| Resiflow® P-67 | Estron Chemical, Inc. | Resiflow® P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries. This applies to chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. This product is base...view more Resiflow® P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries. This applies to chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. This product is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow® P-67 has a broad compatibility between powder coatings, which is another key characteristic of it. view less | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| Isocryl® EP-575 | Estron Chemical, Inc. | Isocryl® EP-575 is a glycidyl-functional acrylic co-polymer designed for use as a hardener capable of producing matte exterior-durable polyester powder coatings. These coatings have impact and chemical resistance compared to previous generations of acryli...view more Isocryl® EP-575 is a glycidyl-functional acrylic co-polymer designed for use as a hardener capable of producing matte exterior-durable polyester powder coatings. These coatings have impact and chemical resistance compared to previous generations of acrylic matting hardeners. Isocryl® EP-575's additional benefits include smooth cured film appearance and low contamination characteristics. view less | |
| Resiflow® PL-220 | Estron Chemical, Inc. | Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple binder...view more Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® PL-210 | Estron Chemical, Inc. | Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance across the spectrum of binder...view more Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® PL-200 | Estron Chemical, Inc. | Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its suitability and reliable performance across the spectrum of binder...view more Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its suitability and reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® PF-67 | Estron Chemical, Inc. | Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PF-67 into powder coating formulations. This product is best suited for hybrid technology, but can be used in other binder...view more Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PF-67 into powder coating formulations. This product is best suited for hybrid technology, but can be used in other binder systems such polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® P-66F | Estron Chemical, Inc. | Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier....view more Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-66F shows a marked improvement in clarity in non-pigmented polyester-TGIC systems compared to classical flow control agents. view less | |
| Resiflow® PL-200A | Estron Chemical, Inc. | Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and E...view more Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PL-200A into pigmented powder coating formulations. view less | |
| Resiflow® P-65F | Estron Chemical, Inc. | Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier...view more Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-65F shows a marked improvement in clarity in non-pigmented hybrid and epoxy systems compared to a classical flow control agent, such as Resiflow® P-67. view less | |
| Resiflow® P-64F | Estron Chemical, Inc. | Resiflow® P-64F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-64F which has been converted into free-flowing powder by adsorption onto silica-type carrier....view more Resiflow® P-64F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-64F which has been converted into free-flowing powder by adsorption onto silica-type carrier. Resiflow® P-64F provides unique characteristics in a variety of powder coating formulations. In isocryl H-1871 formulations it is a key ingredient in one-shot, low to mid-gloss formulations.In PE-TGIC, hybrid and epoxy clearcoats it provides a balance of flow and clarity. In GMA Acrylic-DDDA clearcoat formulations it provides recoatability, clarity and appearance. In classical, pigmented powder coatings, Resiflow® P-64F enhances pigment wetting and displaces substrate moisture. view less | |
| Resiflow® CP-77 | Estron Chemical, Inc. | Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the co...view more Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the contaminated flakes or powder, premixed, reextruded, and then further processed in the conventional manner. Bits or protrusions are unlikely to be remediated by reprocessing, and Resiflow® CP-77 may obviate that type of surface defect. view less | |
| Resiflow® P-37 | Estron Chemical, Inc. | Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other c...view more Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other components during extrusion, and this results in a uniform system. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P-37 into powder coating formulations. view less |
