UL Prospector

Success!

Successfully saved your search
(1) NATCATalyst 140 NiCHEM CORP. NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol.
(2) NATCATalyst 170 NiCHEM CORP. NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less
(3) FASTCATaylst B25 NiCHEM CORP. FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less
(4) NATCATalyst 140B NiCHEM CORP. NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol.
(5) NATCATalyst 229B NiCHEM CORP. NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less
(6) NATCATalyst 229W NiCHEM CORP. NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less
2-Ethylhexanoic Acid Perstorp 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and P...view more 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and PVC stabilizers. Other application areas include wood preservatives, catalyst for polyurethane and in pharmaceuticals. view less
Request Sample ACURE™ 500 Allnex ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...view more ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. view less
Request Sample ADDITOL® E 04594 Allnex ADDITOL® E 04594 is a catalyst masterbatch designed for use in hybrid, TGIC or Araldite® PT-910 systems. ADDITOL® E 04594 contains 10% active substance in a special polyester resin carrier. ADDITOL® E 04594 is easily handled and greatly improves the disp...view more ADDITOL® E 04594 is a catalyst masterbatch designed for use in hybrid, TGIC or Araldite® PT-910 systems. ADDITOL® E 04594 contains 10% active substance in a special polyester resin carrier. ADDITOL® E 04594 is easily handled and greatly improves the dispersion of catalyst in powder coatings. view less
Request Sample ADDITOL® P 920 Allnex ADDITOL® P 920 is a catalyst masterbatch designed for create wrinkle finishes. It contains 5% active substance in a hydroxylated polyester matrix. Coatings made using this masterbatch in conjunction with CRYLCOAT® 2920-0 and a glycoluril crosslinker produ...view more ADDITOL® P 920 is a catalyst masterbatch designed for create wrinkle finishes. It contains 5% active substance in a hydroxylated polyester matrix. Coatings made using this masterbatch in conjunction with CRYLCOAT® 2920-0 and a glycoluril crosslinker produce a consistent wrinkle finish with good mechanical properties. view less
Request Sample ADDITOL® P 963 Allnex ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersio...view more ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations. view less
Request Sample ADDITOL® P 964 Allnex ADDITOL® P 964 is a catalyst master batch designed for use in hybrid, TGIC or ARALDITE PT-910 systems. It contains 5% active substance and is designed for indoor or outdoor use. ADDITOL® P 964 is easily handled and greatly improves the dispersion of catal...view more ADDITOL® P 964 is a catalyst master batch designed for use in hybrid, TGIC or ARALDITE PT-910 systems. It contains 5% active substance and is designed for indoor or outdoor use. ADDITOL® P 964 is easily handled and greatly improves the dispersion of catalyst in powder coatings. view less
Request Sample ADDITOL® P 966 Allnex ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in po...view more ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values. view less
Activox® 500 Huntsman Pigments & Additives Activox® 500 Zinc Oxide is a chemically produced bright white powder of very high purity porous zinc oxide with high surface area and typical particle size of 5 microns. It is a very effective fungi stat in both aqueous and non-aqueous paint systems.
Activox® C50 Huntsman Pigments & Additives Activox® C50 is a bright white powder manufactured from high purity raw materials and by a process which permits close control of physical and chemical properties. Its surface area is 50 meters squared per gram.
Activox® C80 Huntsman Pigments & Additives Activox® C80 is a bright white powder manufactured from high purity raw materials and by a process which permits close control of physical and chemical properties. Its surface area is 80 meters squared per gram.
Request Sample BL-693 Buckman Laboratories, Inc. BL-693 is a delayed action amine catalyst based on ATMEDA, Buckman Laboratories' traditional amine catalyst. BL-693 will provide the same catalytic activity as ATMEDA while allowing the formulator more flexibility in mixing and mold filling times. This...view more BL-693 is a delayed action amine catalyst based on ATMEDA, Buckman Laboratories' traditional amine catalyst. BL-693 will provide the same catalytic activity as ATMEDA while allowing the formulator more flexibility in mixing and mold filling times. This product will consistently reduce friability in foam applications. The product also has the potential to act as a curing catalyst at higher use levels. Buckman recommends testing BL-693 to determine the appropriate use level for each foam system. view less
Request Sample BYK®-CATALYST 450 BYK BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especiall...view more BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especially low reactive melamine formaldehyde resins of HMMM-type need an accelerator to lower the curing temperature or to reduce the baking time. In comparison with pure para-toluenesulfonic acid, the product shows considerably lower viscosity increase on storage which can extend shelf life 1,5 - 3 times. The additive allows a 10 to 20°C lower baking temperature compared to other blocked para-TSA catalysts (such as those with morpholine or aminomethylpropanol). view less
Basic Chromic Acetate Powder McGean-Rohco, Inc. Basic Chromic Acetate Powder is used in pigments, drilling muds, textile mordants, leather tanning, and as catalysts for oxidation, polymerization, and emulsion hardening.
Basic Chromic Sulfate Solution McGean-Rohco, Inc. Basic Chromic Sulfate Solution is a dark green solution. Uses include metal finishing, pigments, textile mordants, leather tanning, and catalysts.
Bisomer® PTE GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular wei...view more Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol. Bisomer® PTE is an aromatic tertiary amine used as an amine activator for organic peroxide initiation, ideal for use in formulations using dibenzoyl peroxide (BPO). It has reduced toxicity. Bisomer® PTE is extensively used to activate MMA based acrylic resins, styrene-based unsaturated polyesters and vinyl ester methacrylate formulations. It is ideal in a wide range of applications, including acrylic flooring, adhesives, chemical fixings, road-marking paints, anchor bolts and chemical mortars. view less
Borchi® Kat 0243 Borchers, A Company of OMG Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. Borchi® Kat 0243 accelerates the chemical reaction between the alcohol and isocyanate component of polyurethane coating systems, thus allowing optimum steering of the drying properties, both during force-drying and curing at room temperature. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less
Borchi® Kat 0244 Borchers, A Company of OMG Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. The use of Borchi® Kat 0244 ensures fast blocking stability of polyurethane coatings. It also improves solvent resistance, high film hardness and early sandability of the coating. This product is suitable for automotive refinishing. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less
Borchi® Kat 0245 Borchers, A Company of OMG Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyuret...view more Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. This product is suitable for automotive refinishing and industrial coating. In these formulations, Borchi® Kat 0245 is characterized by its very good and consistent activity and stability, even after prolonged storage. view less
Borchi® Kat 24 Borchers, A Company of OMG Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexi...view more Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. view less
Borchi® Kat 315 Borchers, A Company of OMG Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat...view more Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 315 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 315 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less
Borchi® Kat 320 Borchers, A Company of OMG Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be ...view more Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 320 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less
Borchi® OXY - Coat Borchers, A Company of OMG Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent resul...view more Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in all coatings which dry by oxidation, such as Alkyd, vegetable oils, epoxy esters, polybutadiene etc. view less
Borchi® OXY - Coat 1101 Borchers, A Company of OMG Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results...view more Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in any coating drying by oxidative crosslinking, e.g. alkyds, vegetable oils, epoxy esters, polybutadiene etc. view less
Request Sample Bulab® 600 Buckman Laboratories, Inc. Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is s...view more Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amines or tin catalysts. view less
Request Sample Bulab® 685 Buckman Laboratories, Inc. Bulab® 685 is an 85% active grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) for use as a catalyst in water-blown polyurethane foam. TMEDA is a difunctional tertiary amine with little steric hindrance. It is a catalyst for the reaction between water ...view more Bulab® 685 is an 85% active grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) for use as a catalyst in water-blown polyurethane foam. TMEDA is a difunctional tertiary amine with little steric hindrance. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 685 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amine or tin catalysts. view less
Butaflow BT-71 Estron Chemical, Inc. Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorp...view more Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorporated as a raw material during the premix stage of processing, and a laboratory investigation is recommended to optimize the concentration and processing conditions for a particular formulation. view less
CATALYST 704 ASK Chemicals Catalyst 704 is a relatively volatile tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Dehydrated air as well as nitrogen are suitable carrier gases. The gas stream takes up the catalyst which is then applied ...view more Catalyst 704 is a relatively volatile tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Dehydrated air as well as nitrogen are suitable carrier gases. The gas stream takes up the catalyst which is then applied into the coating drum onto the uncured Askocoat-polyurethane layer of the fertilizer granules. Curing of the Askocoat-layer occurs within seconds. Surplus catalyst should be disposed of properly, e.g. by means of an amine scrubber. view less
CATALYST 806 ASK Chemicals Catalyst 806 is a high reactive tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Catalyst 806 has a high flash point, shows low volatility and therefore, ATEX-equipment can be avoided in most cases. Catalyst 8...view more Catalyst 806 is a high reactive tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Catalyst 806 has a high flash point, shows low volatility and therefore, ATEX-equipment can be avoided in most cases. Catalyst 806 is applied as fine spray into the coating drum onto the uncured Askocoat-polyurethane layer of the fertilizer granules. Curing of the Askocoat-layer occurs within seconds. Catalyst 806 has functional end-groups that irreversibly react into the polyurethane coating. view less
Request Sample CATALYST K C404 DKSH CATALYST K C404 is a MASTERBATCH of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGI...view more CATALYST K C404 is a MASTERBATCH of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGIC or cured with glycidylesters. view less
Request Sample CATALYST K C405-SD DKSH CATALYST K C405-SD is a MASTERBATCH of a catalyst for carboxyl / epoxy reaction in a superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, c...view more CATALYST K C405-SD is a MASTERBATCH of a catalyst for carboxyl / epoxy reaction in a superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, cured with TGIC or with glycidylesters. view less
Request Sample CYCAT® 4040 Allnex CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to...view more CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems. view less
Request Sample CYCAT® 4045 Allnex CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluen...view more CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. view less
Request Sample CYCAT® 4107 Catalyst Allnex CYCAT 4107 catalyst is an amine-blocked p-toluenesulfonic acid in isopropanol. It is recommended for applications where a wrinkled or textured finish is desired with thermoset coatings crosslinked with highly alkylated amino resins, like CYMEL® 303 LF.
Request Sample CYCAT® 600 Allnex CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less
Request Sample CYCAT® 600A Allnex CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less
Request Sample CYCAT® 6020 Allnex CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor. view less
Request Sample CYCAT® 6030 Allnex CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor. view less
Request Sample CYCAT® 6051 Allnex CYCAT® 6051 is an extremely hydrophobic acid catalyst based on dinonylnaphthalene sulfonic acid supplied at 50% active in n-butanol. It is an oil soluble sulfonic acid that gives excellent humidity resistance in high bake amino and phenolic systems.
Request Sample CYCAT® 6925 CATALYST Allnex CYCAT® 6925 is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermose...view more CYCAT® 6925 is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermoset systems. This product can be used in food contact applications. view less
Request Sample CYCAT® VXK 6364 Allnex Cycat® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like Maprenal MF 904/97. Post curing of films containing Cycat® VXK 6364 can occur. Cycat® VXK 6364 is usabl...view more Cycat® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like Maprenal MF 904/97. Post curing of films containing Cycat® VXK 6364 can occur. Cycat® VXK 6364 is usable in solvent and waterborne thermosetting vehicles. view less
Request Sample CYCAT® VXK 6395 Allnex CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive syste...view more CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive systems. view less
Request Sample CYCAT® XK 406 N Allnex Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion prop...view more Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems. view less
Calamine BP Huntsman Pigments & Additives Calamine BP is a pink odorless powder, consisting of Basic Zinc Carbonate tinted with a small amount of red iron oxide pigment. It is manufactured without a solution step, and therefore has no by-product salt contamination. This product is insoluble in w...view more Calamine BP is a pink odorless powder, consisting of Basic Zinc Carbonate tinted with a small amount of red iron oxide pigment. It is manufactured without a solution step, and therefore has no by-product salt contamination. This product is insoluble in water but soluble in dilute acids. view less
Chicure® 764 Double Bond Chemical Ind., Co., Ltd. Chicure® 764 is an ammonium salt catalyst that decomposes to tertial amine during high temperature processes, reducing the reaction energy of carboxylic with epoxied group, lowering curing temperature.
Chicure® AAA Double Bond Chemical Ind., Co., Ltd. Chicure® AAA is a white crystalline powder that is soluble in benzene, toluene, and xylene. It is used as a hardening accelerator for epoxy, phenol, silicone, and acrylic resins.
Chicure® TPP Double Bond Chemical Ind., Co., Ltd. Chicure® TPP is a widely used metal complex and phase transfer catalysts for organic and polymerization reactions.
Chrome Nitrate Solution, 11.5% Chrome McGean-Rohco, Inc. Chrome Nitrate Solution, 11.5% Chrome is used in pigments, metal finishing, and catalyst applications.
Chrome Nitrate Solution, 8.5% Chrome McGean-Rohco, Inc. Chrome Nitrate Solution, 8.5% Chrome is used in catalysts, pigments, metal finishing, and catalyst applications.
Chrome Nitrate Solution, 9.6% Chrome McGean-Rohco, Inc. Chrome Nitrate Solution, 9.6% Chrome is used in pigments, metal finishing, and catalyst applications.
Chromic Acetate Solution McGean-Rohco, Inc. Chromic Acetate Solution is used in pigments, drilling muds, textile mordants, leather tanning, and as catalysts for oxidation, polymerization, and emulsion hardening.
Chromic Acid Qingdao Sun Chemical Corporation Limited Chromic Acid is widely used in chromium plating, wood preservation, medicine, catalyst, pigment, oxidizing agent, glass coloring and mordant of textile, as well as in material producing oxidative catalyst. This product is supplied in dark red flakes, has ...view more Chromic Acid is widely used in chromium plating, wood preservation, medicine, catalyst, pigment, oxidizing agent, glass coloring and mordant of textile, as well as in material producing oxidative catalyst. This product is supplied in dark red flakes, has a melting point of 197°C(starts to decompose), and has a specific gravity of 2.70g/cm^3. It has strong oxidation, deliquescer readily in air, and highly soluble in water. view less
Chromium Acetylacetonate McGean-Rohco, Inc. Chromium Acetylacetonate is used in the preparation of organic chromium compounds, especially for use as catalysts. This compound is very soluble in most organic solvents including Isopropyl Alcohol, Toluene, Methanol, but this compound is not readily sol...view more Chromium Acetylacetonate is used in the preparation of organic chromium compounds, especially for use as catalysts. This compound is very soluble in most organic solvents including Isopropyl Alcohol, Toluene, Methanol, but this compound is not readily soluble in water. view less
Chromium Tartrate Solution McGean-Rohco, Inc. Chromium Tartrate Solution is used as mordants in textile dyeing, chrome conversion coatings, hydrogenation catalysts and anti-foulants for oil field applications.
D-70 BlueSky Chemical Co., Ltd. D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml.
DABCO® DC 1 Evonik Operations GmbH, BL Comfort & Insulation DABCO® DC 1 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure.
DABCO® DC 2 Evonik Operations GmbH, BL Comfort & Insulation DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reac...view more DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reactive than DABCO® DC 1. view less
DABCO® MB 20 Evonik Operations GmbH, BL Comfort & Insulation DABCO® MB 20 is a bismuth-based gel catalyst developed for a wide range of urethane formulations. It does not contain 2-EHA, DBT or TBT.
DABCO® NE 1070 Evonik Operations GmbH, BL Comfort & Insulation DABCO® NE 1070 is a low emission gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG.
DABCO® NE 1091 Evonik Operations GmbH, BL Comfort & Insulation DABCO® NE 1091 is a highly efficient low emissive gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. It can be used to improve humid aging properties.
DABCO® NE 300 Evonik Operations GmbH, BL Comfort & Insulation DABCO® NE 300 is a highly efficient low emissive blow catalyst suitable for replacement of BDMAEE catalysts.
DABCO® T 12 Evonik Operations GmbH, BL Comfort & Insulation DABCO® T 12 is a dibutyltin dilaurate. Strong gel catalyst. Moderate hydrolytic stability.
DABCO® T 120 Evonik Operations GmbH, BL Comfort & Insulation DABCO® T 120 is a strong gel catalyst with good hydrolytic stability.
DABCO® T 131 Evonik Operations GmbH, BL Comfort & Insulation DABCO® T 131 is a strong gel catalyst with good hydrolytic stability which provides a more delayed action than DBTDL.
DMAMP-80® ANGUS Chemical Company DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less
Drocure™ 5130 D.R. Coats Ink & Resins Pvt. Ltd. Drocure™ 5130 is a versatile Lewis based catalyst for curing of Epoxy Resins. It is a technical grade of tris-(dimethylaminomethyl) phenol.
ECAT-243 Designer Molecules ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications.
ECAT-259 Designer Molecules ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...view more ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. view less
ECAT-353 Designer Molecules ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...view more ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. view less
ECAT-434 Designer Molecules ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...view more ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. view less
EXOCOAT™ 151A Axcentive Sarl EXOCOAT™ 151A by Axcentive is a doped sol-gel based nanotitanium oxide with an excellent self-cleaning performance. When applied as a spray it forms a nanolayer, which is super hydrophilic and photocatalytic to render substrates into hygienic surfaces. Th...view more EXOCOAT™ 151A by Axcentive is a doped sol-gel based nanotitanium oxide with an excellent self-cleaning performance. When applied as a spray it forms a nanolayer, which is super hydrophilic and photocatalytic to render substrates into hygienic surfaces. The photocatalytic effect results in effective free-radical formation which breaks down organic matter such as dirt and soil. Airborne particles such as volatile organic and nitrous oxide compounds (VOCs, NOx) are also eradicated by EXOCOAT™ 151A. EXOCOAT™ 151A has a very low activation energy to perform and will show its performance already under visible light. EXOCOAT™ 151A should be used as a topcoat. Intended uses are for metal, glass and ceramic surfaces. view less
EXOCOAT™ 151B Axcentive Sarl EXOCOAT™ 151B by Axcentive is a doped sol-gel based nanotitanium oxide with an excellent self-cleaning performance. When applied as a spray it forms a nanolayer, which is super hydrophilic and photocatalytic to render substrates into hygienic surfaces. Th...view more EXOCOAT™ 151B by Axcentive is a doped sol-gel based nanotitanium oxide with an excellent self-cleaning performance. When applied as a spray it forms a nanolayer, which is super hydrophilic and photocatalytic to render substrates into hygienic surfaces. The photocatalytic effect results in effective free-radical formation which breaks down organic matter such as dirt and soil. Airborne particles such as volatile organic and nitrous oxide compounds (VOCs, NOx) are also eradicated by EXOCOAT™ 151B. EXOCOAT™ 151B has a very low activation energy to perform and will show its performance already under visible light. EXOCOAT™ 151B should be used as a topcoat. Intended uses are for porous surfaces as concrete, stone and pigmented wall renders. view less
Escat™ 110 Estron Chemical, Inc. Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy,...view more Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, and polyesters cured by GMA functional acrylics. Escat™ 110's benefits include that it is to reduce the cure temperature of a particular system, or shorten the required bake time at a given cure temperature. view less
Escat™ 22 Estron Chemical, Inc. Escat™ 22 is a powder coating additive capable of improving the mechanical and solvent resistance properties. Escat™ 22 can be used in matte polyester powder coatings cured with the Isocryl matting hardeners EP-550, EP-560 and EP-570.
Escat™ 50 Estron Chemical, Inc. Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction...view more Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems as well. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy and polyesters cured by GMA-functional acrylics. Polyester-TGIC and polyester-PT-910 reactions can also be accelerated. Escat™ 50 can reduce the cure temperature of a particular system or shorten the required bake time at a given cure temperature without sacrificing DOI or flow and leveling properties. view less
Escat™ 60 Estron Chemical, Inc. Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 6...view more Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 60 include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, polyesters cured by GMA-functional acrylics, polyester-TGIC and polyester-PT-910. Escat™ 60 reduces the cure temperature of a particular system and shortens the required bake time at a given cure temperature when compared to non-catalyzed systems. view less
Ferric Chloride Anhydrous Qingdao Sun Chemical Corporation Limited Ferric Chloride Anhydrous is mainly used for the engraving etching of electronic circuit board or purify drink water and treat waste water. It is also used to make other iron salts, oxidant, catalyst, mordant and ink. In addition, it is used in constructi...view more Ferric Chloride Anhydrous is mainly used for the engraving etching of electronic circuit board or purify drink water and treat waste water. It is also used to make other iron salts, oxidant, catalyst, mordant and ink. In addition, it is used in construction field. This product is a brown crystal with a molecular weight of 162.21, an insoluble substance content of < 1.5%, and a ferric chloride of > 96.0%. view less
Hycat™ 2000S Dimension Technology Chemical Systems, Inc. Hycat™ 2000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These...view more Hycat™ 2000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. view less
Hycat™ 3000S Dimension Technology Chemical Systems, Inc. Hycat™ 3000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These...view more Hycat™ 3000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. Hycat™ 3000S has additional cure-system modifiers that improves the solubility characteristics in difficult epoxy-anhydride formulas resulting in uniform cures. view less
Hycat™ AC-4 Dimension Technology Chemical Systems, Inc. Hycat™ AC-4 is a liquid epoxy catalyst whose performance is similar to Hycat™ 3100S but, on average, has slightly faster gel times while providing a more even distribution of the heat evolved from a polymer reaction. It accelerates materials with monomeri...view more Hycat™ AC-4 is a liquid epoxy catalyst whose performance is similar to Hycat™ 3100S but, on average, has slightly faster gel times while providing a more even distribution of the heat evolved from a polymer reaction. It accelerates materials with monomeric, dimeric or polymeric functional groups and will perform very well in the presence of a number of popular additives and toughening agents. It is recommended for use in epoxy/anhydride formulations. view less
Hycat™ AO-4 Dimension Technology Chemical Systems, Inc. Hycat™ AO-4 is a colorless liquid epoxy catalyst used to accelerate the reaction of epoxy resins with various anhydrides. It is easy to handle, load, and adjust and can be readily cleaned up with typical organic solvents or degreasers. By using compounds ...view more Hycat™ AO-4 is a colorless liquid epoxy catalyst used to accelerate the reaction of epoxy resins with various anhydrides. It is easy to handle, load, and adjust and can be readily cleaned up with typical organic solvents or degreasers. By using compounds with monomeric, dimeric or poly functional groups, the degree of cross-linking and therefore the mechanical properties of the resulting product can be advantageously modified. It is recommended for use in epoxy/anhydride formulations. view less
Hycat™ OA Dimension Technology Chemical Systems, Inc. Hycat™ OA is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These ca...view more Hycat™ OA is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. Hycat™ OA was developed to meet certain European regulatory requirements; especially products that may come in contact with humans, e.g., toys, packaging, laminates, etc. view less
Hycat™ SM-3 Dimension Technology Chemical Systems, Inc. Hycat™ SM-3 is a liquid epoxy catalyst. It's performance is similar to our flagship anhydride catalyst, Hycat™ 3100S, but was specially formulated to perform better at higher cure temperatures. It provides a more even distribution of the heat evolved from...view more Hycat™ SM-3 is a liquid epoxy catalyst. It's performance is similar to our flagship anhydride catalyst, Hycat™ 3100S, but was specially formulated to perform better at higher cure temperatures. It provides a more even distribution of the heat evolved from a polymer reaction leading to the production of consistently uniform cures that are free from cracks and voids. It is recommended for use in epoxy/anhydride formulations. view less
JEFFADD™ B 650 Huntsman Performance Products JEFFADD™ B 650 additive is a catalytic polyol derived from renewable raw materials. The low-odor product, which is completely water soluble, is specifically designed for use in a variety of urethane foam applications. The autocatalytic nature of JEFFADD B...view more JEFFADD™ B 650 additive is a catalytic polyol derived from renewable raw materials. The low-odor product, which is completely water soluble, is specifically designed for use in a variety of urethane foam applications. The autocatalytic nature of JEFFADD B 650 additive allows for reduced catalyst requirements. Its high water solubility and high bio content make it an ideal choice for low-density polyurethane spray applications. view less
K-CURE® 1040 King Industries, Inc. K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatin...view more K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatings, appliance finishes, and printing inks. view less
K-CURE® 1040W King Industries, Inc. K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water sys...view more K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water systems. It is soluble in water, alcohol, and also glycols. This product can be applied to water based wood coatings, paper coatings, and printing inks. view less
K-CURE® 129B King Industries, Inc. K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal sub...view more K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal substrates because of its corrosive nature. This product offer fast curing, and high acid value which allows lower does levels. This is a product that is soluble in water, alcohol, and glycols. It can be applied to wood, paper, and plastic coatings. view less
K-KAT® 348 King Industries, Inc. K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...view more K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. view less
K-KAT® 4205 King Industries, Inc. K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack fr...view more K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack free time along with good viscosity stability. It is effective at low metal concentrations and also effective with a mix of isocyanates and polycols. K-KAT® 4205 is soluble in ketones, aromatic hydrocarbons, and esters. It can be applied to automotive topcoats, maintenance coatings, structural plastics coatings, and aerospace coatings. view less
K-KAT® 5218 King Industries, Inc. K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the ...view more K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the addition of 2,4-pentanedione, fast tack free time, exterior durability, and is effective with a variety of isocyanates and polyols. It appears as a slightly hazy, amber liquid and can be applied in automotive topcoats, aerospace coatings, maintenance coatings, and coatings for structural plastics. This product is soluble in ketones, esters, glycol ethers, alcohols, and aromatic hydrocarbons. view less
K-KAT® 6212 King Industries, Inc. K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability a...view more K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability along with a short tack free time. This product doesn't add to the hydrolysis of polyester resins and high selectivity for NCO/OH reactions over NCO/water reaction. It is soluble in esters, alcohols, ketones, aliphatic and aromatic hydrocarbons, glycol ethers, and glycol ether acetates. It is only partially soluble in water. It can be applied to adhesives, polyurethane coatings, casting resins and polyurethane resin synthesis, RIM, and water-based two component coatings. view less
K-KAT® 670 King Industries, Inc. K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be...view more K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be applied in ambient cured 1 component organosilane and 2 component organosilane hybrid coatings, caulks, adhesives, elastomers, and sealants. view less
K-KAT® XC-B221 King Industries, Inc. K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawb...view more K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawbacks. This product offers good glass retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. K-KAT® XC-B221 is soluble in butanol, ethanol, methanol, isopropanol, glycol ethers, glycol ether acetates, aliphatic and aromatic hydrocarbons, and is insoluble in water. This product appears as a clear, straw liquid and can be applied in 2K, blocked isocyanate coatings, urethane elastomers, foams, coatings, and cationic electro-coatings. view less
K-KAT® XK-614 King Industries, Inc. K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing...view more K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing time qualities. It also has good hydrolytic stability and exterior durability. This product has non-yellowing ability and great gloss retention characteristics. It appears as a light, yellow liquid, is soluble in alcohols, and is insoluble in water. view less
K-KAT® XK-617 King Industries, Inc. K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant withou...view more K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant without the concern of toxicity. It appears as a pale, light amber liquid, offers good cure response, and is environmentally more acceptable. This product is soluble in glycol ethers, n-butanol, ketones, aliphatics. aromatics, and is partially soluble in water. It is normally applied in 2K urethanes for cast elastomers. view less