UL Prospector

Success!

Successfully saved your search
241 Results
Benox® A-70 UNITED INITIATORS GMBH & CO KG Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...view more Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-70 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. view less
Benox® A-75 UNITED INITIATORS GMBH & CO KG Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...view more Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-75 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. view less
Benox® A-80 UNITED INITIATORS GMBH & CO KG Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...view more Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-80 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. view less
Benox® B-50 UNITED INITIATORS GMBH & CO KG Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent...view more Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B-50 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less
Benox® B50-106 UNITED INITIATORS GMBH & CO KG Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...view more Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less
Benox® B50-210 UNITED INITIATORS GMBH & CO KG Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...view more Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less
Benox® B50-230 UNITED INITIATORS GMBH & CO KG Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...view more Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less
Benox® B50-513 UNITED INITIATORS GMBH & CO KG Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...view more Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less
Benox® B50-713 UNITED INITIATORS GMBH & CO KG Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...view more Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less
Benox® B55 UNITED INITIATORS GMBH & CO KG Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...view more Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less
Benox® B55-107 UNITED INITIATORS GMBH & CO KG Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...view more Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less
Benox® B55-108 UNITED INITIATORS GMBH & CO KG Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...view more Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less
Benox® C-50S UNITED INITIATORS GMBH & CO KG Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in bot...view more Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in both ambient temperature and elevated temperature cure processes, in combination with amine accelerators. Benox® C-50S dissolves fast in acrylic resins and unsaturated polyester and is easy to disperse. view less
Benox® L-40LV UNITED INITIATORS GMBH & CO KG Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure...view more Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure of road marking paints based on acrylic resins. view less
Benox® L-50E UNITED INITIATORS GMBH & CO KG Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical form...view more Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical forms of dibenzoyl peroxide (provided the water content and plasticizer are not objectionable. Benox® L-50E is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, unsaturated polyester/vinyl ester resins, and copolymers of these resins. It can also be used in two-part adhesive systems, based on methacrylate or polyester resins, where the creamy consistency allows uniform mixing of the components. view less
Benzophenone Chongqing Changfeng Chemical Co., Ltd. Benzophenone is a white to whitish crystal or flake with a light odor. It is a photo-initiator and can be used in UV-curing applications such as inks and clear coatings.
CF19-2615 NuSil Silicone Technology 1 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...view more CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. view less
CN371 Sartomer Americas CN-371 is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced ...view more CN-371 is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. Suggested applications for CN-371 are metal, paper and plastic coatings, litho, offset and silk screen inks. view less
CN373 Sartomer Americas CN373 is a reactive amine coinitiator that can be used in combination with a hydrogen abstracting photoinitiator, such as benzophenone or isopropyl thioxanthone (ITX), to promote free radical polymerization. CN373 accelerates surface cure speed and helps ...view more CN373 is a reactive amine coinitiator that can be used in combination with a hydrogen abstracting photoinitiator, such as benzophenone or isopropyl thioxanthone (ITX), to promote free radical polymerization. CN373 accelerates surface cure speed and helps overcome oxygen inhibition in UV curable coatings and inks. view less
CN386US Sartomer Americas CN386US is a monofunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odor, both at press side and in the cured film, and reduce...view more CN386US is a monofunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odor, both at press side and in the cured film, and reduced blooming. view less
Doublecure® 107 Double Bond Chemical Ind., Co., Ltd. Doublecure® 107 is a Norrish-type Ι photoinitiator specially designed for the pigmented UV curing system. Since its introduction to market, this photoinitiator has rapidly gained its popularity in the application of UV ink and solder mask. Doublecure® 107...view more Doublecure® 107 is a Norrish-type Ι photoinitiator specially designed for the pigmented UV curing system. Since its introduction to market, this photoinitiator has rapidly gained its popularity in the application of UV ink and solder mask. Doublecure® 107, when irradiating with UV light, undergoes a homolytic and intramolecular type of breakage to generate a pair of free radicals to initiate the polymerization of UV curable systems. This white crystalline powder is strongly recommended for the pigmented UV system due to its strong absorbance (ε= 18,600 at 305 nm) in the wavelength region usually blocked by the commonly used pigments, such as TiO2 and phthalocyanine. Doublecure® 107 will not cause yellowing problems under normal conditions. view less
Doublecure® 1130 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1130 is a cationic photoinitiator based on Iodonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is idea...view more Doublecure® 1130 is a cationic photoinitiator based on Iodonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper. This product is a white powder with a faint odor. view less
Doublecure® 115 Double Bond Chemical Ind., Co., Ltd. Doublecure® 115 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this product is used in combination with other photoinitiators an increase in cur...view more Doublecure® 115 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this product is used in combination with other photoinitiators an increase in cured speed, especially at the surface, can be observed, Besides the improved stability, other advantages of Doublecure® 115 are including light color, low viscosity and low volatility. Formulated UV/EB curable products containing Doublecure® 115 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. This product is a clear yellowish liquid with a slight amine smell. view less
Doublecure® 1172 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1172 is a cationic photoinitiator based on sulphonium chemistry. No detectable benzene is generated when it is utilized to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. This product i...view more Doublecure® 1172 is a cationic photoinitiator based on sulphonium chemistry. No detectable benzene is generated when it is utilized to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. This product is compatible with most cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper. It appears as a light yellow liquid with a very faint odor. view less
Doublecure® 1176 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1176 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. It is compatible with most UV cationic UV systems an...view more Doublecure® 1176 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. It is compatible with most UV cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper substrates. This yellow liquid exhibits a very faint odor. view less
Doublecure® 1190 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1190 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is id...view more Doublecure® 1190 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper. This product is a clear yellow to amber liquid. view less
Doublecure® 1256 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1256 is a non-yellowing liquid photoinitiator designed specifically for unsaturated polyesters or thick acrylic UV coatings. It has a minor λmax located in 374 nm, and therefore, it is also ideal for white-pigmented systems. Basically, a perce...view more Doublecure® 1256 is a non-yellowing liquid photoinitiator designed specifically for unsaturated polyesters or thick acrylic UV coatings. It has a minor λmax located in 374 nm, and therefore, it is also ideal for white-pigmented systems. Basically, a percentage of 1 – 3 % of Doublecure® 1256 is effective for lacquer preparation. If the resin is made of polyester, there is no need for coinitiators. However, due to its sensitivity toward oxygen inhibition, additional coinitiators such as Doublecure® 184 or 173 is highly recommended for pigmented acrylic finishes. If the yellowing is not concerned, amine synergist such as Doublecure® EPD or 115,225 is also beneficial to the throughcure. Owing to its absorption of light in the long wave UV region, Doublecure® 1256 and lacquers produced from it are daylight-sensitive. Therefore, light with wavelength less than 500 nm must be excluded during storage and processing. view less
Doublecure® 173 Double Bond Chemical Ind., Co., Ltd. Doublecure® 173 is a liquid-type non-yellowing photoinitiator. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. Doublecure® 173, w...view more Doublecure® 173 is a liquid-type non-yellowing photoinitiator. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. Doublecure® 173, when irradiating with UV light, undergoes a homolytic and intramolecular type of breakage to generate a pair of free radicals to initiate the olymerization of UV curable systems. It does not require hydrogen donor to initiate its radicals. However its radicals are very sensitive to oxygen in the air. This product is a light yellow to clear liquid. view less
Doublecure® 1819 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1819 is a photoinitiator for polymerization of unsaturated resins upon UV light exposure. It is suggested to be used in white pigmented formulations, the curing of glass fiber reinforced polyester/styrene systems, and for clearcoats of outdoor...view more Doublecure® 1819 is a photoinitiator for polymerization of unsaturated resins upon UV light exposure. It is suggested to be used in white pigmented formulations, the curing of glass fiber reinforced polyester/styrene systems, and for clearcoats of outdoor use in combinations with light stabilizers. With low concentrations of this white-yellowish powder, it can reach an excellent curing performance in highly opaque white and colored furniture coatings or screen inks containing titanium dioxide or colored pigments, and presents minimum yellowing after exposure to sufficient amounts of UV radiation. In addition, it allows curing of thick sections due to the outstanding absorption. view less
Doublecure® 1819DW Double Bond Chemical Ind., Co., Ltd. Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a d...view more Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a dispersion of Bis-Acyl-Phosphine Oxide in water. This white to slightly yellow liquid can be used in combinations with other photoinitiators such as Doublecure® 173. It can be used in UV curable formulations for clear or pigmented coatings on wood, metal, plastic, paper as well as for printing inks. In addition, it allows curing of thick sections due to the outstanding absorption. view less
Doublecure® 184 Double Bond Chemical Ind., Co., Ltd. Doublecure® 184 is used for the application on non-yellowing UV Radiation Curing Systems. It is an alpha cleavage type photoinitiator, which combines the characteristics of high photospeed and exceptional storage life. Its non-yellowing and low-irritating...view more Doublecure® 184 is used for the application on non-yellowing UV Radiation Curing Systems. It is an alpha cleavage type photoinitiator, which combines the characteristics of high photospeed and exceptional storage life. Its non-yellowing and low-irritating properties, makes it an ideal choice for clear coatings on paper, flooring, metal, plastics and wood. Doublecure® 184, when irradiating with UV light, undergoes a homolytic and intramolecular type of breakage to generate a pair of free radicals to initiate the polymerization of UV curable systems. It does not require hydrogen donor to initiate its radicals. However, its radicals are very sensitive to oxygen in the air. Doublecure® 184 is strongly recommended when non-yellowing properties are crucial. Results obtained from an outdoor exposure study show that it gives better long-term non-yellowing performance than other initiators. Furthermore, it exhibits lower sensitivity to air inhibition than Doublecure® 173 during curing. view less
Doublecure® 2-ITX Double Bond Chemical Ind., Co., Ltd. Doublecure® 2-ITX is an ideal photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivators such as Doublecure® EPD should yield satisfying results for most of UV applications. The usage rates vary according to the compos...view more Doublecure® 2-ITX is an ideal photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivators such as Doublecure® EPD should yield satisfying results for most of UV applications. The usage rates vary according to the composition of the system, source of light, line speed, and film thickness but usually lie between 0.25 % to 3 % w/w together with photoactivators at 2 - 5 % w/w. Applications include printing ink, decorative coating for metal cans, solder mask, and pressure sensitive sheet. view less
Doublecure® 200 Double Bond Chemical Ind., Co., Ltd. Doublecure® 200 is a liquid-type non-yellowing photosensitizer. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives where non-yellowin...view more Doublecure® 200 is a liquid-type non-yellowing photosensitizer. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives where non-yellowing properties are important. This product, when irradiating with UV light, undergoes both of a homolytic and intramolecular type of breakage to generate a pair of free radicals and a bimolecular hydrogen abstraction reaction to initiate the polymerization of UV curable systems. Its photospeed acting as a photoinitiator is not as fast as Doublecure® 173 for example, but it gives better non-yellowing performance and better surface curing. This product is a light yellow and clear liquid. view less
Doublecure® 225 Double Bond Chemical Ind., Co., Ltd. Doublecure® 225 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this yellow liquid is used in combination with other photoinitiators, an increase...view more Doublecure® 225 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this yellow liquid is used in combination with other photoinitiators, an increase in cured speed, especially at the surface, can be observed. Other advantages include light color, low viscosity, improved stability and low volatility. view less
Doublecure® 369 Double Bond Chemical Ind., Co., Ltd. Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in com...view more Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in combination with suitable coinitiators, e.g., Doublecure® 184, for UV curable inks and varnishes for applications on paper, metal and plastic materials. Its high absorptivity makes it especially suitable for pigmented UV-curable systems, photo resists and printing plates. view less
Doublecure® 3959 Double Bond Chemical Ind., Co., Ltd. Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white p...view more Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white powder is especially suited to applications where a low odor is desired, and for use in water-borne systems based on acrylate or unsaturated polyester resins. It is mainly used in UV curable formulation on substrates of wood, metal, plastic and paper. view less
Doublecure® 550 Double Bond Chemical Ind., Co., Ltd. Doublecure® 550 is a liquid mixture of two photoinitiators, Doublecure® 184 and Doublecure® BP. It is used to initiate the photo polymerization of chemically oligomers e.g. a variety of acrylates, in combination with mono- or multifunctional monomers. The...view more Doublecure® 550 is a liquid mixture of two photoinitiators, Doublecure® 184 and Doublecure® BP. It is used to initiate the photo polymerization of chemically oligomers e.g. a variety of acrylates, in combination with mono- or multifunctional monomers. The liquid nature of this product makes it an ideal choice for clear coatings on paper, flooring, metal, plastics, woods and especially in water-based UV coating systems. This product is a light yellow liquid with a very faint odor. view less
Doublecure® 575 Double Bond Chemical Ind., Co., Ltd. Doublecure® 575 is a liquid-type non-yellowing photosensitizer. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives where non-yellowing properties are important. This product can be used for printing ink, ove...view more Doublecure® 575 is a liquid-type non-yellowing photosensitizer. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives where non-yellowing properties are important. This product can be used for printing ink, overprint vanishes, wood lacquers, putties and fillers for particle board and chipboard, and adhesive. view less
Doublecure® 645 Double Bond Chemical Ind., Co., Ltd. Doublecure® 645 is a special tertiary amine acrylate monomer, and is particularly well suited for high gloss UV curable varnishes on paper and board. It also provides very fast surface curing to overcome the oxygen-inhibited problem when in combination wi...view more Doublecure® 645 is a special tertiary amine acrylate monomer, and is particularly well suited for high gloss UV curable varnishes on paper and board. It also provides very fast surface curing to overcome the oxygen-inhibited problem when in combination with Benzophenone. This product is a light yellow liquid. The haze or gloss loss resulting from the migration of the common tertiary amine can be improved by use of Doublecure® 645. view less
Doublecure® 73W Double Bond Chemical Ind., Co., Ltd. Doublecure® 73W is a water soluble non-yellowing photoinitiator. Such proprieties make it ideal for making photoinitiator blends or water borne UV curing. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. ...view more Doublecure® 73W is a water soluble non-yellowing photoinitiator. Such proprieties make it ideal for making photoinitiator blends or water borne UV curing. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. It is the first water solute able initiator to be used for non-yellowing clear coating. And because it is in liquid type and has good solvency properties, it is easier to handle and formulate. This yellowish to brown clear liquid is used to initiate polymerization of systems based on unsaturated acrylic monomers as reactive diluents. view less
Doublecure® 784 Double Bond Chemical Ind., Co., Ltd. Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in com...view more Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in combination with suitable coinitiators, e.g., Doublecure® 184, for UV curable inks and varnishes for applications on paper, metal and plastic materials. Its high absorptivity makes it especially suitable for pigmented UV-curable systems, photo resists and printing plates. view less
Doublecure® BDK Double Bond Chemical Ind., Co., Ltd. Doublecure® BDK is a highly efficient photoinitiator where inherent yellowing is not important. High photospeed combined with improved shelf life helps make it the initiator of choice for many applications, including coating on wood, metal and plastic as ...view more Doublecure® BDK is a highly efficient photoinitiator where inherent yellowing is not important. High photospeed combined with improved shelf life helps make it the initiator of choice for many applications, including coating on wood, metal and plastic as well as photo-resistant dry film. Doublecure® BDK, when irradiating with UV light , undergoes a homolytic and intramolecular type of breakage to generate a pair of free radicals to initiate the polymerization of UV curable systems. It does not require hydrogen donor to initiate its radicals. However, its radicals are very sensitive to oxygen in the air. Because its polymerization end products contain quinone type of compounds which result in the yellowing effect, its application has been limited. It is usually used to initiate polymerization of systems based on unsaturated acrylic monomers as reactive diluents. view less
Doublecure® BMS Double Bond Chemical Ind., Co., Ltd. Doublecure® BMS is a highly efficient photoinitiator which is used, normally in combination with a photoactivator such as Doublecure® EPD in the formulation of coating cured by UV radiation. Its white color appearance and strong absorption in UVB region m...view more Doublecure® BMS is a highly efficient photoinitiator which is used, normally in combination with a photoactivator such as Doublecure® EPD in the formulation of coating cured by UV radiation. Its white color appearance and strong absorption in UVB region make it suitable for white or pigmented UV coating. Low odor and good solubility in monomer are two advantages over other sensitizers bearing the same absorption pattern. This product appears as a silver white crystal with a very faint odor. view less
Doublecure® BP Double Bond Chemical Ind., Co., Ltd. Doublecure® BP is an efficient photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115, generates free radicals which can initiate polymerization of UV radiation curing systems. This product appears as a...view more Doublecure® BP is an efficient photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115, generates free radicals which can initiate polymerization of UV radiation curing systems. This product appears as a white to light yellow crystal or flake. view less
Doublecure® CA Double Bond Chemical Ind., Co., Ltd. Doublecure® CA is a solid, non-yellowing photoititiator synergist. It provides fast surface curing, outstanding surface hardness, and odorless characteristics. This white to yellowish powder is characterized as a chlorendic ester.
Doublecure® CQ Double Bond Chemical Ind., Co., Ltd. Doublecure® CQ is a solid, non-yellowing photoititiator. It provides fast through curing. This yellow crystalline powder is characterized as a quinone derivative.
Doublecure® EMK Double Bond Chemical Ind., Co., Ltd. Doublecure® EMK is both an aromatic ketone and a tertiary amine. It could act both as a photosensitizer and an amine synergist and would be expected to be an independent complete initiating system. Doublecure® EMK has a strong absorption between 350 to 40...view more Doublecure® EMK is both an aromatic ketone and a tertiary amine. It could act both as a photosensitizer and an amine synergist and would be expected to be an independent complete initiating system. Doublecure® EMK has a strong absorption between 350 to 400 nm which makes it most suitable for pigmented and black UV coating. This product is is a photo-grade EMK which bears bright yellow color and is more resistant to oxidation by exposure in air than the most commercially available EMK. view less
Doublecure® EPD Double Bond Chemical Ind., Co., Ltd. Doublecure® EPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure ® ITX and MP-L....view more Doublecure® EPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure ® ITX and MP-L. Doublecure® EPD can be used for printing ink, decorative coatings for metal cans and food cartons, adhesive, sealant, pressure transfer sheets, photoresist dry film and metal primers. This product is a white crystalline powder with a slight acetic acid smell. view less
Doublecure® IPK Double Bond Chemical Ind., Co., Ltd. Doublecure® IPK is an efficient photo sensitizer that is generally used with a photo-initiator to cure coatings that are polymerized by ultraviolet radiation. Photo-initiators that are commonly used in conjunction with it include Doublecure® 107, OMB and ...view more Doublecure® IPK is an efficient photo sensitizer that is generally used with a photo-initiator to cure coatings that are polymerized by ultraviolet radiation. Photo-initiators that are commonly used in conjunction with it include Doublecure® 107, OMB and MP-L. This product is a clear liquid with a slight acetic acid smell. It used in conjunction with a photoinitiator converted by energy transfer into free radicals, which can initiate photopolymerization of suitable resin formulations. view less
Doublecure® LBP Double Bond Chemical Ind., Co., Ltd. Doublecure® LBP is an efficient liquid photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115 and 225 generates free radicals, which can initiate polymerization of UV radiation curing systems.
Doublecure® LED385 Double Bond Chemical Ind., Co., Ltd. Doublecure® LED385 is a photoinitiator specially designed for LED ink application at 385nm wavelength. Compared to TPO or 819, a lower dosage of Doublecure® LED385 can achieve better surface cure and solvent resistance.
Doublecure® OMB Double Bond Chemical Ind., Co., Ltd. Doublecure® OMB is an efficient photoinitiator specially designed for application where odorless and non-yellowing properties are required. Its use in combination with a photoactivator such as Doublecure® 115 should yield comparable results to other benzo...view more Doublecure® OMB is an efficient photoinitiator specially designed for application where odorless and non-yellowing properties are required. Its use in combination with a photoactivator such as Doublecure® 115 should yield comparable results to other benzophenone type initiators. This white to off-white crystalline powder is an efficient photosensitizer with low odor characteristics, which makes it eminently suitable for food packaging printing inks. In addition it can be used to promote good surface cure characteristics without inducing yellowing, which is prerequisite for high –valued clear overprint varnishes and wood lacquers for indoor use. view less
Doublecure® OPD Double Bond Chemical Ind., Co., Ltd. Doublecure® OPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure® ITX and EMK. T...view more Doublecure® OPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure® ITX and EMK. This product is a pale yellow liquid with a faintly amine odor. Doublecure® OPD is a widely utilized photoactivator, which used in conjunction with a photosensitizer is converted by energy transfer into free radicals. This action can initiate photopolymerization of suitable resin formulations. view less
Doublecure® PI-172 Double Bond Chemical Ind., Co., Ltd. Doublecure® PI-172 is a highly efficient polymerization inhibitor for acrylate monomers, methacrylate monomers, acrylic acid, acrylonitrile, styrene monomers and butadienes. This product is an orange crystalline powder.
Doublecure® TPO Double Bond Chemical Ind., Co., Ltd. Doublecure® TPO is a photo initiator for UV coatings. Since it has a minor λmax located in 379 nm, it can be used for pigmented systems without sacrificing activity. Also due to its unprecedented speed and non-yellowing properties, it is the best recommen...view more Doublecure® TPO is a photo initiator for UV coatings. Since it has a minor λmax located in 379 nm, it can be used for pigmented systems without sacrificing activity. Also due to its unprecedented speed and non-yellowing properties, it is the best recommendation for thick film and white pigmented coating. This product is a yellow crystalline powder. Basically, a percentage of 1 – 3 % of Doublecure® TPO is effective for lacquer preparation. If the resin is made of polyester, there is no need for co-initiators. However, due to its sensitivity toward oxygen inhibition, additional co-initiators such as Doublecure® 184 or 173 is highly recommended for pigmented acrylic finishes. If the yellowing is not concerned, amine synergist such as Doublecure® EPD or P-115 is also beneficial to the throughcure. view less
Doublecure® TPO-L Double Bond Chemical Ind., Co., Ltd. Doublecure® TPO-L is a photoinitiator for UV coatings. Since it has a minor λmax located in 379 nm, it can be used for pigmented systems without sacrificing activity. Also due to its unprecedented speed and non-yellowing properties, it is the best recomme...view more Doublecure® TPO-L is a photoinitiator for UV coatings. Since it has a minor λmax located in 379 nm, it can be used for pigmented systems without sacrificing activity. Also due to its unprecedented speed and non-yellowing properties, it is the best recommendation for thick film and white pigmented coating. Basically, a percentage of 1 – 3 % of Doublecure® TPO-L is effective for lacquer preparation. If the resin is made of polyester, there is no need for coinitiators. However, due to its sensitivity toward oxygen inhibition, additional coinitiators such as Doublecure® 184 or 173 is highly recommended for pigmented acrylic finishes. If the yellowing is not concerned, amine synergist such as Doublecure® EPD or P-115 is also beneficicial to the throughcure. Owing to its absorption of light in the long wave UV region, Doublecure® TPO-L and lacquers produced from it are daylight-sensitive. Therefore, light with wavelengths less than 500 nm must be excluded during storage and processing. view less
EBECRYL® P104 Allnex EBECRYL® P104 is an acrylated amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P104 provides rapid UV cure ...view more EBECRYL® P104 is an acrylated amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P104 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P104 is recommended as a reactive co-initiator in the following applications: overprint varnishes, screen and flexo inks, wood topcoats, clear coatings on paper and plastics, and pigmented coatings. view less Request Sample
EBECRYL® P115 Allnex EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV ...view more EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 is recommended as a reactive co-initiator in the following applications: overprint varnishes, screen and flexo inks, wood topcoats, clear coatings on paper and plastics, and pigmented coatings. view less Request Sample
EBECRYL® P39 Allnex EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV c...view more EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. It has recommended levels are from 8 to 10% based on total formulation. It should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100. EBECRYL® P39 is recommended for use in over print varnishes where low residual odor is required. view less Request Sample
GENOCURE* BAPO Rahn USA Corp. GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due...view more GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* BAPO shows excellent through cure in pigmented systems. view less Request Sample
GENOCURE* BDK Rahn USA Corp. GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset in...view more GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates. view less Request Sample
GENOCURE* BDMM Rahn USA Corp. GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is...view more GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is typically used in concentrations from 0.5 to 4%. In printing inks it is often used in combination with thioxantones, aminobenzoates, benzophenones, GENOCURE* PMP, CPK and BDK. view less Request Sample
GENOCURE* BMS Rahn USA Corp. GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented ...view more GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented systems. view less Request Sample
GENOCURE* BP Rahn USA Corp. GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent fo...view more GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent for photoinitiator cocktails. This product is typically applied in plastic varnishes, printing inks and varnishes and wood and industrial coatings. view less Request Sample
GENOCURE* CPK Rahn USA Corp. GENOCURE* CPK is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* CPK is especially recommended when UV-coatings are required to exhibit only minimal yellowing even after prolonged exposure to sunlight. Request Sample
GENOCURE* CQ Rahn USA Corp. GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental compos...view more GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental composites, visible light curing adhesives and pigmented systems. view less Request Sample
GENOCURE* DEAP Rahn USA Corp. GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coa...view more GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coatings, laminating adhesives, printing inks and varnishes for plastic foils, and wood, plastic, and paper coatings. view less Request Sample
GENOCURE* DETX Rahn USA Corp. GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress ink...view more GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. view less Request Sample
GENOCURE* DMHA Rahn USA Corp. GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, pl...view more GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, plastic coatings, water dilutable coatings, clear coatings and pigmented coatings . view less Request Sample
GENOCURE* EHA Rahn USA Corp. GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This pr...view more GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product can be applied in offset inks and varnishes letterpress inks, screen inks and varnishes, flexo inks and varnishes and industrial coatings and adhesives. view less Request Sample
GENOCURE* EPD Rahn USA Corp. GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is ...view more GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is typically used in offset inks, letterpress inks, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives and photo polymers and printing plates. view less Request Sample
GENOCURE* FMP Rahn USA Corp. GENOCURE* FMP is an Aromatic ketone, Norrish Type I photoinitiator for UV curable inks, coatings and adhesives. GENOCURE* FMP is not classified as a CMR substance and it can be used as an alternative to CMR1-classified photoinitiators such as GENOCURE* PM...view more GENOCURE* FMP is an Aromatic ketone, Norrish Type I photoinitiator for UV curable inks, coatings and adhesives. GENOCURE* FMP is not classified as a CMR substance and it can be used as an alternative to CMR1-classified photoinitiators such as GENOCURE* PMP and GENOCURE* BDMM. view less Request Sample
GENOCURE* ITX Rahn USA Corp. GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks...view more GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. view less Request Sample
GENOCURE* LBC Rahn USA Corp. GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied i...view more GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied in paper varnishes, metal varnishes, plastic coatings and water dilutable coatings. view less Request Sample
GENOCURE* LBP Rahn USA Corp. GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and boa...view more GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and board varnishes, wood and industrial coatings, printing inks and varnishes and plastic varnishes. view less Request Sample
GENOCURE* LTD Rahn USA Corp. GENOCURE* LTD is a 1:1 blend of TPO/DMHA and has main features of liquid, excellent reactivity, solubility, and very good surface/through cure. This product has applications in non yellowing clear coats, white pigmented systems, and adhesives. Request Sample
GENOCURE* LTM Rahn USA Corp. GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yel...view more GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yellowing wood coatings, non yellowing coatings for plastics, non yellowing screen and decor varnishes, laminating adhesives and pressure sensitive adhesives. view less Request Sample
GENOCURE* MBB Rahn USA Corp. GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnis...view more GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnishes, plastic varnishes, wood coatings, printing inks, industrial coatings and board varnishes. view less Request Sample
GENOCURE* MBF Rahn USA Corp. GENOCURE* MBF is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* MBF is especially recommended when UV coatings are required to exhibit minimal yellowing. Request Sample
GENOCURE* MDEA Rahn USA Corp. GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress...view more GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress inks, screen inks and varnishes, paper and board varnishes and wood coatings. view less Request Sample
GENOCURE* PBZ Rahn USA Corp. GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing...view more GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing inks, wood coatings, printed circuit board and photo polymers and printing plates. view less Request Sample
GENOCURE* PMP Rahn USA Corp. GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENO...view more GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENOCURE* EHA or GENOMER* 5275 (up to 15%). This product is applied in offset inks and varnishes, glass fiber coating, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives, wood coatings and printed circuit boards. view less Request Sample
GENOCURE* TPO Rahn USA Corp. GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo in...view more GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes and letterpress inks. view less Request Sample
GENOCURE* TPO-L Rahn USA Corp. GENOCURE* TPO-L is a phosphine oxid, liquid photoinitiator for UVcurable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* TPO-L is highly effective for high film weights. It is typically applied in offset inks and varnishes, f...view more GENOCURE* TPO-L is a phosphine oxid, liquid photoinitiator for UVcurable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* TPO-L is highly effective for high film weights. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes, letterpress inks and fillers. view less Request Sample
GENOPOL* AB-2 Rahn USA Corp. GENOPOL* AP-2 is a multifunctional aminobenzoate derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for standard aminobenzoates. The hydrogen donor improve...view more GENOPOL* AP-2 is a multifunctional aminobenzoate derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for standard aminobenzoates. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxanthone and other photoinitiators. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. view less Request Sample
GENOPOL* BP-2 Rahn USA Corp. GENOPOL* BP-2 is a multifunctional benzophenone derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for benzophenone and its derivatives. During the product...view more GENOPOL* BP-2 is a multifunctional benzophenone derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for benzophenone and its derivatives. During the production process of the polymeric GENOPOL* product range, the low molecular weight substances are removed. Therefore, GENOPOL* BP-2 is very low in odor. Combined with the ability to link into the UV cured acrylate matrix, GENOPOL* BP-2 will exhibit extremely low tendency to migrate. This product can be used in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. view less Request Sample
GENOPOL* TX-2 Rahn USA Corp. GENOPOL* TX-2 is a multifunctional thioxanthone derivative for use in UV-curable inks, coatings and adhesives where low migration and low odor are required. It can be used as a replacement for ITX and other thioxanthone derivatives. During the production ...view more GENOPOL* TX-2 is a multifunctional thioxanthone derivative for use in UV-curable inks, coatings and adhesives where low migration and low odor are required. It can be used as a replacement for ITX and other thioxanthone derivatives. During the production process of the polymeric GENOPOL* product range, the low molecular weight substances are removed. Therefore, GENOPOL* TX-2 is very low in odor. Combined with the ability to link into the UV cured acrylate matrix, GENOPOL* TX-2 will exhibit extreme low tendency to migrate. This product is used in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. GENOPOL*.TX-2 should always be used in combination with GENOPOL*.AB-2. view less Request Sample
GR-1173 Hubei Gurun Technology Co., Ltd. GR-1173 is a yellowish liquid photoinitiator with high-efficiency and anti-yellowing. This product is commonly applied to overprint varnish and coatings for wood, plastics and metal.
GR-184 Hubei Gurun Technology Co., Ltd. GR-184 is a white powder with strong thermal stability and anti-yellowing photoinitiator. This product is commonly used in overprint varnish and coatings for wood, plastics and metal.
GR-369 Hubei Gurun Technology Co., Ltd. GR-369 is a yellowish powder and photoinitiator that contains quick photocuring and high sensitivity. This product has applications offset inks, screen inks, flexo inks and inkjet inks.
GR-907 Hubei Gurun Technology Co., Ltd. GR-907 is a white powder and a photoinitiator with quick photocuring speed, high sensitivity and low odor. This product can be applied to offset inks, screen inks, flexo inks and inkjet inks.
GR-FMT Hubei Gurun Technology Co., Ltd. GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV c...view more GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV coating, printing ink and adhesive. view less
GR-ITX Hubei Gurun Technology Co., Ltd. GR-ITX is a yellowish powder and photoinitiator that contains quick photocuring and photoinitiating. This product is for use in clear and colorful UV coating or ink, offset inks, screen inks, flexo inks and inkjet inks.
GR-PAG-2 Hubei Gurun Technology Co., Ltd. GR-PAG-2 is a yellow brown powder and a cationic type photoinitiator with strong thermal stability, high solubility and light controllability. This product is used in cationic photocuring and chemical acid agile amplification imagery systems.
GR-PS-1 Hubei Gurun Technology Co., Ltd. GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative pho...view more GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative photoresist and other sensitive material. view less
GR-TPO Hubei Gurun Technology Co., Ltd. GR-TPO is a yellowish powder used as a photoinitiator. This product has quick photocuring speed, can be applied to thick layers of photocuring coatings, contain low-volatility, low odor and anti-yellowing.
GR-XBPO Hubei Gurun Technology Co., Ltd. GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV...view more GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV varnish, many coatings, adhesive, offset printing ink, screen printing ink and flexo ink. view less
Hycure 1173 ChemFine International Co., Ltd. Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time.
Hycure 184 ChemFine International Co., Ltd. Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time.
Hycure 907 ChemFine International Co., Ltd. Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time.