| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking chara...view more AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica' and holds a COSMOS certification. view less | Request Sample |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...view more AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. view less | Request Sample |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...view more AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. view less | Request Sample |
| AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
| AEROSOL® OT-70 PG Surfactant | Univar Solutions | AEROSOL® OT-70 PG Surfactant is a surfactant with high flash point. It is an excellent wetting, re-wetting, and levelling agent. | Request Sample |
| AEROSOL® OT-75 Surfactant | Univar Solutions | AEROSOL® OT-75 Surfactant is a surfactant with excellent wetting, re-wetting, and levelling agent. | Request Sample |
| ASASWA | PCI Group, Inc. | ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows ...view more ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows for enhanced pigment wetting and color development and eliminates hard settling. view less | |
| CAB-O-SIL® TS-382 | Univar Solutions | CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performa...view more CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance than untreated silica. view less | Request Sample |
| CAB-O-SIL® TS5022 | Univar Solutions | CAB-O-SIL® TS5022 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| CAB-O-SIL® TS530 | Univar Solutions | CAB-O-SIL® TS530 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls in the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| Celofiber® CF200W | Celotech Chemical Co., Ltd. | Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influ...view more Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF200W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 200um. view less | |
| Celofiber® CF300W | Celotech Chemical Co., Ltd. | Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influ...view more Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF300W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 300um. view less | |
| Celofiber® CF450G | Celotech Chemical Co., Ltd. | Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It impr...view more Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450G extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. view less | |
| Celofiber® CF450W | Celotech Chemical Co., Ltd. | Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influ...view more Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. view less | |
| Celofiber® CF500W | Celotech Chemical Co., Ltd. | Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influ...view more Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF500W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 500um. view less | |
| Celofiber® CF60W | Celotech Chemical Co., Ltd. | Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influen...view more Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF60W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 60um. view less | |
| Celofiber® CF800W | Celotech Chemical Co., Ltd. | Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influ...view more Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF800W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 800um. view less | |
| Celopro® CS160 | Celotech Chemical Co., Ltd. | Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...view more Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. view less | |
| Celopro® CS170 | Celotech Chemical Co., Ltd. | Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...view more Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. view less | |
| Celopro® CS180 | Celotech Chemical Co., Ltd. | Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...view more Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. view less | |
| Celopro® HHB15S | Celotech Chemical Co., Ltd. | Celopro® HHB15S is a medium viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, personal care products, and h...view more Celopro® HHB15S is a medium viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, personal care products, and household cleaning products. view less | |
| Celopro® HHB30S | Celotech Chemical Co., Ltd. | Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleanin...view more Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. view less | |
| Celopro® HHB50S | Celotech Chemical Co., Ltd. | Celopro® HHB50S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, interior and exterior c...view more Celopro® HHB50S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. view less | |
| Celopro® HHB60S | Celotech Chemical Co., Ltd. | Celopro® HHB60S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, personal care products,...view more Celopro® HHB60S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, personal care products, and household cleaning products. view less | |
| Celopro® HHB70S | Celotech Chemical Co., Ltd. | Celopro® HHB70S is an extremely high viscosity Hydroxyethyl cellulose (HEC). It is water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating and so on. | |
| Celopro® MH15M P | Celotech Chemical Co., Ltd. | Celopro® MH15M P is a medium viscosity type of Hydroxyethyl methylcellulose (HEMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offere...view more Celopro® MH15M P is a medium viscosity type of Hydroxyethyl methylcellulose (HEMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered under the Celopro® MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints. view less | |
| Celopro® MH40MP | Celotech Chemical Co., Ltd. | Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered...view more Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints. view less | |
| Celopro® MH55M FP | Celotech Chemical Co., Ltd. | Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retent...view more Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. This product has been applied in tile adhesives, skim coats, thin layer plasters, gypsum based trowelling compounds, machine applied plasters, and decorative renders. view less | |
| Celopro® MH70M FP | Celotech Chemical Co., Ltd. | Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ap...view more Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in gypsum and cement based plasters, joint fillers, machine-applied plasters, tile adhesives, gypsum-lime-plasters, thin layer plasters, and gypsum based plasters. view less | |
| Celopro® MK20M FP | Celotech Chemical Co., Ltd. | Celopro® MK20M FP is a non modified medium high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® ...view more Celopro® MK20M FP is a non modified medium high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. view less | |
| Celopro® MK30M FP | Celotech Chemical Co., Ltd. | Celopro® MK30M FP is a non-modified high viscosity Hydroxypropyl methylcellulose (HPMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modi...view more Celopro® MK30M FP is a non-modified high viscosity Hydroxypropyl methylcellulose (HPMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. It can be applied as thickener in tile adhesives, plasters, skim coats, trowelling compounds etc. view less | |
| Celopro® MK40M FP | Celotech Chemical Co., Ltd. | Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-mod...view more Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. It can be applied as thickener in tile adhesives, cement-lime-plasters, skim coats, plasters, machine applied plasters, joint fillers and thermal insulation systems. view less | |
| Celopro® MK60M FP | Celotech Chemical Co., Ltd. | Celopro® MK60M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. | |
| Celopro® MK70M FP | Celotech Chemical Co., Ltd. | Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ...view more Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in plaster, joint filler, tile adhesive, gypsum-lime-plasters, thin layer plasters etc. view less | |
| Celopro® MK70MS FP | Celotech Chemical Co., Ltd. | Celopro® MK70MS FP is an extremely high viscosity type of Hydroxypropyl methyl cellulose (HPMC) with surface-treatment. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide wate...view more Celopro® MK70MS FP is an extremely high viscosity type of Hydroxypropyl methyl cellulose (HPMC) with surface-treatment. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. This product can be applied in plasters, joint fillers, tile adhesives, gypsum-lime-plasters, and thin layer plasters. view less | |
| CRAYVALLAC® ANTISETTLE CVP | Arkema Rheology & Specialty Additives | CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent contro...view more CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent control of sedimentation combined with ease of application. In addition to coatings applications, CRAYVALLAC® ANTISETTLE CVP has also been used successfully in a multitude of other applications such as inks, adhesives, mastics, caulks, sealants, fillers, greases and lubricants. view less | Request Sample |
| CRAYVALLAC® EXTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLA...view more CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximized when activation was performed at high temperatures. view less | Request Sample |
| CRAYVALLAC® LA-150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-150 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to medium to high polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
| CRAYVALLAC® LA-250 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-250 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to low polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
| CRAYVALLAC® LA-377 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitab...view more CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided. view less | Request Sample |
| CRAYVALLAC® LV | Arkema Rheology & Specialty Additives | CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It impart...view more CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® MT | Arkema Rheology & Specialty Additives | CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromati...view more CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. It shows excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® Optima | Arkema Rheology & Specialty Additives | CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application f...view more CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application for its smoother viscosity resulting in good compromise between levelling and sag resistance. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® PA3 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to sol...view more CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. view less | Request Sample |
| CRAYVALLAC® PA3 WDA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscos...view more CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling. view less | Request Sample |
| CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...view more CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
| CRAYVALLAC® PA3 XAF 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres...view more CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® PA4 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for p...view more CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. CRAYVALLAC® PA4 BA 20 is especially suited to coatings demanding a higher degree of surface gloss or transparency. view less | Request Sample |
| CRAYVALLAC® PA4 WDA 12 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA ...view more CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA 12 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
| CRAYVALLAC® PA4 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 p...view more CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
| CRAYVALLAC® PA5 XSR 25 | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...view more CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| CRAYVALLAC® SF | Arkema Rheology & Specialty Additives | CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydro...view more CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fibre-like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic providesa very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL pa...view more CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the ra...view more CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...view more CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...view more CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| CRAYVALLAC® SUPER | Arkema Rheology & Specialty Additives | CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net...view more CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® ULTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result...view more CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| Ez Gel 15A100 | Eagle Specialty Products | Ez Gel MS is a multifunctional treated mineral that provides excellent anti-settling properties and superior sag control with minimal impact on viscosity. | |
| Ez Gel 15nBA | Eagle Specialty Products | Ez Gel 15nBA is an n-Butyl Acetate-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel 15nBA is most commonly used in solvent-borne coating syst...view more Ez Gel 15nBA is an n-Butyl Acetate-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel 15nBA is most commonly used in solvent-borne coating system applications. view less | |
| Ez Gel 15X | Eagle Specialty Products | Ez Gel 15X is a Xylene-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel 15X is most commonly used in solvent-borne coating system application...view more Ez Gel 15X is a Xylene-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel 15X is most commonly used in solvent-borne coating system applications. view less | |
| Ez Gel MS | Eagle Specialty Products | Ez Gel MS is a mineral spirit-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel MS is most commonly used in solvent-borne coating system appli...view more Ez Gel MS is a mineral spirit-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel MS is most commonly used in solvent-borne coating system applications. view less | |
| Ez Gel Novoc TBA | Eagle Specialty Products | Ez Gel Novoc TBA is a Tertiary Butyle Acetate-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel Novoc TBA is most commonly used in solvent-bor...view more Ez Gel Novoc TBA is a Tertiary Butyle Acetate-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel Novoc TBA is most commonly used in solvent-borne coating system applications. view less | |
| Ez Gel W 16 | Eagle Specialty Products | Ez Gel W 16 is a water/PG-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel W 16 is most commonly used in solvent-borne coating system applica...view more Ez Gel W 16 is a water/PG-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel W 16 is most commonly used in solvent-borne coating system applications. view less | |
| FLOWLEN SH-290 | GSI Exim America, Inc. | FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the ...view more FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the baking condition. This product also shows excellent anti-settling property without strong flocculation defect. It appears in the form of a pale yellow paste. view less | |
| FMC-500 | FTC Korea Co.,Ltd | FMC-500 has excellent sagging control and good storage stability and gloss retention. It is suitable for use in clear coats and xylene solvents. | Request Sample |
| FMC-600 | FTC Korea Co.,Ltd | FMC-600 has excellent sagging control and good storage stability and gloss retention. It is suitable for use in clear coats and xylene solvents. | Request Sample |
| FSC-20 | FTC Korea Co.,Ltd | FSC-20 is easy to disperse into coating formulations. It has excellent high viscosity and is a long retained anti-sagging and anti-settling agent. It is suitable for use in marine, architecture, and heavy duty coatings. | Request Sample |
| HB-612 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use i...view more HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. view less | |
| Jetfil® P200 | Imerys Performance Additives | Jetfil® P200 is a high purity, platy talc used in polyolefins to increase stiffness and raise heat deflection temperature (HDT). | |
| Jetfil® P350 | Imerys Performance Additives | Jetfil® P350 is a high purity, platy talc used as a general purpose talc that has low binder demand with good gloss control and anti-sag properties in paint formulations. | |
| Jetfil® P500 | Imerys Performance Additives | Jetfil® P500 is a high purity, platy talc used in polyolefins to increase stiffness and raise heat deflection temperature (HDT). | |
| Mistron® 353 | Imerys Performance Additives | Mistron® 353 is a platy, high purity talc that is used in interior and exterior coating, adhesive and sealant formulations. | |
| Mistron® 554 | Imerys Performance Additives | Mistron® 554 is a platy, high purity talc that improves barrier properties, corrosion resistance and stain blocking ability in architectural and industrial primers. | |
| Mistron® Monomix | Imerys Performance Additives | Mistron® Monomix is a platy, high purity talc that improves barrier properties, corrosion resistance and stain blocking ability in architectural and industrial primers. | |
| Mistron® Ultramix | Imerys Performance Additives | Mistron® Ultramix is a platy, high purity talc used in interior and exterior coating, adhesive and sealant formulations. | |
| MONORAL® 3300 | HS CHEM CO.,LTD | MONORAL® 3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often use...view more MONORAL® 3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. view less | |
| MONORAL® 3300H | HS CHEM CO.,LTD | MONORAL® 3300H is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable with most solvent based synthetic resin coatings. It is used i...view more MONORAL® 3300H is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable with most solvent based synthetic resin coatings. It is used in heavy duty coatings, industrial coatings, and architectural coatings. view less | |
| MONORAL® 3300K | HS CHEM CO.,LTD | MONORAL® 3300K is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often us...view more MONORAL® 3300K is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. view less | |
| MONORAL® 3300M | HS CHEM CO.,LTD | MONORAL® 3300M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often us...view more MONORAL® 3300M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. view less | |
| MONORAL® 3300S | HS CHEM CO.,LTD | MONORAL® 3300S is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often us...view more MONORAL® 3300S is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. view less | |
| MONORAL® 5500 | HS CHEM CO.,LTD | MONORAL® 5500 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product is...view more MONORAL® 5500 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product is used in heavy duty coatings, industrial coatings, and architectural coatings. view less | |
| MONORAL® 8500 | HS CHEM CO.,LTD | MONORAL® 8500 is an organically modified derivative of castor oil that comes in the form of a white powder. This product is used in adhesives, inks, decorative coatings, varnishes, epoxies, aliphatic and aromatic solvent borne coatings, powder coatings, t...view more MONORAL® 8500 is an organically modified derivative of castor oil that comes in the form of a white powder. This product is used in adhesives, inks, decorative coatings, varnishes, epoxies, aliphatic and aromatic solvent borne coatings, powder coatings, traffic paint, and solvent free coatings. view less | |
| MONORAL® 8700 | HS CHEM CO.,LTD | MONORAL® 8700 is a micronized amide wax powder. This product is often used in heavy duty protective coatings, top coats, primers, and solvent based anti-corrosion coatings. | |
| MONORAL® 8800 | HS CHEM CO.,LTD | MONORAL® 8800 is a micronized amide wax powder. This product is used in heavy duty protective coatings, top coats, primers, and solvent based anti-corrosion coatings. | |
| MONORAL® 8900 | HS CHEM CO.,LTD | MONORAL® 8900 is a micronized amide wax powder. This product is used in heavy duty protective coatings and solvent based anti-corrosion coatings. | |
| MONORAL® A630-20M | HS CHEM CO.,LTD | MONORAL® A630-20M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product can impart excellent anti-sagging and anti-settling properties and is applicable to most solvent based synthetic resin coatings in the aliphatic...view more MONORAL® A630-20M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product can impart excellent anti-sagging and anti-settling properties and is applicable to most solvent based synthetic resin coatings in the aliphatic system. It is also used in heavy duty, general industrial, decorative, and wood finishes. view less | |
| MONORAL® A670-20M | HS CHEM CO.,LTD | MONORAL® A670-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coati...view more MONORAL® A670-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coatings. It is also used in oil modified urethane coatings, heavy duty, general industrial, decorative, and wood finishes. view less | |
| MONORAL® A680-20M | HS CHEM CO.,LTD | MONORAL® A680-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coati...view more MONORAL® A680-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coatings. It is also used in heavy duty, general industrial, decorative, and wood finishes. view less | |
| MONORAL® A690-20M | HS CHEM CO.,LTD | MONORAL® A690-20M is a synthetic polyamide wax that is applicable to most solvent based synthetic resin coatings in the aliphatic system. This product is often used in general industrial, decorative, wood finishes and architectural coatings with low odor ...view more MONORAL® A690-20M is a synthetic polyamide wax that is applicable to most solvent based synthetic resin coatings in the aliphatic system. This product is often used in general industrial, decorative, wood finishes and architectural coatings with low odor requirements. view less | |
| MONORAL® AF3200 | HS CHEM CO.,LTD | MONORAL® AF3200 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is used in architectural and industrial coatings as well as resins in aliphatic sy...view more MONORAL® AF3200 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is used in architectural and industrial coatings as well as resins in aliphatic systems. view less | |
| MONORAL® BA3400 | HS CHEM CO.,LTD | MONORAL® BA3400 is a synthetic polyamide wax dispersed in HAPs free solvent that comes in the form of a white paste. This product develops excellent anti-sagging properties and is used in heavy duty, industrial, and architectural coatings. | |
| MONORAL® ED | HS CHEM CO.,LTD | MONORAL® ED is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in woo...view more MONORAL® ED is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. view less | |
| MONORAL® ED-10X | HS CHEM CO.,LTD | MONORAL® ED-10X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in...view more MONORAL® ED-10X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. view less | |
| MONORAL® ED-15X | HS CHEM CO.,LTD | MONORAL® ED-15X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in...view more MONORAL® ED-15X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. view less | |
| MONORAL® NT3300 | HS CHEM CO.,LTD | MONORAL® NT3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is applicable to low toxic solvent systems. It is used in heavy duty coatings, ind...view more MONORAL® NT3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is applicable to low toxic solvent systems. It is used in heavy duty coatings, industrial coatings, and architectural coatings. view less | |
| MONORAL® SD | HS CHEM CO.,LTD | MONORAL® SD is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in woo...view more MONORAL® SD is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. view less | |
| MONORAL® SD-10X | HS CHEM CO.,LTD | MONORAL® SD-10X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in...view more MONORAL® SD-10X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. view less | |
| MONORAL® SD-15X | HS CHEM CO.,LTD | MONORAL® SD-15X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product ...view more MONORAL® SD-15X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. view less | |
| Nicron® 403 | Imerys Performance Additives | Nicron® 403 is a platy, high purity talc that enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. |
