CELLOSIZE™ QP 100MH | Univar Solutions | CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thi...view more CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thicken household cleaning products, in the fabrication of toilet tank drop-in tablets, and other applications where very high thickening efficiency is the dominant performance requirement. view less | Request Sample |
CELLOSIZE™ QP 15000H | Univar Solutions | CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ Q...view more CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 15000H HEC are 4 to 6 pounds per 100 gallons, and in personal care/household cleaners, the levels of CELLOSIZE™ QP 15000H HEC are typically between 0.5% and 1%. view less | Request Sample |
CELLOSIZE™ QP 300 | Univar Solutions | CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical us...view more CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical use level of CELLOSIZE QP 300 HEC in latex synthesis is 2% by weight (based on total monomers) in vinyl and vinyl-acrylic latex formulations (usually less in all-acrylic formulations). view less | Request Sample |
CELLOSIZE™ QP 30000H | Univar Solutions | CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE...view more CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 30000H HEC are 4 to 6 pounds per 100 gallons, and in personal care and household cleaners, the levels of CELLOSIZE™ QP 30000H HEC are typically between 0.5% and 1%. view less | Request Sample |
CELLOSIZE™ QP 4400H | Univar Solutions | CELLOSIZE™ QP 4400H is a medium molecular weight cellulosic polymer useful for general thickening applications, and is used primarily as a latex paint thickener. Its excellent rheological properties give paints good flow and leveling characteristics. | Request Sample |
CELLOSIZE™ QP 52000H | Univar Solutions | CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-join...view more CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-joint compounds. view less | Request Sample |
CELLOSIZE™ QP-100MH-V | Univar Solutions | CELLOSIZE™ QP-100MH-V is a very high molecular weight hydroxyethyl cellulose. The product is surface treated to avoid gel or lump formation when dissolved in aqueous systems. | Request Sample |
CERAMER™ 1608 | Univar Solutions | CERAMER™ 1608 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or ...view more CERAMER™ 1608 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or higher acid numbers than oxidized products, they are much harder with higher melting points. view less | Request Sample |
CERAMER™ 67 | Univar Solutions | CERAMER™ 67 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or hi...view more CERAMER™ 67 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or higher acid numbers than oxidized products, they are much harder with higher melting points. view less | Request Sample |
Charmor™ DP15 | Univar Solutions | Charmor™ DP15 is a white super-micronized (particle size < 15 μm) dipentaerythritol derivative in powder form. Charmor™ DP15 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP15 is used as c...view more Charmor™ DP15 is a white super-micronized (particle size < 15 μm) dipentaerythritol derivative in powder form. Charmor™ DP15 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP15 is used as carbon source for halogen free systems demanding lower smoke release rate and non-toxic fumes. view less | Request Sample |
Charmor™ DP40 | Univar Solutions | Charmor™ DP40 is a white micronized (particle size < 40 μm) dipentaerythritol derivative in powder form. Charmor™ DP40 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP40 is used as carbon ...view more Charmor™ DP40 is a white micronized (particle size < 40 μm) dipentaerythritol derivative in powder form. Charmor™ DP40 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | Request Sample |
Charmor™ PM15 | Univar Solutions | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...view more Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | Request Sample |
Charmor™ PM40 | Univar Solutions | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. view less | Request Sample |
Charmor™ Pro DP40 C40 | Univar Solutions | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...view more Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. view less | Request Sample |
Charmor™ PT40 | Univar Solutions | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. view less | Request Sample |
CHEMREZ 30 | Univar Solutions | CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and...view more CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin solution to dry pigment. CHEMREZ 30 has been used with a wide range of organic pigments as well as carbon black. CHEMREZ 30 as a letdown vehicle can be used upwards of 50% of the formulation. view less | Request Sample |
d-Limonene | Univar Solutions | d-Limonene is a hydrocarbon used as a solvent. It is commonly used in cosmetic products, and is also suitable for coatings, adhesives, inks, cleaners, and lubricants. | Request Sample |
DDSA | Univar Solutions | DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fu...view more DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fuels and lubricating oils. view less | Request Sample |
Decoupage MNP | Univar Solutions | Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage co...view more Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage coating. Decoupage MNP can also be used in other nonylphenol applications where color stability is of prime importance. view less | Request Sample |
D.E.H.™ 20 | Univar Solutions | D.E.H.™ 20 is an economical diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It is used for civil engineering applications, maintenance paints, and in ...view more D.E.H.™ 20 is an economical diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. view less | Request Sample |
D.E.H.™ 24 | Univar Solutions | D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling poi...view more D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling point, and is used for maintenance paints, the manufacture of epoxyamine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. view less | Request Sample |
D.E.H.™ 29 | Univar Solutions | D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other appl...view more D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other applications where color is not a limitation. In adhesives, it yields much higher peel strength than DETA or TETA at comparable gel times and lower cost. view less | Request Sample |
D.E.H.™ 39 | Univar Solutions | D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil...view more D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, it is used for casting, potting and encapsulation. It is often used for epoxy composite materials. view less | Request Sample |
D.E.H.™ 4909 | Univar Solutions | D.E.H.™ 4909 is a modified polyamine fast curing in thin films, excellent wetting properties on concrete surface, excellent adhesion on concrete. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for low temperature applications...view more D.E.H.™ 4909 is a modified polyamine fast curing in thin films, excellent wetting properties on concrete surface, excellent adhesion on concrete. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for low temperature applications, and concrete primers. Manufactured without benzyl alcohol and nonylphenol. view less | Request Sample |
D.E.H.™ 52 | Univar Solutions | D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and m...view more D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and mixing rates with liquid epoxy resins, however it is much less hygroscopic than standard polyamines. Applications include maintenance paints, in two-pack adhesives, civil engineering, castings and hand lay-up laminates and particularly suitable for colorless systems. view less | Request Sample |
D.E.H.™ 530E32 | Univar Solutions | D.E.H.™ 530E32 is a cycloaliphatic amine cure agent for epoxy resin systems with low color, blush-free, especially designed for ambient and low temperature cure applications. | Request Sample |
D.E.H.™ 545 | Univar Solutions | D.E.H.™ 545 is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R™ 353 ...view more D.E.H.™ 545 is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R™ 353 and D.E.R 324 are recommended epoxy resins for use with D.E.H 545 as a starting formulation of primer systems. view less | Request Sample |
D.E.H.™ 546 | Univar Solutions | D.E.H.™ 546 is a low viscosity modified cycloaliphatic amine intended for ambient curing of liquid epoxy resins, providing good corrosion protection. Applications include industrial flooring, primers and sealers. | Request Sample |
D.E.H.™ 554 | Univar Solutions | D.E.H.™ 554 is a modified cycloaliphatic amine used as a curing for epoxy resins and specially designed for applications requiring self leveling. It offers a good low temperature cure and low viscosity, potential high gloss, good color stability, low visc...view more D.E.H.™ 554 is a modified cycloaliphatic amine used as a curing for epoxy resins and specially designed for applications requiring self leveling. It offers a good low temperature cure and low viscosity, potential high gloss, good color stability, low viscosity. Typical applications include self leveling flooring, concrete sealers and high solid coatings. view less | Request Sample |
D.E.H.™ 561 | Univar Solutions | D.E.H.™ 561 is a low viscosity, formulated, modified cycloaliphatic amine with low color and fast cure at low temperatures, is specially designed for use in high solids coatings, self leveling and screed floors. | Request Sample |
D.E.H.™ 570 | Univar Solutions | D.E.H.™ 570 is a low viscosity modified cycloaliphatic amine hardener. DEH 570 imparts high strength and excellent chemical resistance. | Request Sample |
D.E.H.™ 58 | Univar Solutions | D.E.H.™ 58 is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.™ 58 Curing Agent is particularly suitable for colorless coatin...view more D.E.H.™ 58 is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.™ 58 Curing Agent is particularly suitable for colorless coatings or adhesive systems. view less | Request Sample |
D.E.H.™ 582 | Univar Solutions | D.E.H.™ 582 is a cycloaliphatic amine hardener used as a curing agent for epoxy resins resulting in a non-blushing product with good water spot resistance and excellent chemical resistance. | Request Sample |
D.E.H.™ 590 | Univar Solutions | D.E.H.™ 590 is a curing agent specifically designed for high chemical resistance. | Request Sample |
D.E.H.™ 598B | Univar Solutions | D.E.H.™ 598B is a modified aliphatic amine hardener used as a curing agent for epoxy resins for rapid-set and low temperatures cure systems with high gloss and high strength. | Request Sample |
D.E.H.™ 615 | Univar Solutions | D.E.H.™ 615 is a solvent free Mannich base curing agent suitable curing above 0°C. | Request Sample |
D.E.H.™ 622 | Univar Solutions | D.E.H.™ 622 is a modified amine curing agent suitable to be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins. | Request Sample |
D.E.H.™ 653 | Univar Solutions | D.E.H.™ 653 is a modified amine curing agent for epoxy resins. | Request Sample |
D.E.H.™ 81 | Univar Solutions | D.E.H.™ 81 is a phenolic curing agent of intermediate reactivity containing curing catalyst as well as a polyacrylate flow modifier. The intermediate reactivity makes D.E.H.™ 81 particularly suitable as a starting base for product development. | Request Sample |
D.E.H.™ 82 | Univar Solutions | D.E.H.™ 82 is a high reactivity phenolic curing agent containing curing catalyst as well as a polyacrylate flow modifier. Can be formulated in low temperature applications in combination with D.E.R.™ 6615 solid epoxy resin. | Request Sample |
D.E.H.™ 84 | Univar Solutions | D.E.H.™ 84 is a curing agent based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A containing about 2% of a curing accelerator. | Request Sample |
D.E.H.™ 85 | Univar Solutions | D.E.H.™ 85 is a phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A. | Request Sample |
D.E.H.™ 87 | Univar Solutions | D.E.H.™ 87 is a higher molecular weight curing agent based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A. Designed primarily for functional powder coating applications requiring a high degree of flexibility and a good stora...view more D.E.H.™ 87 is a higher molecular weight curing agent based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A. Designed primarily for functional powder coating applications requiring a high degree of flexibility and a good storage stability. view less | Request Sample |
D.E.H.™ 90 | Univar Solutions | D.E.H.™ 90 is a solid reaction product of liquid epoxy resin and polyphenols containing polyacrylate flow modifier and 2% curing accelerator. Designed for powder coating applications that require fast cure capability and low curing temperature, combined w...view more D.E.H.™ 90 is a solid reaction product of liquid epoxy resin and polyphenols containing polyacrylate flow modifier and 2% curing accelerator. Designed for powder coating applications that require fast cure capability and low curing temperature, combined with superior adhesion property to metal substrates. Fully compatible with other D.E.H.™ 80 series epoxy curing agents. view less | Request Sample |
D.E.N.™ 425 | Univar Solutions | D.E.N.™ 425 is an approximately 2.5 functional liquid epoxy novolac resin bridging between standard liquid epoxy resin and semi-solid epoxy novolac resins. Offers excellent mechanical properties and solvent resistance properties when used in combination w...view more D.E.N.™ 425 is an approximately 2.5 functional liquid epoxy novolac resin bridging between standard liquid epoxy resin and semi-solid epoxy novolac resins. Offers excellent mechanical properties and solvent resistance properties when used in combination with a fast curing agent. D.E.N.™ 425 requires no post-cure. view less | Request Sample |
D.E.N.™ 426 | Univar Solutions | D.E.N.™ 426 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac. | Request Sample |
D.E.N.™ 431 | Univar Solutions | D.E.N.™ 431 is a multi-functional (±2.8) epoxy novolac resin of lower molecular weight. Offers elevated temperature service and excellent chemical resistance. It can be used where solvents cannot be tolerated and application viscosity (temperature) needs ...view more D.E.N.™ 431 is a multi-functional (±2.8) epoxy novolac resin of lower molecular weight. Offers elevated temperature service and excellent chemical resistance. It can be used where solvents cannot be tolerated and application viscosity (temperature) needs to remain relatively low. D.E.N.™ 431 is used in adhesives, electrical and structural laminates and casting applications. view less | Request Sample |
D.E.N.™ 438 | Univar Solutions | D.E.N.™ 438 by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438 is recognized as a standard for high-temperatur...view more D.E.N.™ 438 by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438 is recognized as a standard for high-temperature applications. view less | Request Sample |
D.E.N.™ 438 EK85 | Univar Solutions | D.E.N.™ 438-EK85 by Olin is a highly functional (±3.6) epoxy novolac resin in methyl-ethyl ketone solution. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438-EK85 is ma...view more D.E.N.™ 438-EK85 by Olin is a highly functional (±3.6) epoxy novolac resin in methyl-ethyl ketone solution. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438-EK85 is mainly used for laminating or prepreg applications. view less | Request Sample |
D.E.N.™ 438-A85 | Univar Solutions | D.E.N.™ 438-A85 by Olin is a highly functional (±3.6) epoxy novolac resin in acetone solution. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438-A85 is mainly used for ...view more D.E.N.™ 438-A85 by Olin is a highly functional (±3.6) epoxy novolac resin in acetone solution. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438-A85 is mainly used for laminating or prepreg applications. view less | Request Sample |
D.E.N.™ 438L | Univar Solutions | D.E.N.™ 438L by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and low viscosity. D.E.N.™ 438L is recognized as a standard for high-temperature a...view more D.E.N.™ 438L by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and low viscosity. D.E.N.™ 438L is recognized as a standard for high-temperature applications and higher solid formulations. view less | Request Sample |
D.E.N.™ 439 | Univar Solutions | D.E.N.™ 439 by Olin is a highly functional (±3.8) epoxy novolac resin. Offers improved reactivity, high viscosity, good drape and limited tack. D.E.N.™ 439 is used prepreg formulations. | Request Sample |
D.E.N.™ 439 EK85 | Univar Solutions | D.E.N.™ 439 EK85 is a highly functional (±3.8) epoxy novolac resin in methyl-ethyl ketone solution. Offers improved reactivity, high viscosity, good drape and limited tack. D.E.N.™ 439-EK85 is mainly for laminating or prepreg applications. | Request Sample |
D.E.N.™ 439H | Univar Solutions | D.E.N.™ 439-H by Olin is a highly functional epoxy novolac resin. Offers lower processing variability. | Request Sample |
D.E.R.™ 317 | Univar Solutions | D.E.R.™ 317 is a high viscosity, fast reacting (20% faster than D.E.R.™ 331™) liquid epoxy resin designed for adhesive applications requiring quick gelling with amine curing agents. | Request Sample |
D.E.R.™ 324 | Univar Solutions | D.E.R.™ 324 offers low viscosity and low surface tension to wet the surface better, giving better adhesion and slightly lower viscosity at any given filler loading. The diluent increases pot life, flexibility (impact resistance) and acid resistance, but l...view more D.E.R.™ 324 offers low viscosity and low surface tension to wet the surface better, giving better adhesion and slightly lower viscosity at any given filler loading. The diluent increases pot life, flexibility (impact resistance) and acid resistance, but limits the solvent resistance. Prone to crystallization. view less | Request Sample |
D.E.R.™ 325 | Univar Solutions | D.E.R.™ 325 is a low viscosity liquid epoxy resin with reduced surface tension. Offers excellent wetting and flow. The low diluent content results in the improved mechanical properties over D.E.R.™ 323 and D.E.R.™ 324 epoxy resin. | Request Sample |
D.E.R.™ 327 | Univar Solutions | D.E.R.™ 327 is a mono-functional reactive diluent modified liquid epoxy resin that has excellent resistance to crystallization. | Request Sample |
D.E.R.™ 330 | Univar Solutions | D.E.R.™ 330 is a lower viscosity bisphenol A epoxy resin allowing the use of fewer diluents or more fillers in the formulation. Offers longer pot life versus the standard resin and slightly improved resistance properties when used in heat curing (composit...view more D.E.R.™ 330 is a lower viscosity bisphenol A epoxy resin allowing the use of fewer diluents or more fillers in the formulation. Offers longer pot life versus the standard resin and slightly improved resistance properties when used in heat curing (composite) applications. view less | Request Sample |
D.E.R.™ 331 | Univar Solutions | D.E.R.™ 331 is an industry standard bisphenol A-based liquid epoxy resin. Offers excellent mechanical, thermal and chemical resistance properties in multiple applications. Shows improved reactivity versus competitive alternatives. | Request Sample |
D.E.R.™ 332 | Univar Solutions | D.E.R.™ 332 is a high purity diglycidyl ether of bisphenol A. Its high purity and low oligomer content assure uniform performance, exceptionally low viscosity and improved elevated temperature properties over standard epoxy resins. This resin grade is mai...view more D.E.R.™ 332 is a high purity diglycidyl ether of bisphenol A. Its high purity and low oligomer content assure uniform performance, exceptionally low viscosity and improved elevated temperature properties over standard epoxy resins. This resin grade is mainly used in electrical encapsulation applications. view less | Request Sample |
D.E.R.™ 337 | Univar Solutions | D.E.R.™ 337 is a semi-solid reaction product of epichlorohydrin and bisphenol A. | Request Sample |
D.E.R.™ 337-X90 | Univar Solutions | D.E.R.™ 337-X90 is a solution of D.E.R.™ 337 in xylene. Higher solids content than D.E.R.™ 337-X80 epoxy resin solution. | Request Sample |
D.E.R.™ 353 | Univar Solutions | D.E.R.™ 353 is a low viscosity bisphenol A / bisphenol F epoxy resin blend with very low crystallization tendency. Offers low surface tension to wet the surface better, giving better adhesion. The diluent increases pot life, flexibility (impact resistance...view more D.E.R.™ 353 is a low viscosity bisphenol A / bisphenol F epoxy resin blend with very low crystallization tendency. Offers low surface tension to wet the surface better, giving better adhesion. The diluent increases pot life, flexibility (impact resistance) and acid resistance. view less | Request Sample |
D.E.R.™ 354 | Univar Solutions | D.E.R.™ 354 is an unmodified bisphenol F-based epoxy resin of low viscosity. Improves crystallization resistance of other epoxy resins and gives improvement in solvent resistance. Frequently used in solvent-free coatings, floor coverings, adhesives or com...view more D.E.R.™ 354 is an unmodified bisphenol F-based epoxy resin of low viscosity. Improves crystallization resistance of other epoxy resins and gives improvement in solvent resistance. Frequently used in solvent-free coatings, floor coverings, adhesives or composite applications. view less | Request Sample |
D.E.R.™ 362 | Univar Solutions | D.E.R.™ 362 is a chemically modified liquid epoxy resin without diluent with minimal crystallization tendency. Offers excellent flow and high gloss coatings/floorings. This resin is used in building applications above and below ground, on road and bridge ...view more D.E.R.™ 362 is a chemically modified liquid epoxy resin without diluent with minimal crystallization tendency. Offers excellent flow and high gloss coatings/floorings. This resin is used in building applications above and below ground, on road and bridge construction, as well as in underwater applications. view less | Request Sample |
D.E.R.™ 383 | Univar Solutions | D.E.R.™ 383 is a lower viscosity bisphenol A epoxy resin allowing the use of fewer diluents or more fillers in the formulation. Offers longer pot life versus the standard resin and slightly improved resistance properties when used in heat curing (composit...view more D.E.R.™ 383 is a lower viscosity bisphenol A epoxy resin allowing the use of fewer diluents or more fillers in the formulation. Offers longer pot life versus the standard resin and slightly improved resistance properties when used in heat curing (composite) applications. view less | Request Sample |
D.E.R.™ 538-A80 | Univar Solutions | D.E.R.™ 538-A80 is a brominated epoxy resin in acetone with about 20% bromine on solids. Offers less flow during lamination versus D.E.R.™ 530-A80 epoxy resin. | Request Sample |
D.E.R.™ 642-U | Univar Solutions | D.E.R.™ 642-U is a novolac modified solid resin for functional powder coatings. In combination with other resins it provides excellent corrosion and chemical resistance along with good mechanical properties. | Request Sample |
D.E.R.™ 660-B80 | Univar Solutions | D.E.R.™ 660-B80 is an intermediate epoxy equivalent weight epoxy resin dissolved in butanol, and is used mainly in adhesives and protective coatings, or as a modifier for other epoxy resins to improve impact strength, extensibility, and adhesion. | Request Sample |
D.E.R.™ 660-PA80 | Univar Solutions | D.E.R.™ 660-PA80 is a solution of D.E.R.™ 660 epoxy resin in propyl acetate. The solvent choice makes it possible to formulate coatings without solvents listed as hazardous air pollutants. | Request Sample |
D.E.R.™ 661 | Univar Solutions | D.E.R.™ 661 is an unmodified standard “1-type” solid epoxy resin. Excellent base for many high quality chemical-resistant coatings withstanding exposure to corrosive atmospheres. | Request Sample |
D.E.R.™ 662 | Univar Solutions | D.E.R.™ 662 is a standard “2-type” epoxy resin with good flow. | Request Sample |
D.E.R.™ 662-UH | Univar Solutions | D.E.R.™ 662-UH is a low molecular weight “2.5-type” epoxy resin for decorative powder coatings requiring excellent gloss and flow. | Request Sample |
D.E.R.™ 664 | Univar Solutions | D.E.R.™ 664 is a medium molecular weight “4-type” epoxy resin containing an esterification catalyst. Esters prepared by reacting this resin with fatty acids have very consistent viscosities and acid values. | Request Sample |
D.E.R.™ 664U | Univar Solutions | D.E.R.™ 664U is a medium molecular weight “4-type” epoxy resin to provide improved gloss and smoothness. | Request Sample |
D.E.R.™ 664U-E | Univar Solutions | D.E.R.™ 664U-E is a medium molecular weight “4-type” epoxy resin for functional coatings to provide improved flexibility. | Request Sample |
D.E.R.™ 667-E | Univar Solutions | D.E.R.™ 667-E is a high molecular weight “7-type” solid epoxy resin with improved solution stability. Suitable for metal decoration, interior and exterior can coatings, tube and drum linings, coil primers and many other industrial applications. | Request Sample |
D.E.R.™ 671-MAK75 | Univar Solutions | D.E.R.™ 671-MAK75 is a solution of D.E.R.™ 671 in methyl n-amyl ketone for industrial protective coatings. | Request Sample |
D.E.R.™ 671-X75 | Univar Solutions | D.E.R.™ 671-X75 is a solution of D.E.R.™ 671 in xylene. Industry standard for heavy-duty anti-corrosive coatings. | Request Sample |
D.E.R.™ 672-U | Univar Solutions | D.E.R.™ 672-U is a novolac modified, higher molecular weight solid epoxy resin for more flexible, corrosion resistant epoxy powder coating. Extra edge-coverage can be obtained by the addition of 10-50% of this resin grade to the pipe or internal drum lini...view more D.E.R.™ 672-U is a novolac modified, higher molecular weight solid epoxy resin for more flexible, corrosion resistant epoxy powder coating. Extra edge-coverage can be obtained by the addition of 10-50% of this resin grade to the pipe or internal drum lining formulation. view less | Request Sample |
D.E.R.™ 684-EK40 | Univar Solutions | D.E.R.™ 684-EK40 is a solution of an ultra-high molecular weight epoxy resin. It has essentially no epoxy functionality and provides coatings with outstanding physical and chemical resistance properties by solvent evaporation alone. Main applications incl...view more D.E.R.™ 684-EK40 is a solution of an ultra-high molecular weight epoxy resin. It has essentially no epoxy functionality and provides coatings with outstanding physical and chemical resistance properties by solvent evaporation alone. Main applications include maintenance and flash primers, shop coats, wire enamels, road markers and clear coatings for brass, chrome and aluminum. view less | Request Sample |
D.E.R.™ 732 | Univar Solutions | D.E.R.™ 732 is a longer chain length polyglycol diepoxide liquid resin. Applications include coatings and adhesives for improved flexibility, elongation and impact resistance. | Request Sample |
D.E.R.™ 736 | Univar Solutions | D.E.R.™ 736 is a shorter chain polyglycol diepoxide liquid resin for improved flexibility, elongation and impact resistance in coatings and adhesives. | Request Sample |
DIAX™ 2270 | Univar Solutions | DIAX™ 2770 is a hyperbranched hydrocarbon polymer that is a liquid at room temperature used in imaging and coatings applications. When used in solvent based coating and ink formulations, DIAX 2770 polymer promotes surface quality by reducing defects assoc...view more DIAX™ 2770 is a hyperbranched hydrocarbon polymer that is a liquid at room temperature used in imaging and coatings applications. When used in solvent based coating and ink formulations, DIAX 2770 polymer promotes surface quality by reducing defects associated with foaming. Product is intended for use in polyester, PVDC, and epoxy based systems. The purpose of the product is to reduce surface defects of coatings and inks while being soluble in common coating and ink solvents and being easily incorporated in coating and inks systems. view less | Request Sample |
Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | Univar Solutions | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | Request Sample |
Diethylene triamine | Univar Solutions | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...view more Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). view less | Request Sample |
Diisopropanolamine | Univar Solutions | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | Request Sample |
DMAMP-80 | Univar Solutions | DMAMP-80 is one of the strongest tertiary amino alcohols commercially available, which can be used in water based systems to provide exceptional clarity, wettability and stability. | Request Sample |
Dow Corning® 1250 Surfactant | Univar Solutions | Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthe...view more Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthetic leathers. view less | Request Sample |
Dow Corning® 26 Additive | Univar Solutions | Dow Corning® 26 Additive is a leveling and wetting agent for solvent-based coatings and inks. It is a low-viscosity, 100% silicone fluid containing no solvents. | Request Sample |
Dow Corning® 550 Fluid | Univar Solutions | Dow Corning® 550 Fluid is a trimethyl-terminated dimethyl, phenylmethyl siloxane fluid. It offers excellent heat transfer characteristics, good compressibility, and good oxidation and thermal stability. | Request Sample |
Dow Corning® Q2-7735 Adhesive | Univar Solutions | Dow Corning® Q2-7735 Adhesive is a polydimethylsiloxane gum and resin dispersion. It is a high-viscosity fluid which offers high tack combined with good adhesion. | Request Sample |
DOWSIL™ 100F Additive | Univar Solutions | DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and...view more DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. view less | Request Sample |
DOWSIL™ 11 Additive | Univar Solutions | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | Request Sample |
DOWSIL™ 163 Additive | Univar Solutions | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | Request Sample |
DOWSIL™ 205SL Additive | Univar Solutions | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | Request Sample |
DOWSIL™ 29 Additive | Univar Solutions | DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin ...view more DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. view less | Request Sample |
DOWSIL™ 3 Additive | Univar Solutions | DOWSIL™ 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | Request Sample |
DOWSIL™ 3074 Intermediate | Univar Solutions | DOWSIL™ 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC h...view more DOWSIL™ 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC high temperature coatings. view less | Request Sample |