| Resiflow® PH-240 | Estron Chemical, Inc. | Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat a...view more Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat adhesion and wetting on hydrophilic substrates such as sandblasted or unpolished metal. Resiflow® PH-240 can also improve or eliminate surface defects including orange peel, pinholes and craters. view less | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...view more Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. view less | |
| Crystal™ SB | PQ Corporation | Crystal™ SB is a formulated soluble silicate used as a pH-stabilizing agent specifically developed for architectural coatings that stabilizes pH, while maintaining and/or improving paint properties and so providing formula cost savings benefits. | |
| Rovene® 6523 | Mallard Creek Polymers, Inc. | Rovene® 6523 is a nonionic neutral pH carboxylated acrylic copolymer latex. It is an all acrylic latex designed for interior/exterior applications. | |
| HydriCryl 430 | Hydrite Chemical Co. | HydriCryl 430 is a high gloss polymer with good resolubility and transfer when used in neutral pH systems. This product is well suited for use in water-based inks and coatings. | |
| Hydro-Rez™ 1100D A | Lawter | Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the pre...view more Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product gives off a low odor, gloss, fast drying speed, rub, transparency, adhesion and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1100D A is suitable for use in water-based coatings and primers as well as water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 1200D2 A | Lawter | Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on th...view more Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product has the benefit of providing low odor, gloss, adhesion, transparency, fast drying speed and water, rub and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1200D2 A is suitable for use in water-based coatings and primers and in water-based gravure and flexo inks. view less | |
| BYD2301 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2301, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in electrostatic flocking of textiles. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. | |
| BYD2303 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2303, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in gold prints for textiles. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. | |
| Hydro-Rez™ 1400D A | Lawter | Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that pH neutral inks formulated with the product's resins don't need pH ...view more Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that pH neutral inks formulated with the product's resins don't need pH adjustment on the press. Hydro-Rez™ 1400D A provides gloss, low odor, adhesion, fast drying speed, rub, transparency and scuff resistance to coatings, inks and primers. It is suitable for use in waster-based coatings and primers and in water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 2140D A | Lawter | Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks...view more Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with resins from the product line don't need pH adjustment on the press. The product gives off a fast drying speed, low odor, adhesion, gloss, rub, transparency and scuff resistance to coatings, inks and primers. Hydro-Rez™ 2140D A is suitable for use in water-based primers and coatings and in water-based gravure and flexo inks. view less | |
| BYD2302 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2302, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in the production of soft polyester wadding. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 6.0 +/- 1.0. | |
| BYD8600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD8600, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used as a surface coating for textile applications. This product is hydrophobic and retains its gloss well. Its pH value is 7.0 +/- 1.0. | |
| C9 Resin | Yangzhou Sunchem Co., Ltd. | C9 Resin is a light yellow granular synthetic resin that has a pH value of 6-8 and an acid value of 0.5 mgKOH/g maximum. This product is used as a raw material for adhesives, sealants, coatings, and printing inks. | |
| Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...view more Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. view less | |
| REVACRYL™ UG 1876 | Synthomer | REVACRYL UG 1876 is low MFFT, low odor styrene-acrylic dispersion. It is designed to function especially in high pH biocide free coating formulations and is extremely stable with silicates. It shows an excellent water-resistance and high scrub resistance. | |
| BYD2640 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0...view more BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD5105 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5105, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in textiles to make them stiffer and smoother. This product offers excellent yellowing resistance and is APEO free. Its pH value is 4.0 +/- 1.0. | |
| BYD2630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2630, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in elastic interior or exterior wall coatings, and in gigging coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH ...view more BYD2630, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in elastic interior or exterior wall coatings, and in gigging coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD2600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH ...view more BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| AT-45U | Chan Sieh Enterprises Co, Ltd. | AT-45U is a self-crosslinking acrylic resin in the form of a white emulsion. This product offers a low pH value, good water- and solvent-resistance, with good mechanical stability. It can be used as a binder for semi-hard-type non-woven fabrics. | |
| A-45U | Chan Sieh Enterprises Co, Ltd. | A-45U is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. It can be used as a fabric adhesive for non-woven fabrics. This product has a low pH value, provides excellent water- and solvent-resistance, and excellent mechanic...view more A-45U is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. It can be used as a fabric adhesive for non-woven fabrics. This product has a low pH value, provides excellent water- and solvent-resistance, and excellent mechanical stability. view less | |
| BYD2610 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH ...view more BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD5110 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH val...view more BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH value is 4.0 +/- 1.0. view less | |
| BYD2620 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH ...view more BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD5120 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5120, in the form of a white, waterborne anionic emulsion, is a vinyl versatates copolymer that can be used in Mercerized interior wall coatings or high quality interior wall coatings. This product is resistant to alkaline substrates with an homogenous gloss. Its pH ...view more BYD5120, in the form of a white, waterborne anionic emulsion, is a vinyl versatates copolymer that can be used in Mercerized interior wall coatings or high quality interior wall coatings. This product is resistant to alkaline substrates with an homogenous gloss. Its pH value is 4.0 +/- 1.0. view less | |
| BYD7201 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7201, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a plastic binder for PVC, PS, fabrics, wood, paper, and cement applications. This product offers strong cohesive strength and fast film formation. Its pH ...view more BYD7201, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a plastic binder for PVC, PS, fabrics, wood, paper, and cement applications. This product offers strong cohesive strength and fast film formation. Its pH value is 5.0 +/- 1.0. view less | |
| BYD8001 | Tianyi Chemical Engineering Material Co., Ltd. | BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain resistance. Its pH ...view more BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain resistance. Its pH value is 9.0 +/- 1.0. view less | |
| BYD7231 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesive strength and thickening effects. Its pH ...view more BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesive strength and thickening effects. Its pH value is 5.0 +/- 1.0. view less | |
| StanChem SC 6477 | StanChem Polymers | StanChem SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH ...view more StanChem SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening. view less | Request Sample |
| Picassian® XL-702 | Stahl Polymers | Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formulated at a pH ...view more Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formulated at a pH greater than 8 to achieve a long pot life. view less | |
| C9-7 | SWISLOYD LIMITED | C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...view more C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. view less | |
| C9-8 | SWISLOYD LIMITED | C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...view more C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. view less | |
| C9-10 | SWISLOYD LIMITED | C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...view more C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. view less | |
| C9-12 | SWISLOYD LIMITED | C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...view more C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. view less | |
| CARBODILITE™ SV-02 | GSI Exim America, Inc. | CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion,...view more CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. view less | |
| Forton® VF 774 | EPS Materials | Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be stable and durable in the high pH ...view more Forton® VF 774 is an all acrylic, co-polymer dispersion specifically formulated for the Glass Fiber Reinforced Concrete (GFRC) production process as well as for concrete and concrete repair products. VF-774 is UV stable and is further formulated to be stable and durable in the high pH Portland cement-based GFRC composite. view less | Request Sample |
| UCECOAT® 7200 | Allnex | UCECOAT® 7200 is a waterborne urethane acrylate for hardcoat applications. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV resins (after pH ...view more UCECOAT® 7200 is a waterborne urethane acrylate for hardcoat applications. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV resins (after pH neutralization) to increase solid content and/or hardness property. view less | Request Sample |
| Hydro-Rez™ 1000D A | Lawter | Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film formation, adhesion and flexibility on non-absorbent substrates. The product is a stable dispersion with no surfactants or solvents. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH ...view more Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film formation, adhesion and flexibility on non-absorbent substrates. The product is a stable dispersion with no surfactants or solvents. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The polymer has the benefit of giving off gloss, adhesion, transparency, fast drying speeds, low odor and scuff resistance on coatings, inks and primers. It is ideally suited for use in water-based primers and coatings or in water-based gravure and flexo inks. view less | |
| RayTech® 365 | Specialty Polymers | RayTech® 365 is a styrene acrylic emulsion polymer modifier designed to improve water and block resistance of a coating. Block resistance is enhanced with RayTech® 365 without increasing VOCs. RayTech® 365 is an alkali solution that needs to be maintained at a minimum pH ...view more RayTech® 365 is a styrene acrylic emulsion polymer modifier designed to improve water and block resistance of a coating. Block resistance is enhanced with RayTech® 365 without increasing VOCs. RayTech® 365 is an alkali solution that needs to be maintained at a minimum pH of 9.0. Suggested for use as a modifier, and in waterproofing solution. view less | |
| Idroben 130 | Benasedo | Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH l...view more Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH level of 6.5-7.5, and a viscosity [Brookf.] m Pa.s of 3000. view less | |
| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH ...view more BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. view less | |
| Acryline® EM 33 EX | Isogama Industria Quimica Ltda. | Acryline® EM 33 EX is a aqueous emulsion of styrene-acrylic polymer. Acryline® EM 33 EX gives properties such as medium thickening power, excellent flatness, great applicability and stability. The ideal pH range for use between 8.5 to 9.5 where the highes...view more Acryline® EM 33 EX is a aqueous emulsion of styrene-acrylic polymer. Acryline® EM 33 EX gives properties such as medium thickening power, excellent flatness, great applicability and stability. The ideal pH range for use between 8.5 to 9.5 where the highest thickening power is observed. The product is compatible with other acrylic or cellulosic thickeners. view less | |
| Acryline® EA 300 EX | Isogama Industria Quimica Ltda. | Acryline® EA 300 EX is a aqueous emulsion of styrene-acrylic polymer. Acryline® EA 300 EX gives properties such as high thickening power, excellent flatness, great applicability and stability. the ideal pH range for use is between 8.5 to 9.5 where the hig...view more Acryline® EA 300 EX is a aqueous emulsion of styrene-acrylic polymer. Acryline® EA 300 EX gives properties such as high thickening power, excellent flatness, great applicability and stability. the ideal pH range for use is between 8.5 to 9.5 where the highest thickening power is observed. The product is compatible with other acrylic or cellulosic thickeners. view less | |
| CYMEL® 3020 | Allnex | CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is inso...view more CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is insoluble in water but has excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| Idroben 202 | Benasedo | Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% solids content. It has a viscosity [Brookf.] m Pa.s of 50-70, and a pH ...view more Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% solids content. It has a viscosity [Brookf.] m Pa.s of 50-70, and a pH level of 7.0-8.0. view less | |
| Flexisperse™ 134NH | Innovative Chemical Technologies, Inc. | Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has a pH ...view more Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has a pH of 9.0 +/- 0.5 and a boiling point of 100 degrees Celsius. It is designed for pigment dispersion in water-based coatings. view less | Request Sample |
| Flexisperse™ 133N | Innovative Chemical Technologies, Inc. | Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product has a boiling point of 100 degrees Celsius and a pH ...view more Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product has a boiling point of 100 degrees Celsius and a pH of 7.0 +/- 1.0. It is designed for pigment dispersion in water-based coatings. view less | Request Sample |
| Ruanta-Dispersant | Jiangsu Runtai Chemical Co., Ltd. | Ruanta-Dispersant, in the form of a thick, pale yellow liquid, is an anionic polyacrylic sodium salt solution that can be used as a pigment dispersant in latex paints. This product contains above 40% solids and has a pH range from 6.0-8.0. Pigments made...view more Ruanta-Dispersant, in the form of a thick, pale yellow liquid, is an anionic polyacrylic sodium salt solution that can be used as a pigment dispersant in latex paints. This product contains above 40% solids and has a pH range from 6.0-8.0. Pigments made with this product will have better covering power, gloss and polish resistance when mixed with latex paint. view less | |
| CARBODILITE™ E-03A | GSI Exim America, Inc. | CARBODILITE™ E-03A is a crosslinking agent with a higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with ...view more CARBODILITE™ E-03A is a crosslinking agent with a higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite E-series is a polycarbodiimide based waterborne emulsion that contains a carbodiimide [─N═C═N─] group. view less | |
| CARBODILITE™ E-02 | GSI Exim America, Inc. | CARBODILITE™ E-02 is a crosslinking agent characterized by its longer pot-life. It has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with ...view more CARBODILITE™ E-02 is a crosslinking agent characterized by its longer pot-life. It has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite E-series is a polycarbodiimide based waterborne emulsion that contains a carbodiimide [─N═C═N─] group. view less | |
| Acryline® EA 300 | Isogama Industria Quimica Ltda. | Acryline® EA 300 um dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de alta reatividade (alta viscosidade) empregado na produção de massas e afins. O produto Acryline® EA 300 atribui propriedades como: alto poder de espessamento, excelente nivelamento, aplicabilidade e estabilidade. Utilização ideal na faixa de pH ...view more Acryline® EA 300 um dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de alta reatividade (alta viscosidade) empregado na produção de massas e afins. O produto Acryline® EA 300 atribui propriedades como: alto poder de espessamento, excelente nivelamento, aplicabilidade e estabilidade. Utilização ideal na faixa de pH entre 8,5 – 9,5, aonde se pode observar maior poder de espessamento. view less | |
| Idroben 180 | Benasedo | Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a white milky colour, has a pH ...view more Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a white milky colour, has a pH level of 7.0-8.0, a solids content of 44%, and a viscosity [Brookf.] m Pa.s of 700-1000. view less | |
| Idroben 178 | Benasedo | Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 33%. This product has a viscosity [Brookf.] m Pa.s of 700-1300, a pH ...view more Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 33%. This product has a viscosity [Brookf.] m Pa.s of 700-1300, a pH level of 7.3-7.8, and a white milky colour. view less | |
| Idroben 201 | Benasedo | Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains 35% solids, has a viscosity [Brookf.] m Pa.s of 50-70, and has a pH ...view more Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains 35% solids, has a viscosity [Brookf.] m Pa.s of 50-70, and has a pH level of 7.0=8.0. This product has bake and air applications. view less | |
| ROHAGIT™ SD 15 | Synthomer | ROHAGIT™ SD 15 is a finely dispersed aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer, anionic stabilised. The dispersion is free from APEO, film forming aids, solvents and plasticizers. ROHAGIT™ SD 15 is a pure acrylic unive...view more ROHAGIT™ SD 15 is a finely dispersed aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer, anionic stabilised. The dispersion is free from APEO, film forming aids, solvents and plasticizers. ROHAGIT™ SD 15 is a pure acrylic universal ASE-thickener for pH-range > 8.0. It is UV stable and shows an excellent efficacy and is easy to incorporate. The consistency is pasty, not thready. view less | |
| UCECOAT® 7210 | Allnex | UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasion and chemical resistances. UCECOAT® 7210 can be blended (with prior pH ...view more UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasion and chemical resistances. UCECOAT® 7210 can be blended (with prior pH adjustment if required) with other waterborne UV resins to increase solid content and/or flexibility. view less | Request Sample |
| CYMEL® 1172 | Allnex | CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH with excel...view more CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH with excellent reactivity. It cannot be used in amine neutralized or basic coating systems because of the potential problems of demethylolation of the compound and a significant decrease in cure response. view less | Request Sample |
| AFCONA - 1503 | AFCONA Additives Sdn Bhd | AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of tinting systems where low shear force is used, and in systems with a wide pH ...view more AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of tinting systems where low shear force is used, and in systems with a wide pH range. AFCONA - 1503 finds application in water- and solvent-based decorative paint systems. view less | |
| Ottopol M-30 | Gellner Industrial, LLC | Ottopol M-30 is a slightly hazy acrylic resin solution. It is an excellent vehicle for inks made with copper and aluminum powder. The product's strong points are minimal soft settling of the metallic powder, and no tarnishing. Ottopol M-30 has extraordinary compatibility with basic dyes and fluorescent pigments. Fluorescent inks made from this product show no pH ...view more Ottopol M-30 is a slightly hazy acrylic resin solution. It is an excellent vehicle for inks made with copper and aluminum powder. The product's strong points are minimal soft settling of the metallic powder, and no tarnishing. Ottopol M-30 has extraordinary compatibility with basic dyes and fluorescent pigments. Fluorescent inks made from this product show no pH swing, which causes stability problems in other vehicle systems. view less | |
| RayRez® 182D | Specialty Polymers | RayRez® 182D is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss, outstanding pH stability, and ink transfer properties. RayRez® 182D can be used in high performance inks and over print...view more RayRez® 182D is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss, outstanding pH stability, and ink transfer properties. RayRez® 182D can be used in high performance inks and over printing varnish for paper and corrugated board. RayRez® 182D is suitable for formulation of inks in flexographic, gravure and roll coater applications. Other key features include outstanding resolubility, while remaining cost effective. view less | |
| Acryline® EM 33 | Isogama Industria Quimica Ltda. | Acryline® EM 33 dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de média reatividade (viscosidade) empregado na produção de tintas e afins. O produto Acryline® EM 33 atribui propriedades como: médio poder de espessamento, excelente nivelamento, aplicabilidade e estabilidade. Utilização ideal na faixa de pH ...view more Acryline® EM 33 dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de média reatividade (viscosidade) empregado na produção de tintas e afins. O produto Acryline® EM 33 atribui propriedades como: médio poder de espessamento, excelente nivelamento, aplicabilidade e estabilidade. Utilização ideal na faixa de pH entre 8,5 – 9,5 onde se observa maior poder de espessamento. Ele é compatível com outros espessantes acrílicos ou celulósicos de mercado. view less | |
| CARBODILITE™ V-02 | GSI Exim America, Inc. | CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne ure...view more CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. view less | |
| CYMEL® 1123 | Allnex | CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesio...view more CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| RayRez® 256 | Specialty Polymers | RayRez® 256 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has outstanding rub resistance, excellent pH stability and ink transfer properties. RayRez® 256 can be used in regular inks for ...view more RayRez® 256 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has outstanding rub resistance, excellent pH stability and ink transfer properties. RayRez® 256 can be used in regular inks for paper and corrugated board especially for kraft paper and kraft paper board. RayRez® 256 is suitable for formulation of ink in flexographic, gravure and roll coater applications. Other key features also include fast drying times, and good hiding power. view less | |
| CARBODILITE™ V-02-L2 | GSI Exim America, Inc. | CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/...view more CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. view less | |
| CYMEL® 1130 | Allnex | CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for gene...view more CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion and humidity resistance properties. This product is insoluble in water but shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| Impranil® DL 1380 | Covestro | Impranil® DL 1380 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, bags/luggage, fashion she uppers, and shoe lining materials. Special propert...view more Impranil® DL 1380 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, bags/luggage, fashion she uppers, and shoe lining materials. Special properties include high flexibility, good lightfastness, high solid content, soft handle and is suitable for mechanical foaming. This product has a flow time at 23°C (4mmcup) < 90s, a pH values of 6-8, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) 57-61%. view less | |
| Idroben 4913 | Benasedo | Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This product is an oil modified acrylic emulsion. It is a milky white colour, contains a solvent of water and butyl glycol, and has a 42% solids amount. Idroben 4913 has a pH ...view more Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This product is an oil modified acrylic emulsion. It is a milky white colour, contains a solvent of water and butyl glycol, and has a 42% solids amount. Idroben 4913 has a pH level of 8,0-8.5, a viscosity [Brookf.] m Pa.s of < 250, and an MFT of 0℃. view less | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...view more Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. view less | |
| Impranil® DL 1537 | Covestro | Anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, adhesion coats, technical articles, bags/luggage and flocked articles. Special properties include very good resistance to hydrolysis, good adhesion, high solid content, good stirring stability, soft handle and is suitable for mechanical foaming. This product has a pH ...view more Anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, adhesion coats, technical articles, bags/luggage and flocked articles. Special properties include very good resistance to hydrolysis, good adhesion, high solid content, good stirring stability, soft handle and is suitable for mechanical foaming. This product has a pH values of 7 ± 1, a flow time at 23°C (4mmcup) of 15-60, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 57-61. view less | |
| CARBODILITE™ V-04 | GSI Exim America, Inc. | CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch re...view more CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. Properties such as hydrolysis stability, adhesion, water, and chemical resistance are improved. view less | |
| nolax C35.3030 | nolax AG (Vanora) | nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, polyethylene, paper, and coating to coating. nolax C35.3030 can be applied by roll coating or air knife methods, has a density of approximately 1.0 g/cm³, a viscosity of 200 to 1000 mPa•s at 20°C, a pH ...view more nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, polyethylene, paper, and coating to coating. nolax C35.3030 can be applied by roll coating or air knife methods, has a density of approximately 1.0 g/cm³, a viscosity of 200 to 1000 mPa•s at 20°C, a pH value of 7.5 ± 1, and a particle size of approximately 250 nm. view less | |
| COATOSIL* RESIN P 501 | Momentive | CoatOSil Resin P 501 is a medium-hard phenylmethyl silicone resin in solvent that can be used as a binder for anticorrosion coatings with thermal stability up to 600C. The main fields of application are the coating of machine components, fire doors, engin...view more CoatOSil Resin P 501 is a medium-hard phenylmethyl silicone resin in solvent that can be used as a binder for anticorrosion coatings with thermal stability up to 600C. The main fields of application are the coating of machine components, fire doors, engine manifolds, car exhaust silencers, drying units etc. These commonly use one-coat finishes. Systems of this kind are also applied for sealing spray-metallized surfaces. CoatOSil P 501 Resin can also be used for multi-coat finishing systems for industrial plant. view less | |
| COATOSIL* RESIN P 576 | Momentive | CoatOSil* Resin P 576 is a medium-hard high solid phenylmethyl silicone resin in solvent that can be used as a binder for anti-corrosion coatings with thermal stability up to 600C | |
| COATOSIL* RESIN P 851 | Momentive | CoatOsil* Resin P 851 is a phenylmethyl silicone resin in solvent that can be used as a binder for anti corrosion coatings, especially for primers iwth thermal stability up to 600C. | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| Bayhydrol® UH 2558 | Covestro | Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH ...view more Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH (1:3 in demineralised water) value of 7-9. The product is characterized by high resistance to yellowing, very good wet film transparency and very good abrasion resistance (taber), where the films are hard but flexible. Post-curing of such coatings with Bayhydur®, for example, brings additional significant advantages and results in waterborne two-component coatings with significantly higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. Compatibility with affordable PAC dispersions is good but must be tested on a case-by-case basis. view less | |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH ...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| Bayhydrol® UH 2593/1 | Covestro | Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH ...view more Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH (1:2.5in demineralised water) of 7-9. The product was developed specifically for the formulation of one- and two-component wood coating systems. It is characterized by very good wet film transparency, high hardness and good black heel mark resistance. Post-curing of such coatings with Bayhydur® 305 or Bayhydur® 3100, for example, brings additional significant advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener solution is generally 10:1. The product is also suitable for use in a wide range of applications thanks to the combination of good application properties and good compatibility with cost-effective PAC dispersions. view less |
