| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...view more 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). view less | |
| ACRODUR® 950 L | BASF Dispersions & Resins | ACRODUR 950 L is a solution polymer for thermoset nonwoven applications that provides excellent heat resistance and stiffness. It is recommended for use in insulation, abrasives, ceiling tiles, wall coverings, and specialty glass applications. This produc...view more ACRODUR 950 L is a solution polymer for thermoset nonwoven applications that provides excellent heat resistance and stiffness. It is recommended for use in insulation, abrasives, ceiling tiles, wall coverings, and specialty glass applications. This product can be used as a crosslinker. view less | |
| ACRODUR® DS 3515 | BASF Dispersions & Resins | ACRODUR DS 3515 is a dispersion polymer for thermoset nonwoven applications that provides excellent thermal stability, flex modulus, and hydrophobicity. For use in coated abrasives and abrasive nonwovens, insulation, ceiling tiles, wall coverings, and spe...view more ACRODUR DS 3515 is a dispersion polymer for thermoset nonwoven applications that provides excellent thermal stability, flex modulus, and hydrophobicity. For use in coated abrasives and abrasive nonwovens, insulation, ceiling tiles, wall coverings, and specialty glass applications. view less | |
| ACRODUR® DS 3530 | BASF Dispersions & Resins | ACRODUR DS 3530 is a thermosetting solution polymer with low viscosity that provides excellent thermal stability and stiffness for nonwovens. For use in insulation, ceiling tiles, and specialty glass applications. | |
| ACRODUR® DS 3558 | BASF Dispersions & Resins | ACRODUR DS 3558 is a styrene-acrylic dispersion polymer that provides a tough-elastic thermoset with good flexibility, excellent thermal resistance, and excellent hydrophobicity. For use in nonwoven filtration, abrasives, ceiling tiles, wall coverings, an...view more ACRODUR DS 3558 is a styrene-acrylic dispersion polymer that provides a tough-elastic thermoset with good flexibility, excellent thermal resistance, and excellent hydrophobicity. For use in nonwoven filtration, abrasives, ceiling tiles, wall coverings, and specialty glass applications. view less | |
| ACRONAL® 296 D NA | BASF Dispersions & Resins | ACRONAL 296 D NA is an aqueous butyl acrylate-styrene copolymer dispersion used to produce all types of adhesives, coatings, textured finishes, and surfacing compounds. It is used for producing high-gloss to flat coatings for application on plaster, mason...view more ACRONAL 296 D NA is an aqueous butyl acrylate-styrene copolymer dispersion used to produce all types of adhesives, coatings, textured finishes, and surfacing compounds. It is used for producing high-gloss to flat coatings for application on plaster, masonry, fibrous cement, concrete, and other indoor and outdoor substrates. Moreover, its high pigment binding capacity makes ACRONAL 296 D NA an ideal candidate for textured coatings and masonry paints. The high pigment binding capacity allows ACRONAL 296 D NA to replace vinyl acrylics in many applications with improved performance at the same formulated cost. view less | |
| ACRONAL® 4040 | BASF Dispersions & Resins | ACRONAL 4040 is a styrene-acrylic copolymer designed for water-based concrete cure and seal coatings to deliver both benefits of a curing agent and sealer in a single coating application. ACRONAL 4040 can be formulated into fast drying coatings which then...view more ACRONAL 4040 is a styrene-acrylic copolymer designed for water-based concrete cure and seal coatings to deliver both benefits of a curing agent and sealer in a single coating application. ACRONAL 4040 can be formulated into fast drying coatings which then exhibit excellent water retention (according to ASTM C 1315), alkali and acid resistance, strong adhesion to concrete, and excellent final coating appearance. view less | |
| ACRONAL® 4311 X | BASF Dispersions & Resins | ACRONAL 4311 X is an acrylic dispersion for translucent sealants meeting ASTM C 290 performance. It imparts superior water resistance. | |
| ACRONAL® NS 567 | BASF Dispersions & Resins | ACRONAL NS 567 is an acrylic dispersion for economical elastomeric white roof coatings. Provides high strength, elongation, and good dirt pick-up resistance. | |
| ACRONAL® NX 4627 X | BASF Dispersions & Resins | ACRONAL NX 4627 X is a neutral styrene acrylic copolymer designed to be used in anionic or cationic asphalt emulsion applications such as fog seals or reduced tracking bond coats. It is APEO and ammonia free. | |
| ACRONAL® NX 4787 | BASF Dispersions & Resins | ACRONAL NX 4787 is an all purpose styrene acrylic used in adhesives, primers and coatings. It provides high strength, adhesion and water/alkali resistance. This product has low viscosity and is non-APEO. | |
| ACRONAL® S 400 NA | BASF Dispersions & Resins | ACRONAL S 400 NA is an acrylic dispersion offering excellent crack bridging performance for flexible cementitious roof coatings. | |
| ACRONAL® S 760 NA | BASF Dispersions & Resins | ACRONAL S 760 NA is an acrylic dispersion for use in corrosion resistant primers and coatings. Provides excellent water and alkali resistance. | |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...view more Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. view less | |
| Akuabrid HM 1153 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 1153 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 2124 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 2124 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 4001 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 4001 is a high modulus, solvent-free, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good water resistance and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 6552A | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ide...view more Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. view less | |
| Akuabrid HM 6560 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...view more Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. view less | |
| Akuabrid HM 6574 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...view more Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. view less | |
| Akuabrid HS 019 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 019 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid HS 070 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 070 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...view more Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. view less | |
| AR-511 | Chan Sieh Enterprises Co, Ltd. | AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromat...view more AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromatics, and esters. view less | |
| AR-514 | Chan Sieh Enterprises Co, Ltd. | AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aroma...view more AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aromatics, and esters. view less | |
| AR-517 | Chan Sieh Enterprises Co, Ltd. | AR-517 is a styrene-acrylic copolymer resin that displays good hardness, high gloss, and good chemical resistance. This product can be used in paints and coatings for road marking, marine, concrete, and interior and exterior wall applications. | |
| AR-518 | Chan Sieh Enterprises Co, Ltd. | AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters. | |
| Aromatic Urethane Hexaacrylate SM6329 | Jiangsu Sanmu Group Corporation | SM6329 is an aromatic urethane hexaacrylate. It offers high reactivity and hardness, and provides abrasion and chemical resistance. SM6329 is widely used in UV coatings, adhesives and inks. | |
| BarrierPro® 4545 | Mallard Creek Polymers, Inc. | BarrierPro® 4545 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4545 can be compounded with fillers and other additives to form coatings for a variety of applica...view more BarrierPro® 4545 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4545 can be compounded with fillers and other additives to form coatings for a variety of applications. Because of its high strength film, it makes an excellent product for blending with other BarrierPro® products to strengthen waterproof membranes, specialty paints, and sealants. view less | |
| BarrierPro® 4550 | Mallard Creek Polymers, Inc. | BarrierPro® 4550 is a general purpose latex binder of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4550 can be compounded with fillers and other additives to form coatings for a variety of applications su...view more BarrierPro® 4550 is a general purpose latex binder of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4550 can be compounded with fillers and other additives to form coatings for a variety of applications such as damp proof membranes, specialty paints and sealants. view less | |
| BarrierPro® 4551 | Mallard Creek Polymers, Inc. | BarrierPro® 4551 is a carboxylated styrenebutadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro® 4551 has excell...view more BarrierPro® 4551 is a carboxylated styrenebutadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro® 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro® 4551 is also a good base polymer for blending with other BarrierPro® products to allow a membrane to be custom tailored to a specific strength and/or flexibility need. view less | |
| BarrierPro® 4555 | Mallard Creek Polymers, Inc. | BarrierPro® 4555 is a general purpose latex binder of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for damp proofing where films must remain flexible at below freezing temperatures. | |
| Baybond® 140 AQ | Covestro | Baybond® 140 AQ has anionic dispersion of an aliphatic polyester urethane resin used as a film-building component in glass fiber sizings. Its polyurethane dispersion is suitable for use as a film-building component in glass fiber sizings. As with any prod...view more Baybond® 140 AQ has anionic dispersion of an aliphatic polyester urethane resin used as a film-building component in glass fiber sizings. Its polyurethane dispersion is suitable for use as a film-building component in glass fiber sizings. As with any product, use of Baybond® 140 AQ in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 130 | Covestro | Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...view more Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 330 | Covestro | Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. G...view more Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent filmforming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 401 A | Covestro | Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have ex...view more Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have excellent film-forming properties and very good adhesion. As with any product, use of Baybond® PU 401 A polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 402 A | Covestro | Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based o...view more Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 402 A are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. Baybond® PU 402 A is also very stable against shear forces. As with any product, use of Baybond® PU 402 A in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability view less | |
| Baybond® PU 403 | Covestro | Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond...view more Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond PU® 403 have excellent film-forming properties, and very good adhesion. The mechanical properties of Baybond® PU 403 are improved by post-curing at 150ºC or above for 30 minutes. As with any product, Baybond® PU 403 polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Bayhydrol® U 355 | Covestro | Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion used as a binder for the formulation of water-thinnable soft-feel coatings. | |
| Bayhydrol® U 475 | Covestro | Bayhydrol® U 475 is an aliphatic, hydroxyfunctional polyester polyurethane resin used as a binder for the formulation of water-thinnable soft-touch coatings. | |
| BECKOSOL AQ® 510 | Polynt Composites | BECKOSOL AQ® 510, in the form of a milky white liquid, is an oil-based alkyd/acrylic copolymer hybrid that can be used in architectural primers and a range of architectural enamels from satin to semi-gloss styles. This product has good enamel hold out, is...view more BECKOSOL AQ® 510, in the form of a milky white liquid, is an oil-based alkyd/acrylic copolymer hybrid that can be used in architectural primers and a range of architectural enamels from satin to semi-gloss styles. This product has good enamel hold out, is solvent free, and will formulate like a latex resin with soap and water cleanup. view less | |
| Betapag | Grupo Petroquimico Beta SA de CV | Betapag is a commercial brand of polyalkyleneglycols (PAG) from Group Petrochemical Beta. The polyalkyleneglycols are copolymers from EO and PO that are used in the industry for synthetic lubricants that offer high quality lubrication, high viscosity con...view more Betapag is a commercial brand of polyalkyleneglycols (PAG) from Group Petrochemical Beta. The polyalkyleneglycols are copolymers from EO and PO that are used in the industry for synthetic lubricants that offer high quality lubrication, high viscosity contents and good stability to temperature. view less | |
| Betapag D | Grupo Petroquimico Beta SA de CV | Betapag D is a commercial brand of polyalkyleneglycols (PAG) from Group Petrochemical Beta. The polyalkyleneglycols are copolymers from EO and PO that are used in the industry for synthetic lubricants that offer high quality lubrication, high viscosity co...view more Betapag D is a commercial brand of polyalkyleneglycols (PAG) from Group Petrochemical Beta. The polyalkyleneglycols are copolymers from EO and PO that are used in the industry for synthetic lubricants that offer high quality lubrication, high viscosity contents and good stability to temperature. view less | |
| Bitoner® Resin TR-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended appli...view more Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. view less | |
| Bitoner® Resin TR-2080 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended app...view more Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. view less | |
| Borchi® Gen 1252 | Borchers, A Company of OMG | Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for prep...view more Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous and solventborne pigment concentrates with and without grinding resin. view less | |
| Borchi® Gen 1253 | Borchers, A Company of OMG | Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applica...view more Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applications. Due to the small particle size of the deflocculated pigments excellent color strength and high gloss is achieved. Borchi® Gen 1253 prevents settling and re-flocculation even after prolonged storage of paints and pigment pastes. In addition, this product contains no organic solvents whatsoever and is completely VOC-free. view less | |
| Borchi® Gen 1350 | Borchers, A Company of OMG | Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins...view more Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous pigment concentrates. Borchi® Gen 1350 reveals high dispersing and stabilizing capability for transparent iron oxide pigments as well as organic and inorganic pigments. view less | |
| BUTANOL® NS 104 | BASF Dispersions & Resins | BUTANOL NS 104 is an extensible, high molecular weight, resin-oil compatible styrene butadiene dispersion suitable for flooring adhesives and asphaltic emulsion waterproofing. It promotes webbing/legging. This product also improves elasticity and flexibil...view more BUTANOL NS 104 is an extensible, high molecular weight, resin-oil compatible styrene butadiene dispersion suitable for flooring adhesives and asphaltic emulsion waterproofing. It promotes webbing/legging. This product also improves elasticity and flexibility at low temperatures. It is non-APEO and non-ammonia. view less | |
| BUTANOL® NS 198 | BASF Dispersions & Resins | BUTANOL NS 198 is a cationic, high molecular weight styrene butadiene dispersion designed for use in asphalt modification and waterproofing. It improves strength, ductility and flexibility. This product is non-APEO and non-ammonia. | |
| BUTOFAN® NS 209 | BASF Dispersions & Resins | BUTOFAN NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives ...view more BUTOFAN NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. view less | |
| BUTOFAN® NS 299 | BASF Dispersions & Resins | BUTOFAN NS 299 is an aqueous aqueous non-carboxylated butadiene-styrene copolymer dispersion for use in flooring adhesives and asphalt modification. | |
| BUTONAL® 2230 | BASF Dispersions & Resins | BUTONAL 2230 is a cold polymerized, non-carboxylated fatty acid stabilized styrene-butadiene copolymer used in the manufacture of can sealing compounds. | |
| BUTONAL® 4125 X | BASF Dispersions & Resins | BUTONAL 4125 X is a cold polymerized, non-carboxylated, fatty acid stabilized styrene-butadiene copolymer for use in the manufacture of flooring adhesives and latex foam. | |
| BUTONAL® 4131 X | BASF Dispersions & Resins | BUTONAL 4131 X is a cold polymerized, non-carboxylated, fatty acid stabilized styrene-butadiene copolymer for use in the manufacture of flooring adhesives and latex foam. | |
| BUTONAL® NX 1129 | BASF Dispersions & Resins | BUTONAL NX 1129 is an anionic, crosslinking styrene butadiene dispersion which improves hot asphalt and asphalt emulsion binders to meet SHRP + specifications. APEO- and ammonia-free. | |
| BUTONAL® NX 4190 | BASF Dispersions & Resins | BUTONAL NX 4190 is a cationic, crosslinking styrene butadiene dispersion used in premium chip seals and micro-surfacing asphalt emulsions. It is APEO and ammonia free. | |
| BYD2301 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2301, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in electrostatic flocking of textiles. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. | |
| BYD2302 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2302, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in the production of soft polyester wadding. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 6.0 +/- 1.0. | |
| BYD2303 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2303, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in gold prints for textiles. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. | |
| BYD2600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, an...view more BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD2610 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water....view more BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD2620 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and wat...view more BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD2630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2630, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in elastic interior or exterior wall coatings, and in gigging coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH...view more BYD2630, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in elastic interior or exterior wall coatings, and in gigging coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD2640 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0...view more BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| BYD3053 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3053, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in alkaline-resistant exterior wall coatings and sealer primers for construction applications. This product is waterproof and alkali-resistant....view more BYD3053, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in alkaline-resistant exterior wall coatings and sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less | |
| BYD3064 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cemen...view more BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less | |
| BYD3101 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3101, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in solidified printing pastes for textile applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and...view more BYD3101, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in solidified printing pastes for textile applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less | |
| BYD3102 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3102, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in non-woven fabric adhesives. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| BYD3510 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-r...view more BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less | |
| BYD3520 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3520, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in two-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| BYD3910 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color...view more BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less | |
| BYD3928 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compat...view more BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less | |
| BYD3998 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3998, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolmer that can be used in exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| BYD5105 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5105, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in textiles to make them stiffer and smoother. This product offers excellent yellowing resistance and is APEO free. Its pH value is 4.0 +/- 1.0. | |
| BYD5110 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH val...view more BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH value is 4.0 +/- 1.0. view less | |
| BYD8001 | Tianyi Chemical Engineering Material Co., Ltd. | BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain r...view more BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain resistance. Its pH value is 9.0 +/- 1.0. view less | |
| BYD8600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD8600, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used as a surface coating for textile applications. This product is hydrophobic and retains its gloss well. Its pH value is 7.0 +/- 1.0. | |
| Carboset® AMO 400 | Lubrizol Advanced Materials, Inc. | Carboset® AMO 400 is a non-oxidative, self-crosslinking acrylic modified oil copolymer dispersion with 50% renewable content. Carboset® AMO 400 is APEO free, solvent free and can be formulated to ultra low VOC for wood coatings applications. Carboset® AMO...view more Carboset® AMO 400 is a non-oxidative, self-crosslinking acrylic modified oil copolymer dispersion with 50% renewable content. Carboset® AMO 400 is APEO free, solvent free and can be formulated to ultra low VOC for wood coatings applications. Carboset® AMO 400’s patented oil modification brings unique properties to finishes. Its longer open times are combined with fast drying to produce superior wiping stains. Carboset® AMO 400 also produces excellent sanding sealers with non-gumming sandability even with high intensity machines along with block and print resistance. view less | |
| Carboset® CA1009 | Lubrizol Advanced Materials, Inc. | Carboset® CA1009 is an APEO, NMP, NEP and formaldehyde-free acrylic polyurethane hybrid emulsion developed specifically for roof and building facade coatings. | |
| Carboset® SA 850 | Lubrizol Advanced Materials, Inc. | Carboset® SA 850 is an acrylic copolymer emulsion specifically developed for elastomeric masonry coatings. High performance coatings can be formulated using Carboset SA-850 for a variety of construction materials including concrete, concrete block, brick,...view more Carboset® SA 850 is an acrylic copolymer emulsion specifically developed for elastomeric masonry coatings. High performance coatings can be formulated using Carboset SA-850 for a variety of construction materials including concrete, concrete block, brick, stucco, EIFS and fiber-cement surfaces. view less | |
| CEVA | Yantai Suny Chem International Co., Ltd. | CEVA is soluble in toluene and xylene. It has elasticity like rubber, good solubility and fluidity at room temperature. In addition, it has good weather resistance, chemical resistance, oil resistance, ozone resistance and flame resistance property. | |
| CN104A75 | Sartomer Americas | CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphen...view more CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphenol A based epoxy acrylates. Suggested applications for this include adhesives, coatings, electronics and inks. view less | |
| CN120Z | Sartomer Americas | CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, ana...view more CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor, metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. view less | |
| CN293 | Sartomer Americas | CN293 is a hexafunctional acrylated polyester oligomer that demonstrates good pigment wetting and fast cure response. CN293 is recommended for use in lithographic and flexographic ink formulations, as well as abrasion resistant coatings. | |
| CN307 | Sartomer Americas | CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated int...view more CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated into peroxide cured natural and synthetic rubber systems, where it improves mechanical and performance properties. view less | |
| CN9302 | Sartomer Americas | CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture c...view more CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture cure of shadowed areas for enhanced coating performance. view less | |
| CRAYVALLAC® EF 30P | Arkema Rheology & Specialty Additives | CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALL...view more CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALLAC® EF 30P with REAFREE 6489-TS, Carboxylated Polyester resin. The very good colour stability of formulations containing CRAYVALLAC® EF 30P as matting additive, enables the production of low gloss white and pale colour paints. CRAYVALLAC® EF 30P has been developed specifically to provide matting effect in powder coatings. view less | Request Sample |
| DAOTAN® TW 6474/37WA | Allnex | Daotan® TW 6474/37WA is an aqueous dispersion of an aliphatic polyurethane-acrylic hybrid. It is a hard grade polyurethane dispersion, particularly suitable as a combination partner for alkyd and acrylic emulsions, significantly improving the drying time ...view more Daotan® TW 6474/37WA is an aqueous dispersion of an aliphatic polyurethane-acrylic hybrid. It is a hard grade polyurethane dispersion, particularly suitable as a combination partner for alkyd and acrylic emulsions, significantly improving the drying time and early hardness development. It can also be used for improving the flexibility of acrylic dispersion coatings. view less | Request Sample |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...view more DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. view less | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...view more DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. view less | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...view more DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. view less | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...view more DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). view less | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...view more DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...view more DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| Desmodur® HL BA | Covestro | Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of...view more Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of coatings using Desmodur® HL BA are considerably shorter than those of coatings based on Desmodur® CB polyisocyanates and somewhat longer than those based on Desmodur® IL polyisocyanate. view less | |
| Dispurez 101A | Incorez Ltd. | Dispurez 101A is a hard polyurethane acrylic dispersion designed for excellent pigment compatibility. It’s ideal for use in tough coatings with good durability. Films derived from Incorez Dispurez 101A exhibit excellent water and chemical resistance. The...view more Dispurez 101A is a hard polyurethane acrylic dispersion designed for excellent pigment compatibility. It’s ideal for use in tough coatings with good durability. Films derived from Incorez Dispurez 101A exhibit excellent water and chemical resistance. The product exhibits rapid hardness development and is therefore suitable for a wide range of end applications in the surface coatings industries, particularly industrial wood finishes, hygiene coatings and plastics coatings. view less |
