RHOPLEX EI-2000 | Univar Solutions | RHOPLEX EI-2000 is a versatile 100% acrylic polymer designed for use as a binder for exterior insulation and finish systems (EIFS) and as a cement modifier. Because it is cement-compatible, it offers excellent performance in EIFS cementitious basecoats an...view more RHOPLEX EI-2000 is a versatile 100% acrylic polymer designed for use as a binder for exterior insulation and finish systems (EIFS) and as a cement modifier. Because it is cement-compatible, it offers excellent performance in EIFS cementitious basecoats and adhesives. view less | Request Sample |
RHOPLEX EI-5000 | Univar Solutions | RHOPLEX EI-5000 is a polymer emulsion is designed for use as a binder for trowel-applied non-cementitious, water-resistive barriers (WRBs) and adhesives. It is an excellent choice for use in exterior insulation and finish systems (EIFS) with drainage syst...view more RHOPLEX EI-5000 is a polymer emulsion is designed for use as a binder for trowel-applied non-cementitious, water-resistive barriers (WRBs) and adhesives. It is an excellent choice for use in exterior insulation and finish systems (EIFS) with drainage systems. view less | Request Sample |
RHOPLEX 1785 | Univar Solutions | RHOPLEX 1785 is a high performance 55% solids acrylic latex binder designed for sealant compounds, provides excellent joint movement capability, adhesion and durability, with superior wet and dry adhesion properties. Sealant formulations cling tenaciously...view more RHOPLEX 1785 is a high performance 55% solids acrylic latex binder designed for sealant compounds, provides excellent joint movement capability, adhesion and durability, with superior wet and dry adhesion properties. Sealant formulations cling tenaciously to a wide variety of construction substrates including glass, steel, and concrete. In addition to excellent adhesion, the product provides excellent durability. This polymer is characterized by good water resistance and the unsurpassed ultraviolet stability associated with acrylic chemistry. In addition, a unique proprietary design gives the binder exceptional Aymar durability. Formulations based on this product can tolerate 25% joint movement without cracking or rupturing. view less | Request Sample |
RHOPLEX™ MULTILOBE 400 | Univar Solutions | RHOPLEX™ MULTILOBE 400 is an APEO (alkyl phenol ethoxylate) surfactant free binder for low-VOC exterior flat and satin paints, providing excellent durability, color retention, and dirt pick-up resistance. It enhances film-build performance and reduces thi...view more RHOPLEX™ MULTILOBE 400 is an APEO (alkyl phenol ethoxylate) surfactant free binder for low-VOC exterior flat and satin paints, providing excellent durability, color retention, and dirt pick-up resistance. It enhances film-build performance and reduces thickener demand. Also, polymer composition has been modified to a slightly lower Tg relative to MULTILOBE™ 200 in order to optimize the balance of properties with lower co-solvent levels. view less | Request Sample |
RHOPLEX GL-720 | Univar Solutions | RHOPLEX GL-720 is an all-acrylic firm polymer emulsion specifically designed for bonding wet laid glass mat that can be used in roofing products such as built-up roofing (BUR) and asphalt shingles. It is especially useful in high-speed operations because ...view more RHOPLEX GL-720 is an all-acrylic firm polymer emulsion specifically designed for bonding wet laid glass mat that can be used in roofing products such as built-up roofing (BUR) and asphalt shingles. It is especially useful in high-speed operations because it is fast drying and delivers maximum tensile strength. This stiff binder is also suggested for use as an additive to improve performance in other industrial nonwoven applications such as filtration media. view less | Request Sample |
NEOPRENE NPR 2008 | Univar Solutions | NEOPRENE NPR 2008 is a high viscosity Neoprene polymer designed specifically to provide improved solution characteristics when compared to Neoprene WHV which is intended primarily for rubber goods. Raw polymer stabilility is excellent. . | Request Sample |
RHOPLEX 2019RX | Univar Solutions | RHOPLEX 2019RX is a styrene acrylic polymer emulsion for use in flexible coatings. When properly formulated and applied, new RHOPLEX 2019RX polymer gives the formulator access to a general purpose maintenance coating for metal and asphalt roofing surfaces...view more RHOPLEX 2019RX is a styrene acrylic polymer emulsion for use in flexible coatings. When properly formulated and applied, new RHOPLEX 2019RX polymer gives the formulator access to a general purpose maintenance coating for metal and asphalt roofing surfaces suitable for moderate climates. New RHOPLEX 2019RX offers the following improved features over Rohm and Haas RHOPLEX 1019, and other styrene acrylic polymers. view less | Request Sample |
AQUACER 8075 | Univar Solutions | AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio o...view more AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8075 is compatible with all known polymer dispersions and plasticizers. view less | Request Sample |
NEOPRENE WB | Univar Solutions | NEOPRENE WB is a non-staining polychloroprene that contains a high percentage of gel polymer. | Request Sample |
STAR-POL 136 | Univar Solutions | STARPOL 136 is a modified waxy corn based starch polymer that is an easily dispersible, highly substituted, nonionic water soluble polymer designed to be used at lower solids levels in wall treatments, adhesives, tile mortar, tile grout, oil drilling mud ...view more STARPOL 136 is a modified waxy corn based starch polymer that is an easily dispersible, highly substituted, nonionic water soluble polymer designed to be used at lower solids levels in wall treatments, adhesives, tile mortar, tile grout, oil drilling mud as well as a number of other applications. . view less | Request Sample |
RHOPLEX AS-48 | Univar Solutions | RHOPLEX AS-48 is an acrylic-styrene polymer supplied in water at 56% solids by weight. Using this product in a cementitious mortar offers enhanced flexibility. Cured mortars modified with this polymer also have excellent water resistance and adhesion prop...view more RHOPLEX AS-48 is an acrylic-styrene polymer supplied in water at 56% solids by weight. Using this product in a cementitious mortar offers enhanced flexibility. Cured mortars modified with this polymer also have excellent water resistance and adhesion properties. view less | Request Sample |
AQUACER 8976 | Univar Solutions | AQUACER 8976 improves buffability, increases filling capacity and produces a strong anti-slip effect. The above mentioned properties are generated by mixing AQUACER 8976 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 i...view more AQUACER 8976 improves buffability, increases filling capacity and produces a strong anti-slip effect. The above mentioned properties are generated by mixing AQUACER 8976 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8976 is compatible with all known polymer dispersions and plasticizers. view less | Request Sample |
PLASTOLYN 240 | Univar Solutions | PLASTOLYN 240 is a versatile, aromatic, water white, high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchlor...view more PLASTOLYN 240 is a versatile, aromatic, water white, high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchloride (PVC), acrylonitrile-butadiene-styrene (ABS) and block copolymers. view less | Request Sample |
VORANOL 222-056 | Univar Solutions | VORANOL 222-056 is a fast reacting 2000 molecular weight high primary hydroxyl polyether diol with a hydroxyl number of 56 used across a wide range of applications including pre-polymer & PUD manufacturing, adhesives, sealants, coatings, castings, foams a...view more VORANOL 222-056 is a fast reacting 2000 molecular weight high primary hydroxyl polyether diol with a hydroxyl number of 56 used across a wide range of applications including pre-polymer & PUD manufacturing, adhesives, sealants, coatings, castings, foams and binders. view less | Request Sample |
PLASTOLYN 290 | Univar Solutions | PLASTOLYN 290 is a versatile, aromatic, water white, very high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinyl...view more PLASTOLYN 290 is a versatile, aromatic, water white, very high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchloride (PVC), acrylonitrile-butadiene-styrene (ABS) and block copolymers. view less | Request Sample |
RHOPLEX™ EC-2848 | Univar Solutions | RHOPLEX™ EC-2848 is a 100% acrylic polymer emulsion for use in elastomeric wall coatings providing outstanding balance of elongation, tensile strength, and dirt pick-up resistance over a wide temperature range. The elongation and recovery properties of th...view more RHOPLEX™ EC-2848 is a 100% acrylic polymer emulsion for use in elastomeric wall coatings providing outstanding balance of elongation, tensile strength, and dirt pick-up resistance over a wide temperature range. The elongation and recovery properties of the polymer allow coatings to bridge dimensionally unstable cracks without rupturing. view less | Request Sample |
NEOPRENE WHV | Univar Solutions | NEOPRENE WHV is a sulfur modified crystallization resistant Neoprene polymer stabilized with a thiuram disulfide. It is designed for non-staining and general-purpose use. | Request Sample |
NEOPRENE WHV-100 | Univar Solutions | NEOPRENE WHV-100 is a sulfur modified crystallization resistant Neoprene polymer stabilized with a thiuram disulfide. It is designed for non-staining and general-purpose use. | Request Sample |
Cariflex™ IR0307 KU Polymer | Univar Solutions | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...view more Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. view less | Request Sample |
Cariflex™ IR0310 KU Polymer | Univar Solutions | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...view more Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. view less | Request Sample |
RHOPLEX E-330 | Univar Solutions | RHOPLEX E-330 is an acrylic polymer designed for modifying Portland cement compositions. Cement mortars mixed with this product are hard, tough and durable. | Request Sample |
STAR-POL 469 | Univar Solutions | STARPOL 469 is a new, functional, easily dispersible, highly substituted, nonionic water soluble polymer designed to be used at lower solids levels in wall treatments, adhesives and other applications. | Request Sample |
STAR-POL 600 | Univar Solutions | STARPOL 600 is a new, functional, easily dispersible, highly substituted, nonionic water soluble polymer designed to be used at lower solids levels in wall treatments, adhesives and other applications. | Request Sample |
GP BKUA-2370 | Univar Solutions | GP BKUA-2370 is Resin dispersion is in a solvent of water and butyl Cellosolve® (ethylene glycol monobutyl ether). It is an effective crosslinker for adhesion of latex and phenoxy polymers and is formulated to improve chemical resistance. | Request Sample |
GP 7571 | Univar Solutions | GP 7571 is a heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxylcontaining polymers such as epoxies, polyesters, vinyls and acrylics. It is designed to maximize chemical resistance. | Request Sample |
KRATON™ MD1653 M | Univar Solutions | KRATON™ MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is used as a modifier of polymers, as an ingredient in formulating adhesives, sealants and coatings. | Request Sample |
KRATON® FG1901 GT Polymer | Univar Solutions | KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...view more KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1901 GT Polymer is used in adhesives, coatings, and sealants. view less | Request Sample |
KRATON® FG1924 GT Polymer | Univar Solutions | KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...view more KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1924 GT Polymer is used in adhesives, coatings, and sealants. view less | Request Sample |
VORANOL 2000LM | Univar Solutions | VORANOL 2000LM is a low-monol polyol that has a true diol functionality. Offers superior dynamic as well as mechanical properties to applications. VORANOL™ 2000LM is used in the manufacture of pre-polymers for adhesives and sealants. | Request Sample |
PLASTOLYN R1140 | Univar Solutions | PLASTOLYN R1140 is an amorphous, low-molecular-weight hydrocarbon resin derived from aromatic petrochemical feedstocks. The resin is fully hydrogenated to a saturated cyclo-aliphatic structure that is highly compatible with polyolefin polymers. | Request Sample |
RHOPLEX EC-2540 | Univar Solutions | RHOPLEX EC-2540 is an all-acrylic polymer designed for use in a white protective coating to extend the life of existing roofs. Coatings based on this product are an excellent choice for use over asphaltic substrates. | Request Sample |
RHOPLEX LA-501 | Univar Solutions | RHOPLEX LA-501 is a high-solids, 100% acrylic latex polymer developed to offer excellent bulk water resistance and optimal vapor permeability when formulated into a water-resistive and/or air barrier coating. | Request Sample |
KRISTALEX 1120 | Univar Solutions | KRISTALEX 1120 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
KRISTALEX 3070 | Univar Solutions | KRISTALEX 3070 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
KRISTALEX 3085 | Univar Solutions | KRISTALEX 3085 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
KRISTALEX 3100 | Univar Solutions | KRISTALEX 3100 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
KRISTALEX 3115LV | Univar Solutions | KRISTALEX 3115LV is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
RHOPLEX EC-2885 | Univar Solutions | RHOPLEX EC-2885 is developed as a high performing, high tensile strength polymer that, when formulated into a quality, recommended Elastomeric Roof Coating formulation, delivers improved toughness and hail resistance while maintaining the excellent elasto...view more RHOPLEX EC-2885 is developed as a high performing, high tensile strength polymer that, when formulated into a quality, recommended Elastomeric Roof Coating formulation, delivers improved toughness and hail resistance while maintaining the excellent elastomeric properties. view less | Request Sample |
RHOPLEX™ AC-261 LF | Univar Solutions | RHOPLEX™ AC-261 LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints. | Request Sample |
KRATON® D1193 PT Polymer | Univar Solutions | KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...view more KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1193 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1113 PT Polymer | Univar Solutions | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...view more KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1114 PT Polymer | Univar Solutions | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1117 PT Polymer | Univar Solutions | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1119 PT Polymer | Univar Solutions | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1124 PT Polymer | Univar Solutions | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...view more KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1126 PT Polymer | Univar Solutions | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...view more KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1161 KT Polymer | Univar Solutions | KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low ...view more KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1161 PT Polymer | Univar Solutions | KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...view more KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1162 PT Polymer | Univar Solutions | KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1162 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1163 PT Polymer | Univar Solutions | KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...view more KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1164 PT Polymer | Univar Solutions | KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1164 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1165 PT Polymer | Univar Solutions | KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...view more KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1165 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1111 KT Polymer | Univar Solutions | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...view more KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1111 KU Polymer | Univar Solutions | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...view more KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
GP 7565 LF | Univar Solutions | GP 7565 LF is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to ma...view more GP 7565 LF is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to maximize chemical resistance. view less | Request Sample |
KRATON® D1161 KU Polymer | Univar Solutions | KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and ...view more KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1171 PT Polymer | Univar Solutions | KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness,...view more KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. view less | Request Sample |
KRATON® D1118 ET Polymer | Univar Solutions | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...view more KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1118 ETM Polymer | Univar Solutions | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...view more KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1184 AT Polymer | Univar Solutions | KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D4150 KU Polymer | Univar Solutions | KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, a...view more KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1101 AT Polymer | Univar Solutions | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...view more KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | Request Sample |
RHOPLEX™ PR-33 | Univar Solutions | RHOPLEX™ PR-33 is an aqueous, all-acrylic binder designed for exterior and interior primers and stain blocking sealers, which uses ambient crosslinking technology to offer improved performance versus conventional latex polymers. It achieves excellent film...view more RHOPLEX™ PR-33 is an aqueous, all-acrylic binder designed for exterior and interior primers and stain blocking sealers, which uses ambient crosslinking technology to offer improved performance versus conventional latex polymers. It achieves excellent film formation blocking stains from migrating through the dry paint film and yields stain blocking performance at high PVC. Enhanced adhesion and excellent durability are additional attributes of this technology. view less | Request Sample |
XIAMETER® OFS-6518 Silane | Univar Solutions | XIAMETER® OFS-6518 Silane is a vinyltrialkyoxysilane coupling and crosslinking agent. It provides coupling between inorganic surfaces and organic rubbers and plastic. This product also provides moisture crosslinking sites when grafted into polyethylene polymer...view more XIAMETER® OFS-6518 Silane is a vinyltrialkyoxysilane coupling and crosslinking agent. It provides coupling between inorganic surfaces and organic rubbers and plastic. This product also provides moisture crosslinking sites when grafted into polyethylene polymer backbone. view less | Request Sample |
XIAMETER® OFS-6300 Silane | Univar Solutions | XIAMETER® OFS-6300 Silane is a vinyltrialkyoxysilane coupling and crosslinking agent. It provides coupling between inorganic surfaces and organic rubbers and plastic. This product also provides moisture crosslinking sites when grafted into polyethylene polymer...view more XIAMETER® OFS-6300 Silane is a vinyltrialkyoxysilane coupling and crosslinking agent. It provides coupling between inorganic surfaces and organic rubbers and plastic. This product also provides moisture crosslinking sites when grafted into polyethylene polymer backbone. view less | Request Sample |
KRATON® D1191 ET Polymer | Univar Solutions | KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. view less | Request Sample |
KRATON® D1184 AIM Polymer | Univar Solutions | KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range...view more KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1192 ET Polymer | Univar Solutions | KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardn...view more KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1192 ETM Polymer | Univar Solutions | KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, an...view more KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1101 AS Polymer | Univar Solutions | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...view more KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | Request Sample |
KRATON® D1101 AU Polymer | Univar Solutions | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...view more KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | Request Sample |
KRATON™ G1701 M | Univar Solutions | KRATON™ G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear ap...view more KRATON™ G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings. view less | Request Sample |
KRATON® D1155 ES Polymer | Univar Solutions | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
KRATON® D1157 ES Polymer | Univar Solutions | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |
RHOPLEX AC-630 | Univar Solutions | RHOPLEX AC-630 is an all-acrylic polymer designed for tough, water-resistant sealers. These coatings are commonly factory-applied to retard efflorescence of cured cementitious products formed in plants under controlled conditions. Typical applications inc...view more RHOPLEX AC-630 is an all-acrylic polymer designed for tough, water-resistant sealers. These coatings are commonly factory-applied to retard efflorescence of cured cementitious products formed in plants under controlled conditions. Typical applications include roofing tiles and other precast construction products. view less | Request Sample |
RHOPLEX MC-1834P | Univar Solutions | RHOPLEX MC-1834P is a low-odor acrylic polymer emulsion designed for modifying Portland cement compositions. It also can be used as a latex bonding agent to enhance adhesion of new concrete to existing concrete. It is especially useful for applications wi...view more RHOPLEX MC-1834P is a low-odor acrylic polymer emulsion designed for modifying Portland cement compositions. It also can be used as a latex bonding agent to enhance adhesion of new concrete to existing concrete. It is especially useful for applications with thin sections, excessive vibration and heavy traffic. view less | Request Sample |
KRATON™ MD6684 GS-N | Univar Solutions | KRATON™ MD6684 GS-N is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass and 1% maleic anhydride. It is used as a modifier of polymers and as an ingredient in formulating compounds for foot...view more KRATON™ MD6684 GS-N is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass and 1% maleic anhydride. It is used as a modifier of polymers and as an ingredient in formulating compounds for footwear, adhesives, sealants and coatings. view less | Request Sample |
RHOPLEX MC-76 | Univar Solutions | RHOPLEX MC-76 is It cement modifier can be used in both sprayable and patching mortar applications. This acrylic polymer is designed for sprayable cementitious compositions – like exterior insulation and finish systems (EIFS) basecoats and adhesives and s...view more RHOPLEX MC-76 is It cement modifier can be used in both sprayable and patching mortar applications. This acrylic polymer is designed for sprayable cementitious compositions – like exterior insulation and finish systems (EIFS) basecoats and adhesives and sprayable stucco-type coatings – and can be applied over a variety of surfaces. view less | Request Sample |
RHOPLEX™ WL-81 | Univar Solutions | RHOPLEX™ WL-81 is a thermoplastic, waterborne, acrylic polymer is specifically designed for clear and pigmented ambient or forced-air-dry industrial lacquers. It is suitable for use on a variety of substrates and offering benefits currently provided by so...view more RHOPLEX™ WL-81 is a thermoplastic, waterborne, acrylic polymer is specifically designed for clear and pigmented ambient or forced-air-dry industrial lacquers. It is suitable for use on a variety of substrates and offering benefits currently provided by solventborne industrial lacquers, but without the flammability, odor, or other problems inherent with such systems. view less | Request Sample |
RHOPLEX™ WL-96 | Univar Solutions | RHOPLEX™ WL-96 is a waterborne acrylic polymer used for low-VOC, brush-applied, interior clear wood finishes. It is well suited for finishing wood trim, doors, walls and floors. Formulation blends with polyurethane dispersions enhance hardness, stain and ...view more RHOPLEX™ WL-96 is a waterborne acrylic polymer used for low-VOC, brush-applied, interior clear wood finishes. It is well suited for finishing wood trim, doors, walls and floors. Formulation blends with polyurethane dispersions enhance hardness, stain and chemical resistance, and other performance characteristics. view less | Request Sample |
TACOLYN 1070 | Univar Solutions | TACOLYN 1070 is an aqueous, 55% solids, solvent-free, anionic hydrocarbon dispersion. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction adhesive applications by enhancing adhesion to polyolefin substrates an...view more TACOLYN 1070 is an aqueous, 55% solids, solvent-free, anionic hydrocarbon dispersion. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction adhesive applications by enhancing adhesion to polyolefin substrates and recycled corrugated board. It promotes cohesive strength and offers good moisture resistance when used in pressure sensitive adhesives. view less | Request Sample |
RHOPLEX™ 2500 | Univar Solutions | RHOPLEX™ 2500 is an all-Acrylic Emulsion Polymer that is designed for tough, water-resistant masonry paints and primers. It possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), the ...view more RHOPLEX™ 2500 is an all-Acrylic Emulsion Polymer that is designed for tough, water-resistant masonry paints and primers. It possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), the ability to retard efflorescence in cured cementitious products and high pigment-binding capacity. view less | Request Sample |
TACOLYN 3100 | Univar Solutions | TACOLYN 3100 is an aqueous, 55% solids, solvent-free, highly hydrogenated rosin ester dispersion prepared from the pentaerythritol ester of hydrogenated rosin. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and constructi...view more TACOLYN 3100 is an aqueous, 55% solids, solvent-free, highly hydrogenated rosin ester dispersion prepared from the pentaerythritol ester of hydrogenated rosin. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications including clear film label applications, along with high temperature performance in waterborne PSAs. view less | Request Sample |
GP LB-7575 | Univar Solutions | GP LB-7575 is an etherified bisphenol-A resin with free formaldehyde and free bisphenol-A contents of less than 0.1%. It is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epox...view more GP LB-7575 is an etherified bisphenol-A resin with free formaldehyde and free bisphenol-A contents of less than 0.1%. It is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to maximize chemical resistance. . view less | Request Sample |
TACOLYN 5003 | Univar Solutions | TACOLYN 5003 is an aqueous, 45% solids, solvent-free, anionic hydrocarbon resin dispersion recommended as a single tackifier for anionic polychloroprene latex polymers used in contact adhesive applications. When used as a modifier for contact adhesives, T...view more TACOLYN 5003 is an aqueous, 45% solids, solvent-free, anionic hydrocarbon resin dispersion recommended as a single tackifier for anionic polychloroprene latex polymers used in contact adhesive applications. When used as a modifier for contact adhesives, Tacolyn™ 5003 imparts outstanding high temperature performance, excellent contactability and good moisture resistance without the use of a second reinforcing tackifier. view less | Request Sample |
TACOLYN 5085 | Univar Solutions | TACOLYN 5085 is an aqueous, 55% solids, solvent-free anionic hydrocarbon dispersion prepared from a low molecular weight, aliphatic C5 hydrocarbon resin, recommended as a tackifier for isoprene rubber and natural rubber latex polymers used in tape applica...view more TACOLYN 5085 is an aqueous, 55% solids, solvent-free anionic hydrocarbon dispersion prepared from a low molecular weight, aliphatic C5 hydrocarbon resin, recommended as a tackifier for isoprene rubber and natural rubber latex polymers used in tape applications. Tacolyn™ 5085 is a good reinforcing agent that maintains excellent peel control when used in pressure sensitive tapes. view less | Request Sample |
ISONATE 143-L | Univar Solutions | ISONATE 143-L is a polycarbodiimide-modified diphenylmethane diisocyanate. Liquid at room temperature, this product has a low viscosity and good storage stability down to 75°F. The polycarbodiimide adduct offers extra flexibility because adduct formation is reversible (dissociation generates an additional isocyanate function). The carbodiimide linkage aids the stabilization of the polymer...view more ISONATE 143-L is a polycarbodiimide-modified diphenylmethane diisocyanate. Liquid at room temperature, this product has a low viscosity and good storage stability down to 75°F. The polycarbodiimide adduct offers extra flexibility because adduct formation is reversible (dissociation generates an additional isocyanate function). The carbodiimide linkage aids the stabilization of the polymer against hydrolytic degradation. view less | Request Sample |
ISONATE 125MDR | Univar Solutions | ISONATE 125MDR is a crystalline, pure MDI mixture of approximately 98% 4,4`-diphenylmethane diisocyanate and 2% 2,4`-diphenylmethane diisocyanateis characterized by high purity, low acidity and reproducible reactivity. This difunctional product is a key ingredient in preparing prepolymers for polyurethane processing. Judicious use of polyols, extenders and additives permits the manufacture of thermoplastic polymer...view more ISONATE 125MDR is a crystalline, pure MDI mixture of approximately 98% 4,4`-diphenylmethane diisocyanate and 2% 2,4`-diphenylmethane diisocyanateis characterized by high purity, low acidity and reproducible reactivity. This difunctional product is a key ingredient in preparing prepolymers for polyurethane processing. Judicious use of polyols, extenders and additives permits the manufacture of thermoplastic polymers suitable for extrusion, injection molding or solution applications. view less | Request Sample |
ISONATE 181 | Univar Solutions | ISONATE 181 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with sufficient glycol to allow easy handling down to 80°F (27°C). This medium-viscosity, supercooled liquid provides more rapid compatibility between isocyanates and polyols, which increases the effectiveness of catalysts present and usually results in a more easily controlled polymer...view more ISONATE 181 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with sufficient glycol to allow easy handling down to 80°F (27°C). This medium-viscosity, supercooled liquid provides more rapid compatibility between isocyanates and polyols, which increases the effectiveness of catalysts present and usually results in a more easily controlled polymer reaction. view less | Request Sample |
MAINCOTE™ 4950 | Univar Solutions | MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosi...view more MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosion resistance, and ease of formulation with excellent paint stability. It also offers good architectural gloss and trim paint properties. view less | Request Sample |
ISONATE 125M | Univar Solutions | ISONATE 125M is a crystalline, pure MDI mixture composed of approximately 98% 4,4’-diphenylmethane diisocyanate and 2 percent 2,4’-diphenylmethane diisocyanate. Characterized by high purity, low acidity and reproducible reactivity, this difunctional product is a key ingredient in preparing prepolymers for polyurethane processing. Judicious use of polyols, extenders and additives permits the manufacture of thermoplastic polymer...view more ISONATE 125M is a crystalline, pure MDI mixture composed of approximately 98% 4,4’-diphenylmethane diisocyanate and 2 percent 2,4’-diphenylmethane diisocyanate. Characterized by high purity, low acidity and reproducible reactivity, this difunctional product is a key ingredient in preparing prepolymers for polyurethane processing. Judicious use of polyols, extenders and additives permits the manufacture of thermoplastic polymers suitable for extrusion, injection molding or solution applications. view less | Request Sample |
RHOPLEX B-924 | Univar Solutions | RHOPLEX B-924 is a all-acrylic, metal-crosslinked, floor polish polymer that is specifically designed for areas where a combination of exceptional durability, good lay down gloss and formulation cost economy are required. It is an excellent choice for use...view more RHOPLEX B-924 is a all-acrylic, metal-crosslinked, floor polish polymer that is specifically designed for areas where a combination of exceptional durability, good lay down gloss and formulation cost economy are required. It is an excellent choice for use in health care facilities where exceptional durability is needed, and those high-traffic facilities which receive low frequency maintenance, such as schools and office buildings. view less | Request Sample |
RHOPLEX™ WL-91 | Univar Solutions | RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoidin...view more RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoiding surface preparation and raw materials associated with many solvent-borne systems. Furthermore, it exhibits superiority in chemical resistance, oil resistance, and film toughness. view less | Request Sample |
LIPACRYL MB-3640 | Univar Solutions | LIPACRYL MB-3640 is an all-acrylic polymer designed for use in pigmented protective coatings to extend the life of new and existing roofs. It is ideal for use over asphaltic substrates, and applications with greater resistance to continuous ponded water o...view more LIPACRYL MB-3640 is an all-acrylic polymer designed for use in pigmented protective coatings to extend the life of new and existing roofs. It is ideal for use over asphaltic substrates, and applications with greater resistance to continuous ponded water on asphaltic roofs. These coatings represent a water-based alternative to solvent-based aluminized asphalt roof coating. For optimal water resistance, the product must be formulated with hydrophobic dispersants. view less | Request Sample |
RHOPLEX™ HG-44P | Univar Solutions | RHOPLEX™ HG-44P is an acrylic co-polymer emulsion developed specifically as a paint vehicle for both interior and light duty exterior high gloss and semigloss enamels. This aqueous latex allows the formulator to make enamel-like paints with the outstandin...view more RHOPLEX™ HG-44P is an acrylic co-polymer emulsion developed specifically as a paint vehicle for both interior and light duty exterior high gloss and semigloss enamels. This aqueous latex allows the formulator to make enamel-like paints with the outstanding block resistance, stain removal, and washability needed for indoor use. It has good metal adhesion, resistance to household chemicals and can be formulated for light maintenance applications. view less | Request Sample |
EMULSION E-2353 | Univar Solutions | EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. It can be blended with a softer polymer...view more EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. It can be blended with a softer polymer, such as RHOPLEX™ AC-261, to improve on flexibility and toughness. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long-term warranty applications. view less | Request Sample |
TACOLYN 5002 | Univar Solutions | TACOLYN 5002 is an aqueous, 55% solids, solvent-free, anionic hydrocarbon resin dispersion, recommended as a tackifier for natural rubber and styrene butadiene rubber latex polymers used in label, tape, construction, and contact adhesive applications. As ...view more TACOLYN 5002 is an aqueous, 55% solids, solvent-free, anionic hydrocarbon resin dispersion, recommended as a tackifier for natural rubber and styrene butadiene rubber latex polymers used in label, tape, construction, and contact adhesive applications. As a modifier for pressure sensitive label and tape adhesives, Tacolyn™ 5002 provides a good balance of peel and shear and enhances specific adhesion to polyolefin substrates and recycled corrugated board. Tacolyn™ 5002 is recommended for water-based contact adhesives where fast break properties are required as in foam to foam bonding applications. view less | Request Sample |
XIAMETER® OFS-6020 Silane | Univar Solutions | XIAMETER® OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces. It has been found to be an effective coupling agent for clay reinforced elas...view more XIAMETER® OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces. It has been found to be an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber. The silane-treated clay provides improvement in both physical and dynamic properties compared to similar cured elastomers containing untreated clay. May also be used as an additive to improve the performance of these types of thermoset resins when they are used as mineral binders in foundry and abrasive composite applications. view less | Request Sample |
LUDOX® CL | Univar Solutions | LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that imparts a positive charge. LUDOX® CL Colloidal Silica may be used in various coating applications in which the formulation requires acidic pH or cationic polymers or surfactants. The positively charged particles may be used as surface treatments to paper and fibrous materials. LUDOX® CL Colloidal Silica can also be used as a high temperature binder...view more LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that imparts a positive charge. LUDOX® CL Colloidal Silica may be used in various coating applications in which the formulation requires acidic pH or cationic polymers or surfactants. The positively charged particles may be used as surface treatments to paper and fibrous materials. LUDOX® CL Colloidal Silica can also be used as a high temperature binder. view less | Request Sample |
KRATON® D4150 KT Polymer | Univar Solutions | KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...view more KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | Request Sample |