| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less | |
| Abiester 90 | Spolchemie | Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks. | |
| Abifen 125 D | Spolchemie | Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...view more Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. view less | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...view more Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. view less | |
| ABITOL E | Univar Solutions | ABITOL E is a high molecular, hydrogenated, primary monohydric alcohol derived fron rosin acids. Its tackiness, extremely pale color and solubility in common organic solvents and compatibility with resins, film-formers, and oils, have led to its use as a ...view more ABITOL E is a high molecular, hydrogenated, primary monohydric alcohol derived fron rosin acids. Its tackiness, extremely pale color and solubility in common organic solvents and compatibility with resins, film-formers, and oils, have led to its use as a resinous plasticizer and/or tackifier in plastics, lacquers, inks and adhesives. view less | Request Sample |
| Alpha-Rez™ 9200 E | Lawter | Alpha-Rez™ 9200 E is a hybrid resin comprised of a rosin base and a structured visco-elastic hydrocarbon that displays high solubility and viscosity. The product is fast setting with a high gloss and shows high rheological stability under high shear condi...view more Alpha-Rez™ 9200 E is a hybrid resin comprised of a rosin base and a structured visco-elastic hydrocarbon that displays high solubility and viscosity. The product is fast setting with a high gloss and shows high rheological stability under high shear conditions. It also has a high critical toning index which is crucial for waterless offset inks. Alpha-Rez™ 9200 E is suitable for use in web offset, coldset and heatset applications as well as in letterpress and sheet-fed systems. view less | |
| Burez® K80 500D | Lawter | Burez® K80 500D is a rosin soap with 80% solids and functions as an emulsifier in emulsion systems, as a tackifier for bottle label adhesives and applications in pigment resination. The Burez® range of rosin soaps are based on modified and disproportionat...view more Burez® K80 500D is a rosin soap with 80% solids and functions as an emulsifier in emulsion systems, as a tackifier for bottle label adhesives and applications in pigment resination. The Burez® range of rosin soaps are based on modified and disproportionated rosins saponified with potassium hydroxide or sodium. It is designed mostly for emulsion polymerization, wet glue formulations and organic pigment production. view less | |
| Disvimol-101 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss i...view more Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss inks. view less | |
| Disvimol-101(M) | D.S.V. Chemicals Pvt. Ltd. | Disvimol-101(M) is a rosin derivative that has been modified with maleic acid. This product has high gloss and is oil soluble. It can be used in synthetic enamels. | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| Disvimol-104 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-104 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, paper coating, ballpoint pen inks, and liquid inks. | |
| Disvimol-106 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-106 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, ballpoint pen inks, and liquid inks. | |
| Disvipol-201 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-201 is a rosin derivative that has been modified with a phenolic compound. This product is scratchproof and has better solvent release. It can be used in letterpress inks, offset inks, and liquid inks. | |
| Disvipol-203 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes. | |
| Disvipol-205 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-205 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss. It can be used in letterpress inks, offset inks, and gravure printing inks. | |
| Disvipol-207 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-207 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss in the final result. It can be used in web offset and quickset inks. | |
| Disvipol-209 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-209 is a rosin derivative that has been modified with a phenolic compound. This product has good solubility in aliphatic hydrocarbon solvents. It can be used in high quality quickset or sheet-fed inks. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Disvipol-252 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives. | |
| Disvipol-271 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-271 is a phenolic resin. This product has high purity and is very chemical- and weather-resistant. It can be used in spar varnishes, marine enamels, Tung oil-adducts for offset printing, and wire enamels. | |
| DRESINATE 91 | Univar Solutions | DRESINATE 91 is rosin soap is a fluid, high solids, aqueous solution of potassium soap of tall oil rosin. It is designed primarily for applications that require soap solutions of as low a water content as practical and of viscosity low enough that it is p...view more DRESINATE 91 is rosin soap is a fluid, high solids, aqueous solution of potassium soap of tall oil rosin. It is designed primarily for applications that require soap solutions of as low a water content as practical and of viscosity low enough that it is possible to pump the soap at practical temperatures. view less | Request Sample |
| DRESINATE TX | Univar Solutions | DRESINATE TX is a tall oil soap is a free flowing solid, fully saponified sodium soap of tall oil. . | Request Sample |
| Droester™ 2751 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2751 is a Penta Erythritol Esterified Rosin. | |
| Droester™ 2752 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2752 is a Glycerine Esterified Rosin. | |
| Dromal™ 2351 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2351 is Rosin modified Maleic Resin. | |
| Dromal™ 2354 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2354 is Rosin modified Maleic Resin. | |
| Dropol™ 2201 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2201 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2203 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2203 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2205 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2205 is a Rosin Modified Phenolic Resin. | |
| DYMEREX | Univar Solutions | DYMEREX is a modified rosin is a pale, acidic, thermoplastic, high softening point resin. . | Request Sample |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Estergum-752 | D.S.V. Chemicals Pvt. Ltd. | Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhes...view more Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhesives. view less | |
| Filtrez™ 3305 A | Lawter | Filtrez™ 3305 A is a maleic modified rosin ester made for the thermoplastic pavement marking industry. The resin needs less liquid plasticizer in the finished application and is ideally suited for use in coatings and pavement markings. | |
| Filtrez™ 3310 A | Lawter | Filtrez™ 3310 A is a maleic modified rosin ester for use in nitrocellulose-based ink systems that need lower aromaticity to be compatible with alcohols in the system. It has good adhesion and is considered ideal for use in coatings and pavement markings. | |
| Filtrez™ 3320 A | Lawter | Filtrez™ 3320 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Filtrez™ 3320 A is considered suitable for use in gravure and flexographic inks and coatings. | |
| Filtrez™ 339 A | Lawter | Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure i...view more Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure inks and coatings. view less | |
| Filtrez™ 5014 A | Lawter | Filtrez™ 5014 A is a fumaric modified rosin ester, soluble in alcohol and with the ability to display fast drying, low foaming and bronzing capabilities as well as good wet and dry rub resistance features. The product was created with the intention of pro...view more Filtrez™ 5014 A is a fumaric modified rosin ester, soluble in alcohol and with the ability to display fast drying, low foaming and bronzing capabilities as well as good wet and dry rub resistance features. The product was created with the intention of providing pigment wetting ability in water-based inks and coatings. Filtrez™ 5014 A was developed for use in gravure and flexographic ink applications and coatings. view less | |
| Filtrez™ 521 A | Lawter | Filtrez™ 521 A is a fumaric modified rosin ester, soluble in alcohol with a high acid value and softening point. The product's broad compatibility and solubility allow it to be an important consideration in flexographic printing inks. | |
| Filtrez™ 526 A | Lawter | Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. F...view more Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. Filtrez™ 526 A is suitable for use in gravure and flexographic inks and coatings. view less | |
| Filtrez™ 530 A | Lawter | Filtrez™ 530 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and softening point. Its low viscosity in aqueous ammonia solutions and alcohol, makes for high gloss in overprint varnishes. Filtrez™ 530 A is usually found i...view more Filtrez™ 530 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and softening point. Its low viscosity in aqueous ammonia solutions and alcohol, makes for high gloss in overprint varnishes. Filtrez™ 530 A is usually found in water-based gravure and flexographic inks and solvents. view less | |
| Filtrez™ 531 A | Lawter | Filtrez™ 531 A is a fumaric modified rosin ester, soluble in alcohol and with a moderately high acid value, but high softening point. The resin provides leveling and gloss and is an especially useful agent in floor polishes. It can be applied in water-bas...view more Filtrez™ 531 A is a fumaric modified rosin ester, soluble in alcohol and with a moderately high acid value, but high softening point. The resin provides leveling and gloss and is an especially useful agent in floor polishes. It can be applied in water-based flexographic and gravure inks and solvents. view less | |
| Filtrez™ 567 A | Lawter | Filtrez™ 567 A is a fumaric modified rosin ester that is soluble in alcohol with similar characteristics as acrylic resins as far as transfer, drying, gloss and water resistance of the dry film. Its chemical difference leads it to display an enhanced perf...view more Filtrez™ 567 A is a fumaric modified rosin ester that is soluble in alcohol with similar characteristics as acrylic resins as far as transfer, drying, gloss and water resistance of the dry film. Its chemical difference leads it to display an enhanced performance when compared to other water-soluble resins. Filtrez™ 567 A is ideally suited for use in gravure and flexographic inks and coatings. view less | |
| Filtrez™ 591 A | Lawter | Filtrez™ 591 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and good solubility in glycol systems. Along with a low molecular weight and the nature of the rosin, the benefits combine to ensure an enhanced pigment recept...view more Filtrez™ 591 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and good solubility in glycol systems. Along with a low molecular weight and the nature of the rosin, the benefits combine to ensure an enhanced pigment reception to wetting. The product is particularly suited for use in moisture set inks and pigment striking applications. view less | |
| Filtrez™ 618 A | Lawter | Filtrez™ 618 A is a phenolic modified rosin ester displaying high solubility in aliphatic and vegetable oils. It was created to provide good pigment wetting properties with low viscosity being an added feature. The product finds uses in offset inks and co...view more Filtrez™ 618 A is a phenolic modified rosin ester displaying high solubility in aliphatic and vegetable oils. It was created to provide good pigment wetting properties with low viscosity being an added feature. The product finds uses in offset inks and coatings. view less | |
| Filtrez™ 620 A | Lawter | Filtrez™ 620 A is a phenolic-modified rosin ester displaying high solubility in aliphatic and vegetable oils. The product was created to provide good pigment wetting ability and complements this feature by offering low viscosity. It is primarily used in g...view more Filtrez™ 620 A is a phenolic-modified rosin ester displaying high solubility in aliphatic and vegetable oils. The product was created to provide good pigment wetting ability and complements this feature by offering low viscosity. It is primarily used in grinding and flushing vehicles in offset inks and coatings. view less | |
| Filtrez™ 629 A | Lawter | Filtrez™ 629 A is a phenolic modified rosin ester that has medium viscosity with low solubility in aliphatic solvents. The product was created as a workhorse resin showing good gel reactivity with aluminum solvents. Filtrez™ 629 A is ideally suited for us...view more Filtrez™ 629 A is a phenolic modified rosin ester that has medium viscosity with low solubility in aliphatic solvents. The product was created as a workhorse resin showing good gel reactivity with aluminum solvents. Filtrez™ 629 A is ideally suited for use in heatset and sheet-fed inks. view less | |
| Filtrez™ 656 A | Lawter | Filtrez™ 656 A is a phenolic modified rosin ester with a high viscosity and good solubility in aliphatic solvents. It was created as an elastic resin, showing gel structure without the need for additional chelates. The resin is regarded as a good foundati...view more Filtrez™ 656 A is a phenolic modified rosin ester with a high viscosity and good solubility in aliphatic solvents. It was created as an elastic resin, showing gel structure without the need for additional chelates. The resin is regarded as a good foundation for creating heatset and sheet-fed systems. view less | |
| Filtrez™ 672 A | Lawter | Filtrez™ 672 A is a phenolic modified rosin ester with a high viscosity, good solubility in aliphatic solvents and created as an elastic resin gel structure. The product offers a good base for the creation of heatset and sheet-fed systems in high temperat...view more Filtrez™ 672 A is a phenolic modified rosin ester with a high viscosity, good solubility in aliphatic solvents and created as an elastic resin gel structure. The product offers a good base for the creation of heatset and sheet-fed systems in high temperature and shear applications. It is considered ideal for use in offset inks and coatings. view less | |
| Filtrez™ 681 A | Lawter | Filtrez™ 681 A is a phenolic modified rosin ester with a high molecular weight and displaying good solubility in aliphatic solvents. The product was created as an elastic co-resin to help add compatibility while not losing structure. Filtrez™ 681 A offers...view more Filtrez™ 681 A is a phenolic modified rosin ester with a high molecular weight and displaying good solubility in aliphatic solvents. The product was created as an elastic co-resin to help add compatibility while not losing structure. Filtrez™ 681 A offers good pigment wetting and is ideally suited for use in offset inks and coatings. view less | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. view less | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...view more Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. view less | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...view more Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. view less | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...view more Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. view less | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...view more Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. view less | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...view more Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. view less | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...view more Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. view less | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...view more Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. view less | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...view more Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. view less | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...view more Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. view less | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...view more Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...view more Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...view more Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 197-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made especially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac 197-105 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac 197-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac 197-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceed...view more Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product also has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. view less | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...view more Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. view less | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...view more Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. view less | |
| FORAL 105-E | Univar Solutions | FORAL 105-E is a pale, thermoplastic ester resin derived from pentaerythritol and a highly stabilized rosin, offering advantages as the tackifier or modifier resin in various adhesives and coating compositions. | Request Sample |
| FORAL 85-E | Univar Solutions | FORAL 85-E is a very pale, thermoplastic ester resin derived from glycerol and a highly stabilized rosin that has outstanding resistance to oxidation and discoloration caused by heat and aging, which finds benefit in protective and barrier-type coatings. | Request Sample |
| FORAL AX-E | Univar Solutions | FORAL AX-E is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is the palest of the Eastman Forals and most highly stabilized rosin. . | Request Sample |
| FORALYN 110 | Univar Solutions | FORALYN 110 is a pentaerythritol ester of hydrogenated rosin, which combines the feature of light initial color and good color retention with the advantages of excellent long-term retention of adhesive properties and UV light stability. | Request Sample |
| FORALYN 5020 F | Univar Solutions | FORALYN 5020 F is a methyl ester of hydrogenated rosin, is a light amber liquid resin having marked resistance to aging with minimal odor and are used as a resinous plasticizer or tackifier in finished products such as adhesives, inks, and lacquers. | Request Sample |
| Glycerol Ester of Gum Rosin | Qingdao Sun Chemical Corporation Limited | Glycerol Ester of Gum Roson is an organic compound made by high-quality pinus massoniana rosin and glycerol. It’s a natural tackily resin which has excellent performance and, after the intensive processing (esterification, decolorization,stabilization tre...view more Glycerol Ester of Gum Roson is an organic compound made by high-quality pinus massoniana rosin and glycerol. It’s a natural tackily resin which has excellent performance and, after the intensive processing (esterification, decolorization,stabilization treatment,etc.), has merits such as light color and low odor. It is ideal for paint, hot melt, as well as pressure sensitive adhesives and coatings. This product has a softening point of 85 ± 2°C, an acid value of 7mg KOH/g, and an ash content of < 0.01%. view less | |
| GLYCEROL ESTER OF GUM ROSIN 85 (PM-003) | PT. NASCO | GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture variou...view more GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color. view less | |
| GUM ROSIN INDONESIAN (PM-002) | PT. NASCO | GUM ROSIN INDONESIAN is made up of various resin acids such as Abietic, Palustric, Isopimaric, Mercusic Acids. | |
| Gum Rosin WG | SWISLOYD LIMITED | Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents...view more Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. view less | |
| Gum Rosin WW | SWISLOYD LIMITED | Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic so...view more Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. view less | |
| Gum Rosin, WW-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, WW-Grade, in the form of a pale yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. | |
| Gum Rosin X | SWISLOYD LIMITED | Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many ...view more Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. view less | |
| Gum Rosin, X-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents...view more Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. view less | |
| HE100 | Tianyi Chemical Engineering Material Co., Ltd. | HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...view more HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. view less | |
| HE105 | Tianyi Chemical Engineering Material Co., Ltd. | HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...view more HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. view less | |
| HE85 | Tianyi Chemical Engineering Material Co., Ltd. | HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...view more HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. view less | |
| HE90 | Tianyi Chemical Engineering Material Co., Ltd. | HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...view more HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. view less | |
| HE95 | Tianyi Chemical Engineering Material Co., Ltd. | HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SB...view more HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. view less | |
| HR100 | Tianyi Chemical Engineering Material Co., Ltd. | HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR100A | Tianyi Chemical Engineering Material Co., Ltd. | HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...view more HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR100B | Tianyi Chemical Engineering Material Co., Ltd. | HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...view more HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR105 | Tianyi Chemical Engineering Material Co., Ltd. | HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR110 | Tianyi Chemical Engineering Material Co., Ltd. | HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging view less | |
| HR95 | Tianyi Chemical Engineering Material Co., Ltd. | HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing ...view more HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HT100 | Tianyi Chemical Engineering Material Co., Ltd. | HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...view more HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT105 | Tianyi Chemical Engineering Material Co., Ltd. | HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...view more HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT115 | Tianyi Chemical Engineering Material Co., Ltd. | HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...view more HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT85 | Tianyi Chemical Engineering Material Co., Ltd. | HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...view more HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT90 | Tianyi Chemical Engineering Material Co., Ltd. | HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...view more HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT95 | Tianyi Chemical Engineering Material Co., Ltd. | HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This p...view more HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| Hydro-Rez™ 3886 A | Lawter | Hydro-Rez™ 3886 A is a fumaric modified rosin ester which shows good compatibility with ethyl cellulose and nitrocellulose and has good solubility in alcohol. It is mostly used in flexographic inks to enhance adhesion and gloss and to increase solids. Hyd...view more Hydro-Rez™ 3886 A is a fumaric modified rosin ester which shows good compatibility with ethyl cellulose and nitrocellulose and has good solubility in alcohol. It is mostly used in flexographic inks to enhance adhesion and gloss and to increase solids. Hydro-Rez™ 3886 A can also be used is SS nitrocellulose-based lacquer systems if the solvents are to be based on alcohols. Further usage of the product is in carton and specialty inks, spirit varnishes and shellac substitutes. view less |
