| DENSIPOL DF 152 | Chemipol | DENSIPOL DF 152 is an antifoaming agent based on an alkylene oxide copolymer on fatty alcohol. Effective throughout a wide range of pH, salinity, and temperature. Highly effective controlling the foaming generation process in urban and industrial wastewat...view more DENSIPOL DF 152 is an antifoaming agent based on an alkylene oxide copolymer on fatty alcohol. Effective throughout a wide range of pH, salinity, and temperature. Highly effective controlling the foaming generation process in urban and industrial wastewater plants and other water-based systems. view less | Request Sample |
| PEL-SIL CW300 | Ele Corporation | PEL-SIL CW300 is a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other...view more PEL-SIL CW300 is a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other anionic sirfactants and nonionic surfactants. view less | |
| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...view more ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. view less | |
| BW300 | Tianyi Chemical Engineering Material Co., Ltd. | BW300, in the form of a dry, white, micronized powder. is a water-borne matting agent that can be used in coatings. This product is chemically inactive and has an amorphous form with a high specific surface area. Its pH value is between 5.5 and 7.0. | |
| BW330 | Tianyi Chemical Engineering Material Co., Ltd. | BW330, in the form of a dry, white, micronized powder. is a water-borne matting agent that can be used in coatings. This product is chemically inactive and has an amorphous form with a high specific surface area. Its pH value is between 5.5 and 7.0. | |
| SYLOID® 74 Regular Matting Agent | GRACE | SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less im...view more SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less impact on viscosity and neutral pH. view less | |
| SYLOID® 74 Regular Matting Agent | Univar Solutions | SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less im...view more SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less impact on viscosity and neutral pH. view less | Request Sample |
| EMULTROL DFM OLM-22 | Concentrol, S.A., Productos | EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Exc...view more EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. view less | |
| Proxel Spektra™ Preservative | Arxada | Proxel Spektra™ Preservative is a dual-active, broad-spectrum biocide for the wet-state preservation of industrial, water-based products that prevents spoilage caused by microorganisms. This product is MIT- free, pH and temperature stable and offers a pow...view more Proxel Spektra™ Preservative is a dual-active, broad-spectrum biocide for the wet-state preservation of industrial, water-based products that prevents spoilage caused by microorganisms. This product is MIT- free, pH and temperature stable and offers a powerful antimicrobial effect for preservation of the finished product. view less | |
| VINAVIL® PA2000 | VINAVIL Americas Corp. | VINAVIL® PA2000 is a hydrophobically modified alkali swellable emulsion (HASE) that can be used as a rheology modifier in water-based paints, textile coatings, and construction products. This product works best when neutralized with potassium, ammonium, or sodium hydroxides at a pH ...view more VINAVIL® PA2000 is a hydrophobically modified alkali swellable emulsion (HASE) that can be used as a rheology modifier in water-based paints, textile coatings, and construction products. This product works best when neutralized with potassium, ammonium, or sodium hydroxides at a pH between 7.0 and 10.0. view less | |
| ADDAPT® Foamstop™ WS 17 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint,...view more ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint, printing ink, floor polish, and other applications. view less | |
| SYLOID® 222 Matting Agent | Univar Solutions | SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistan...view more SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistance to overgrind, less viscosity and neutral pH. view less | Request Sample |
| SYLOID® 222 Matting Agent | GRACE | SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistan...view more SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistance to overgrind, less viscosity and neutral pH. view less | |
| MERGAL® CM 1.5 | Arxada – Troy Corporation | MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra filtrations units. It is suitable for systems with a pH ...view more MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra filtrations units. It is suitable for systems with a pH of 3 - 9. view less | Request Sample |
| METOLAT® 365 | Munzing Chemie | METOLAT® 365 is a yellowish, clear non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT® 365 improves substrate and pigment wetting. It shows a very broad pH ...view more METOLAT® 365 is a yellowish, clear non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT® 365 improves substrate and pigment wetting. It shows a very broad pH stability. view less | |
| HS971 | Tianyi Chemical Engineering Material Co., Ltd. | HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...view more HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. view less | |
| HS973 | Tianyi Chemical Engineering Material Co., Ltd. | HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...view more HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. view less | |
| HS975 | Tianyi Chemical Engineering Material Co., Ltd. | HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...view more HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. view less | |
| VANZAN® | Vanderbilt Minerals, LLC | VANZAN® is a standard grade xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH ...view more VANZAN® is a standard grade xanthan gum rheological additive that yields unique pseudoplastic properties for aqueous coatings. It is excellent for systems that require a high level of sag control. This product is very stable in the presence of salts as well as extreme pH and temperature ranges. view less | Request Sample |
| B812 | Tianyi Chemical Engineering Material Co., Ltd. | B812, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.2 and 6.5 in a ...view more B812, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.2 and 6.5 in a 5% solvent solution. view less | |
| B814 | Tianyi Chemical Engineering Material Co., Ltd. | B814, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 6.0 and 6.5 in a ...view more B814, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 6.0 and 6.5 in a 5% solvent solution. view less | |
| B816 | Tianyi Chemical Engineering Material Co., Ltd. | B816, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 6.0 and 6.5 in a ...view more B816, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 6.0 and 6.5 in a 5% solvent solution. view less | |
| B818 | Tianyi Chemical Engineering Material Co., Ltd. | B818, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a ...view more B818, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a 5% solvent solution. view less | |
| B810 | Tianyi Chemical Engineering Material Co., Ltd. | B810, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a ...view more B810, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a 5% solvent solution. view less | |
| B820 | Tianyi Chemical Engineering Material Co., Ltd. | B820, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a ...view more B820, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a 5% solvent solution. view less | |
| Caustic Soda | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Caustic Soda, in the form of a glossy white granule or flake, is a dried form of lye. This product can be used in paper dyeing. It contains no more than 0.008% iron and no more than 0.05% sodium chloride. | |
| AGITAN® DF 677 | Munzing Chemie | AGITAN® DF 677 is a liquid yellow mixture of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good versatility, compatibility and is effective over a wide pH range. It is commonly used in adhesive...view more AGITAN® DF 677 is a liquid yellow mixture of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good versatility, compatibility and is effective over a wide pH range. It is commonly used in adhesives and emulsion paints. view less | |
| ADDAPT® Foamstop™ 666K | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective over a wide pH ...view more ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective over a wide pH range and a high temperature range. view less | |
| AGITAN® A209 | Munzing Chemie | AGITAN® A209 is a liquid brown, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It has high efficiency, good versatility, compatibility, and effectiveness over a range of pH and temperature levels. It is commonly used in architectural c...view more AGITAN® A209 is a liquid brown, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It has high efficiency, good versatility, compatibility, and effectiveness over a range of pH and temperature levels. It is commonly used in architectural coatings and plasters, printing inks, adhesives and paper coatings. view less | |
| DENSIPOL PS 200 | Chemipol | DENSIPOL PS 200 is an emulsion antifoaming agent based on organic, modified silicones suitable for a broad range of pH and temperatures. Highly effective in controlling the foaming generation process in several industrial processes, specially taladrines, ...view more DENSIPOL PS 200 is an emulsion antifoaming agent based on organic, modified silicones suitable for a broad range of pH and temperatures. Highly effective in controlling the foaming generation process in several industrial processes, specially taladrines, industrial lubricants, and coolants. Cost-effective antifoaming agent. Great long-term foaming control. view less | Request Sample |
| ATM1011 | Tianyi Chemical Engineering Material Co., Ltd. | ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. view less | |
| ATM9003 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. view less | |
| ATM9000 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution view less | |
| ATM9006 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution view less | |
| ATM9030 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution view less |
