| epsilon-Caprolactone, CLO | BASF Corporation, Chemical Intermediates | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...view more Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. view less | |
| DOUBLEMER® 013 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 013 is an acrylic monomer which has several advantages like low viscosity, low skin irritation index (PII=0.5), high reactivity and good heat resistance. When used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB), DOUBLEMER® 013 will exhibit substrate wetting and flow properties, low viscosity and good stability in formulation. Because of its acrylic functional group, after curing, this product will get into the backbone of substrates by photo free radical polymerization. Because of its chemical structure, it tend to be dissolved in water. It could replace NVP in most formulations, as well as water soluble UV application. Formulated UV/EB curable products containing DOUBLEMER® 013 may be applied as a reactivity solvent or adhesive water borne UV ...view more DOUBLEMER® 013 is an acrylic monomer which has several advantages like low viscosity, low skin irritation index (PII=0.5), high reactivity and good heat resistance. When used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB), DOUBLEMER® 013 will exhibit substrate wetting and flow properties, low viscosity and good stability in formulation. Because of its acrylic functional group, after curing, this product will get into the backbone of substrates by photo free radical polymerization. Because of its chemical structure, it tend to be dissolved in water. It could replace NVP in most formulations, as well as water soluble UV application. Formulated UV/EB curable products containing DOUBLEMER® 013 may be applied as a reactivity solvent or adhesive water borne UV formulation. This product is a clear to yellowish liquid. view less | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...view more Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. view less | |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| Bisomer® S10 W | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® S10 W (50% aqueous solution of Methoxy Polyethyleneglycol 1000 Methacrylate) is an aqueous solution of a long chain methacrylate monoester based on a poly-ethyleneglycol backbone. This product has a saponification value of 23-28mg KOH/g, a molecu...view more Bisomer® S10 W (50% aqueous solution of Methoxy Polyethyleneglycol 1000 Methacrylate) is an aqueous solution of a long chain methacrylate monoester based on a poly-ethyleneglycol backbone. This product has a saponification value of 23-28mg KOH/g, a molecular weight of 1080g/mol, and an water content of 49-51%. It is water soluble and contains approximately 23 EO units within the chain. Bisomer® S10 W is an excellent material to impart water solubility or water dispersibility within non-ionic organic molecules. Due to its low Glass Transition Temperature (Tg), it is also an excellent flexibilising molecule. It is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). This product is non-toxic and supplied as a 50% active solution in water as the undiluted product is a wax -like solid. view less | |
| SR212B | Sartomer Americas | SR212B is a low viscosity difunctional monomer offering good stain resistance and solvency. Suggested applications include: acrylics, coatings and water based coatings, and plastics. | |
| Triethylamine anhydrous | BASF Corporation, Chemical Intermediates | Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for ...view more Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for two-component paints. Triethylamine is suitable as neutralization agent in waterborne paints based on polyesters, alkyds, acrylic resins and polyurethanes containing carboxyl or other acidic groups. Due to excellent water solubility and lack of active hydrogen atoms, triethylamine is often used for the production of water-borne polyurethane dispersions. view less | |
| Triethylamine anhydrous | Univar Solutions | Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for ...view more Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for two-component paints. Triethylamine is suitable as neutralization agent in waterborne paints based on polyesters, alkyds, acrylic resins and polyurethanes containing carboxyl or other acidic groups. Due to excellent water solubility and lack of active hydrogen atoms, triethylamine is often used for the production of water-borne polyurethane dispersions. view less | Request Sample |
| VESTAMIN® A 95 | Evonik Operations GmbH, BL Crosslinkers | VESTAMIN® A 95 is an aqueous solution of a sodium salt of an amino functional sulfonic acid. It contains a primary and a secondary amino group and combines the properties of an emulsifier and a chain extender in the production of aqueous PUR dispersions. | Request Sample |
| SR512 | Sartomer Americas | SR512, 2-hydroxyethylethylene urea, reduces VOCs and increases solids levels, while maintaining film properties of solvent-based and water-borne industrial baking coatings crosslinked with amino resins. SR512 significantly improves the gloss and clarity of emulsion-based coatings, and increases the open-time of waterborne...view more SR512, 2-hydroxyethylethylene urea, reduces VOCs and increases solids levels, while maintaining film properties of solvent-based and water-borne industrial baking coatings crosslinked with amino resins. SR512 significantly improves the gloss and clarity of emulsion-based coatings, and increases the open-time of waterborne systems. Suggested applications include: adhesives; sealants, chemical intermediates, paints, plastic, metal, and wood coatings, and inks. view less | |
| RESEM Y-225 | Chukyo Yushi Co., Ltd. | RESEM Y-225 is a waterborne coating consisting of Poly Lactic Acid(PLA). The key features are Biodegradable plastic, Biopolymer, Environmetal-frendly coating, food and industrial paper packaging, contribution of circular economy, reduction of waste proble...view more RESEM Y-225 is a waterborne coating consisting of Poly Lactic Acid(PLA). The key features are Biodegradable plastic, Biopolymer, Environmetal-frendly coating, food and industrial paper packaging, contribution of circular economy, reduction of waste problems, solvent free, 100% Compostable and heat-sealable agents. This water-based coating is recommended for a wide range of coating applications to develop new products to solve environmental issues. view less | Request Sample |
| N,N-Dimethylethanol-amine Lupragen® N 101 | BASF Corporation, Chemical Intermediates | N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints...view more N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints. N,N-Dimethylethanolamine is also used as neutralization agent in paints based on water-borne polyesters, alkyds, acrylic resins and polyurethanes. view less | |
| SR511 | Sartomer Americas | SR511, 2-hydroxethylethylene urea, is a 75% solids monomer that reduces VOCs and increases solids levels, while maintaining film properties of solvent-based and water-borne i n dustrial baking coatings crosslinked with amino resins. SR511 significantly improves gloss and clarity of emulsion-based coatings, and increases the open-time of waterborne...view more SR511, 2-hydroxethylethylene urea, is a 75% solids monomer that reduces VOCs and increases solids levels, while maintaining film properties of solvent-based and water-borne i n dustrial baking coatings crosslinked with amino resins. SR511 significantly improves gloss and clarity of emulsion-based coatings, and increases the open-time of waterborne systems. Suggested applications include: adhesives; sealants, chemical intermediates, paints, plastic, metal, wood coatings, and inks. view less | |
| Bisomer® S20 W | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® S20 W is an aqueous solution of a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 45 EO units within the chain. This product has a water content of 48-52%, an inhibitor (MEHQ) ...view more Bisomer® S20 W is an aqueous solution of a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 45 EO units within the chain. This product has a water content of 48-52%, an inhibitor (MEHQ) content of 0.22-0.28%, and an acidity - methacrylic acid of 0.1% max. Bisomer® S20 W is an excellent material to impart water solubility or water dispersibility within non-ionic organic molecules. Due to its low Glass Transition Temperature (Tg), it is also an excellent flexibilising molecule. It is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). This product is non-toxic and supplied as a 50% active solution in water as the undiluted product is a wax-like solid. view less | |
| Diethanolamine, pure | BASF Corporation, Chemical Intermediates | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| TMP (Hydro)® Trimethylol-propane | BASF Corporation, Chemical Intermediates | TMP (Hydro)® Trimethylol-propane building block for alkyd resins, saturated & unsaturated polyesters, poly-urethanes, additive for waterborne paints and as backbone molecule for alkoxylation. Trimethylolpropane is the most common polyol for different typ...view more TMP (Hydro)® Trimethylol-propane building block for alkyd resins, saturated & unsaturated polyesters, poly-urethanes, additive for waterborne paints and as backbone molecule for alkoxylation. Trimethylolpropane is the most common polyol for different types of alkyds and branched polyesters, it is easily esterified or transest. Alkyds and polyesters based on trimethylol-propane are suitable for solventborne paints (stoving enamels, two-component paints, can- & coil coating) and for waterborne paints. view less | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...view more Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). view less | |
| RESEM W-990 | Chukyo Yushi Co., Ltd. | RESEM W-990 is a waterborne coating consisting of Poly Lactic Acid(PLA). The key features are biodegradable plastic, biopolymer, environmentally-friendly coating, 50% solid content, solvent free, 100% compostable, and heatsealable. This product offers exc...view more RESEM W-990 is a waterborne coating consisting of Poly Lactic Acid(PLA). The key features are biodegradable plastic, biopolymer, environmentally-friendly coating, 50% solid content, solvent free, 100% compostable, and heatsealable. This product offers excellent adhesion strength for food and industrial paper packages as heatsealable agents and can be used for various coating applications. We expect that this water-based product contributes to reduce waste problems and be a part of circular economy by means of the bio-degradation and our emulsion technologies. view less | Request Sample |
| Duranate™ TUL-100 Hexamethylene Diisocyanate (HDI) Based Polyiscyanate | Kowa American Corporation | Duranate™ TUL-100 is an ultra-low viscosity HDI based polyisocyanate. In fact, TUL-100 is the lowest viscosity trimer HDI available in the industry. TUL-100 is used in high solids & waterborne formulations & provides excellent gel fraction, hardness and ...view more Duranate™ TUL-100 is an ultra-low viscosity HDI based polyisocyanate. In fact, TUL-100 is the lowest viscosity trimer HDI available in the industry. TUL-100 is used in high solids & waterborne formulations & provides excellent gel fraction, hardness and weatherability for the automotive, architectural, industrial and other similar market segments. view less | Request Sample |
| N,N-Diethylethanol-amine | BASF Corporation, Chemical Intermediates | N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethy...view more N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes. N,N-Diethylethanolamine offers an optimal compatibility with resins and film matrix. N,N-Diethylethanolamine supports the flow and leveling during film forming. view less | |
| N,N-Diethylethanol-amine | Univar Solutions | N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethy...view more N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes. N,N-Diethylethanolamine offers an optimal compatibility with resins and film matrix. N,N-Diethylethanolamine supports the flow and leveling during film forming. view less | Request Sample |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecula...view more Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. view less | |
| Ymer™ N120 | Perstorp | Ymer™ N120 is a polymeric, nonionic dispersing monomer chemical intermediate. This product is a white amorphous material used in waterborne resins systems, polyurethane dispersions, hydrophilic PU-systems, and surfactants. | |
| Hydrorene AW 1 | S.A.P.I.C.I. SpA | Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives. | |
| HPA | GIMEL Technical Materials | HPA, 2-Hydroxypropyl acrylate, is the most popular monomer used for synthesizing both water-borne and solvent-borne acrylic resins. It supplies primary hydroxyl to acrylic resin which offers a fast reaction speed and moderate hardness. | Request Sample |
| Diisopropanolamine | BASF Corporation, Chemical Intermediates | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | |
| Diisopropanolamine | Univar Solutions | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | Request Sample |
| Neopentyl Glycol 90 | Perstorp | Neopentyl Glycol 90 is a colorless, aqueous solution. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats. | |
| KOMERATE C002 | Green Chemical Co., Ltd. | KOMERATE C002 is in the class of carboxylic monomers of the acrylic or methaclic acid type. More compatible with other monomers, thus reducing aqueous phase polymerization and producing more uniform copolymers. | |
| 2-Mercaptoethanol | BASF Corporation, Chemical Intermediates | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF Corporation, Chemical Intermediates | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne...view more Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating view less | |
| SR644 | Sartomer Americas | SR644 is a polypropylene glycol dimethacrylate that produces flexible films and is used in adhesives, sealants, plastisols and waterborne coatings. Performance properties include: good chemical resistance, good hardness, good water resistance, high abrasi...view more SR644 is a polypropylene glycol dimethacrylate that produces flexible films and is used in adhesives, sealants, plastisols and waterborne coatings. Performance properties include: good chemical resistance, good hardness, good water resistance, high abrasion resistance, high flexibility and low shrinkage. view less | |
| N-Methylpyrrolidone, NMP | BASF Corporation, Chemical Intermediates | N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings...view more N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings. view less | |
| SR9035 | Sartomer Americas | Sr9035 is a 15-mole, ethoxylated, trimethylolpropane triacrylate is a water soluble, low skin irritation monomer for use in free radical polymerization. It Yields flexible, low shrinkage films. Product Highlights: highly water soluble, aqueous thickener...view more Sr9035 is a 15-mole, ethoxylated, trimethylolpropane triacrylate is a water soluble, low skin irritation monomer for use in free radical polymerization. It Yields flexible, low shrinkage films. Product Highlights: highly water soluble, aqueous thickener, low skin irritation. Applications: acrylics; paints; photopolymers, inks, pressure sensitive and structural adhesives, chemical intermediates, glass, metal, optical, wood, Paper, PVC floor, release, and textile coatings, photoresists, solder mask and electronics. view less | |
| N-Ethylpyrrolidone, NEP | BASF Corporation, Chemical Intermediates | N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for...view more N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for water-borne coatings, and for electro insulation coatings. In many applications N-Ethylpyrrolidone can replace N-Methylpyrrolidone. view less | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for...view more TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has a viscosity (Brookfield @ 25°C) of 40-60P, a moisture content of 0.05% max., and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has an acid value (as supplied) of 0.8mg KOH/g max., a viscosity (Brookfield @ 25°C (as supplied)) of 15-30 Poise, and a colour (APHA) of 250 max. view less | |
| Ethylene diamine | BASF Corporation, Chemical Intermediates | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | |
| Ethylene diamine | Univar Solutions | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | Request Sample |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...view more Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. view less | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with an acid value (as supplied) of 0.8mg KOH/g max., a hydroxyl content (as supplied) of 87-93mg KOH/g, and a viscosity (Brookfield @ 25°C (as supplied)) of 100-200P. view less | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating h...view more TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with a density (pounds / gallon @ 25°C) of 9.3 +/- 0.3, a moisture content of 0.05 max., viscosity (Brookfield @ 25°C (as supplied)) of 300-500P, and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| NPG, Neol® Neopentylglycol | BASF Corporation, Chemical Intermediates | NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for plastic coatings and for repair coatings. Neopentyl-glycol is used for water borne polyesters for automotive coatings, repair coatings and coatings for general industry. It is also used for polyesters for powder coatings. Neopentylglycol shows high reactivity for esterification and trans-esterification. Neopentylglycol introduces solubility and compatibility into polyester molecules, avoiding crystallinity. NNeopentylglycol offers high chemical, thermal and UV ...view more NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for plastic coatings and for repair coatings. Neopentyl-glycol is used for water borne polyesters for automotive coatings, repair coatings and coatings for general industry. It is also used for polyesters for powder coatings. Neopentylglycol shows high reactivity for esterification and trans-esterification. Neopentylglycol introduces solubility and compatibility into polyester molecules, avoiding crystallinity. NNeopentylglycol offers high chemical, thermal and UV resistance. Polyesters show good hardness and excellent weather resistance. view less | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...view more Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. view less | |
| Baymedix® FP503 | Covestro | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| N-Vinylpyrrolidone, NVP | BASF Corporation, Chemical Intermediates | N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a react...view more N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a reactive diluent in UV coatings, UV inks and UV adhesives. view less | |
| Duranate™ WT31-100 | Kowa American Corporation | Duranate™ WT31-100 is a water dispersible polyisocyanate based on hexamethylene diisocyanate. It has good film properties and good weather resistance. | Request Sample |
| Duranate™ WL72-100 | Kowa American Corporation | Duranate™ WT31-100 is a water dispersible polyisocyanate based on hexamethylene diisocyanate. It has good film properties and good weather resistance. | Request Sample |
| Priplast 3186 | Cargill Industrial Specialties | Priplast 3186 is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. | |
| Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) | Croda Coatings & Polymers | Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative ...view more Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| 2-Hydroxyethyl Methacrylate (HEMA) | Kowa American Corporation | 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provide...view more 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provides scratch, solvent & weather resistance, control of hydrophobicity &/or can introduce reactive sites. view less | Request Sample |
| Priplast™ 3186 Polyester Polyol | Croda Coatings & Polymers | Priplast™ 3186 Polyester Polyol is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. It provides resistance to hydrolytic attack, alkal...view more Priplast™ 3186 Polyester Polyol is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1-Vinylimidazole, VIM | BASF Corporation, Chemical Intermediates | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| Silmer®ACR D208 | Siltech Corp. | Silmer®ACR D208 is a water-soluble multi-functional silicone acrylate pre-polymer. It has a specific gravity of 1.07 and a viscosity of 300 - 1000. Silmer®ACR D208 is used as an additive in UV curing systems as well as to modify acrylate polymers to impro...view more Silmer®ACR D208 is a water-soluble multi-functional silicone acrylate pre-polymer. It has a specific gravity of 1.07 and a viscosity of 300 - 1000. Silmer®ACR D208 is used as an additive in UV curing systems as well as to modify acrylate polymers to improve surface and physical properties. view less | |
| SR508IJ | Sartomer Americas | SR508IJ is a difunctional monomer designed to increase the gelation stability of UV formulations at elevated temperatures. Performance properties include: abrasion resistance, adhesion, chemical resistance, hardness, impact strength and water resistance. ...view more SR508IJ is a difunctional monomer designed to increase the gelation stability of UV formulations at elevated temperatures. Performance properties include: abrasion resistance, adhesion, chemical resistance, hardness, impact strength and water resistance. Suggested applications include: coatings and inkjet inks. view less | |
| Silmer®ACR Di-1508 | Siltech Corp. | Silmer®ACR Di-1508 is a water-dispersable di-functional silicone acrylate pre-polymer. It has a specific gravity of 1.04 and a viscosity of 750-2,500. Silmer®ACR Di-1508 is used as an additive in UV curing systems as well as to modify acrylate polymers to...view more Silmer®ACR Di-1508 is a water-dispersable di-functional silicone acrylate pre-polymer. It has a specific gravity of 1.04 and a viscosity of 750-2,500. Silmer®ACR Di-1508 is used as an additive in UV curing systems as well as to modify acrylate polymers to improve surface and physical properties. view less | |
| Priplast 3197 | Cargill Industrial Specialties | Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low pola...view more Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low polar components. view less | |
| Benzyl Acrylate (BZA, V-160) | Kowa American Corporation | Benzyl Acrylate (BZA, V-160) is a clear water white liquid. It is .044% insoluble in water. | Request Sample |
| SR504 | Sartomer Americas | SR-504, Ethoxylated Nonyl-Phenol Acrylate is a low odor, low volatility, low skin irritation monomer for use in UV/EB polymerization. Performance properties include: flexibility, adhesion, low shrinkage, abrasion resistance, impact strength and water re...view more SR-504, Ethoxylated Nonyl-Phenol Acrylate is a low odor, low volatility, low skin irritation monomer for use in UV/EB polymerization. Performance properties include: flexibility, adhesion, low shrinkage, abrasion resistance, impact strength and water resistance. Suggested applications include: pressure sensitive adhesives, plastic coatings and metal coatings. view less | |
| N-Octadecyl vinyl ether, ODVE | BASF Corporation, Chemical Intermediates | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...view more N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| Priplast™ 3192 | Croda Coatings & Polymers | Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidati...view more Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| SR493D | Sartomer Americas | SR493D is a Tridecyl methacrylate, low volatility, low odor, and low skin and eye irritation monomer for use in UV/EB polymerization. Performance properties include: good adhesion, good water resistance, good weatherability, high flexibility, high impact ...view more SR493D is a Tridecyl methacrylate, low volatility, low odor, and low skin and eye irritation monomer for use in UV/EB polymerization. Performance properties include: good adhesion, good water resistance, good weatherability, high flexibility, high impact strength and low shrinkage. Suggested applications include: adhesives, chemical intermediates and coatings. view less | |
| DOUBLEMER® BPA2EODA | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® BPA2EODA is a di-functional monomer with low skin irritation, low volatility, and low odor, generally for use in UV-curing related applications. It exhibits good adhesion and hardness, good heat resistance and water resistance, low shrinkage an...view more DOUBLEMER® BPA2EODA is a di-functional monomer with low skin irritation, low volatility, and low odor, generally for use in UV-curing related applications. It exhibits good adhesion and hardness, good heat resistance and water resistance, low shrinkage and good chemical resistance. This clear liquid is recommended for the following applications: coatings; inks; adhesives; electronics, photoresists and photopolymers; and electronics, solder masks. view less | |
| Priplast™ 3190 | Croda Coatings & Polymers | Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali ...view more Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) | Cargill Industrial Specialties | Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and tempe...view more Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| DOUBLEMER® R1601L4 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® R1601L4 is a specially designed monomer with low skin irritation, low volatility, low odor, and high refractive index performance, applicable in UV-curing of optical film applications. It is also suitable for coatings, inks and adhesives. This ...view more DOUBLEMER® R1601L4 is a specially designed monomer with low skin irritation, low volatility, low odor, and high refractive index performance, applicable in UV-curing of optical film applications. It is also suitable for coatings, inks and adhesives. This product exhibits good adhesion and hardness, good heat resistance and water resistance and low shrinkage. view less | |
| 2-Methoxyethyl Acrylate (MTA) | Kowa American Corporation | 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, ...view more 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, water resistance and adhesion. When used as an additive, it improves oil resistance dues to its polarity. view less | Request Sample |
| Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...view more Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. view less | |
| Priplast™ 3286 | Croda Coatings & Polymers | Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow an...view more Priplast™ 3286 is a 100% bio-based polyester polyol, building block for cross-linked PU adhesives, cast PU elastomers, as well as foams and sealants. It brings excellent water resistance, improved flexibility, hydrolytic stability, as well as good flow and wetting properties. This product is used for adhesives & sealants, foams, and industrial coating applications. view less | |
| SR494 | Sartomer Americas | SR494 is a heat resistant, fast curing, tetrafunctional monomer for use in UV/EB polymerization. It is a low skin irritation monomer. Performance properties include: adhesion, chemical and water resistance, hardness and abrasion resistance, heat resistanc...view more SR494 is a heat resistant, fast curing, tetrafunctional monomer for use in UV/EB polymerization. It is a low skin irritation monomer. Performance properties include: adhesion, chemical and water resistance, hardness and abrasion resistance, heat resistance, weatherability and impact strength. Suggested applications include: adhesives, chemical intermediates, coatings, electronics, inks, rubber and plastics and sealants. view less | |
| Priplast™ 3198 Polyester Polyol | Croda Coatings & Polymers | Priplast™ 3198 Polyester Polyol is a low MW, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols and excellent hydrophobicity. It provides resistance t...view more Priplast™ 3198 Polyester Polyol is a low MW, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols and excellent hydrophobicity. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3187 | Croda Coatings & Polymers | Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent w...view more Priplast™ 3187 is a dimer fatty acid based, polyester polyol building block for PU adhesives, sealants, and elastomers. It provides high flexibility at very low temperatures as well as good compatibility to low polar components It also brings excellent water resistance, hydrolytic stability, and good flow and wetting properties. This product is used for adhesives & sealants and elastomers applications. view less | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...view more DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. view less | |
| N-Dodecyl vinyl ether, DDVE | BASF Corporation, Chemical Intermediates | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy si...view more N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| Priplast™ 3196 Polyester Diol | Croda Coatings & Polymers | Priplast™ 3196 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatability for polymer blends. It has possible use in s...view more Priplast™ 3196 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatability for polymer blends. It has possible use in soft touch applications. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 1838 Polyester Diol | Croda Coatings & Polymers | Priplast™ 1838 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substra...view more Priplast™ 1838 Polyester Diol is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substrates, like plastics. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Isobornyl Acrylate (IBXA) | Kowa American Corporation | Isobornyl Acrylate (IBXA) is a clear water white liquid. It has a 7.6 cps viscosity at 28°C. | Request Sample |
| PLACCEL 208 | Daicel (U.S.A.), Inc. | PLACCEL 208 is general purpose type polycaplolactone diol and its molecular weight is 830. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols....view more PLACCEL 208 is general purpose type polycaplolactone diol and its molecular weight is 830. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. PLACCEL 208 can be used as modifying agents, such as polyurethane, paint resin, and epoxy resin. Especially, the polyurethane of 208 bases is excellent in durability, hydrolysis resistance, oil resistance, heat resistance and low temperature characteristics, and it can be used for many fields, such as an elastomer, foam, spandex, adhesives, and artificial suede. view less | |
| 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) | Kowa American Corporation | 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) is a clear water white liquid. It has mehq and phenothiazine (PTZ) as inhibitors. | Request Sample |
| Cyclohexyl Acrylate (CHA, V-155) | Kowa American Corporation | Cyclohexyl Acrylate (CHA, V-155) is a clear water white liquid. When shipped, it is packed in 180 Kg (397lb) steel drums. | Request Sample |
| PLACCEL 220N | Daicel (U.S.A.), Inc. | PLACCEL 220 is polycaplolactone diol and its molecular weight is 2000. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. In particular, PLAC...view more PLACCEL 220 is polycaplolactone diol and its molecular weight is 2000. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. In particular, PLACCEL 220N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 220N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elastomers are solid tires, rollers, scratching blades of toner for copy machines. Because of their low content of low molecule oligomer unit, the so-called “blooming” is not likely to occur. view less | |
| Tetrahydrofurfuryl Acrylate (THFA, V-150) | Kowa American Corporation | Tetrahydrofurfuryl Acrylate (THFA, V-150) is a clear water white liquid. When shipped, it is packed 200Kg (441lb) net wt. steel drums. | Request Sample |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...view more Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| Glyclean™ D70 | Chemours Titanium Technologies | Glyclean™ D70 uses the power of nature to kill bacteria and viruses. This nonflammable, VOC exempt, antimicrobial raw material is based upon glycolic acid, nature’s preservative and protector. It is designed for use in various hard surface cleaning and di...view more Glyclean™ D70 uses the power of nature to kill bacteria and viruses. This nonflammable, VOC exempt, antimicrobial raw material is based upon glycolic acid, nature’s preservative and protector. It is designed for use in various hard surface cleaning and disinfecting formulations. Glyclean™ D70 has low corrosivity, making it effective for household and institutional cleaning applications, including removing soap scum and hard water deposits. Chemours’ Glyclean™ Hard Surface Cleaner formulation is registered with the EPA to kill the SARS-CoV-2 the cause of Covid-19 illness. view less | |
| SPUR+ 1012 prepolymer | Momentive | SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination...view more SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable resin is an excellent candidate to consider in formulating construction sealants requiring rapid cure, good water resistance, high flexibility and adhesion to most construction substrate materials such as concrete, marble and glass. view less | |
| 4-Hydroxybutyl Acrylate (4HBA) | Kowa American Corporation | 4-HBA is a clear water white liquid. It is used for automotive painting. It helps protect against hardness and anit-rust, as well as offers good color, flatness, smoothness, brightness, and gloss. | Request Sample |
| Priplast™ 3162 Polyester Diol | Croda Coatings & Polymers | Priplast™ 3162 Polyester Diol provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...view more Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). view less | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-...view more Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-catalysed hydrolysis. Since all 4 ethoxy groups are able to participate in this reaction, Dynasylan® A is regarded as tetrafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates condensation, continues until a gel is formed. The rate of gelation depends on the concentration of water. view less | |
| Priplast™ 3172 Polyester Diol | Croda Coatings & Polymers | Priplast™ 3172 Polyester Diol is a polyester diol with a hydroxyl value range of 35 to 41. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins...view more Priplast™ 3172 Polyester Diol is a polyester diol with a hydroxyl value range of 35 to 41. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...view more Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties wh...view more Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). view less | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt...view more Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. view less | |
| DOUBLEMER® BPA2EODMA | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® BPA2EODMA is a highly reactive crosslinker, due to its difunctional methacrylate group. The copolymerization can be carried out with conventional peroxides or irradiation. DOUBLEMER® BPA2EODMA provides good adhesion, flexibility, low shrinkage,...view more DOUBLEMER® BPA2EODMA is a highly reactive crosslinker, due to its difunctional methacrylate group. The copolymerization can be carried out with conventional peroxides or irradiation. DOUBLEMER® BPA2EODMA provides good adhesion, flexibility, low shrinkage, impact strength, water/chemical resistance and high refractive index. This product is recommended for use in the following applications: coatings for paper, wood and plastics; ophthalmic lenses; dry lithographic inks; fast curing coatings, inks and clear varnishes; scratch and solvent resistant coatings; improve adhesive strength; concrete polymers; and electronic photoresists. view less | |
| Dynasylan® PTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® PTEO, an alkyltrialkoxysilane, is an important monomer for use in sol-gel systems. | |
| Stearyl Acrylate (STA) | Kowa American Corporation | Stearyl Acrylate (STA) is a clear liquid above 30°C and a white waxy solid below 28°C. When shipped, it is packed in 153Kg (337lb) net wt. steel drums. | Request Sample |
