| ACRIBEN SA 5302 | Benasedo | ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast...view more ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast drying and fast blocking resistant coatings for Joinery, suitable both for interior and exterior applications. view less | |
| ACRODUR® DS 3558 | BASF Dispersions & Resins | ACRODUR DS 3558 is a styrene-acrylic dispersion polymer that provides a tough-elastic thermoset with good flexibility, excellent thermal resistance, and excellent hydrophobicity. For use in nonwoven filtration, abrasives, ceiling tiles, wall coverings, an...view more ACRODUR DS 3558 is a styrene-acrylic dispersion polymer that provides a tough-elastic thermoset with good flexibility, excellent thermal resistance, and excellent hydrophobicity. For use in nonwoven filtration, abrasives, ceiling tiles, wall coverings, and specialty glass applications. view less | |
| Polydo SC-455 | Kukdo Chemical Co., Ltd. | Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer pro...view more Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less | |
| CN120C60 | Sartomer Americas | CN120C60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR351, trimethylol propane triacrylate. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomer's bisphenol A based epoxy acrylates. Performance properties for this product are good adhesion, good chemical resistance, good hardness, good water resistance and high abrasion resistance. Suggested applications include adhesives, binder...view more CN120C60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR351, trimethylol propane triacrylate. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomer's bisphenol A based epoxy acrylates. Performance properties for this product are good adhesion, good chemical resistance, good hardness, good water resistance and high abrasion resistance. Suggested applications include adhesives, binder adhesives, pressure sensitive and structural adhesives, coatings, floor, metal, plastic and paper coatings, electronics, inks, flexo and gravure inks, offset and screen inks and sealants. view less | |
| KRATON® D1189 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1189 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...view more KRATON® D1189 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1189 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. view less | |
| KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...view more KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. view less | |
| KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. view less | |
| KRATON® D1191 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1191 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1191 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. view less | |
| KRATON® D1152 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1152 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1155 ES Polymer | Univar Solutions | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1155 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1157 ES Polymer | Univar Solutions | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
| KRATON® D1157 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1186 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1186 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1186 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1192 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ES Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...view more KRATON® D1192 ES Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D2104 DS-W Polymer | Kraton Polymers International Ltd. | KRATON® D2104 DS-W Polymer is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as dense, white pellets. This product is versatile with a combination of high strength, wide range o...view more KRATON® D2104 DS-W Polymer is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as dense, white pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D2104 DS-W Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| RayCryl® 410 | Specialty Polymers | RayCryl® 410 is a 100% acrylic emulsion designed for blending with cement and concrete products. Specifically designed as a polymer modifier for cement, RayCryl® 410 provides excellent workability, flexibility and compressive strength. It exhibits outstan...view more RayCryl® 410 is a 100% acrylic emulsion designed for blending with cement and concrete products. Specifically designed as a polymer modifier for cement, RayCryl® 410 provides excellent workability, flexibility and compressive strength. It exhibits outstanding pot life under high temperature condition. view less | |
| Polychem 7563-V-60 | OPC Polymers | Polychem 7563-V-60 is a is a clear to slightly hazy vinyl toluene co-polymer with a low-HAP and a VM&P solvent. It is designed for use in primers and enamels, such as floor sealers and equipment enamels, and can be used in aerosols and sanding sealers whe...view more Polychem 7563-V-60 is a is a clear to slightly hazy vinyl toluene co-polymer with a low-HAP and a VM&P solvent. It is designed for use in primers and enamels, such as floor sealers and equipment enamels, and can be used in aerosols and sanding sealers where a lacquer dry is desired. view less | |
| StanChem SC 6125 | StanChem Polymers | StanChem SC 6125 is a vinyl acrylic copolymer emulsion designed for sealants and adhesives. SC 6125 provides excellent adhesion to wood and other surfaces. SC 6125 is an internally plasticized polymer that dries to a very flexible, tack free, water resi...view more StanChem SC 6125 is a vinyl acrylic copolymer emulsion designed for sealants and adhesives. SC 6125 provides excellent adhesion to wood and other surfaces. SC 6125 is an internally plasticized polymer that dries to a very flexible, tack free, water resistant surface. It is readily paintable. view less | Request Sample |
| Aliphatic Urethane Acrylate SU 580 | Soltech Ltd | Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, adhesives for glass, metal coatings, plastic coatings, and screen ink binders. Aliphatic Urethane Acrylate SU 580 is 100% polymer...view more Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, adhesives for glass, metal coatings, plastic coatings, and screen ink binders. Aliphatic Urethane Acrylate SU 580 is 100% polymer solid by weight with an mPa.s viscosity of 13,000-19,000 at 60℃. view less | |
| Paracryl® PC-8477 | Royal Coatings & Specialty Polymers (Para-Chem) | Paracryl® PC-8477, a non-film forming polymer, is an economical ink and overprint vehicle. This product is used in paper and board ink applications. | |
| Resiflow® L-3075 | Estron Chemical, Inc. | Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellen...view more Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellent air release, improved film characteristics, and resistance to dirt-pick up. view less | |
| Resinate-777 | D.S.V. Chemicals Pvt. Ltd. | Resinate-777 is a zinc-calcium polymer. This product has a melting point range of 105-115 degrees Celsius. It can be used as a tackifier, and in low printing inks for absorbent stocks, paints, and economical liquid inks. | |
| PEO-1 | Sumitomo Seika America, Inc. | PEO-1 is a nonionic water-soluble thermoplastic polymer. PEO-1 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-2 | Sumitomo Seika America, Inc. | PEO-2 is a nonionic water-soluble thermoplastic polymer. PEO-2 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-3 | Sumitomo Seika America, Inc. | PEO-3 is a nonionic water-soluble thermoplastic polymer. PEO-3 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-4 | Sumitomo Seika America, Inc. | PEO-4 is a nonionic water-soluble thermoplastic polymer. PEO-4 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-8 | Sumitomo Seika America, Inc. | PEO-8 is a nonionic water-soluble thermoplastic polymer. PEO-8 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| KRATON® D1186 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1186 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1186 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| Rovene® 6026 | Mallard Creek Polymers, Inc. | Rovene® 6026 is a versatile polymer that can be used in multiple paint and coatings applications. It can be formulated for interior paints, outdoor landscaping coatings, or coatings for metal. | |
| Polydo ST-481 | Kukdo Chemical Co., Ltd. | Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation pre-polymer...view more Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation pre-polymer process. view less | |
| LS1-6140 | NuSil Silicone Technology 1 | LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that ...view more LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that require a low volatility silicone to avoid contamination. view less | |
| UCECOAT® 2806 | Allnex | UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean particle size associated with an excellent colloidal stability alone and in the presence of pigments. Its polymer composition was optimized for high reactivity as well as low migration potential. It contains essentially oligomers and polymer...view more UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean particle size associated with an excellent colloidal stability alone and in the presence of pigments. Its polymer composition was optimized for high reactivity as well as low migration potential. It contains essentially oligomers and polymers having a molecular weight above 500 Daltons with acrylic double bound functionality equal to or greater than 6. It is easily water redispersible and tacky after water evaporation but before cure. view less | Request Sample |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...view more Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. view less | |
| RHOPLEX AC-630 | Univar Solutions | RHOPLEX AC-630 is an all-acrylic polymer designed for tough, water-resistant sealers. These coatings are commonly factory-applied to retard efflorescence of cured cementitious products formed in plants under controlled conditions. Typical applications inc...view more RHOPLEX AC-630 is an all-acrylic polymer designed for tough, water-resistant sealers. These coatings are commonly factory-applied to retard efflorescence of cured cementitious products formed in plants under controlled conditions. Typical applications include roofing tiles and other precast construction products. view less | Request Sample |
| RHOPLEX MC-1834P | Univar Solutions | RHOPLEX MC-1834P is a low-odor acrylic polymer emulsion designed for modifying Portland cement compositions. It also can be used as a latex bonding agent to enhance adhesion of new concrete to existing concrete. It is especially useful for applications wi...view more RHOPLEX MC-1834P is a low-odor acrylic polymer emulsion designed for modifying Portland cement compositions. It also can be used as a latex bonding agent to enhance adhesion of new concrete to existing concrete. It is especially useful for applications with thin sections, excessive vibration and heavy traffic. view less | Request Sample |
| KRATON™ MD6684 GS-N | Univar Solutions | KRATON™ MD6684 GS-N is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass and 1% maleic anhydride. It is used as a modifier of polymers and as an ingredient in formulating compounds for foot...view more KRATON™ MD6684 GS-N is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass and 1% maleic anhydride. It is used as a modifier of polymers and as an ingredient in formulating compounds for footwear, adhesives, sealants and coatings. view less | Request Sample |
| RayFlex® 2044L | Specialty Polymers | RayFlex® 2044L is a very soft acrylic emulsion polymer designed for dust capture and holding through proper dry-tack performance in high loft air filtration media. RayFlex® 2044L improves fiber-to-fiber bonding and adjustable tack levels through blending. | |
| SEA-F130H | DKSH | SEA-F130H is bisphenol F based acrylate epoxy oligomer. It is applicable to uv dual hybrid curable systems and can be adopted the method of mixing the two kinds of oligomers and made the interpenetrating polymer network (IPN) by dual curing. | Request Sample |
| SEA-F150H | DKSH | SEA-F150H is bisphenol F based acrylate epoxy oligomer. It is applicable to uv dual hybrid curable systems and can be adopted the method of mixing the two kinds of oligomers and made the interpenetrating polymer network (IPN) by dual curing. | Request Sample |
| SEA-F170H | DKSH | SEA-F170H is bisphenol F based acrylate epoxy oligomer. It is applicable to uv dual hybrid curable systems and can be adopted the method of mixing the two kinds of oligomers and made the interpenetrating polymer network (IPN) by dual curing. | Request Sample |
| CYMEL® U-65 | Allnex | CYMEL® U-65 resin is a high solids, methylated urea resin designed for use in both water and solvent-borne systems as a crosslinking agent for a variety of polymers that contain hydroxyl functionality. | Request Sample |
| KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...view more KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| SILRES® 603 | Wacker Chemical Corporation | SILRES® 603 is a solid silicone resin containing phenyl groups and exhibiting good compatibility with organic polymers. It is used as base material for heat resistant powder coatings with above average gloss retention during heating. For heat resistant an...view more SILRES® 603 is a solid silicone resin containing phenyl groups and exhibiting good compatibility with organic polymers. It is used as base material for heat resistant powder coatings with above average gloss retention during heating. For heat resistant and black pigmented powder coatings it is advisable to blend SILRES® 603 with orgnic binders for powder coatings and to add heat resistant pigments. SILRES® 603 is applied in applications such as coatings, metal coatings, heat-resistant coatings, powder coatings view less | Request Sample |
| Paracryl® PC-8453 | Royal Coatings & Specialty Polymers (Para-Chem) | Paracryl® PC-8453 is a polymer used as an overprint vehicle for gloss, clarity, and rub resistance. This product can be used in paper and board ink applications. | |
| AB-1277 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-1277, in the form of a milky liquid, is a unique blend of acrylic polymers and polyurethane (base coat) for all types of leather finishes. It has good abrasion resistance, flexibility, cold crack resistance, water resistance, and more. | |
| Dynasylan® HYDROSIL 1153 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasyla...view more Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1153 contains about 85% active silane content in water. view less | |
| KRATON® D1155 JOP Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and ...view more KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JOP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1155 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...view more KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1184 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1184 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1184 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1186 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1186 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| VINNAPAS® EP 1 | Wacker Chemical Corporation | VINNAPAS® EP 1 is a plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It is used in adhesives for paper packaging and PVC furniture foil adhesives and adheres well to various plastic surfaces. VINNAPAS® EP 1 is app...view more VINNAPAS® EP 1 is a plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It is used in adhesives for paper packaging and PVC furniture foil adhesives and adheres well to various plastic surfaces. VINNAPAS® EP 1 is applied in coatings. view less | Request Sample |
| WorléeCryl® 7107 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7107 is a very hard methacrylic copolymer emulsion supplied as 40% in water. It improves the surface properties in water soluble lacquer systems, and it has excellent compatibility with other polymer emulsion. This product effects improvement ...view more WorléeCryl® 7107 is a very hard methacrylic copolymer emulsion supplied as 40% in water. It improves the surface properties in water soluble lacquer systems, and it has excellent compatibility with other polymer emulsion. This product effects improvement in film hardness, sanding, blocking resistance and stackability. view less | |
| Polydo DP-1000 | Kukdo Chemical Co., Ltd. | Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. ...view more Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. view less | |
| Polydo SC-357 | Kukdo Chemical Co., Ltd. | Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer...view more Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less | |
| Polydo SC-381 | Kukdo Chemical Co., Ltd. | Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer...view more Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less | |
| Polydo SC-400 | Kukdo Chemical Co., Ltd. | Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the preparation pre-polymer...view more Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the preparation pre-polymer process. view less | |
| RHOPLEX MC-76 | Univar Solutions | RHOPLEX MC-76 is It cement modifier can be used in both sprayable and patching mortar applications. This acrylic polymer is designed for sprayable cementitious compositions – like exterior insulation and finish systems (EIFS) basecoats and adhesives and s...view more RHOPLEX MC-76 is It cement modifier can be used in both sprayable and patching mortar applications. This acrylic polymer is designed for sprayable cementitious compositions – like exterior insulation and finish systems (EIFS) basecoats and adhesives and sprayable stucco-type coatings – and can be applied over a variety of surfaces. view less | Request Sample |
| SEPOLSION G515 | Sumitomo Seika America, Inc. | SEPOLSION G515 is a water-based emulsion of olefin polymer copolymerized with ethylene and glycidyl methacrylate. SEPOLSION G515 shows excellent adhesion to various substrates (glass, paper, plastic, metal, etc.) due to its highly reactive epoxy group. | |
| Resinate-776 | D.S.V. Chemicals Pvt. Ltd. | Resinate-776 is a calcium-based polymer. This product has a melting point range of 85-95 degrees Celsius. It can be used as a tackifier. It can also be used in low printing inks for absorbent stocks, paints, and economical liquid inks. | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| RayVace® 1724 | Specialty Polymers | RayVace® 1724 is a hard vinyl acetate acrylic emulsion polymer designed for use as a fabric stiffener. Suggested for use in pleated blinds, as a fabric stiffener, and a fabric stabilizer. Key features include self crosslinking, hard free film, and imparts...view more RayVace® 1724 is a hard vinyl acetate acrylic emulsion polymer designed for use as a fabric stiffener. Suggested for use in pleated blinds, as a fabric stiffener, and a fabric stabilizer. Key features include self crosslinking, hard free film, and imparts dimensional stability. view less | |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...view more FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. view less | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...view more FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. view less | |
| LAROMER® PO 8967 | BASF Dispersions & Resins | LAROMER PO 8967 is a polyether-modified acrylate oligomer. It is lower viscosity version of LAROMER PO 43 F, which shows a very balanced property profile and can be used as a sole binder in UV energy curable formulations for a variety of applications. LAR...view more LAROMER PO 8967 is a polyether-modified acrylate oligomer. It is lower viscosity version of LAROMER PO 43 F, which shows a very balanced property profile and can be used as a sole binder in UV energy curable formulations for a variety of applications. LAROMER PO 8967 is recommended for use in energy curable flexo, screen, and offset inks and overprint varnishes. Cured inks and overprint varnishes formulated with LAROMER PO 8967 exhibit resistance to chemicals and provide good surface hardness in combination with Lucirin® TPO, Lucirin TPO-L and Benzophenone. view less | |
| Rosin Pentaerythrite Ester - 145 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kind...view more Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kinds of adhesive. view less | |
| Hauthane L-2020 | Hauthaway | Hauthane L-2020 is a low cost, co-solvent free, aromatic, polyether-based, polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point propert...view more Hauthane L-2020 is a low cost, co-solvent free, aromatic, polyether-based, polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. L-2020 may be spray or pad bathed as supplied. It may be thickened for knife- over-roll or similar methods. view less | |
| Polydo SC-4508 | Kukdo Chemical Co., Ltd. | Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer...view more Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less | |
| SETATHANE® D E 2767 | Allnex | SETATHANE® D E 2767 is a Polyol emulsion used in combination with aromatic polyisocyanates based on diphenylmethane diisocynate as binder for solvent-free two component polyurethane coatings with high chemical resistance for concrete and other porous subs...view more SETATHANE® D E 2767 is a Polyol emulsion used in combination with aromatic polyisocyanates based on diphenylmethane diisocynate as binder for solvent-free two component polyurethane coatings with high chemical resistance for concrete and other porous substrates, fillers, sealing compounds and synthetic resin mortars. view less | Request Sample |
| RHOPLEX™ WL-81 | Univar Solutions | RHOPLEX™ WL-81 is a thermoplastic, waterborne, acrylic polymer is specifically designed for clear and pigmented ambient or forced-air-dry industrial lacquers. It is suitable for use on a variety of substrates and offering benefits currently provided by so...view more RHOPLEX™ WL-81 is a thermoplastic, waterborne, acrylic polymer is specifically designed for clear and pigmented ambient or forced-air-dry industrial lacquers. It is suitable for use on a variety of substrates and offering benefits currently provided by solventborne industrial lacquers, but without the flammability, odor, or other problems inherent with such systems. view less | Request Sample |
| RHOPLEX™ WL-96 | Univar Solutions | RHOPLEX™ WL-96 is a waterborne acrylic polymer used for low-VOC, brush-applied, interior clear wood finishes. It is well suited for finishing wood trim, doors, walls and floors. Formulation blends with polyurethane dispersions enhance hardness, stain and ...view more RHOPLEX™ WL-96 is a waterborne acrylic polymer used for low-VOC, brush-applied, interior clear wood finishes. It is well suited for finishing wood trim, doors, walls and floors. Formulation blends with polyurethane dispersions enhance hardness, stain and chemical resistance, and other performance characteristics. view less | Request Sample |
| TMPTA | Allnex | TMPTA (TRIMETHYLOLPROPANE TRIACRYLATE) is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance. It is a cost effe...view more TMPTA (TRIMETHYLOLPROPANE TRIACRYLATE) is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance. It is a cost effective diluent compatible with the wide range of acrylated resins used in radiation curing applications. view less | Request Sample |
| Texicryl® 13-814 | Scott Bader | Texicryl® 13-814 is a soft polymer with excellent water barrier properties for OPV’s and inks. Heat sealable. Very low Cobb value. Low slip coefficient. | |
| Rovene® 6133 | Mallard Creek Polymers, Inc. | Rovene® 6133 is designed to work in a variety of coatings applications including interior, exterior, clear or pigmented. This polymer exhibits excellent water resistance, strength, and adhesion to multiple substrates. | |
| UROTUF® F102-W-36 | Polynt Composites | UROTUF® F102-W-36 is an anionic dispersion of a water-borne oil modified urethane polymer provided at 36% solids in water. This resin is similar to UROTUF® F100-W-36, provided solvent free, but has a metallic drier already incorporated for convenience. | |
| SiSiB® PC5310 | SiSiB SILICONES | SiSiB® PC5310 is a clear, colourless, caustic and highly flammable liquid with a pungent odour. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used as coatings for silicon and glass surfaces, or in the production of silicone (polysiloxane) polymer...view more SiSiB® PC5310 is a clear, colourless, caustic and highly flammable liquid with a pungent odour. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used as coatings for silicon and glass surfaces, or in the production of silicone (polysiloxane) polymers. view less | |
| HIKOREZ H-2300 | Kolon | HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...view more HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. view less | |
| ACRIBEN SA 338 | Benasedo | ACRIBEN SA 338 is a self crosslinking acrylic polymer endowed with very good transparency, good chemical resistance, and non-yellowing properties. It is suitable to formulate fast drying clear and pigmented water based top-coats for furniture. | |
| FS1-3730 | NuSil Silicone Technology 1 | FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond ...view more FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond aggressively to most surfaces. view less | |
| DICAP® 2020 Acid Functional Saturated Polyester Polyol | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DICAP® 2020 Acid Functional Saturated Polyester Polyol is a linear saturated polyester diol with a pendant carboxylic functional group. The OH terminated polyester chains are DMPA® Dimethylolpropionic acid initiated polycaprolactone. The combination of both hydroxyl and carboxyl functionality produces unique benefits and versatility. The acid group promotes water dispersability of the resin after neutralisation with a base or can improve adhesion to difficult substrates. This product has a melting point (DSC) of 59.3°C, a non-volatile content of 99% wt. min., a viscosity @ 60°C of 800-1000cP, and an acid equivalent weight of 935-1122g/eqv. Since no DMPA is required to formulate water dispersible pre-polymers, NMP may be reduced or eliminated from the formulations. Pre-polymers formulated with DICAP® products have very good solubility in monomers for hybrid applications and in acetone for solvent-free PUDs. Depending on the molecular weight of the DICAP® polyol and the formulating technique, hard films can be formulated for durable coatings or soft urethane polymer...view more DICAP® 2020 Acid Functional Saturated Polyester Polyol is a linear saturated polyester diol with a pendant carboxylic functional group. The OH terminated polyester chains are DMPA® Dimethylolpropionic acid initiated polycaprolactone. The combination of both hydroxyl and carboxyl functionality produces unique benefits and versatility. The acid group promotes water dispersability of the resin after neutralisation with a base or can improve adhesion to difficult substrates. This product has a melting point (DSC) of 59.3°C, a non-volatile content of 99% wt. min., a viscosity @ 60°C of 800-1000cP, and an acid equivalent weight of 935-1122g/eqv. Since no DMPA is required to formulate water dispersible pre-polymers, NMP may be reduced or eliminated from the formulations. Pre-polymers formulated with DICAP® products have very good solubility in monomers for hybrid applications and in acetone for solvent-free PUDs. Depending on the molecular weight of the DICAP® polyol and the formulating technique, hard films can be formulated for durable coatings or soft urethane polymers can be formulated for coating textiles and leathers. DICAP® products can be used in compliance with 21CFR 175.105 for indirect contact with food. view less | |
| Paracryl® PC-8340 | Royal Coatings & Specialty Polymers (Para-Chem) | Paracryl® PC-8340 is a paracryl paper & board vehicles polymer. This product is used in water based inks and coatings for calendared paper and board as well as metallized substrates. | |
| TACOLYN 1070 | Univar Solutions | TACOLYN 1070 is an aqueous, 55% solids, solvent-free, anionic hydrocarbon dispersion. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction adhesive applications by enhancing adhesion to polyolefin substrates an...view more TACOLYN 1070 is an aqueous, 55% solids, solvent-free, anionic hydrocarbon dispersion. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction adhesive applications by enhancing adhesion to polyolefin substrates and recycled corrugated board. It promotes cohesive strength and offers good moisture resistance when used in pressure sensitive adhesives. view less | Request Sample |
| Bitoner® Resin LH-3100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications...view more Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. view less | |
| WorléeCryl 8263 | Worlée-Chemie G.m.b.H. | WorléeCryl 8263 is a styrene-acrylate dispersion, DMEA-neutralised. It is suitable for the manufacture of heat resistant and high gloss printing inks and coatings. Especially remarkable is the high heat-seal strength at low Tg of the polymer. Overprint va...view more WorléeCryl 8263 is a styrene-acrylate dispersion, DMEA-neutralised. It is suitable for the manufacture of heat resistant and high gloss printing inks and coatings. Especially remarkable is the high heat-seal strength at low Tg of the polymer. Overprint varnishes can be formulated solvent-free with W´Cryl 8263. view less | |
| SiSiB® PC5210 | SiSiB SILICONES | SiSiB® PC5210 is a colorless clear liquid. It is a group of reactive, chlorine-containing silicon compounds, used in many chemical processes. It reacts with water to produce hydrogen chloride. It can be used as coatings for silicon and glass surfaces or in the production of silicone (polysiloxane) polymer...view more SiSiB® PC5210 is a colorless clear liquid. It is a group of reactive, chlorine-containing silicon compounds, used in many chemical processes. It reacts with water to produce hydrogen chloride. It can be used as coatings for silicon and glass surfaces or in the production of silicone (polysiloxane) polymers. view less | |
| RHOPLEX™ 2500 | Univar Solutions | RHOPLEX™ 2500 is an all-Acrylic Emulsion Polymer that is designed for tough, water-resistant masonry paints and primers. It possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), the ...view more RHOPLEX™ 2500 is an all-Acrylic Emulsion Polymer that is designed for tough, water-resistant masonry paints and primers. It possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), the ability to retard efflorescence in cured cementitious products and high pigment-binding capacity. view less | Request Sample |
| RayFlex® 118 | Specialty Polymers | RayFlex® 118 is a high solids, high performance, all acrylic emulsion polymer specifically designed for wall mastic, caulks, and sealants, and roof coating applications. Coatings formulated with RayFlex® 118 have outstanding elongation and flexibility. Ra...view more RayFlex® 118 is a high solids, high performance, all acrylic emulsion polymer specifically designed for wall mastic, caulks, and sealants, and roof coating applications. Coatings formulated with RayFlex® 118 have outstanding elongation and flexibility. RayFlex® 118 also provides excellent adhesion and water resistance. view less | |
| Boltorn™ U3000 | Perstorp | Boltorn™ U3000 is an air-drying, yellow liquid dendritic polymer with a high concentration of unsaturation. The branched structure of Boltorn™ U3000 provides unique flow properties, which allows woodstains and alkyd paints for outdoor applications to comp...view more Boltorn™ U3000 is an air-drying, yellow liquid dendritic polymer with a high concentration of unsaturation. The branched structure of Boltorn™ U3000 provides unique flow properties, which allows woodstains and alkyd paints for outdoor applications to comply with recent VOC demands while still securing rapid drying and durability. view less | |
| HIKOREZ T-2093 | Kolon | HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer...view more HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. view less | |
| HIKOREZ H-2200 | Kolon | HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...view more HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. view less | |
| Tylac® 4190 | Mallard Creek Polymers, Inc. | Tylac® 4190 is a styrene-butadiene emulsion. It is recommended for use in concrete, mortars, grouts, and cement mixtures. This product is suggested as a polymer modifier for hydraulic cement mixtures or tile mortar adhesives. | |
| NE-721FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | NE-721FD, in the form of a clear anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane polymer with good stain resistance, tensile strength, abrasion resistance, toughness. It is applicable in topcoats and base coats for all types of ...view more NE-721FD, in the form of a clear anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane polymer with good stain resistance, tensile strength, abrasion resistance, toughness. It is applicable in topcoats and base coats for all types of leather finishes. view less | |
| RAYKOTE® 1446G | Specialty Polymers, Inc. | RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for pr...view more RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for primer applications. view less | |
| Baymod® PU-MOD | Rhein Chemie Rheinau GmbH | Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Appearing as a white powder, this plasticizing polymer functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery,...view more Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Appearing as a white powder, this plasticizing polymer functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery, and bags and shoes. view less | |
| Ultrafine™ 5W A | Lawter | Ultrafine™ 5W A is a micronized polytetrafluoroethylene powder to help coatings and inks attain their highest rub resistance and lowest C.O.F. The wax can be used with other polymers for the most effective balance of cost versus performance. Ultrafine™ 5W...view more Ultrafine™ 5W A is a micronized polytetrafluoroethylene powder to help coatings and inks attain their highest rub resistance and lowest C.O.F. The wax can be used with other polymers for the most effective balance of cost versus performance. Ultrafine™ 5W A is used in ink and coating formulations. view less | |
| Resiflow® LV-67 | Estron Chemical, Inc. | Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1....view more Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best processing method and the optimum concentration of the additive. view less | |
| AFCONA - 1503 | AFCONA Additives Sdn Bhd | AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of ...view more AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of tinting systems where low shear force is used, and in systems with a wide pH range. AFCONA - 1503 finds application in water- and solvent-based decorative paint systems. view less | |
| TACOLYN 3100 | Univar Solutions | TACOLYN 3100 is an aqueous, 55% solids, solvent-free, highly hydrogenated rosin ester dispersion prepared from the pentaerythritol ester of hydrogenated rosin. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and constructi...view more TACOLYN 3100 is an aqueous, 55% solids, solvent-free, highly hydrogenated rosin ester dispersion prepared from the pentaerythritol ester of hydrogenated rosin. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications including clear film label applications, along with high temperature performance in waterborne PSAs. view less | Request Sample |
