| Bubond® 396 | Buckman Laboratories, Inc. | Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration ...view more Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration commonly known as “tannin staining.” Bubond® 396 can be post added to the coating or added in the letdown. In formulations that are pH-adjusted to the alkaline side, Bubond® 396 should preferably be added prior to neutralization since the product is acidic in nature and could cause pH shock if added directly into an alkaline system. view less | |
| Busan® 11-M1 | Buckman Laboratories, Inc. | Busan® 11-M1 is a multifunctional pigment for protection against corrosion, tannin staining, and UV light. This product is also an effective fire retardant and is used extensively to enhance the long-term performance and durability of paints. Busan® 11-M1...view more Busan® 11-M1 is a multifunctional pigment for protection against corrosion, tannin staining, and UV light. This product is also an effective fire retardant and is used extensively to enhance the long-term performance and durability of paints. Busan® 11-M1 is the commercial form of modified barium metaborate monohydrate. It is 90+% active calculated as BaB2O4 H2O. view less | |
| Busan® 11-M2 | Buckman Laboratories, Inc. | Busan® 11-M2 is a multifunctional pigment for use in coatings as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer. Because it is multifunctional, Busan® 11-M2 can replace several products commonly formulated i...view more Busan® 11-M2 is a multifunctional pigment for use in coatings as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer. Because it is multifunctional, Busan® 11-M2 can replace several products commonly formulated into coating systems, simplifying formulating and lowering costs. Busan® 11-M2 is based on barium metaborate monohydrate. Due to the low refractive index (1.55–1.60), it can be used in a wide variety of colors, whites, and even clears. Busan® 11-M2 is composed of substances approved for use under 21 CFR § 176.180 of the U.S. Food and Drug Administration regulations. view less | |
| Butrol® 9140 | Buckman Laboratories, Inc. | Butrol® 9140 is a finely ground, multifunctional pigment based on barium metaborate monohydrate for use as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer in coatings. The product’s multifunctionality enables...view more Butrol® 9140 is a finely ground, multifunctional pigment based on barium metaborate monohydrate for use as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer in coatings. The product’s multifunctionality enables it to replace several products commonly formulated into coatings systems, thereby simplifying formulating. Because this pigment is ground to 1.5 microns, there is an increased surface area which can give equal or greater performance at lower use levels than other protective pigments. Butrol® 9140 is composed of substances approved for use under 21 CFR § 176.180 of the U.S. Food and Drug Administration regulations. view less | |
| HALOX® XTAIN® L-47 | ICL Phosphate Specialty | HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane disp...view more HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane dispersions (PUD) applied to a variety of wood species for example, redwood, Merbau, and oak. It offers superior performance without the need for Zn2+ cations thus conforming to European ecolabel requirements. HALOX® XTAIN® L-47 provides similar efficiency as its predecessor HALOX® XTAIN® L-44. Recommended dosage level is 1-3% based on total formula weight. view less | Request Sample |
