Carboset® 3076 | Lubrizol Advanced Materials, Inc. | Carboset® 3076 is a carboxylated acrylic solution polymer based primarily on renewable resources. This thermosetting resin provides outstanding tensile properties and good solvent resistance with no formaldehyde emissions during the cure cycle. This mater...view more Carboset® 3076 is a carboxylated acrylic solution polymer based primarily on renewable resources. This thermosetting resin provides outstanding tensile properties and good solvent resistance with no formaldehyde emissions during the cure cycle. This material will provide excellent rigidity as a binder for wet laid fiberglass, constructions products, and insulation applications. view less | |
Hycar® FF 26916 | Lubrizol Advanced Materials, Inc. | Hycar® FF 26916 is a formaldehyde and APE-free acrylic emulsion polymer that provides outstanding dry and wet physical properties when used as a binder to saturate paper, glass and polyester substrates without formaldehyde emissions. It also provides good...view more Hycar® FF 26916 is a formaldehyde and APE-free acrylic emulsion polymer that provides outstanding dry and wet physical properties when used as a binder to saturate paper, glass and polyester substrates without formaldehyde emissions. It also provides good solvent resistance to saturated substrates. Hycar FF 26916 can also be used in coating applications requiring superior high solids formulation stability and excellent scrub resistance. view less | |
Hycar® 26978 | Lubrizol Advanced Materials, Inc. | Hycar® 26978 is an acrylic co-polymer. It is a general purpose soft formaldehyde free self-cross linking polymer which exhibits excellent water resistance. Hycar® 26978 is suggested for application on paper, polyester, and glass substrates where flexibili...view more Hycar® 26978 is an acrylic co-polymer. It is a general purpose soft formaldehyde free self-cross linking polymer which exhibits excellent water resistance. Hycar® 26978 is suggested for application on paper, polyester, and glass substrates where flexibility and water resistance are needed. Drying then curing at 130ºC to 150ºC for 1 minute is suggested. view less | |
Hycar® FF 26921 | Lubrizol Advanced Materials, Inc. | Hycar® FF 26921 is a formaldehyde free* acrylic emulsion polymer that provides outstanding hot-dry, hot-wet tensile properties and good solvent resistance without the formaldehyde emissions. Hycar® FF26921 has performance exceeding traditional formaldehy...view more Hycar® FF 26921 is a formaldehyde free* acrylic emulsion polymer that provides outstanding hot-dry, hot-wet tensile properties and good solvent resistance without the formaldehyde emissions. Hycar® FF26921 has performance exceeding traditional formaldehyde containing acrylic polymers used alone or with external cross-linkers. Hycar® FF 26921 emulsion is suggested for use as a saturant for glass and polyester fiber filter media and glass building mat products. view less | |
Hycar® 26975 | Lubrizol Advanced Materials, Inc. | Hycar® 26975 is firm self-crosslinking polymer that delivers the cure performance of formaldehyde containing polymers without exposure to formaldehyde. In paper saturation applications, Hycar® 26975 provides good tensile strength and water resistance. Hyc...view more Hycar® 26975 is firm self-crosslinking polymer that delivers the cure performance of formaldehyde containing polymers without exposure to formaldehyde. In paper saturation applications, Hycar® 26975 provides good tensile strength and water resistance. Hycar® 26975 can help keep your manufacturing plant compliant with worker exposure regulations and air emission limits. Suggested drying and curing conditions are 130°C-160°C for 2-3 minutes. view less | |
Hycar® 26973 | Lubrizol Advanced Materials, Inc. | Hycar® 26973 is a firm self-crosslinking polymer that delivers high stiffness both wet and dry. Hycar® 26973 has been engineered to replace or modify thermosetting systems in glass, polyester and paper applications. | |
Hycar® TN 615 | Lubrizol Advanced Materials, Inc. | Hycar® TN 615 is a soft acrylic co-polymer that exhibits high elongation, tear strength and excellent hydrophobicity. Hycar® TN 615 can be used in applications for book cover, tape and wallpaper. | |
Permax™ 805 | Lubrizol Advanced Materials, Inc. | Permax™ 805 is an APE-free, low VOC, small particle size vinylidene chloride acrylate copolymer emulsion that displays extremely low moisture vapor permeability and excellent corrosion resistance. Permax 805 exhibits longer shelf stability than traditiona...view more Permax™ 805 is an APE-free, low VOC, small particle size vinylidene chloride acrylate copolymer emulsion that displays extremely low moisture vapor permeability and excellent corrosion resistance. Permax 805 exhibits longer shelf stability than traditional vinylidene containing polymers. This polymer demonstrates excellent corrosion resistance and adhesion over a variety of metal substrates. view less | |
Hycar® 26990 | Lubrizol Advanced Materials, Inc. | Hycar® 26990 is a heat reactive carboxylated acrylic co-polymer emulsion. This general purpose product was designed to have improved coat-ability with very low residuals. Hycar® 26990 was also designed to have improved compatibility in pigmented and/or fi...view more Hycar® 26990 is a heat reactive carboxylated acrylic co-polymer emulsion. This general purpose product was designed to have improved coat-ability with very low residuals. Hycar® 26990 was also designed to have improved compatibility in pigmented and/or filled systems. view less | |
Carboset® CA-600 | Lubrizol Advanced Materials, Inc. | Carboset® CA-600 is a water-based, 100% acrylic, self cross-linking, polymer emulsion specifically developed for horizontal masonry clear, stain and opaque coatings. High performance coatings can be formulated at <100 g/L VOC to protect and enhance the ap...view more Carboset® CA-600 is a water-based, 100% acrylic, self cross-linking, polymer emulsion specifically developed for horizontal masonry clear, stain and opaque coatings. High performance coatings can be formulated at <100 g/L VOC to protect and enhance the appearance of a variety of concrete based construction materials for residential and commercial applications. view less | |
Hycar® 26996 | Lubrizol Advanced Materials, Inc. | Hycar® 26996 is a general purpose self-crosslinking anionic acrylic polymer with a good balance of tensile strength, elongation, and solvent resistance. It also has excellent heat sealability performance. Product applications include paper saturation, pap...view more Hycar® 26996 is a general purpose self-crosslinking anionic acrylic polymer with a good balance of tensile strength, elongation, and solvent resistance. It also has excellent heat sealability performance. Product applications include paper saturation, paper coating, and textile coatings. Hycar® 26996 has broad clearances under many FDA food contact regulations. view less | |
Hycar® NH-3069 | Lubrizol Advanced Materials, Inc. | Hycar® NH-3069 is a self-crosslinking non-halogen polymer designed for flame retardant applications. Hycar NH-3069 imparts flame retardancy to roll goods without the use of additives or halogenated materials. Hycar NH-3069 can be used with paper, cotton, ...view more Hycar® NH-3069 is a self-crosslinking non-halogen polymer designed for flame retardant applications. Hycar NH-3069 imparts flame retardancy to roll goods without the use of additives or halogenated materials. Hycar NH-3069 can be used with paper, cotton, rayon and glass media to impart mechanical performance as well as flame resistance. It is TSCA and REACH compliant. view less | |
Lubrizol® 2062H | Lubrizol Advanced Materials, Inc. | Lubrizol® 2062H is an isobutanol solution of an acid and hydroxyl functional polymer that improves the adhesion of a wide range of industrial coatings to ferrous metal and aluminum substrates. It is also an effective metal pre-treatment and can be used to...view more Lubrizol® 2062H is an isobutanol solution of an acid and hydroxyl functional polymer that improves the adhesion of a wide range of industrial coatings to ferrous metal and aluminum substrates. It is also an effective metal pre-treatment and can be used to stabilize metallic effect pigments in waterborne applications. view less | |
Carboset® PL 3127 | Lubrizol Advanced Materials, Inc. | Carboset® PL 3127 is an acrylic co-polymer emulsion designed for use in peelable coatings for metal where both short and long-term corrosion protection is needed. Carboset® PL 3127 is APEO surfactant free and can be formulated to less than 45 grams/liter ...view more Carboset® PL 3127 is an acrylic co-polymer emulsion designed for use in peelable coatings for metal where both short and long-term corrosion protection is needed. Carboset® PL 3127 is APEO surfactant free and can be formulated to less than 45 grams/liter VOC US (EPA Method 24). It can also be formulated for various application methods such as spray, brush, or dip and is color and tint capable for visual indicators in plant operations. view less | |
Permax™ 232 | Lubrizol Advanced Materials, Inc. | Permax™ 232 is used in high performance coating applications where a hydrophilic polymer is needed for moisture vapor transmission, hydrophilic surface treatment, or excellent ionic compatibility is required. Permax™ formulas can be engineered to give con...view more Permax™ 232 is used in high performance coating applications where a hydrophilic polymer is needed for moisture vapor transmission, hydrophilic surface treatment, or excellent ionic compatibility is required. Permax™ formulas can be engineered to give controlled moisture vapor transmission rates, excellent washfastness and softness. Permax™ 232 is TSCA, EINECS, and DSL compliant. Permax™ 232 can be crosslinked with isocyanates, polyfunctional aziridines, melamine formaldehyde and carbodiimide cross linkers. view less | |
Hycar® 2679 | Lubrizol Advanced Materials, Inc. | Hycar® 2679 emulsion is a heat-reactive acrylic latex polymer. It provides outstanding wash and dry cleaning resistance and is not easily soiled. It achieves discoloration resistance to light and heat aging -- the later being outstanding even in its own c...view more Hycar® 2679 emulsion is a heat-reactive acrylic latex polymer. It provides outstanding wash and dry cleaning resistance and is not easily soiled. It achieves discoloration resistance to light and heat aging -- the later being outstanding even in its own class of acrylic latexes. But most important is that these outstanding properties are achieved with a minimum heat requirement. This, combined with the latex’s ease of compounding because of its good colloidal stability, can affect significant cost savings. Its colloidal properties also make it high sizing and low foaming – important processing characteristics. view less | |
Sancure™ 20025F | Lubrizol Advanced Materials, Inc. | Sancure™ 20025F is a soft elastic aliphatic polyester urethane polymer dispersion. It has very low VOC content and contains no alkylphenol ethoxylates (APEO). It is designed to be used in textile and nonwoven coating formulations for polyester and nylon f...view more Sancure™ 20025F is a soft elastic aliphatic polyester urethane polymer dispersion. It has very low VOC content and contains no alkylphenol ethoxylates (APEO). It is designed to be used in textile and nonwoven coating formulations for polyester and nylon fabrics. It can be used as a component in tie coats and laminating adhesives. Sancure 20025F can be crosslinked using melamine formaldehyde resins, isocyanate crosslinkers, polyfunctional aziridines, or carbodiimides. view less |