UL Prospector

Success!

Successfully saved your search
Request Sample A-C® 1660 Univar Solutions A-C® 1660 is high melt temperature, hard polypropylene (PP) homopolymer for use in solvent borne coatings and hot melt adhesives to improve surface properties (drag) and heat resistance.
Request Sample A-C® 1702 Univar Solutions A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by...view more A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. view less
Request Sample A-C® 1754 Univar Solutions A-C® 1754 is a polypropylene homopolymer.
Request Sample A-C® 316A Univar Solutions A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion re...view more A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
Request Sample A-C® 325 Univar Solutions A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
Request Sample A-C® 330 Univar Solutions A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
Request Sample A-C® 392 Univar Solutions A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
Request Sample A-C® 3A Univar Solutions A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the sur...view more A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the surface and therefore improving mar and abrasion resistance. . view less
Request Sample A-C® 400 Univar Solutions A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appli...view more A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. view less
Request Sample A-C® 405M Univar Solutions A-C® 405M is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats.
Request Sample A-C® 405T Univar Solutions A-C® 405T is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats.
Request Sample A-C® 415 Univar Solutions A-C® 415 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 15%, developed specifically to be used as an adhesive flooding compound between the cable bundle and extruded outer jacket in the manufacturing of cables. .
Request Sample A-C® 5120 Univar Solutions A-C® 5120 is ethylene acrylic acid copolymer in a prill form, with an acrylic acid content of 15%, promotes adhesion to various substrates, and rheology control for solventborne coatings.
Request Sample A-C® 540 Univar Solutions A-C® 540 is ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation.
Request Sample A-C® 540A Univar Solutions A-C® 540A is ethylene acrylic acid (EAA) copolymer in a powder form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation.
Request Sample A-C® 573P Univar Solutions A-C® 573P is ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid content of 10%, improves adhesion to various substrates, provides rheology control for solvent borne coatings along with providing metallic flake orientation.
Request Sample A-C® 596P Univar Solutions A-C® 596P is Propylene Maleic Anhydride Copolymer, with a SAP # of 50, in pastille form, provides non polar and polar characteristics which boost adhesion while maintaining oxadative stability.
Request Sample A-C® 6 Univar Solutions A-C® 6 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as ...view more A-C® 6 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. view less
Request Sample A-C® 617 Univar Solutions A-C® 617 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 617A Univar Solutions A-C® 617A is low density polyethylene (LDPE) homopolymer in a powder form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 629 Univar Solutions A-C® 629 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 629 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
Request Sample A-C® 629A Univar Solutions A-C® 629A is low density Oxidized Polyethylene homopolymer in powder form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lo...view more A-C® 629A is low density Oxidized Polyethylene homopolymer in powder form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
Request Sample A-C® 656 Univar Solutions A-C® 656 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 656 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
Request Sample A-C® 6702 Univar Solutions A-C® 6702 is grease like, low temperature, completely amorphous, Low density Oxidized Polyethylene Homopolymer which can be emulsified for use in aqueous systems, for applications such as mold release and lubricants.
Request Sample A-C® 680 Univar Solutions A-C® 680 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 680 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
Request Sample A-C® 6A Univar Solutions A-C® 6A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 725 Univar Solutions A-C® 725 is low density polyethylene (LDPE) Homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. .
Request Sample A-C® 725P Univar Solutions A-C® 725P is low density polyethylene (LDPE) Homopolymer in a pastille form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. .
Request Sample A-C® 8 Univar Solutions A-C® 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 820A Univar Solutions A-C® 820A is very low viscosity, medium density polyethylene (PE) homopolymer for use in solvent borne coatings, in heatset and liquid solvent borne inks to improve mar & abrasion (rub resistance) by lowering COF(Increasing slip).
Request Sample A-C® 8A Univar Solutions A-C® 8A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 9 Univar Solutions A-C® 9 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample A-C® 9A Univar Solutions A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Request Sample ACLYN 295-A Univar Solutions ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carri...view more ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carrier. view less
Request Sample ACUMIST A-12 Univar Solutions ACUMIST A-12 is Micronized Oxidized Polyethylene Homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints.
Request Sample ACUMIST A-6 Univar Solutions ACUMIST A-6 is Small particle size Oxidized high density Polyethylene available for water or solvent based thin film applications. Excellent slip, and abrasion resistance., Used in flexographic inks, wood and industrial coatings applications.
Request Sample ACUMIST B-12 Univar Solutions ACUMIST B-12 is Micronized Polyethylene Homopolymer for use in solvent borne coatings, stains and lacquers, and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperat...view more ACUMIST B-12 is Micronized Polyethylene Homopolymer for use in solvent borne coatings, stains and lacquers, and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. view less
Request Sample ACUMIST B-6 Univar Solutions ACUMIST B-6 is Micronized Polyethylene Homopolymer for use in general purpose and high gloss solvent borne and UV/EB cured coatings, can and container coatings, solvent based gravure and flexographic and generally liquid inks. It is especially useful for ...view more ACUMIST B-6 is Micronized Polyethylene Homopolymer for use in general purpose and high gloss solvent borne and UV/EB cured coatings, can and container coatings, solvent based gravure and flexographic and generally liquid inks. It is especially useful for improving slip and rubs in inks. view less
Request Sample ACUMIST C-12 Univar Solutions ACUMIST C-12 is for solvents based gravure ink and industrial coatings applications. Excellent slip ,an, rubs, abrasion resistance.
Request Sample AQUACER 1013 BYK AQUACER 1013 is a VOC-free HDPE-based wax emulsion for improving the surface protection in aqueous coatings and printing inks as well as in aqueous care products and polishes.
Request Sample AQUACER 1035 BYK AQUACER 1035 is a modified polypropylene wax emulsion for the textile industry, metal industry and for floor care products.
Request Sample AQUACER 1039 BYK AQUACER 1039 is a paraffin wax emulsion for improved surface characteristics in aqueous coatings and printing inks.
Request Sample AQUACER 1061 BYK AQUACER 1061 is an emulsion of an ethylene-acrylic acid copolymer wax for improving the surface characteristics of paper.
Request Sample AQUACER 1510 BYK AQUACER 1510 is a polypropylene wax emulsion for aqueous glass fiber sizings to improve the mechanical properties in glass fiber- reinforced PP compounds.
Request Sample AQUACER 2500 BYK AQUACER 2500 is a wax emulsion on the basis of modified PE for aqueous foil and paper coatings to improve slip and abrasion resistance.
Request Sample AQUACER 3500 BYK AQUACER 3500 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting.
Request Sample AQUACER 494 BYK AQUACER 494 is an aqueous paraffin wax emulsion for care products and polishes.
Request Sample AQUACER 497 BYK AQUACER 497 is a paraffin-based wax emulsion for aqueous coatings, printing inks as well as care products and polishes for improving water repellency and surface slip.
Request Sample AQUACER 501 BYK AQUACER 501 is an HDPE-based wax emulsion for aqueous systems to improve surface protection.
Request Sample AQUACER 527 BYK AQUACER 527 is a wax emulsion based on a modified EVA copolymer wax to improve surface characteristics in aqueous coating systems and printing inks.
Request Sample AQUACER 530 BYK AQUACER 530 is a wax emulsion for improved surface characteristics in aqueous printing inks, overprint varnishes, wood and furniture coatings as well as inkjet inks.
Request Sample AQUACER 532 BYK AQUACER 532 is an emulsion of a modified HD polyethylene wax for improved surface characteristics in aqueous coating systems.
Request Sample AQUACER 541 BYK AQUACER 541 is an aqueous emulsion of a montan ester wax for care products and polishes as well as for aqueous coating systems and leather coatings.
Request Sample AQUACER 561 BYK AQUACER 561 is a beeswax-based wax emulsion to improve surface protection in aqueous care products and coating systems.
Request Sample AQUACER 570 Univar Solutions AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...view more AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. view less
Request Sample AQUACER 581 BYK AQUACER 581 is a wax emulsion based on carnauba wax for aqueous paper coatings to improve surface slip, scratch-resistance, uniformity of printing ink acceptance, and ink setoff. Anti-caking additive for thermoplastics and hotmelts.
Request Sample AQUACER 582 BYK AQUACER 582 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous seed coatings.
Request Sample AQUACER 597 BYK AQUACER 597 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting.
Request Sample AQUACER® 1547 BYK AQUACER® 1547 is a wax emulsion for improving surface properties of water-borne can coatings. It is an anionic emulsion of an oxidized HD polyethylene wax. This product improves scratch resistance.
Request Sample AQUACER® 507 BYK AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhan...view more AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhances hardness and slip, and reduces short wave defects (mottling, Bénard cells). view less
Request Sample AQUACER® 513 BYK AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...view more AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. view less
Request Sample AQUACER® 526 BYK AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves ...view more AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves orientation of effect pigments (aluminum, mica, etc.), reduces short wave defects (mottling, Bénard cells), and there is no negative influence on chemical resistance. view less
Request Sample AQUACER® 531 BYK AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...view more AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. view less
Request Sample AQUACER® 533 BYK AQUACER® 533 is a wax emulsion on the basis of modified paraffin for aqueous systems to improve surface slip, anti-blocking, and water-resistance. It is typically used in architectural coatings and in the printing inks industry.
Request Sample AQUACER® 537 BYK AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking...view more AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking and slip. view less
Request Sample AQUACER® 539 BYK AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti b...view more AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti blocking, scratch resistance, rub resistance and soft feel effect. view less
Request Sample AQUACER® 552 BYK AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems.
Request Sample AQUACER® 593 BYK AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and prin...view more AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and printing inks. view less
Request Sample AQUACER® 840 BYK AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, impro...view more AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, improves orientation of effect pigments and reduces short wave defects. view less
Request Sample AQUAMAT® 208 BYK AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scrat...view more AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance and soft feel effect. view less
Request Sample AQUAMAT® 263 BYK AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...view more AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. view less
Request Sample AQUAMAT® 272 BYK AQUAMAT® 272 is a matting aqueous wax dispersion for improving surface properties of water-borne systems. This product exhibits the following special features and benefits: Improved surface hardness, higher abrasion resistance, better scratch resistance, ...view more AQUAMAT® 272 is a matting aqueous wax dispersion for improving surface properties of water-borne systems. This product exhibits the following special features and benefits: Improved surface hardness, higher abrasion resistance, better scratch resistance, matting properties, and easy handling and incorporation. view less
Request Sample AQUATIX® 8421 BYK AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: impr...view more AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: improves effect pigment orientation, reduces cloudiness /mottling, shows less sensivity to co-solvents in coating systems compared to PU based thickeners, is “ready to use”, provides easy handling and incorporation compared to clays or acrylic thickeners, and excellent anti-settling properties in coatings during storage and application. view less
AquaBead® 270E Micro Powders, Inc. AquaBead® 270E is an anionic paraffin/polyethylene wax emulsion ideal for water repellency and weather/moisture resistance.
AquaBead® 325E Micro Powders, Inc. AquaBead® 325E is a high solids anionic paraffin wax emulsion that provides water repellency and moisture barrier properties.
AquaBead® 425E Micro Powders, Inc. AquaBead® 425E is an anionic carnauba wax emulsion that provides water beading with weather resistance, slip, block and mar resistance.
AquaBead® 519 Micro Powders, Inc. AquaBead® 519 is a specially formulated wax composite that provides immediate water repellency and weather resistance.
AquaBead® 525E Micro Powders, Inc. AquaBead® 525E is an anionic paraffin/carnauba wax emulsion ideal for water repellency and weather/moisture resistance.
AquaBead® 525E-AM Micro Powders, Inc. AquaBead® 525E-AM is an anionic paraffin/carnauba wax emulsion ideal for water repellency and weather/moisture resistance.
AquaBead® 916 Micro Powders, Inc. AquaBead® 916 is a specially formulated wax composite that provides immediate water beading and long-lasting water repellency and weather resistance.
AquaKlean 402 Micro Powders, Inc. AquaKlean 402 is an anionic/nonionic aqueous wax emulsion with a viscosity of 500 cPs specifically formulated for architectural interior paints and exterior stains, sealers, paints and coatings. It provides excellent scrub-ability and burnish resistance...view more AquaKlean 402 is an anionic/nonionic aqueous wax emulsion with a viscosity of 500 cPs specifically formulated for architectural interior paints and exterior stains, sealers, paints and coatings. It provides excellent scrub-ability and burnish resistance as well as initial and long lasting water beadings, weather and moisture resistance. view less
AquaKlean 403 Micro Powders, Inc. AquaKlean 403 is an anionic/nonionic aqueous wax emulsion with a viscosity of 100 cPs specifically formulated for architectural interior paints and exterior stains, sealers, paints and coatings. It provides excellent scrub-ability and burnish resistance ...view more AquaKlean 403 is an anionic/nonionic aqueous wax emulsion with a viscosity of 100 cPs specifically formulated for architectural interior paints and exterior stains, sealers, paints and coatings. It provides excellent scrub-ability and burnish resistance as well as initial and long lasting water beadings, weather and moisture resistance. view less
AquaMatte® 22 Micro Powders, Inc. AquaMatte® 22 is an ultrafine grade of micronized oxidized polyethylene for gloss reduction of paints and industrial coatings. Also useful as an additive in seed coatings.
AquaMatte® 26HD Micro Powders, Inc. AquaMatte® 26HD is a very fine grade of densified oxidized polyethylene for gloss reduction and optimum stability in water based paints and coatings
AquaMatte® 31 Micro Powders, Inc. AquaMatte® 31 is a fine micronized oxidized polyethylene for gloss reduction of paints and industrial coatings. Also useful as an additive in seed coatings.
AquaPoly 215 Micro Powders, Inc. AquaPoly 215 is a micronized oxidized polyethylene for rub resistance and slip in aqueous systems
AquaPoly 250 Micro Powders, Inc. AquaPoly 250 is a unique micronized polyethylene wax blend for maximum rub and scratch resistance with improved slip in aqueous systems.
AquaPolyfluo 411 Micro Powders, Inc. AquaPolyfluo 411 is a unique micronized oxidized polyethylene/PTFE wax composite for improved scuff and mar resistance in aqueous systems.
AquaPolysilk 19 Micro Powders, Inc. AquaPolysilk 19 is a unique micronized polyethylene wax composite for lubricity with abrasion and heat resistance in aqueous systems.
AquaSuperslip 6550 Micro Powders, Inc. AquaSuperslip 6550 is a unique micronized polyethylene/amide wax composite that provides lubricity with a smooth surface feel in aqueous systems.
AquaSynfluo 176VF Micro Powders, Inc. AquaSynfluo 176VF is a micronized oxidized wax blend that provides abrasion resistance and lubricity in aqueous systems.
AquaTex® 100 Micro Powders, Inc. AquaTex® 100 is a medium particle size grade of oxidized polyethylene for adding texture to paints and coatings. It has a maximum particle size of 149μm (100 mesh).
AquaTex® 140 Micro Powders, Inc. AquaTex® 140 is a medium particle size grade of oxidized polyethylene for adding texture to paints and coatings. It has a maximum particle size of 105μm (140 mesh).
AquaTex® 200 Micro Powders, Inc. AquaTex® 200 is a medium particle size grade of oxidized polyethylene for adding texture to paints and coatings. It has a maximum particle size of 74μm (200 mesh).
AquaTex® 230 Micro Powders, Inc. AquaTex® 230 is a fine particle size grade of oxidized polyethylene for reducing gloss and adding surface texture. It has a max particle size of 63μm (230 mesh).
AquaTex® 270 Micro Powders, Inc. AquaTex® 270 is a fine particle size grade of oxidized polyethylene for reducing gloss and adding surface texture. It has a max particle size of 53μm (270 mesh).
AquaTex® 325 Micro Powders, Inc. AquaTex® 325 is a fine particle size grade of oxidized polyethylene for reducing gloss and adding surface texture. It has a max particle size of 44μm (325 mesh).
Aquaslip™ 678 Lubrizol Advanced Materials, Inc. Aquaslip™ 678 is a wax emulsion for water based decorative and industrial coatings. The usage of Aquaslip 678 can improve the water beading properties of the coating. In addition Aquaslip 678 improves slip and anti-blocking in most aqueous points and coat...view more Aquaslip™ 678 is a wax emulsion for water based decorative and industrial coatings. The usage of Aquaslip 678 can improve the water beading properties of the coating. In addition Aquaslip 678 improves slip and anti-blocking in most aqueous points and coatings, with minimal effect on gloss or recoatability. view less
Aquaslip™ 682 Lubrizol Advanced Materials, Inc. Aquaslip™ 682 is a fine particle size wax emulsion intended for surface protection in aqueous coatings and inks. Aquaslip 682 provides excellent scratch and abrasion resistance.
Aquawax 214 Micro Powders, Inc. Aquawax 214 is an oxidized Fischer-Tropsch wax for rub resistance and improved surface slip. It has a maximum particle size of 31 μm.