UL Prospector
Prospector

Success!

Successfully saved your search
67 Results
(1) NATCATalyst 140 NiCHEM CORP. NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol.
(2) NATCATalyst 170 NiCHEM CORP. NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less
(3) FASTCATaylst B25 NiCHEM CORP. FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less
(4) NATCATalyst 140B NiCHEM CORP. NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol.
(5) NATCATalyst 229B NiCHEM CORP. NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less
(6) NATCATalyst 229W NiCHEM CORP. NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less
ACURE™ 500 Allnex ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...view more ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. view less Request Sample
Butaflow BT-71 Estron Chemical, Inc. Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorp...view more Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorporated as a raw material during the premix stage of processing, and a laboratory investigation is recommended to optimize the concentration and processing conditions for a particular formulation. view less
BYK®-CATALYST 450 BYK BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especiall...view more BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especially low reactive melamine formaldehyde resins of HMMM-type need an accelerator to lower the curing temperature or to reduce the baking time. In comparison with pure para-toluenesulfonic acid, the product shows considerably lower viscosity increase on storage which can extend shelf life 1,5 - 3 times. The additive allows a 10 to 20°C lower baking temperature compared to other blocked para-TSA catalysts (such as those with morpholine or aminomethylpropanol). view less Request Sample
Chromic Acid Qingdao Sun Chemical Corporation Limited Chromic Acid is widely used in chromium plating, wood preservation, medicine, catalyst, pigment, oxidizing agent, glass coloring and mordant of textile, as well as in material producing oxidative catalyst. This product is supplied in dark red flakes, has ...view more Chromic Acid is widely used in chromium plating, wood preservation, medicine, catalyst, pigment, oxidizing agent, glass coloring and mordant of textile, as well as in material producing oxidative catalyst. This product is supplied in dark red flakes, has a melting point of 197°C(starts to decompose), and has a specific gravity of 2.70g/cm^3. It has strong oxidation, deliquescer readily in air, and highly soluble in water. view less
CYCAT® 296-9 Allnex CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ran...view more CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked. view less Request Sample
CYCAT® 4040 Allnex CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to...view more CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems. view less Request Sample
CYCAT® 4045 Allnex CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluen...view more CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. view less Request Sample
CYCAT® 500 Allnex CYCAT® 500 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CY...view more CYCAT® 500 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT® 500 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT® 500 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT® 500 is a free acid, package stability could be adversely impacted. view less Request Sample
CYCAT® 600A Allnex CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less Request Sample
CYCAT® 6020 Allnex CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor. view less Request Sample
CYCAT® 6030 Allnex CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor. view less Request Sample
CYCAT® 6051 Allnex CYCAT® 6051 is an extremely hydrophobic acid catalyst based on dinonylnaphthalene sulfonic acid supplied at 50% active in n-butanol. It is an oil soluble sulfonic acid that gives excellent humidity resistance in high bake amino and phenolic systems. Request Sample
CYCAT® 655 CATALYST Allnex CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYC...view more CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT 655 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT 655 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT 655 is a free acid, package stability could be adversely impacted. view less Request Sample
CYCAT® 6925 Allnex CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are ...view more CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermoset systems. This product can be used in food contact applications. For the latest information about the compliance status with FDA, EU, Chinese or other food regulations. view less Request Sample
CYCAT® VXK 6364 Allnex CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in s...view more CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in solvent and waterborne thermosetting vehicles. view less Request Sample
CYCAT® VXK 6395 Allnex CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive syste...view more CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive systems. view less Request Sample
CYCAT® XK 406 N Allnex Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion prop...view more Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems. view less Request Sample
K-CURE® 1040 King Industries, Inc. K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatin...view more K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatings, appliance finishes, and printing inks. view less
K-CURE® 1040W King Industries, Inc. K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water sys...view more K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water systems. It is soluble in water, alcohol, and also glycols. This product can be applied to water based wood coatings, paper coatings, and printing inks. view less
K-CURE® 129B King Industries, Inc. K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal sub...view more K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal substrates because of its corrosive nature. This product offer fast curing, and high acid value which allows lower does levels. This is a product that is soluble in water, alcohol, and glycols. It can be applied to wood, paper, and plastic coatings. view less
NACURE® 1051 King Industries, Inc. NACURE® 1051 is a hydrophobic acid stimulant that is based on dinonylnaphthalene sulfonic acid supplied at 50% active in 2-Butoxyethanol. It is an oil soluble sulfonic acid that provides humidity resistance in high bake amino and phenolic systems.
NACURE® 1323 King Industries, Inc. NACURE® 1323 is a hydrophobic amine neutralized Dinonylnaphthalenesulfonic acid (DNNSA) stimulant. It has been created to give maximum solubility, package stability and electrical resistance. Since DNNSA is a weaker acid than DNNDSA, it is more applicable...view more NACURE® 1323 is a hydrophobic amine neutralized Dinonylnaphthalenesulfonic acid (DNNSA) stimulant. It has been created to give maximum solubility, package stability and electrical resistance. Since DNNSA is a weaker acid than DNNDSA, it is more applicable for higher cure temperature applications. This product is soluble in alcohol, water, glycol ethers, and esters. It can be applied in coil coatings, electrostatic spray, electrocoating, and general industrials. view less
NACURE® 1419 King Industries, Inc. NACURE® 1419 is a covalently blocked Dinonylnaphthalenesulfonic acid (DNNSA) stimulant. The polymeric moiety stays in the system and is capable of responding with the crosslinking agent. It offers low conductivity, good salt spray properties and adhesion,...view more NACURE® 1419 is a covalently blocked Dinonylnaphthalenesulfonic acid (DNNSA) stimulant. The polymeric moiety stays in the system and is capable of responding with the crosslinking agent. It offers low conductivity, good salt spray properties and adhesion, and is hardly affected by pigment absorption. This product is not soluble in water. It can be applied in electrostatic spray, can coatings, coil coatings, electrocoat, and metal decorating. This product appears as a clear and dark liquid. view less
NACURE® 155 King Industries, Inc. NACURE® 155 is a hydrophobic sulfonic acid catalyst featuring excellent water, salt, and detergent resistance, superior adhesion, and low conductivity. It is primarily used as a catalyst in the curing of hydroxy, carboxy, and amide functional polymers wit...view more NACURE® 155 is a hydrophobic sulfonic acid catalyst featuring excellent water, salt, and detergent resistance, superior adhesion, and low conductivity. It is primarily used as a catalyst in the curing of hydroxy, carboxy, and amide functional polymers with melamine and urea-formaldehyde crosslinking agents. Common applications include waterborne can coatings, automotive primers, printing inks, electrocoatings, coil coatings, and appliance finishes. view less
NACURE® 1557 King Industries, Inc. NACURE® 1557 appears as a clear and dark liquid. It is an amine blocked Dinonylnaphthalenesulfonic acid (DNNSA) stimulant uniquely made for decreased blistering in thicker films that are cured at higher temperatures. This product erases solvent popping in...view more NACURE® 1557 appears as a clear and dark liquid. It is an amine blocked Dinonylnaphthalenesulfonic acid (DNNSA) stimulant uniquely made for decreased blistering in thicker films that are cured at higher temperatures. This product erases solvent popping in high bake thick films and offers low conductivity, excellent humidity, and detergent resistance. It is soluble in alcohol, glycols, esters, glycol ethers, ketones, aromatic and aliphatic hydrocarbons. It is not soluble in water. It can be applied to things such as electrostatic spray, general industrials, can coatings, coil coatings, and appliance finishes. view less
NACURE® 1953 King Industries, Inc. NACURE® 1953 is an amine blocked DNNSA stimulant and appears as a clear amber liquid. This is a product that is made to be applied in higher bake amino crosslinked systems like metal decorating, coil coatings and can also be applied in things such as elec...view more NACURE® 1953 is an amine blocked DNNSA stimulant and appears as a clear amber liquid. This is a product that is made to be applied in higher bake amino crosslinked systems like metal decorating, coil coatings and can also be applied in things such as electrocoating and appliance finishes. This product is resistant to detergent, overbake, humidity, and offers great flow and leveling, along with good solubility in organic solvents. NACURE® 1953 is soluble in aliphatic and aromatic hydrocarbons, alcohol, ketones, esters, glycol ethers and is insoluble in water. view less
NACURE® 2107 King Industries, Inc. NACURE® 2107 appears as a clear, straw liquid and is an amine counterbalanced para-Toluenesulfonic (p-TSA) stimulant that is made for fast cure response. It improves metal scratch resistance of acid catalyzed formulations and offers waterborne or high sol...view more NACURE® 2107 appears as a clear, straw liquid and is an amine counterbalanced para-Toluenesulfonic (p-TSA) stimulant that is made for fast cure response. It improves metal scratch resistance of acid catalyzed formulations and offers waterborne or high solids coatings. This product can be applied to general industrials, appliance finishes, and coil coatings. It is soluble in alcohols, ethers, water, and glycols, partially soluble in ketones and aromatic hydrocarbons, and insoluble in aliphatic hydrocarbons. view less
NACURE® 2500 King Industries, Inc. NACURE® 2500 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid and is made for low temperature curing and maximum viscosity stability. It offers good cure response, exterior durability, and waterborne o...view more NACURE® 2500 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid and is made for low temperature curing and maximum viscosity stability. It offers good cure response, exterior durability, and waterborne or high solids coatings. This product is soluble in alcohols, glycol ethers, glycols, and water, partially soluble in ketones, and insoluble in aliphatic and aromatic hydrocarbons. It can be applied in general industrials, appliance finishes, automotive topcoats, and coil coatings. view less
NACURE® 2501 King Industries, Inc. NACURE® 2501 is an amine blocked Toluenesulfonic acid (TSA) stimulant that has been made for higher electrical resistivity and appears as a clear, straw liquid. It can be applied in electrostatic spray coatings, automotive topcoats, General industrials, a...view more NACURE® 2501 is an amine blocked Toluenesulfonic acid (TSA) stimulant that has been made for higher electrical resistivity and appears as a clear, straw liquid. It can be applied in electrostatic spray coatings, automotive topcoats, General industrials, and coil coatings. This product is soluble in alcohols, glycol ethers, glycols, esters, aromatic hydrocarbons, and especially ketones. It is insoluble in water and aliphatic hydrocarbons. view less
NACURE® 2530 King Industries, Inc. NACURE® 2530 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant and appears as a clear, straw liquid. It has a low pH which allows for faster cure and reduces the potential of wrinkling from volatile amines, particularly at cure temperatures...view more NACURE® 2530 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant and appears as a clear, straw liquid. It has a low pH which allows for faster cure and reduces the potential of wrinkling from volatile amines, particularly at cure temperatures of 121° C (250° F) or higher. This product can be applied in appliance finishes, coil coatings, can coatings, wood coatings, paper coatings, automotive topcoats, and general industrials. It is soluble in alcohols, esters, glycols, glycol ethers, and water. It is partially soluble in ketones and insoluble in aliphatic and aromatic hydrocarbons. view less
NACURE® 2547 King Industries, Inc. NACURE® 2547 appears as a clear, transparent liquid and is an amine blocked para -Toluenesulfonic acid (p-TSA) stimulant that is diluted with water for easier incorporation into water-based systems. It offers good cure response and viscosity stability and...view more NACURE® 2547 appears as a clear, transparent liquid and is an amine blocked para -Toluenesulfonic acid (p-TSA) stimulant that is diluted with water for easier incorporation into water-based systems. It offers good cure response and viscosity stability and is usually applied in water-based general industrials. This product is soluble in alcohols, glycols, water, glycol ethers and it is insoluble in ketones, esters, aromatic and aliphatic hydrocarbons. view less
NACURE® 2558 King Industries, Inc. NACURE® 2558 is a partially amine counterbalanced para-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid. It mixes a higher boiling solvent with a higher temperature dissociating amine to create a stimulant that is especially ef...view more NACURE® 2558 is a partially amine counterbalanced para-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid. It mixes a higher boiling solvent with a higher temperature dissociating amine to create a stimulant that is especially effective in controlling wrinkling, popping and blistering in high solids coatings. It is soluble in alcohols, water, glycols, glycol ethers, and is insoluble in aliphatic and aromatic hydrocarbons, esters, and ketones. This product can be applied in automotive finishes, waterborne coatings, coil coatings, and general industrials. view less
NACURE® 3327 King Industries, Inc. NACURE® 3327 appears as a clear transparent dark liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that has been created to provide enganced solubility when compared to other amine blocked DNNDSA stimulants. NACURE 33...view more NACURE® 3327 appears as a clear transparent dark liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that has been created to provide enganced solubility when compared to other amine blocked DNNDSA stimulants. NACURE 3327 offers a combination of package stability and cure response. This product has good adhesion, solubility, and corrosion resistance. It is applied to metal decorating coil coatings. electrostatic spray, and general industrials. It is soluble in alcohol, water, glycols, and glycol ethers. view less
NACURE® 3525 King Industries, Inc. NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, esp...view more NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, especially in high solids polyester and alkyd formulations. It offers good ahesion, salt spray and water resistance, and no wrinkling. It is soluble in water, alcohol, glycol ethers, ketones, and glycols. It is usually applied in metal decorating, automotive topcoats, coil coatings, can coatings, appliance finishes, general industrials, and electrostatic spray. view less
NACURE® 4000 King Industries, Inc. NACURE® 4000 appears as a clear and transparent light straw liquid. It is an alkyl acid phosphate stimulant. It is a weak acid catalyst recommended for use with high-NH/polymeric melamines and phenolic crosslinkers. It offers broad solubility in glycols, ...view more NACURE® 4000 appears as a clear and transparent light straw liquid. It is an alkyl acid phosphate stimulant. It is a weak acid catalyst recommended for use with high-NH/polymeric melamines and phenolic crosslinkers. It offers broad solubility in glycols, ethers, ketones, and also aromatic and water hydrocarbons. This product can be applied to general industrials, wood coatings, and plastic coatings. view less
NACURE® 4054 King Industries, Inc. NACURE® 4054 is a hydrophobic alkyl acid phosphate stimulant supplied at 50% active in isobutanol. It is a weak acid stimulant that is recommended to be used with high -NH/polymeric melamines and phenolic crosslinkers. This product offers great solubility...view more NACURE® 4054 is a hydrophobic alkyl acid phosphate stimulant supplied at 50% active in isobutanol. It is a weak acid stimulant that is recommended to be used with high -NH/polymeric melamines and phenolic crosslinkers. This product offers great solubility, adhesion, and water resistance. It is designed to be applied to things such as, appliance finishes, topcoats, primers, and wood finishes. view less
NACURE® 4167 King Industries, Inc. NACURE® 4167 is an amine offset phosphate stimulant. It is an acid stimulant that is fragile and especially effective with polymeric or high imino melamines and phenolics. This product appears as a clear, straw liquid and offers good stability, water resi...view more NACURE® 4167 is an amine offset phosphate stimulant. It is an acid stimulant that is fragile and especially effective with polymeric or high imino melamines and phenolics. This product appears as a clear, straw liquid and offers good stability, water resistance, and solubility. It is soluble in esters, water, ketones, alcohols, glycol ethers, aliphatic and aromatic hydrocarbons. It can be applied in automotive, general industrials, and water-based coatings. view less
NACURE® 4575 King Industries, Inc. NACURE® 4575 is an amine offset acid phosphate stimulant suggested for use in coatings that are crosslinked with fully or partially alkylated amino resins. This product offers resistance to coatings exposed to environmental acids, good stability with poly...view more NACURE® 4575 is an amine offset acid phosphate stimulant suggested for use in coatings that are crosslinked with fully or partially alkylated amino resins. This product offers resistance to coatings exposed to environmental acids, good stability with polymetric amino resins, water resistance, and good solubility. It is soluble in alcohols, esters, water, glycol ethers, partially soluble in ketones, and insoluble in aliphatic and aromatic hydrocarbons. NACURE® 4575 appears as a clear, light straw liquid and can be applied in coil coatings and automotive primers, clear coats, and base coats. view less
NACURE® 5076 King Industries, Inc. NACURE® 5076 is a strong acid stimulant that is based on Dodecylbenzenesulfonic acid (DDBSA) supplied at 70% active in Isopropanol. This product is soluble in alcohols, glycol ethers, glycols, esters, ketones and aliphatic hydrocarbons. It can also be app...view more NACURE® 5076 is a strong acid stimulant that is based on Dodecylbenzenesulfonic acid (DDBSA) supplied at 70% active in Isopropanol. This product is soluble in alcohols, glycol ethers, glycols, esters, ketones and aliphatic hydrocarbons. It can also be applied in can coatings, paper coatings, and printing inks. view less
NACURE® 5225 King Industries, Inc. NACURE® 5225 is an amine counterbalanced Dodecylbenzenesulfonic acid (DDBSA) stimulant and appears as a clear, light color liquid. This product offers good exterior durability, viscosity stability, and broad solubility. It is soluble in aliphatic and arom...view more NACURE® 5225 is an amine counterbalanced Dodecylbenzenesulfonic acid (DDBSA) stimulant and appears as a clear, light color liquid. This product offers good exterior durability, viscosity stability, and broad solubility. It is soluble in aliphatic and aromatic hydrocarbons, alcohol, glycols, glycol ethers, water, ketones, and esters. It can be applied to things such as general industrials, automotive topcoats, and can coatings. view less
NACURE® 5414 King Industries, Inc. NACURE® 5414 appears as a clear, amber liquid and is a polymeric blocked sulfonic acid ester stimulant suggested for use with amino crosslinking resins. It can be applied to electrostatic spray applications, automotive topcoats, and general industrials. N...view more NACURE® 5414 appears as a clear, amber liquid and is a polymeric blocked sulfonic acid ester stimulant suggested for use with amino crosslinking resins. It can be applied to electrostatic spray applications, automotive topcoats, and general industrials. NACURE® 5414 offers great intercoat adhesion, better solubility, humidity resistance, and low conductivity that is necessary for electrostatic spray applications. This product is soluble in aliphatic and aromatic hydrocarbons, glycol ethers, glycols, esters, alcohols, and ketones. It is insoluble in water and although it is soluble in alcohols they should be avoided because they may have a negative impact on stimulant stability. view less
NACURE® 5528 King Industries, Inc. NACURE® 5528 is an amine blocked Dodecylbenzenesulfonic acid (DDBSA) stimulant that appears as a clear, straw liquid. This product offers good exterior durability, viscosity stability, and broad solubility. It is soluble in aliphatic and aromatic hydrocar...view more NACURE® 5528 is an amine blocked Dodecylbenzenesulfonic acid (DDBSA) stimulant that appears as a clear, straw liquid. This product offers good exterior durability, viscosity stability, and broad solubility. It is soluble in aliphatic and aromatic hydrocarbons, alcohols, ketones, glycol ethers, glycols, esters, and water. NACURE® 5528 is typically applied in can coatings, automotive topcoats, and general industrials. view less
NACURE® 5925 King Industries, Inc. NACURE® 5925 is an amine counterbalanced DDBSA stimulant and appears as a clear, light amber liquid. It is made to meet the needs of FDA 21 CFR Section 175.300 (paragraph (b) (3) xiii (a) (b) and xii (a) (b)) concerning chemicals for use in resinous and p...view more NACURE® 5925 is an amine counterbalanced DDBSA stimulant and appears as a clear, light amber liquid. It is made to meet the needs of FDA 21 CFR Section 175.300 (paragraph (b) (3) xiii (a) (b) and xii (a) (b)) concerning chemicals for use in resinous and polymeric coatings. This product offers light color, exterior durability, and good solubility qualities. It is soluble in aliphatic and aromatic hydrocarbons, alcohols, glycol ethers, glycols, esters, ketones, and water. NACURE® 5925 is usually applied in waterborne coatings, automotive topcoats, general industrials, and can coatings. view less
NACURE® 8924 King Industries, Inc. NACURE® 8924 is an amine blocked sulfonic acid stimulant that is diluted with water for easier incorporation into water based systems. It appears as a clear, straw liquid, and has good cure response along with solubility in water-based systems. It is solu...view more NACURE® 8924 is an amine blocked sulfonic acid stimulant that is diluted with water for easier incorporation into water based systems. It appears as a clear, straw liquid, and has good cure response along with solubility in water-based systems. It is soluble in alcohols, glycols, glycol ethers, water and is insoluble in ketones, esters, aromatic and aliphatic hydrocarbons. This is a product that is normally applied in water-based coatings, wood coatings, and general industrials. view less
NACURE® CD-2120 King Industries, Inc. NACURE® CD-2120 is a proprietary hydrophobic sulfonic acid stimulant. It is effective for the hydrolysis of siloxane functional polymers at ambient conditions. It appears as a dark brown liquid and offers great compatibility with polymers. This product is...view more NACURE® CD-2120 is a proprietary hydrophobic sulfonic acid stimulant. It is effective for the hydrolysis of siloxane functional polymers at ambient conditions. It appears as a dark brown liquid and offers great compatibility with polymers. This product is soluble in ketones, esters, alcohols, glycol ethers, and aliphatic & aromatic hydrocarbons. It can be used as a stimulant for silanol condensation reactions & amino-formaldehyde crosslinkers. It can also be used as an anti-static additive and a pigment dispersant. view less
NACURE® CD-2180 King Industries, Inc. NACURE® CD-2180 is a proprietary hydrophobic sulfonic acid stimulant. It is effective for the hydrolysis of siloxane functional polymers at ambient conditions. It appears as a dark brown liquid, cures at ambient circumstances, and offers great compatibili...view more NACURE® CD-2180 is a proprietary hydrophobic sulfonic acid stimulant. It is effective for the hydrolysis of siloxane functional polymers at ambient conditions. It appears as a dark brown liquid, cures at ambient circumstances, and offers great compatibility with polyethylene polymers & copolymers. This product is soluble in ketones, esters, alcohols, glycol ethers, aliphatic & aromatic hydrocarbons, and is insoluble in water. It can be used as a stimulant for silanol condensation reactions & and moisture cure of siloxane. view less
NACURE® X49-110 King Industries, Inc. NACURE® X49-110 is an amine neutralized Dinonylnaphthalenesulfonic acid (DNNDSA) stimulant that gives a combination of package stability and cure response. This product offer good adhesion, and resistance to salt spray and humidity. It is soluble in alcoh...view more NACURE® X49-110 is an amine neutralized Dinonylnaphthalenesulfonic acid (DNNDSA) stimulant that gives a combination of package stability and cure response. This product offer good adhesion, and resistance to salt spray and humidity. It is soluble in alcohol, water, glycols, and glycol ethers. It can be applied to automotive primers, general industrials, water based can and coil coatings, electrostatic spray coatings, and electrocoat. view less
NACURE® XC-181 King Industries, Inc. NACURE® XC-181 is a latent stimulant based on an alkylaromatic sulfonic acid and appears as a clear, dark liquid. It is made for use in higher bake amino crosslinked structures such as metal decorating and coil coatings, and is also applied in automotive ...view more NACURE® XC-181 is a latent stimulant based on an alkylaromatic sulfonic acid and appears as a clear, dark liquid. It is made for use in higher bake amino crosslinked structures such as metal decorating and coil coatings, and is also applied in automotive topcoats and appliance finishes. It offers overbake resistance, “solvent pop” resistance, solubility in non-polar solvents and it is amine free. This product is soluble in aliphatic and aromatic hydrocarbons, alcohols, esters, ketones and glycol ethers. it is insoluble in water and glycols. view less
NACURE® XC-235 King Industries, Inc. NACURE® XC-235 is an acid phosphate stimulant supplied at 75% active in n-butanol. It is recommended to be used with high amino or somewhat alkylated type melamine crosslinkers. This product is soluble in alcohol, glycols, ethers, and is not soluble in wa...view more NACURE® XC-235 is an acid phosphate stimulant supplied at 75% active in n-butanol. It is recommended to be used with high amino or somewhat alkylated type melamine crosslinkers. This product is soluble in alcohol, glycols, ethers, and is not soluble in water. It offers good cure response and humidity resistance. It can be applied to topcoatings, primers, and wood coatings. view less
NACURE® XC-300 King Industries, Inc. NACURE® XC-300 is a covalently blocked stimulant that is based on an alkylaromatic sulfonic acid. It is made to offer enhanced support in amino crosslinked primers that engage basic or ion exchange type anti-corrosive pigments. This product is soluble in ...view more NACURE® XC-300 is a covalently blocked stimulant that is based on an alkylaromatic sulfonic acid. It is made to offer enhanced support in amino crosslinked primers that engage basic or ion exchange type anti-corrosive pigments. This product is soluble in aliphatic and aromatic hydrocarbons, esters, alcohol, and ketones. It is designed to be applied to appliance finish primers, general industrial thermoset primers, and coil coating primers. view less
NACURE® XC-311 King Industries, Inc. NACURE® XC-311 appears as a clear and transparent light amber liquid. It is a novel latent acid stimulant that is made to reduce the cure temperature of amino crosslinked systems. This product offers good salt spray, humidity, QUV, and overbake resistance...view more NACURE® XC-311 appears as a clear and transparent light amber liquid. It is a novel latent acid stimulant that is made to reduce the cure temperature of amino crosslinked systems. This product offers good salt spray, humidity, QUV, and overbake resistance. It is soluble in aliphatic and aromatic hydrocarbons, alcohol, glycol ethers, ketones, and water. It is designed to be applied to metal decorating, coil coatings, appliance finishes, and OEM coatings. view less
NACURE® XP-379 King Industries, Inc. NACURE® XP-379 appears as a clear, straw liquid and is an amine blocked Dodecylbenzenesulfonic acid (DDBSA) stimulant supplied in Isopropanol. It offers exterior durability, viscosity stability, and broad solubility. This product is soluble in aliphatic a...view more NACURE® XP-379 appears as a clear, straw liquid and is an amine blocked Dodecylbenzenesulfonic acid (DDBSA) stimulant supplied in Isopropanol. It offers exterior durability, viscosity stability, and broad solubility. This product is soluble in aliphatic and aromatic hydrocarbons, alcohols, glycol ethers, glycols, esters, ketones, and water. NACURE® XP-379 can be applied to general industrials, automotive topcoats, and can coatings. view less
PTSC Axcentive Sarl PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blockin...view more PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blocking agent to protect hydroxyl groups during reactions. view less
Spolapon CS Enaspol AS Spolapon CS is a cumenesulfonic acid catalyst with a pasty yellow liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in coatings ...view more Spolapon CS is a cumenesulfonic acid catalyst with a pasty yellow liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in coatings and the cross-linking of adhesives. view less
Spolapon XS Enaspol AS Spolapon XS is a xylenesulphonic acid catalyst with a light brown liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in paints or...view more Spolapon XS is a xylenesulphonic acid catalyst with a light brown liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in paints or coatings and the cross-linking of adhesives. view less
TIB KAT® HES 70 TIB Chemicals TIB KAT® HES 70 is a catalyst for esterification reactions. It is especially suitable due to its low volatility at high temperatures and high vacuum. This product is miscible in water at all concentrations and is practically odorless.
TIB KAT® MP TIB Chemicals TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA...view more TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA. view less
TIB KAT® MSA 70 TIB Chemicals TIB KAT® MSA 70 is an aqueous solution of methane sulfonic acid that is an excellent catalyst providing high efficiency in esterification reactions. This product provides high efficiency in esterification reactions. It is supplied as a colorless to pale ...view more TIB KAT® MSA 70 is an aqueous solution of methane sulfonic acid that is an excellent catalyst providing high efficiency in esterification reactions. This product provides high efficiency in esterification reactions. It is supplied as a colorless to pale yellow liquid, so it is possible to achieve products with light colors. view less
TIB KAT® MSA 99 TIB Chemicals TIB KAT® MSA 99 is a methanesulfonic acid that can be used in the chemical industry as a catalyst and additive and in the electroplating industry as a plating bath additive. It is miscible in water at all concentrations.
TIB KAT® S 70 TIB Chemicals TIB KAT® S 70 is a 70% clear, aqueous solution of sulphosuccinic acid. It shows high stability against thermal and oxidative decomposition. As a result of its high acidic strength combined with a low molecular weight, this product is an excellent catalyst...view more TIB KAT® S 70 is a 70% clear, aqueous solution of sulphosuccinic acid. It shows high stability against thermal and oxidative decomposition. As a result of its high acidic strength combined with a low molecular weight, this product is an excellent catalyst for esterification reactions. view less
TIB KAT® SP TIB Chemicals TIB KAT® SP is a formulation based on methane sulfonic acid and a phosphorous compound. It is an excellent catalyst providing high efficiency in esterification reactions. In general terms, the use of this product leads to products with significantly light...view more TIB KAT® SP is a formulation based on methane sulfonic acid and a phosphorous compound. It is an excellent catalyst providing high efficiency in esterification reactions. In general terms, the use of this product leads to products with significantly lighter colour values than using pure methane sulfonic acid, other sulfonic acids or sulfuric acid. view less