UL Prospector

Success!

Successfully saved your search
20 Results
Desmodur® E 1160 MPA/X Covestro Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for m...view more Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and chemical damage. view less
Desmodur® E 14 Covestro Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...view more Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. view less
Desmodur® I Covestro Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and po...view more Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. view less
Duranate™ TUL-100 Hexamethylene Diisocyanate (HDI) Based Polyiscyanate Kowa American Corporation Duranate™ TUL-100 is an ultra-low viscosity HDI based polyisocyanate. In fact, TUL-100 is the lowest viscosity trimer HDI available in the industry. TUL-100 is used in high solids & waterborne formulations & provides excellent gel fraction, hardness and ...view more Duranate™ TUL-100 is an ultra-low viscosity HDI based polyisocyanate. In fact, TUL-100 is the lowest viscosity trimer HDI available in the industry. TUL-100 is used in high solids & waterborne formulations & provides excellent gel fraction, hardness and weatherability for the automotive, architectural, industrial and other similar market segments. view less Request Sample
Hydrorene 33 S.A.P.I.C.I. SpA Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes.
Hydrorene AW 1 S.A.P.I.C.I. SpA Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives.
Polurene MD 60 AB S.A.P.I.C.I. SpA Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating t...view more Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating tendencies, resulting in a smooth surface with good brightness. It also improves adhesion on difficult substrates. view less
Polurene MD 70 AE S.A.P.I.C.I. SpA Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good b...view more Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good brightness. It can be used in 1K barrier coatings for wood with high oil content. view less
Polurgreen M 570 S.A.P.I.C.I. SpA Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems ...view more Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems with high solids content. It contains less than .5% TDI isocyanates. view less
Quasilan CT 23 Baxenden Chemicals Ltd. Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone.
Quasilan CT 29 Baxenden Chemicals Ltd. Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone.
Trixene SC 7702 Baxenden Chemicals Ltd. Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stabili...view more Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less
Trixene SC 7703 Baxenden Chemicals Ltd. Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/...view more Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less
Trixene SC 7707 Baxenden Chemicals Ltd. Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance ...view more Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less
Trixene SC 7722 Baxenden Chemicals Ltd. Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less
Trixene SC 7725 Baxenden Chemicals Ltd. Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less
Trixene SC 7902 Baxenden Chemicals Ltd. Trixene SC 7902 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements.
Trixene SC 7930 Baxenden Chemicals Ltd. Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coat...view more Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coatings. view less
Trixene SC 7931 Baxenden Chemicals Ltd. Trixene SC 7931 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements.
Wannate® HDI Hexamethylene Diisocyanate Wanhua Chemical Group Co., Ltd. Wannate® HDI is a liquid aliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity. Wannate® HDI is a raw material for polyurethanes. Products based on Wannate® HDI are mainly used in PU varnish, top-grade coatings, car refinishin...view more Wannate® HDI is a liquid aliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity. Wannate® HDI is a raw material for polyurethanes. Products based on Wannate® HDI are mainly used in PU varnish, top-grade coatings, car refinishing paint, plastic coating, top-grade wood-paint, industrial coating, anti-corrosive coating, elastomers, adhesives and textile finshing agent. Polyurethane coatings based on Wannate® HDI have a high degree of oil resistance coupled with good wear-resisting; It is also lightfast and has the property of powdering resistance,color retention and weathering resistance. In addition, Wannate® HDI also can be used in coating curing agent, high polymer adhesive, low temperature adhesive for printing paste, collar copolymer coating, and immobilized enzyme adhesive. view less Request Sample