UL Prospector

Success!

Successfully saved your search
336 Results
#249 HI-TECH PCI Group, Inc. #249 HI-TECH is a clear blend of Alkyl-Aryl modified silicones. It is designed for high solids coating systems to improve mar resistance without the standard recoat problems. Designed for use in virtually all high solids solvent-borne systems.
ADDITOL® XL 122 Allnex ADDITOL® XL 122 is a paint additive to enhance mar resistance and slip and to improve flow and levelling in air drying and stoving paints. Request Sample
ADDITOL® XW 329 Allnex Additol® XW 329 is a paint additive to enhance mar resistance and slip and levelling, particularly of water dilutable paints. Request Sample
AEROSIL® R 7200 Evonik Operations GmbH, BL Coating Additives AEROSIL® R 7200 is a structure modified fumed silica after treated with methacrylsilane. Request Sample
AEROSIL® R 9200 Evonik Operations GmbH, BL Coating Additives AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. Request Sample
ALUMINASOL™ AS-200 Nissan Chemical America Corporation ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistan...view more ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistance, bonding strength, film forming capacity and adhesion to the products it is applied to. view less Request Sample
Aluminum Oxide (Al2O3) Panadyne Aluminum Oxide (Al2O3) is an aluminum salt sometimes known as alumina or corundum. This product is a wear-resistant material that can provide chemical resistance to acid and alkali salts at extreme temperatures. It can be used in laminates, coating, and...view more Aluminum Oxide (Al2O3) is an aluminum salt sometimes known as alumina or corundum. This product is a wear-resistant material that can provide chemical resistance to acid and alkali salts at extreme temperatures. It can be used in laminates, coating, and polishing. view less
AMA PCI Group, Inc. AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clea...view more AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clear topcoats. view less
AMAFCA PCI Group, Inc. AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip,...view more AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip, conventional and airless spray systems. view less
AQUACER® 1547 BYK AQUACER® 1547 is a wax emulsion for improving surface properties of water-borne can coatings. It is an anionic emulsion of an oxidized HD polyethylene wax. This product improves scratch resistance. Request Sample
AQUACER® 513 BYK AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...view more AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. view less Request Sample
AQUACER® 552 BYK AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems. Request Sample
AquaFLON® 178G (PTFE / Synthetic Wax Aqueous Dispersion) Shamrock Technologies, Inc. AquaFLON® 178G is PTFE (polytetrafluoroethylene) and synthetic wax and in an aqueous dispersion. AquaFLON® 178G is recommended for water-based industrial coatings.
AquaFLON® 50 (PTFE Aqueous Dispersion) Shamrock Technologies, Inc. AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 ...view more AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. view less
AquaFLON® 52 (PTFE Dispersion) Shamrock Technologies, Inc. AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for water-based specialty coatings.
AquaFLON® 605 (PTFE / Synthetic Wax Aqueous Dispersion) Shamrock Technologies, Inc. AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical synthetic wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in coatings.
AquaFLON® 797 (PTFE and Synthetic Wax Aqueous Dispersion) Shamrock Technologies, Inc. AquaFLON® 797 is PTFE (polytetrafluoroethylene) and synthetic wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for a wide variety of water based industrial coatings, wood finishes, and composite treatments.
AquaFLON® MG (PTFE / Carnauba Wax Aqueous Dispersion) Shamrock Technologies, Inc. AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion.
AquaKlean 418 Micro Powders, Inc. AquaKlean 418 is an anionic carnauba wax emulsion that provides water beading with slip, block and mar resistance. Also useful in seed coatings.
AQUAMAT® 208 BYK AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scrat...view more AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance and soft feel effect. view less Request Sample
AQUAMAT® 263 BYK AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...view more AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. view less Request Sample
AquaPolyfluo 411 Micro Powders, Inc. AquaPolyfluo 411 is a unique micronized oxidized polyethylene/PTFE wax composite for improved scuff and mar resistance in aqueous systems.
AquaPolysilk 19 Micro Powders, Inc. AquaPolysilk 19 is a unique micronized polyethylene wax composite for lubricity with abrasion and heat resistance in aqueous systems.
AquaSynfluo 176VF Micro Powders, Inc. AquaSynfluo 176VF is a micronized oxidized wax blend that provides abrasion resistance and lubricity in aqueous systems.
ASAFAMA PCI Group, Inc. ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and i...view more ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and improves mar resistance without recoating problems. view less
Boltorn™ P501 Univar Solutions Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cu...view more Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cured coatings while maintaining all the other properties of Boltorn™ P501. view less Request Sample
Boltorn™ P501 Perstorp Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cu...view more Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cured coatings while maintaining all the other properties of Boltorn™ P501. view less
Borchi® Gol LA 2 Borchers, A Company of OMG Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension r...view more Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. Borchi® Gol LA 2 is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints like hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine or epoxy systems. It also supports levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. This product is especially recommended in systems where solvent-free additives or certain solvents are required. To facilitate incorporation ability it may be helpful to dissolve Borchi® Gol LA 2 in solvents glycol-, aliphatic-, aromatic-, or ester-based. view less
BRB Siloen® SMA 284 BRB International BV BRB Siloen® SMA 284 is an 80% active dispersion of a high molecular weight silicone gum. It can be used as a silicone additive for waterborne and solvent coatings providing excellent slip, mar resistance, gloss and anti-blocking effect.
BYK®-306 BYK BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...view more BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. view less Request Sample
BYK®-333 BYK BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....view more BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. view less Request Sample
Calcined Alumina DN-206 Panadyne Calcined Alumina DN-206 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coating...view more Calcined Alumina DN-206 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coatings and as a polishing compound for plastic, metal and glass. view less
Calcined Alumina DN-420 Panadyne Calcined Alumina DN-420 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coating...view more Calcined Alumina DN-420 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coatings and as a polishing compound for plastic, metal and glass. view less
Calcined Alumina DN-430 Panadyne Calcined Alumina DN-430 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coating...view more Calcined Alumina DN-430 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coatings and as a polishing compound for plastic, metal and glass. view less
CERACOL® 79 BYK CERACOL® 79 is a wax dispersion for improving surface properties of solvent-borne can coating formulations. It is composed of a carnauba wax dispersion. This product improves surface slip and scratch resistance. Request Sample
CERAFAK® 140N BYK CERAFAK® 140N is a wax dispersion for improving surface properties of solvent-borne can coatings. It is composed of a carnauba wax dispersion. This product is suitable for use in solvent-borne can coating formulations. The additive improves surface scratc...view more CERAFAK® 140N is a wax dispersion for improving surface properties of solvent-borne can coatings. It is composed of a carnauba wax dispersion. This product is suitable for use in solvent-borne can coating formulations. The additive improves surface scratch resistance and slip. view less Request Sample
CERAFLOUR® 920 BYK CERAFLOUR® 920 is a micronized organic polymer for matting water-borne and solvent-borne paint systems. This product can be used in most paint formulations. The additive improves the following surface properties: scratch resistance, sandability, metal mar...view more CERAFLOUR® 920 is a micronized organic polymer for matting water-borne and solvent-borne paint systems. This product can be used in most paint formulations. The additive improves the following surface properties: scratch resistance, sandability, metal marking resistance and gloss reduction. view less Request Sample
CERAFLOUR® 950 For Powder BYK CERAFLOUR® 950 For Powder is a matting additive for powder coatings. It is composed of micronized modified HD polyethylene wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. Request Sample
CERAFLOUR® 965 BYK CERAFLOUR® 965 is an efficient additive to achieve homogeneous fine structures. It is composed of micronized PTFE. This product is used in all common powder coating systems to achieve fine and very reproducible surface texturing. The additive creates homo...view more CERAFLOUR® 965 is an efficient additive to achieve homogeneous fine structures. It is composed of micronized PTFE. This product is used in all common powder coating systems to achieve fine and very reproducible surface texturing. The additive creates homogeneous textures even when the film thickness varies. view less Request Sample
CERAFLOUR® 994 BYK CERAFLOUR® 994 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of ultra fine micronized amide wax. This product is used in solvent-borne systems and powder coatings. Request Sample
CERAMAT® 248 BYK CERAMAT® 248 is a flatting wax dispersion for improving surface properties of solvent-borne decorative paints. It is composed of a polyethylene wax dispersion. This product improves surface scratch resistance and gloss reduction. Request Sample
CERAMAT® 258 BYK CERAMAT® 258 is a wax dispersion for improving surface properties of solvent-borne wood and industrial coatings. It is an oxidized HD polyethylene wax dispersion. This product is suitable for use in solvent-borne furniture and parquet lacquers and industr...view more CERAMAT® 258 is a wax dispersion for improving surface properties of solvent-borne wood and industrial coatings. It is an oxidized HD polyethylene wax dispersion. This product is suitable for use in solvent-borne furniture and parquet lacquers and industrial coatings. view less Request Sample
CeraSPERSE 31 (Carnauba Wax Compound) Shamrock Technologies, Inc. CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based...view more CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings. view less
CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) Shamrock Technologies, Inc. CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA.
CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) Shamrock Technologies, Inc. CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA.
COATOSIL* 2812 COATINGS ADDITIVE Momentive COATOSIL* 2812 COATINGS ADDITIVE is a linear silicone-polyether (EO) block copolymer with -OH end group. It can help reduce coefficient of friction (COF) and enhance slip and mar resistance in waterborne, water reducible, conventional and high-solids solv...view more COATOSIL* 2812 COATINGS ADDITIVE is a linear silicone-polyether (EO) block copolymer with -OH end group. It can help reduce coefficient of friction (COF) and enhance slip and mar resistance in waterborne, water reducible, conventional and high-solids solvent systems. Applications include waterborne coatings, solventborne coatings and solventless or high-solids coatings. view less Request Sample
COATOSIL* 3500 COATINGS ADDITIVE Momentive CoatOSil* 3500 coatings additive provides an excellent balance of properties in radiation cure coatings. It reduces coefficient of friction (COF) in acrylate based coatings, without generating foam or reducing gloss. This is possible because of its compat...view more CoatOSil* 3500 coatings additive provides an excellent balance of properties in radiation cure coatings. It reduces coefficient of friction (COF) in acrylate based coatings, without generating foam or reducing gloss. This is possible because of its compatibility in formulated coatings.  view less Request Sample
COATOSIL* 3501 COATINGS ADDITIVE Momentive CoatOSil* 3501 coatings additive is Momentive's most powerful friction reducing agent, providing the maximum in coefficient of friction (COF) reduction for radiation-cured formulations in its portfolio of coatings additives. This additive also functions a...view more CoatOSil* 3501 coatings additive is Momentive's most powerful friction reducing agent, providing the maximum in coefficient of friction (COF) reduction for radiation-cured formulations in its portfolio of coatings additives. This additive also functions as an extremely efficient defoamer, especially in aqueous systems.  view less Request Sample
COATOSIL* 3509 COATINGS ADDITIVE Momentive CoatOSil* 3509 coatings additive is a reactive 100% active slip agent that may help improve abrasion and mar resistance in UV and E Beam cured acrylate resins. Additional benefits include enhanced flow and leveling, substrate wetting and gloss retention. Request Sample
CRAYVALLAC® WF-1039 Coatex an Arkema Group CRAYVALLAC® WF-1039 is a micronised PTFE modified polyethylene wax which has been especially designed to give textured finishes to polyester and hybrid powder coating systems. This texturing agent is easily incorporated using conventional premixing techn...view more CRAYVALLAC® WF-1039 is a micronised PTFE modified polyethylene wax which has been especially designed to give textured finishes to polyester and hybrid powder coating systems. This texturing agent is easily incorporated using conventional premixing techniques prior to extrusion. view less Request Sample
CRAYVALLAC® WF-3200 Coatex an Arkema Group CRAYVALLAC® WF-3200 is a micronised PTFE modified polyethylene wax. CRAYVALLAC® WF-3200 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. Request Sample
CRAYVALLAC® WN-1135 Coatex an Arkema Group CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance,...view more CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. view less Request Sample
CRAYVALLAC® WN-1495 Coatex an Arkema Group CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...view more CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. view less Request Sample
CRAYVALLAC® WN-1535 Coatex an Arkema Group CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhanc...view more CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. CRAYVALLAC® WN-1535 is suitable for use in a wide range of solvent-based, water-based, solvent free and powder coatings applications. view less Request Sample
CRAYVALLAC® WW-1001 Coatex an Arkema Group CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the ...view more CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. view less Request Sample
CRAYVALLAC® WW-1077 Coatex an Arkema Group CRAYVALLAC® WW-1077 is a 50% active dispersion of PTFE modified polyethylene wax in water. CRAYVALLAC® WW-1077 with its PTFE modification provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancin...view more CRAYVALLAC® WW-1077 is a 50% active dispersion of PTFE modified polyethylene wax in water. CRAYVALLAC® WW-1077 with its PTFE modification provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. view less Request Sample
DC Sealing Coating Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the prime...view more DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the primer. view less
Deuteron MM 823 Scratch Resistance Additive P.A.T. Products Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...view more Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. view less Request Sample
DOWSIL™ 11 Additive Dow Performance Silicones DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less
DOWSIL™ 11 Additive Univar Solutions DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less Request Sample
DOWSIL™ 14 Additive Dow Performance Silicones DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol fun...view more DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. view less
DOWSIL™ 18 Additive Dow Performance Silicones DOWSIL™ 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks.
DOWSIL™ 210S Additive Dow Performance Silicones DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enha...view more DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. view less
DOWSIL™ 211S Additive Dow Performance Silicones DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...view more DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. view less
DOWSIL™ 23 N Additive Dow Performance Silicones DOWSIL™ 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish.
DOWSIL™ 33 Additive Dow Performance Silicones DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases...view more DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. view less
DOWSIL™ 51 Additive Dow Performance Silicones DOWSIL™ 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance.
DOWSIL™ 52 Additive Dow Performance Silicones DOWSIL™ 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications.
DOWSIL™ 55 Additive Dow Performance Silicones DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, a...view more DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. view less
DOWSIL™ 56 Additive Dow Performance Silicones DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less
DOWSIL™ 56 Additive Univar Solutions DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less Request Sample
DOWSIL™ 57 Additive Dow Performance Silicones DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less
DOWSIL™ 57 Additive Univar Solutions DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less Request Sample
EBECRYL® 154 Allnex EBECRYL® 154 is a functionalized nanocomposite acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. EBECRYL® 154 is a result of an innovative process that improves the compatibility, fu...view more EBECRYL® 154 is a functionalized nanocomposite acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. EBECRYL® 154 is a result of an innovative process that improves the compatibility, functionality, and stability of functionalized nanocomposite. EBECRYL® 154 can be easily incorporated into at any stage of formulating. Films of EBECRYL® 154 exhibit outstanding hardness, chemical, scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 154 can be used as the main oligomer or modifying oligomer in formulations requiring a high degree of hardness, scratch, abrasion resistance coupled with low haze development after abrasion. view less Request Sample
EBECRYL® 3418 Allnex EBECRYL® 3418 is a modified epoxy diacrylate that exhibits excellent reactivity and low viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical ...view more EBECRYL® 3418 is a modified epoxy diacrylate that exhibits excellent reactivity and low viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance. view less Request Sample
EBECRYL® 50 Allnex EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured ...view more EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured coatings and inks. Besides its high reactivity, EBECRYL® 50 improves the hardness and solvent resistance of cured coatings and inks. This product is particularly useful in offset inks, flexo inks and overprint varnishes. view less Request Sample
EBECRYL® 8602 Allnex EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion...view more EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion resistance. In addition, EBECRYL® 8602 does not contain intentionally added organic tin compounds, heavy metals* or quinones. view less Request Sample
EBECRYL® 895 Allnex Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and E...view more Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. view less Request Sample
EDAPLAN® LA 410 Munzing Chemie EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance...view more EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance and slip of metallic effect lacquers and varnishes. It prevents surface defects like craters and orange peel. EDAPLAN® LA 410 provides defoaming and degassing. view less
EFKA® SL 3030 BASF Formulation Additives EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysil...view more EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxane, this slip & leveling agent is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. view less Request Sample
EFKA® SL 3033 BASF Formulation Additives EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and crater...view more EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and cratering. It is an organically modified polysiloxane. view less Request Sample
EFKA® SL 3035 BASF Formulation Additives EFKA® SL 3035 is an organically modified polysiloxane that can be used in water and solvent based coatings. It provides improved leveling and increases slip and mar-resistance. It prevents floating and is hydrolysis resistant. Due to its excellent compati...view more EFKA® SL 3035 is an organically modified polysiloxane that can be used in water and solvent based coatings. It provides improved leveling and increases slip and mar-resistance. It prevents floating and is hydrolysis resistant. Due to its excellent compatibility, EFKA® SL 3035 is particularly recommended for polyurethane and polyester wood coatings. It helps to prevent curtain rupture in curtain coating applications. view less Request Sample
EFKA® SL 3236 BASF Formulation Additives EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...view more EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. view less Request Sample
Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) is a coating that is used for its anti-corrosion, adhesion, and acid, alkali, salt spray, solvent and weather resistance properties. It is commonly applied on the surface of stamping parts, autom...view more Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) is a coating that is used for its anti-corrosion, adhesion, and acid, alkali, salt spray, solvent and weather resistance properties. It is commonly applied on the surface of stamping parts, automobile chassis parts, wind driven generators, bridges, steel structures, and various metals. view less
FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend.
FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. FluoroSLIP® 511 is recommended for powder coatings in water-based, solvent-based and UV systems.
FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. FluoroSLIP® 605 is a spherical synthetic wax and PTFE blend.
GENGLAZE® EC-2447 Synthomer GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally f...view more GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. view less
Grilonit® P 6835 EMS-CHEMIE AG (PRIMID) Grilonit® P 6835 is a thermoplastic modified co-polyamide additive that has improved abrasion resistance, enhanced slip coverage, and improved edge coverage. This product is used to produce nylon modified polyester and hybrid powder coatings.
HS972 Tianyi Chemical Engineering Material Co., Ltd. HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...view more HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 3.7 and 4.5. view less
HS974 Tianyi Chemical Engineering Material Co., Ltd. HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...view more HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. view less
HS976 Tianyi Chemical Engineering Material Co., Ltd. HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...view more HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. view less
Hydrocer 257 (Synthetic Wax Dispersion) Shamrock Technologies, Inc. Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems.
Hydrocer 357 (Spherical Synthetic Wax Dispersion) Shamrock Technologies, Inc. Hydrocer 357 is a spherical synthetic wax in a non-ionic aqueous dispersion recommended for water based coating systems.
Hydrocer™ 7112 (Synthetic Wax Dispersion) Shamrock Technologies, Inc. Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems.
Hydrocer 7206 (Synthetic Wax Dispersion) Shamrock Technologies, Inc. Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems.
Hydrocer EC 98 Shamrock Technologies, Inc. Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. ...view more Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. It also provides very good block mar resistance to OPVs and may reduce low temperature cracking. This emulsion can be post-added after letdown using mild agitation. view less
Hydrocer EE 95 (Synthetic Wax Emulsion) Shamrock Technologies, Inc. Hydrocer EE 95 is an anionic, high-density synthetic wax emulsion. Hydrocer EE-95 is used in both air dry and baked coatings.
Hydrocer EP 91 (Paraffin Wax Emulsion) Shamrock Technologies, Inc. Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP-91 is recommened for use in water based coating systems.
Inorganic Zinc Flake Anti-corrosive Coating (90-1) Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. Inorganic Zinc Flake Anti-Corrosive Coating (90-1) is a coating that is used for its anti-corrosion, and weather, oil, and climate resistance properties. It is commonly applied to the surface of automobiles, steel structures, and metal products.
JONCRYL® WAX 26 BASF Dispersions & Resins JONCRYL WAX 26 is a 26% solid, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. The fine particle size of this product makes it ideal for high gloss overpri...view more JONCRYL WAX 26 is a 26% solid, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. The fine particle size of this product makes it ideal for high gloss overprint varnish and gravure applications. view less Request Sample
JONCRYL® WAX 28 BASF Dispersions & Resins JONCRYL WAX 28 is a 35% solids polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings without significant loss of gloss often associated with polyethylene wax additions. Request Sample
JONCRYL® WAX 4 BASF Dispersions & Resins JONCRYL WAX 4 is a highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water-based ink formulations. Its unique composition results in very high rub and scuff resistance at low use l...view more JONCRYL WAX 4 is a highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water-based ink formulations. Its unique composition results in very high rub and scuff resistance at low use levels. For this reason, this product is extremely effective. JONCRYL WAX 4 is recommended for printing inks for flexographic or gravure applications, and interior/exterior wood coatings for flooring, furniture, or millwork applications. view less Request Sample
Lanco™ 1380 F Lubrizol Advanced Materials, Inc. Lanco™ 1380 F is a micronized wax with a high melting range and excellent toughness. In liquid coatings the use of Lanco 1380 F shows a high hardness in combination with matting efficiency and an especially good burnishing resistance. Because it contains ...view more Lanco™ 1380 F is a micronized wax with a high melting range and excellent toughness. In liquid coatings the use of Lanco 1380 F shows a high hardness in combination with matting efficiency and an especially good burnishing resistance. Because it contains no halogens, Lanco 1380 F can also be employed in areas where PTFE/PE waxes cannot be used. view less