| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF Corporation, Chemical Intermediates | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| ADDITOL® VXW 6211 | Allnex | ADDITOL® VXW 6211 is a defoamer for emulsion paints, especially for adhesives, which meets the requirements of the Federal Health Administration. | Request Sample |
| ADDITOL® XW 372 N | Allnex | Additol® XW 372 N is a high-efficiency defoamer for waterborne dispersions, interior and exterior emulsion paints. | Request Sample |
| Bubreak® 4400 | Buckman Laboratories, Inc. | Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Adminis...view more Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4400 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. This product is effective in a wide range of resins, including acrylics, vinyl acrylics, poly vinyl acetates, and water-reducible alkyds. view less | |
| Bubreak® 4479 | Buckman Laboratories, Inc. | Bubreak® 4479 is a defoamer concentrate. The product provides efficient foam control in a variety of situations, including acidic or alkaline systems, and over a broad range of conditions. Buckman recommends testing various levels to ensure adequate foam ...view more Bubreak® 4479 is a defoamer concentrate. The product provides efficient foam control in a variety of situations, including acidic or alkaline systems, and over a broad range of conditions. Buckman recommends testing various levels to ensure adequate foam protection. However, as with most defoamers, excessive amounts should be avoided. Bubreak® 4479 disperses readily in water and can be used without prior dilution. However, it is acceptable to dilute the product with water before use. For best results, add the concentration of around 10%. view less | |
| Bubreak® 448 | Buckman Laboratories, Inc. | Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric...view more Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric coatings), and 176.200 (Defoaming agents used in coatings) of the U.S. Food and Drug Administration regulations. Bubreak® 448 can be dispensed directly from shipping containers by chemical-metering pumps or suitable measuring containers. To prevent deterioration of the product, keep drum closed when not in use. Contamination with water or other extraneous materials should be avoided. For the best control of foam, Bubreak® 448 should be added as near to the point of foam formation as possible. It should also be added where there is vigorous mixing action. view less | |
| Bubreak® 454C | Buckman Laboratories, Inc. | Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and ...view more Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 454C has been designed to perform as both an antifoam, fighting foam formulation, and as a defoamer, breaking down existing foam. It is effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. view less | |
| FOAMASTER® MO 2190 | BASF Formulation Additives | FOAMASTER® MO 2190 is a 100% active, liquid defoamer. FOAMASTER® MO 2190 was specially designed to optimize effectiveness, persistence and compatibility in latex based adhesives. It has also proven effective in certain latex-based coating and ink applicat...view more FOAMASTER® MO 2190 is a 100% active, liquid defoamer. FOAMASTER® MO 2190 was specially designed to optimize effectiveness, persistence and compatibility in latex based adhesives. It has also proven effective in certain latex-based coating and ink applications. FOAMASTER® MO 2190 has also been designed to have good film compatibility, which translates to clear, defect-free films. view less | |
| FOAMSTAR® ST 2400 | BASF Formulation Additives | FOAMSTAR® ST 2400 is a novel series of defoamers based on new defoamer chemistry developed and patented by BASF. It is the first new defoamer chemistry in over 30 years. | |
| FOAMSTAR® ST 2410 | BASF Formulation Additives | FOAMSTAR® ST 2410 represents a novel series of defoamers based on new defoamer chemistry. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® defoams on a molecular le...view more FOAMSTAR® ST 2410 represents a novel series of defoamers based on new defoamer chemistry. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® defoams on a molecular level. It also has wetting properties not found in other conventional defoamers. view less | |
| FOAMSTAR® ST 2412 | BASF Formulation Additives | FOAMSTAR® ST 2412 represents a novel series of defoamers based on new defoamer chemistry. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® defoams on a molecular le...view more FOAMSTAR® ST 2412 represents a novel series of defoamers based on new defoamer chemistry. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® defoams on a molecular level. It also has wetting properties not found in other conventional defoamers. view less | |
| FOAMSTAR® ST 2420 | BASF Formulation Additives | FOAMSTAR® ST 2420 represents the latest innovation in hyper branched polymer defoamer technology delivered in an essentially emission-free hydrocarbon matrix. It is amongst the most efficient defoamers requiring up to 50% less dosage to achieve the perfor...view more FOAMSTAR® ST 2420 represents the latest innovation in hyper branched polymer defoamer technology delivered in an essentially emission-free hydrocarbon matrix. It is amongst the most efficient defoamers requiring up to 50% less dosage to achieve the performance of benchmark mineral oil defoamers. view less | |
| FOAMSTAR® ST 2434 | BASF Formulation Additives | FOAMSTAR® ST 2434 is effective in high gloss paints and coatings based on acrylic, styrene acrylic and vinyl acrylic latex. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), ...view more FOAMSTAR® ST 2434 is effective in high gloss paints and coatings based on acrylic, styrene acrylic and vinyl acrylic latex. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® ST 2434 defoams on a molecular level. It also has wetting properties not found in other conventional defoamers. FOAMSTAR® ST 2434 utilizes the FOAMSTAR® Molecule compounded with polysiloxanes in a mineral oil-free system. view less | |
| FOAMSTAR® ST 2436 | BASF Formulation Additives | FOAMSTAR® ST 2436 is part of the series that represents a novel series of defoamers based on new defoamer chemistry. It is the first new defoamer chemistry in over 30 years. It is effective in high gloss paints and coatings based on acrylic, styrene acryl...view more FOAMSTAR® ST 2436 is part of the series that represents a novel series of defoamers based on new defoamer chemistry. It is the first new defoamer chemistry in over 30 years. It is effective in high gloss paints and coatings based on acrylic, styrene acrylic and vinyl acrylic latex. It has greater potency than FOAMSTAR® ST 2434. FOAMSTAR® ST 2436 is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® ST 2436 defoams on a molecular level. It also has wetting properties not found in other conventional defoamers. view less | |
| FOAMSTAR® ST 2438 | BASF Formulation Additives | FOAMSTAR® ST 2438 is a 100% active defoamer compound combining a hyper-branched Star polymer with high-end organo-silicones to deliver fast foam knock down with very high efficiency. FOAMSTAR® ST series represents a novel series of defoamers based on new ...view more FOAMSTAR® ST 2438 is a 100% active defoamer compound combining a hyper-branched Star polymer with high-end organo-silicones to deliver fast foam knock down with very high efficiency. FOAMSTAR® ST series represents a novel series of defoamers based on new defoamer chemistry. This product is effective in high gloss paints and coatings based on acrylic, styrene acrylic and vinyl acrylic latex. view less | |
| TEGO® Wet 500 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 500 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid non-ionic organic surfactant ideal for spray application. It is universally applicable, silicone-free, and has low foam. It is suitable for clear...view more TEGO® Wet 500 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid non-ionic organic surfactant ideal for spray application. It is universally applicable, silicone-free, and has low foam. It is suitable for clear coat, pigmented, radiation-curing, and waterborne systems. TEGO® Wet 500's addition to the coating can be as supplied or as a predilution. It is suitable for for addition during the let-down stage, but is recommended during the grind stage for pigmented formulations. view less | Request Sample |
| TROYKYD® D120 | Arxada – Troy Corporation | TROYKYD® D120 is a powder defoamer for use in both cement and gypsum-based systems and various other dry mix applications. | Request Sample |
