| KELSOL® 3906-B2G2-70 | Polynt Composites | KELSOL® 3906-B2G2-70 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility a...view more KELSOL® 3906-B2G2-70 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility and stability in water-thinned paints. view less | |
| KELSOL® 3969-G2-70 | Polynt Composites | KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents. Additional co-solvent beyond what is supplied in KELSOL® 3969 i...view more KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents. Additional co-solvent beyond what is supplied in KELSOL® 3969 is usually required for the best solubility and stability. view less | |
| KELSOL® 3969-G4-70 | Polynt Composites | KELSOL® 3969-G4-70 is a water-dispersible, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance. It is supplied in butoxy ethanol, a non-HAPs, high flash point solvent. Additional co-solvent beyond what is s...view more KELSOL® 3969-G4-70 is a water-dispersible, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance. It is supplied in butoxy ethanol, a non-HAPs, high flash point solvent. Additional co-solvent beyond what is supplied in KELSOL® 3969 is usually required for the best solubility and stability. view less | |
| Lithium Chromate Solution | McGean-Rohco, Inc. | Lithium Chromate Solution is a yellow liquid. It is used as a corrosion inhibitor in various coatings, adhesives, and inks. | |
| LOPON® DV | ICL Phosphate Specialty | LOPON® DV is a corrosion inhibitor for emulsion paints, premium plasters and other aqueous building paints. For binding iron ions the recommended dosage is 5.0 – 7.5 mg LOPON® DV per mg iron. It is a disodium phosphate. | Request Sample |
| LOXANOL® MI 6627 | BASF Formulation Additives | LOXANOL® MI 6627 is a white powder used as a highly effective corrosion inhibitor in combination with zinc phosphate for waterborne and solvent borne systems. It increases the anti-corrosive effect of pigments which form protective layers in the anodic zo...view more LOXANOL® MI 6627 is a white powder used as a highly effective corrosion inhibitor in combination with zinc phosphate for waterborne and solvent borne systems. It increases the anti-corrosive effect of pigments which form protective layers in the anodic zone. However, due to its extremely low water solubility LOXANOL® MI 6627 also improves the stability of anti-corrosive coatings manufactured with it. Besides its excellent dispersability, it also exhibits an outstanding stability against sedimentation. view less | |
| LT-172 | BlueSky Chemical Co., Ltd. | LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1....view more LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1.04 g/ml. view less | |
| Lubrizol® 2062H | Lubrizol Advanced Materials, Inc. | Lubrizol® 2062H is an isobutanol solution of an acid and hydroxyl functional polymer that improves the adhesion of a wide range of industrial coatings to ferrous metal and aluminum substrates. It is also an effective metal pre-treatment and can be used to...view more Lubrizol® 2062H is an isobutanol solution of an acid and hydroxyl functional polymer that improves the adhesion of a wide range of industrial coatings to ferrous metal and aluminum substrates. It is also an effective metal pre-treatment and can be used to stabilize metallic effect pigments in waterborne applications. view less | |
| M-109 | Cortec Corporation | M-109 is a multimetal solvent-based organic vapor and contact corrosion inhibitor for use in solvent and some waterborne coatings. The use level recommended is 1 to 3% by weight. | |
| M-110 | Cortec Corporation | M-110 is an organic corrosion inhibitor that can be used in solvent-based and some waterborne coatings. It is recommended to use between 1% and 3% (by weight) to improve corrosion resistance. | |
| M-118 | Cortec Corporation | M-118 is a waterborne corrosion inhibitor additive for manufacturers of coatings, adhesives, and other related materials. It contains a combination of organic and inorganic corrosion inhibitors that synergistically work together in reducing corrosion. | |
| M-119 | Cortec Corporation | M-119 is a water-based corrosion inhibitor additive for manufacturers of waterborne coatings or compounds. It provides contact and vapor phase corrosion inhibition for ferrous and non-ferrous metals. | |
| M-119LV | Cortec Corporation | M-119LV is a water-based corrosion inhibitor additive for manufacturers of waterborne coatings or compounds. It provides contact and vapor phase corrosion inhibition for ferrous and non-ferrous metals. | |
| M-168 | Cortec Corporation | M-168 is a solvent-based vapor and contact corrosion inhibitor to be used as an additive to conventional epoxies and alkyds, solvent-based and oil-based coatings and some lubricants. M-168 provides a corrosion resistant semi-solid film. M-168 is used at 2...view more M-168 is a solvent-based vapor and contact corrosion inhibitor to be used as an additive to conventional epoxies and alkyds, solvent-based and oil-based coatings and some lubricants. M-168 provides a corrosion resistant semi-solid film. M-168 is used at 2% to 20% by weight. view less | |
| M-235 | Cortec Corporation | M-235 is a proven corrosion inhibitor for copper, copper-based alloys and other yellow metals. M-235 functions by reacting with surface copper oxides to form a strong, insoluble polymeric complex. This complex creates a thin layer or film on metal surface...view more M-235 is a proven corrosion inhibitor for copper, copper-based alloys and other yellow metals. M-235 functions by reacting with surface copper oxides to form a strong, insoluble polymeric complex. This complex creates a thin layer or film on metal surfaces that provides both a mechanical and electrochemical barrier against corrosive attack. view less | |
| M-240 | Cortec Corporation | M-240 is a multimetal, flash rust, corrosion inhibitor additive for water-based paints, sealers, adhesives, fluids and more. Free of silicones and surfactants, this product may be introduced to formulations at virtually any step of production. | |
| M-241 | Cortec Corporation | M-241 is an inhibitor for protection of aluminum and it’s alloys from “in can” corrosion, waterbased coolants, process and metal working fluids, and more. This product may be introduced to formulations at virtually any step of production. | |
| M-380 | Cortec Corporation | M-380 is a water-based corrosion inhibitor that is designed to be used with carboxylated acrylic or styrene-acrylic latices. M-380 provides corrosion inhibition to ferrous and non-ferrous surfaces. | |
| M-381 | Cortec Corporation | M-381 is a new generation of corrosion inhibitors additives which utilize nanoparticle technology. M-381 is a water-based corrosion inhibitor designed for the use in waterborne coatings or compounds. | |
| M-435 | Cortec Corporation | M-435 is a multimetal organic corrosion inhibitor additive for water and solvent-based paints, sealers, adhesives, fluids and more. It is silicone and surfactant-free and can be introduced to formulations at virtually any step of production. | |
| M-5365 | Cortec Corporation | M-5365 is a liquid additive for solvent-based and a limited number of waterborne systems. M-5365 may be added in a range of 1% to 3% weight to improve corrosion and water resistance. It is recommended as an additive for maintenance coatings. | |
| M-95 | Cortec Corporation | M-95 is a very low foaming, water soluble corrosion inhibitor concentrate. It provides corrosion protection for steel, copper, brass, magnesium, aluminum, bronze, galvanized steel, and other ferrous and nonferrous metals and their alloys. M-95 prevents co...view more M-95 is a very low foaming, water soluble corrosion inhibitor concentrate. It provides corrosion protection for steel, copper, brass, magnesium, aluminum, bronze, galvanized steel, and other ferrous and nonferrous metals and their alloys. M-95 prevents corrosion in both phases: contact and vapor. view less | |
| Magnesium Chromate Powder | McGean-Rohco, Inc. | Magnesium Chromate Powder is used in chromate conversion coatings, some water treatment chemicals and as a corrosion inhibitor in sealants, rubbers, and other products. | |
| MDATP-1W | Keeneyes International Co., Ltd. | MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-...view more MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. view less | |
| MDATP-2SW | Keeneyes International Co., Ltd. | MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-...view more MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. view less | |
| Methyl Isobutyl Carbinol | Monument Chemical | Methyl Isobutyl Carbinol is a colorless, clear liquid C6 branched alcohol. It is used mainly use in the production process of lube oil additives, for antiwear inhibitors, and corrosion inhibitors. This product is also used in mining applications, and as a...view more Methyl Isobutyl Carbinol is a colorless, clear liquid C6 branched alcohol. It is used mainly use in the production process of lube oil additives, for antiwear inhibitors, and corrosion inhibitors. This product is also used in mining applications, and as an additive to surface coatings. view less | |
| Michem® Prime 4983R | Michelman | Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or prim...view more Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating, nonwoven binder and can also be used as a thermally active binder in thermal transfer release coatings. view less | |
| Mistron® 353 | Imerys Performance Additives | Mistron® 353 is a platy, high purity talc that is used in interior and exterior coating, adhesive and sealant formulations. | |
| Mistron® 403 | Imerys Performance Additives | Mistron® 403 is a high purity, platy talc that enhances film strength and flexibility in sealant formulations and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. | |
| Mistron® 554 | Imerys Performance Additives | Mistron® 554 is a platy, high purity talc that improves barrier properties, corrosion resistance and stain blocking ability in architectural and industrial primers. | |
| Mistron® Monomix | Imerys Performance Additives | Mistron® Monomix is a platy, high purity talc that improves barrier properties, corrosion resistance and stain blocking ability in architectural and industrial primers. | |
| Mistron® RCS | Imerys Performance Additives | Mistron® RCS is a high purity, platy talc used in exterior and interior coating formulations that require a high Hegman grind with low binder demand. | |
| Mistron® Ultramix | Imerys Performance Additives | Mistron® Ultramix is a platy, high purity talc used in interior and exterior coating, adhesive and sealant formulations. | |
| Mistron® Vapor R | Imerys Performance Additives | Mistron® Vapor R is a platy, high purity talc designed for use in thermoset rubber, coating, adhesive and sealant formulations. | |
| NACORR® 1151 | King Industries, Inc. | NACORR® 1151 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product ca...view more NACORR® 1151 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product can be used in air dry and thermoset coatings. It is suggested for primers and general industrial maintenance solvent-borne coatings. view less | |
| NACORR® 1351 | King Industries, Inc. | NACORR® 1351 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product c...view more NACORR® 1351 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product can be used in air dry and thermoset coatings. It is suggested for primers and general industrial maintenance solvent-borne coatings. view less | |
| NACORR® 1352 | King Industries, Inc. | NACORR® 1352 is a liquid corrosion inhibitor that is based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, good color strength, and gains synergistic ...view more NACORR® 1352 is a liquid corrosion inhibitor that is based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, good color strength, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in waterborne primers, general industrial and maintenance coatings. view less | |
| NACORR® 1389 | King Industries, Inc. | NACORR® 1389 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This produc...view more NACORR® 1389 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product can be used in air dry and thermoset coatings. It is suggested for primers and general industrial maintenance solvent-borne coatings. view less | |
| NACORR® 1389 MS | King Industries, Inc. | NACORR® 1389 MS is a liquid corrosion inhibitor based on the calcium salt of organic acids that is put in mineral spirits. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and it can easily be ...view more NACORR® 1389 MS is a liquid corrosion inhibitor based on the calcium salt of organic acids that is put in mineral spirits. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and it can easily be incorporated in most paint systems. This product can be used in solvent-based air dry and thermoset coatings. It is suggested for 2K urethane primers, general industrial and maintenance coatings. view less | |
| NACORR® 1551 | King Industries, Inc. | NACORR® 1551 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.95, good corrosion resistance, water resistance, stability, improves cure rate, ...view more NACORR® 1551 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.95, good corrosion resistance, water resistance, stability, improves cure rate, and improves color and gloss quality. This product can be used in non-aqueous air dry and thermoset coatings. It is suggested for primers, general industrial and maintenance coatings. view less | |
| NACORR® 1552 | King Industries, Inc. | NACORR® 1552 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, improves cure rate, an...view more NACORR® 1552 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, improves cure rate, and improves color and gloss quality. This product can be used in non-aqueous air dry and thermoset coatings. It is suggested for primers, general industrial and maintenance coatings. view less | |
| NACORR® 1651 | King Industries, Inc. | NACORR® 1651 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.93, good corrosion resistance, water resistance, stability, viscosity, and g...view more NACORR® 1651 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.93, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primers, general industrial and maintenance coatings. view less | |
| NACORR® 1652 | King Industries, Inc. | NACORR® 1652 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, viscosity, and gi...view more NACORR® 1652 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primers, general industrial and maintenance coatings. view less | |
| NACORR® 1754 | King Industries, Inc. | NACORR® 1754 is a liquid corrosion inhibitor that is based on an amine salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, and gains synergistic results when combined wi...view more NACORR® 1754 is a liquid corrosion inhibitor that is based on an amine salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in water based primers for appliance, coil and automotive applications. view less | |
| NACORR® 4426 | King Industries, Inc. | NACORR® 4426 is an emulsifiable corrosion inhibiting additive that gives rust and corrosion prevention in waterborne emulsion coatings. It is a proprietary preparation of a synthetic sodium dinonylnaphthalenesulfonate and polymers. It appears as a light b...view more NACORR® 4426 is an emulsifiable corrosion inhibiting additive that gives rust and corrosion prevention in waterborne emulsion coatings. It is a proprietary preparation of a synthetic sodium dinonylnaphthalenesulfonate and polymers. It appears as a light brown viscous liquid, and offers humidity resistance and stability. This product is really effective in low solids water-based systems and also emulsion based protective coatings. view less | |
| NACORR® XR-417 | King Industries, Inc. | NACORR® XR-417 is a metal complex created to enhance the corrosion resistance of direct to metal coatings. It is really useful in waterborne coatings due to its dispersability quality. It appears as a clear liquid and offers the ability to act with anti-c...view more NACORR® XR-417 is a metal complex created to enhance the corrosion resistance of direct to metal coatings. It is really useful in waterborne coatings due to its dispersability quality. It appears as a clear liquid and offers the ability to act with anti-corrosive pigments synergistically and can easily be incorporated. This product can be applied in water-based anti-corrosive coatings, solvent-based anti-corrosive coatings, and ambient cured or thermoset systems. view less | |
| NACORR® XR-422 MS | King Industries, Inc. | NACORR® XR-422 MS is a liquid corrosion inhibitor based on calcium compounds. It appears as a light, amber liquid and offers good corrosion resistance, it is easily incorporated in most paint systems, and gives synergistic results when combined with anti-...view more NACORR® XR-422 MS is a liquid corrosion inhibitor based on calcium compounds. It appears as a light, amber liquid and offers good corrosion resistance, it is easily incorporated in most paint systems, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in solvent-based air dry and thermoset coatings. It is suggested for 2K urethane primers, general industrial and maintenance coatings. view less | |
| NALZIN® FA 179 | Elementis | NALZIN® FA 179 is a recommended as a corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for application as an inhibitor against the formation of in-can corrosion. Emulsified in water...view more NALZIN® FA 179 is a recommended as a corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for application as an inhibitor against the formation of in-can corrosion. Emulsified in water, NALZIN® FA 179 can also be used as a temporary rust inhibitor. view less | Request Sample |
| NANOMYTE® PT-100 | NEI Corporation | NANOMYTE® PT-100 is a pale yellow to orange liquid and chromium-free conversion coating designed for protecting zinc plated and galvanized steel from corrosion. | |
| Nicron® 002 | Imerys Performance Additives | Nicron® 002 is a high purity, platy talc that enhances film strength and flexibility in sealant formulations and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. | |
| Nicron® 302 | Imerys Performance Additives | Nicron® 302 is a platy, high purity talc used in high solids/low VOC coating and adhesive applications which require low viscosity-build extenders. | |
| Nicron® 303 | Imerys Performance Additives | Nicron® 303 is a platy, high purity talc that enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. | |
| Nicron® 353 | Imerys Performance Additives | Nicron® 353 is a platy, high purity talc that enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. | |
| Nicron® 402 | Imerys Performance Additives | Nicron® 402 is a platy, high purity talc used in high solids/low VOC coating and adhesive applications which require low viscosity build extenders. | |
| Nicron® 403 | Imerys Performance Additives | Nicron® 403 is a platy, high purity talc that enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. | |
| Nicron® 503 | Imerys Performance Additives | Nicron® 503 is a platy, high purity talc used in high solids/low VOC coating and adhesive applications which require low viscosity build extenders. | |
| N,N-DIMETHYLETHANOLAMINE | Huntsman Performance Products | DIMETHYLETHANOLAMINE (DMEA) is a clear, colorless, mobile liquid with an ammoniacal odor. It is miscible with water, alcohols, ether, and aromatic solvents. Since it contains both a tertiary amine group and a hydroxyl group, it undergoes reactions typical...view more DIMETHYLETHANOLAMINE (DMEA) is a clear, colorless, mobile liquid with an ammoniacal odor. It is miscible with water, alcohols, ether, and aromatic solvents. Since it contains both a tertiary amine group and a hydroxyl group, it undergoes reactions typical of amines and alcohols. view less | |
| NOVINOX ACE110 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX ACE110 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX ACE110 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate ...view more NOVINOX ACE110 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX ACE110 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate for Coil Coatings. Compatible with PU and PE/Melamine systems, NOVINOX ACE110 gives excellent anticorrosive performance in Coil Coatings applied to HDGS, Galfan, Galvalume and CRS. view less | Request Sample |
| NOVINOX CAS06 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX CAS06 is a corrosion-inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with low tinting strength. NOVINOX CAS06 has been developed as a non-toxic and Eco-Friendly alternative to Strontium chromate in C...view more NOVINOX CAS06 is a corrosion-inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with low tinting strength. NOVINOX CAS06 has been developed as a non-toxic and Eco-Friendly alternative to Strontium chromate in Coil Coatings. Compatible with PU and PE/Melamine systems, NOVINOX CAS06 is our best high performance and cost effective alternative to Strontium chromate in Coil Coatings. view less | Request Sample |
| NOVINOX ePAZ | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX ePAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. This product is suitable for a wi...view more NOVINOX ePAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. This product is suitable for a wide range of solvent and water-based resins. NOVINOX ePAZ is also an excellent alternative to chromate in Coil Coatings, SC epoxy and alkyd resin systems. view less | Request Sample |
| NOVINOX PAM | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAM is a corrosion inhibiting pigment suitable for Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAM has been developed to be an alternative to Strontium chromate...view more NOVINOX PAM is a corrosion inhibiting pigment suitable for Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAM has been developed to be an alternative to Strontium chromate in Coil Coatings. It is compatible with PU and PE/Melamine systems. It gives excellent anti-corrosive performance in Coil Coatings applied to Galvalume. view less | Request Sample |
| NOVINOX PAS | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAS is a corrosion inhibiting pigment suitable for a wide range of application. It is a stable and nonhygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAS is suitable with a wide range of resins, both so...view more NOVINOX PAS is a corrosion inhibiting pigment suitable for a wide range of application. It is a stable and nonhygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAS is suitable with a wide range of resins, both solvent and water based. NOVINOX PAS is also an excellent alternative to Strontium chromate in Coil Coatings. view less | Request Sample |
| NOVINOX PAT15 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAT15 is a corrosion inhibiting pigment developed to formulate chrome free coil coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PAT15 is compatible with PU and PE/melamine systems designed for Coil...view more NOVINOX PAT15 is a corrosion inhibiting pigment developed to formulate chrome free coil coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PAT15 is compatible with PU and PE/melamine systems designed for Coil Coatings. NOVINOX PAT15 is usually used in association with NOVINOX XCA02. view less | Request Sample |
| NOVINOX PAT30 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAT30 is a corrosion inhibiting pigment that allows the formulation of paints without the label toxic for the environment. It is a stable and non-hygroscopic white powder, and it is easily dispersed. Thanks to a higher solubility than standard ...view more NOVINOX PAT30 is a corrosion inhibiting pigment that allows the formulation of paints without the label toxic for the environment. It is a stable and non-hygroscopic white powder, and it is easily dispersed. Thanks to a higher solubility than standard Zinc Phosphate, NOVINOX PAT30 will be more reactive in the initial stage of corrosion. NOVINOX PAT30 is compatible with solvent and water based resins. It shows the best performance in solvent borne Alkyd systems. view less | Request Sample |
| NOVINOX PAZ | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOV...view more NOVINOX PAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAZ is suitable with a wide range of resins, both solvent and water based. NOVINOX PAZ is also an excellent alternative to Strontium chromate in Coil Coatings. view less | Request Sample |
| NOVINOX PC01 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PC01 is a Calcium Phosphate used as an anticorrosion inhibiting pigment in DYI coatings. It is a stable and non-hygroscopic white powder, it is easily dispersed. NOVINOX PC01 may be used in formulations for Environmentally-friendly coatings. | Request Sample |
| NOVINOX PPS10 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PPS10 is a Zinc Strontium Calcium Phosphosilicate designed to offer a better protection against corrosion than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PPS10 has been specially f...view more NOVINOX PPS10 is a Zinc Strontium Calcium Phosphosilicate designed to offer a better protection against corrosion than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PPS10 has been specially formulated to take advantage of the complementary actions of each components of the pigment. It is compatible with a wide range of solvent and water based resins. view less | Request Sample |
| NOVINOX PZ02 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PZ02 is an organically modified basic Zinc Phosphate developed to be more reactive than standard Zinc Phosphate in PU and alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. The o...view more NOVINOX PZ02 is an organically modified basic Zinc Phosphate developed to be more reactive than standard Zinc Phosphate in PU and alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. The organic activator provides a higher solubility of the pigment in the initial stages of corrosion leading to a higher reactivity and protection. view less | Request Sample |
| Nubirox 102 | Ferro Pigments | Nubirox 102 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate with high performance and compatibility in solventborne and waterborne systems, suitable for glossy DTM (Direct To Metal) applications. | |
| Nubirox 106 | Ferro Pigments | Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such a...view more Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such as Coil Coatings). view less | |
| Nubirox 213 | Ferro Pigments | Nubirox 213 is a labeling-free, beige Anticorrosive pigment. It is a multiphase Iron and Zinc Phosphate with good performance specially in solventborne epoxy and alkyd sytems. | |
| Nubirox FR-10 | Ferro Pigments | Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapo...view more Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapour and liquid phase. view less | |
| Nubirox N2 | Ferro Pigments | Nubirox N2 is a conventional Zinc Phosphate. It is a white Anticorrosive pigment for application in low cost anticorrosive paints with average performance. | |
| Nubirox SP | Ferro Pigments | Nubirox SP is a unique, special particle Zinc Phosphate. It is a white Anticorrosive pigment with high specific surface, much more efficient than conventional Zinc Phosphate. | |
| ORGANOSILICASOL™ DMAC-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ DMAC-ST is colloidal silica mono-dispersed in the organic solvent N,N-Dimethyl acetamide . It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. | Request Sample |
| ORGANOSILICASOL™ EG-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ EG-ST is colloidal silica mono-dispersed in the organic solvent ethylene glycol. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. | Request Sample |
| ORGANOSILICASOL™ IPA-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many o...view more ORGANOSILICASOL™ IPA-ST is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-L | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-L is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-50 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many...view more ORGANOSILICASOL™ IPA-ST-L is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-50 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-UP | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-UP is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has ma...view more ORGANOSILICASOL™ IPA-ST-UP is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-ZL | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-ZL is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 70-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has ma...view more ORGANOSILICASOL™ IPA-ST-ZL is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 70-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MA-ST-MS | Nissan Chemical America Corporation | A colloidal silica dispersed in organic solvent. It is used to significantly improve the scratch, chip, and mar resistance of plastics, films, paints, varnishes, and inks. | Request Sample |
| ORGANOSILICASOL™ MEK-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MEK-ST is colloidal silica mono-dispersed in the organic solvent methyl ethyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and ha...view more ORGANOSILICASOL™ MEK-ST is colloidal silica mono-dispersed in the organic solvent methyl ethyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MIBK-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MIBK-ST is colloidal silica mono-dispersed in the organic solvent methyl isobutyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints an...view more ORGANOSILICASOL™ MIBK-ST is colloidal silica mono-dispersed in the organic solvent methyl isobutyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MT-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MT-ST is colloidal silica mono-dispersed in the organic solvent methanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many othe...view more ORGANOSILICASOL™ MT-ST is colloidal silica mono-dispersed in the organic solvent methanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ NPC-ST-30 | Nissan Chemical America Corporation | ORGANOSILICASOL™ NPC-ST-30 is colloidal silica mono-dispersed in the organic solvent EG mono-n-propyl ether with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints ...view more ORGANOSILICASOL™ NPC-ST-30 is colloidal silica mono-dispersed in the organic solvent EG mono-n-propyl ether with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ PMA-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ PMA-ST is colloidal silica mono-dispersed in the organic solvent propylene glycol monomethylether acetate with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics,...view more ORGANOSILICASOL™ PMA-ST is colloidal silica mono-dispersed in the organic solvent propylene glycol monomethylether acetate with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| Ottopol K-12T | Gellner Industrial, LLC | Ottopol K-12T is a cationic acrylic emulsion used as a rust converting primer. It converts the rust within minutes of the coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It does ...view more Ottopol K-12T is a cationic acrylic emulsion used as a rust converting primer. It converts the rust within minutes of the coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It does not contain tannic acid, oxime chelates, gallic acid, phosphates or phosphoric acid. This product can also be used in stain blocking primers. view less | |
| Ottopol SF 49 | Gellner Industrial, LLC | Ottopol SF 49 is a self crosslinking acrylic emulsion that has outstanding water resistance and will not blush even after prolonged exposure to water. It can be formulated into a corrosion resistant primer or semi-gloss paint. | |
| PAT BTA | P.A.T. Products | PAT BTA is a white, fine granular benzotriazole designed for use as a corrosion inhibitor in paint, ink, coating, and other applications. Stocked in the US in 55 lb resealable drums. | Request Sample |
| PAT TTA | P.A.T. Products | PAT TTA is a granular tolyltriazole designed for use as a corrosion inhibitor in paint, ink, coating, and other applications. Stocked in the US in 55 lb resealable drums. Sodium salt liquid form also available. | Request Sample |
| PEL-HIB CC220 | Ele Corporation | PEL-HIB CC220 corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel substrates. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust i...view more PEL-HIB CC220 corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel substrates. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust inhibition and aids lubrication. PEL-HIB CC220 is very water soluble. In addition to its applications in metalworking fluids and coolants, cooling water and boiler operations, oil well and refinery operations, fuels, lubricants and greases, PEL-HIB CC220 also finds its uses in inorganic coatings, organic coatings, and printing inks. view less | |
| PEL-PHOS CD260 | Ele Corporation | PEL-PHOS CD260 is a dispersant, lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, and detergent. It is both biodegradable and a non-ecotoxic surfactant. PEL-PHOS CD260 can also be used as co-emulsifier for emulsion polymerizat...view more PEL-PHOS CD260 is a dispersant, lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, and detergent. It is both biodegradable and a non-ecotoxic surfactant. PEL-PHOS CD260 can also be used as co-emulsifier for emulsion polymerization. view less | |
| PEL-PHOS CD270 | Ele Corporation | PEL-PHOS CD270 is an aqueous solution of the sodium salt of a medium HLB, aromatic, phosphate ester. PEL-PHOS CD270 is a useful pigment dispersion agent for the manufacture of paints. It is also a detergent, foamer, co...view more PEL-PHOS CD270 is an aqueous solution of the sodium salt of a medium HLB, aromatic, phosphate ester. PEL-PHOS CD270 is a useful pigment dispersion agent for the manufacture of paints. It is also a detergent, foamer, corrosion inhibitor, emulsifier for detergent concentrates & metalworking fluids, FDA, EPA compliance. view less | |
| Phosphinal PZ04 | SNCZ Société Nouvelle des Couleurs Zinciques | Phosphinal PZ04 is a Zinc Aluminium Phosphate developed to give higher and longer anticorrosion performance to the epoxy coatings than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily d...view more Phosphinal PZ04 is a Zinc Aluminium Phosphate developed to give higher and longer anticorrosion performance to the epoxy coatings than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. Phosphinal PZ04 is suitable for a wide range of solvent and water based resins. This pigment is specifically adapted to Epoxy resins. view less | Request Sample |
| PHOSPHINOX PZ06 | SNCZ Société Nouvelle des Couleurs Zinciques | PHOPHINOX PZ06 is a basic Zinc Phosphate designed to be more reactive than standard Zinc Phosphate in PU and Alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. This product is an alterna...view more PHOPHINOX PZ06 is a basic Zinc Phosphate designed to be more reactive than standard Zinc Phosphate in PU and Alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. This product is an alternative to chromates, for instance it successfully replaces chromates in wash primers. view less | Request Sample |
| ProHere® E 00001 | Michelman | ProHere® E 00001 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00001 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| ProHere® E 00002 | Michelman | ProHere® E 00002 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00002 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| ProHere® E 00003 | Michelman | ProHere® E 00003 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00003 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| ProHere® E 00004 | Michelman | ProHere® E 00004 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00004 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| ProHere® E 00005 | Michelman | ProHere® E 00005 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00005 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less |
