AP-Cat 0040 | FTC Korea Co.,Ltd | AP-Cat 0040 is an amorphous white solid for transesterification and esterification. It is a hydrolytically stable, versatile, neutral catalyst. It is suitable for use in polyester powder coatings, alkyd resins, and general industrial coatings. | Request Sample |
AP-Cat 0043 | FTC Korea Co.,Ltd | AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and ...view more AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and PVC and general industrial coatings. view less | Request Sample |
AP-Cat 0043L | FTC Korea Co.,Ltd | AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and ...view more AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and PVC and general industrial coatings. view less | Request Sample |
DABCO® MB 20 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® MB 20 is a bismuth-based gel catalyst developed for a wide range of urethane formulations. It does not contain 2-EHA, DBT or TBT. | |
DABCO® NE 1070 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1070 is a low emission gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. | |
DABCO® NE 1091 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1091 is a highly efficient low emissive gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. It can be used to improve humid aging properties. | |
DABCO® NE 300 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 300 is a highly efficient low emissive blow catalyst suitable for replacement of BDMAEE catalysts. | |
DABCO® T 12 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 12 is a dibutyltin dilaurate. Strong gel catalyst. Moderate hydrolytic stability. | |
DABCO® T 120 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 120 is a strong gel catalyst with good hydrolytic stability. | |
DABCO® T 131 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 131 is a strong gel catalyst with good hydrolytic stability which provides a more delayed action than DBTDL. | |
EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
KOSMOS® T 100 | Evonik Operations GmbH, BL Comfort & Insulation | KOSMOS® T 100 is the strongest gel catalyst particularly suitable for fast curing applications such as spray coatings and RIM. | |
POLYCAT® DBU | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® DBU is a strong gel catalyst that provides snap cure at ambient temperature. | |
POLYCAT® SA 1 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 1 is an acid-free heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. | |
POLYCAT® SA 102 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 102 is a heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. Is has higher de-blocking temperature and longer pot life time than POLYCAT® SA 1. | |
POLYCAT® SA 2 LE | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 2 LE is a low emission heat activated catalyst that exhibits a front end delay with rapid back end-cure. | |
POLYCAT® SA 20 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 20 is a DBT-free low emission gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. | |
POLYCAT® SA 5 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 5 is a gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It is recommended to use in conjunction with DABCO® BA 100 to improve pot life time. | |
POLYCAT® SA 8 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 8 is a heat activated co-catalyst with an excellent front-end delay. |