| Benzoin | Estron Chemical, Inc. | Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the ...view more Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the coating film. view less | |
| Butaflow BT-71 | Estron Chemical, Inc. | Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorp...view more Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorporated as a raw material during the premix stage of processing, and a laboratory investigation is recommended to optimize the concentration and processing conditions for a particular formulation. view less | |
| Epomatt™ G-151 | Estron Chemical, Inc. | Epomatt™ G-151 is a special type of gloss modifier for epoxy-based powder coatings. Using 8-10 phr of Epomatt™ G-151 with an epoxy resin cured with 3-6 phr of an epoxy curing agent such as Estron’s Epoxy Hardener G-91, most accelerated dicyandiamides, or ...view more Epomatt™ G-151 is a special type of gloss modifier for epoxy-based powder coatings. Using 8-10 phr of Epomatt™ G-151 with an epoxy resin cured with 3-6 phr of an epoxy curing agent such as Estron’s Epoxy Hardener G-91, most accelerated dicyandiamides, or o-tolyl biguanide (OTB) can produce an exceptionally smooth, matte coating with good mechanical and chemical resistance properties. view less | |
| Epomatt™ G-152 | Estron Chemical, Inc. | Epomatt™ G-152 is a carboxyl-functional, solid acrylic resin for matting epoxy-based powder coatings and is best suited to create 60° gloss values <10. The formulated coatings demonstrate good smoothness and exceptional mechanical and chemical resistance ...view more Epomatt™ G-152 is a carboxyl-functional, solid acrylic resin for matting epoxy-based powder coatings and is best suited to create 60° gloss values <10. The formulated coatings demonstrate good smoothness and exceptional mechanical and chemical resistance properties. In contrast to powders made with other gloss modification technologies, those formulated with Epomatt™ G-152 show little or no gloss deviation when exposed to varying oven or storage temperatures. view less | |
| Epoxy Hardener G-91 | Estron Chemical, Inc. | Epoxy Hardener G-91 is an imidazole type of curing agent for epoxy-based powder coatings. Coatings cured with Epoxy Hardener G-91 show excellent chemical resistance, mechanical properties, and the capability for low temperature cure. | |
| Epoxy Hardener G-92 | Estron Chemical, Inc. | Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings a...view more Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings are noted. view less | |
| Escat™ 110 | Estron Chemical, Inc. | Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy,...view more Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, and polyesters cured by GMA functional acrylics. Escat™ 110's benefits include that it is to reduce the cure temperature of a particular system, or shorten the required bake time at a given cure temperature. view less | |
| Escat™ 22 | Estron Chemical, Inc. | Escat™ 22 is a powder coating additive capable of improving the mechanical and solvent resistance properties. Escat™ 22 can be used in matte polyester powder coatings cured with the Isocryl matting hardeners EP-550, EP-560 and EP-570. | |
| Escat™ 50 | Estron Chemical, Inc. | Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction...view more Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems as well. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy and polyesters cured by GMA-functional acrylics. Polyester-TGIC and polyester-PT-910 reactions can also be accelerated. Escat™ 50 can reduce the cure temperature of a particular system or shorten the required bake time at a given cure temperature without sacrificing DOI or flow and leveling properties. view less | |
| Escat™ 60 | Estron Chemical, Inc. | Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 6...view more Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 60 include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, polyesters cured by GMA-functional acrylics, polyester-TGIC and polyester-PT-910. Escat™ 60 reduces the cure temperature of a particular system and shortens the required bake time at a given cure temperature when compared to non-catalyzed systems. view less | |
| Glycidyl Methacrylate (GMA) High Purity | Estron Chemical, Inc. | Glycidyl Methacrylate (GMA) High Purity provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy che...view more Glycidyl Methacrylate (GMA) High Purity provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy chemistries can provide improved synergistic physical functions and properties. It has a minimum purity of 98.5%. Glycidyl Methacrylate (GMA) High Purity can be used in printing inks, resins in the electronics industry, acrylic enamels for auto top-coats and appliances, and thermosetting acrylics for can coatings. view less | |
| Glycidyl Methacrylate (GMA) Regular Grade | Estron Chemical, Inc. | Glycidyl Methacrylate (GMA) Regular Grade provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy c...view more Glycidyl Methacrylate (GMA) Regular Grade provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy chemistries can provide improved synergistic physical functions and properties. It has a minimum purity of 97.5%. Glycidyl Methacrylate (GMA) Regular Grade can be used in printing inks, resins in the electronics industry, acrylic enamels for auto top-coats and appliances, and thermosetting acrylics for can coatings. view less | |
| GMA-300 | Estron Chemical, Inc. | GMA-300 is a highly functional, glycidyl-functional acrylic polymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used either as a sole curing agent for polyesters to make polyest...view more GMA-300 is a highly functional, glycidyl-functional acrylic polymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used either as a sole curing agent for polyesters to make polyester acrylic hybrids, or as a fortifying additive resin at amounts of 15% in systems such as polyester TGIC or hybrids to boost crosslink density, film hardness and chemical resistance. The dosage of GMA-300 as a crosslinker depends on the equivalent weight of the polyester resin. view less | |
| GMA-400 | Estron Chemical, Inc. | GMA-400 is a solid, high-functionality glycidyl acrylic polymer capable of reacting with carboxyl and amine functional compounds. It can be used either as a sole curing agent for acid-functional polyester resins to make polyester/acrylic hybrids, or as a ...view more GMA-400 is a solid, high-functionality glycidyl acrylic polymer capable of reacting with carboxyl and amine functional compounds. It can be used either as a sole curing agent for acid-functional polyester resins to make polyester/acrylic hybrids, or as a fortifying additive resin at low loadings in systems such as polyester/TGIC. GMA-400 can also be used in hybrid systems to boost crosslink density and increase film hardness/chemical resistance. view less | |
| GMA-500 | Estron Chemical, Inc. | GMA-500 is a solid, glycidyl-functional acrylic crosslinker for exterior durable powder coatings. It is highly branched and can cure with carboxyl and amine-functional compounds. For example, GMA-500 can be used as the sole crosslinking agent with a linea...view more GMA-500 is a solid, glycidyl-functional acrylic crosslinker for exterior durable powder coatings. It is highly branched and can cure with carboxyl and amine-functional compounds. For example, GMA-500 can be used as the sole crosslinking agent with a linear carboxyl polyester resin to create an 75/25 polyester/acrylic hybrid powder coating for protective purposes or cured with dodecanedioic acid to make smooth, high gloss, clear top coats. view less | |
| Grilonit® MA 68022 | Estron Chemical, Inc. | Grilonit® MA 68022 is a wax additive suitable for use in all types of powder coatings. It can be used for the formulation of satin and matte finishes. Powder coatings containing Grilonit® MA 68022 also exhibit improved scratch resistance. | |
| Grilonit® V 68-39 | Estron Chemical, Inc. | Grilonit® V 68–39 is specifically designed for powder coatings and is suitable for all types of powder coating. This additive offers excellent gloss reduction for satin and matt powder coating finishes with excellent flow and enhanced mar and scratch resi...view more Grilonit® V 68–39 is specifically designed for powder coatings and is suitable for all types of powder coating. This additive offers excellent gloss reduction for satin and matt powder coating finishes with excellent flow and enhanced mar and scratch resistance. Grilonit® V 68–39 is non-yellowing in powder coatings at temperatures between 150°C and 230°C. Due to the finely micron zed particle size, Grilonit® V 68–39 can be used as a post additive after the extrusion process for gloss control for example in dry blend powder coatings. view less | |
| Isocryl® C-70 | Estron Chemical, Inc. | Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford co...view more Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford coatings or adhesives with excellent chemical resistance, flexibility, outdoor durability, green strength, modulus and impact resistance. Because of its relatively high acid value, Isocryl® C-70 may provide enhanced adhesion to certain substrates and may be a good pigment dispersing resin. view less | |
| Isocryl® EP-1110 | Estron Chemical, Inc. | Isocryl® EP-1110 is a glycidyl functional acrylic resin which may be formulated with a variety of chemistry compositions. Isocryl® EP-1110 can be formulated in chemistry compositions such as carboxyl, amino, or hydroxyl that react with glycidyl resins to ...view more Isocryl® EP-1110 is a glycidyl functional acrylic resin which may be formulated with a variety of chemistry compositions. Isocryl® EP-1110 can be formulated in chemistry compositions such as carboxyl, amino, or hydroxyl that react with glycidyl resins to produce cured coatings with high hardness and good weather-ability. view less | |
| Isocryl® EP-450 | Estron Chemical, Inc. | Isocryl® EP-450 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® ...view more Isocryl® EP-450 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® EP-450, with a Tg of 68°C, has the added feature of high resistance to sintering at storage temperatures of up to 40°C. Isocryl® EP-450 is recommended for locations where climate controlled storage is not accessible. view less | |
| Isocryl® EP-452 | Estron Chemical, Inc. | Isocryl® EP-452 is a general purpose flow control system for a broad spectrum of epoxy functional acrylic resins, notably GMA acrylic clearcoats. At additive levels of 5-10% it provides outstanding clarity, smoothness, and recoatability. In addition, EP-4...view more Isocryl® EP-452 is a general purpose flow control system for a broad spectrum of epoxy functional acrylic resins, notably GMA acrylic clearcoats. At additive levels of 5-10% it provides outstanding clarity, smoothness, and recoatability. In addition, EP-452 affords excellent distributive mixing during the premixing stage and dispersion in the extrusion phase of the powder coating manufacturing process. view less | |
| Isocryl® EP-455 | Estron Chemical, Inc. | Isocryl® EP-455 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® ...view more Isocryl® EP-455 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® EP-455, with a Tg of 59°C, demonstrates a balance of properties between Isocryl® EP-450 and EP-555 for finished powder coating stability and cured film smoothness. view less | |
| Isocryl® EP-540 | Estron Chemical, Inc. | Isocryl® EP-540 is a glycidyl-functional acrylic copolymer designed for use as a hardener capable of producing exterior durable polyester powder coatings with controllable mid-range gloss. Isocryl® EP-540 has additional benefits, which include chemical an...view more Isocryl® EP-540 is a glycidyl-functional acrylic copolymer designed for use as a hardener capable of producing exterior durable polyester powder coatings with controllable mid-range gloss. Isocryl® EP-540 has additional benefits, which include chemical and impact resistance, low contamination profile, and smoothness. view less | |
| Isocryl® EP-550 | Estron Chemical, Inc. | Isocryl® EP-550 is the original matting hardener of the Isocryl® line that now includes EP-550, EP-560 and EP-570. Isocryl® EP-550 can be formulated with low viscosity, linear, carboxyl-functional polyesters, having acid values 30-35, to generate low-glos...view more Isocryl® EP-550 is the original matting hardener of the Isocryl® line that now includes EP-550, EP-560 and EP-570. Isocryl® EP-550 can be formulated with low viscosity, linear, carboxyl-functional polyesters, having acid values 30-35, to generate low-gloss, weatherable, TGIC-free powder coating systems. A typical binder consists of 75 parts polyester and 25 parts Isocryl® EP-550. view less | |
| Isocryl® EP-550G | Estron Chemical, Inc. | Isocryl® EP-550G is the ground version of Isocryl® EP-550 resin flakes. This GMA acrylic resin is the original matting hardener of the Isocryl® line that now includes EP-550/550G, EP-560 and EP-570. Isocryl® EP-550G can be formulated with low viscosity, l...view more Isocryl® EP-550G is the ground version of Isocryl® EP-550 resin flakes. This GMA acrylic resin is the original matting hardener of the Isocryl® line that now includes EP-550/550G, EP-560 and EP-570. Isocryl® EP-550G can be formulated with low viscosity, linear, carboxyl-functional polyesters having acid values 30-35 to generate low-gloss, weatherable, TGIC-free powder coating systems. view less | |
| Isocryl® EP-555 | Estron Chemical, Inc. | Isocryl® EP-555 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® ...view more Isocryl® EP-555 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® EP-555, with a Tg of 53°C, has the smoothest appearance of comparable resins, notably at low bake temperatures. It is recommended where distinctness of image is the critical aesthetic criterion. view less | |
| Isocryl® EP-560 | Estron Chemical, Inc. | Isocryl® EP-560 is a novel glycidyl functional acrylic resin used for the gloss modification of exterior durable polyester powder coatings. As with its predecessor, Isocryl® EP-550, “one shot”, matte, TGICfree, weatherable finishes can be produced with Is...view more Isocryl® EP-560 is a novel glycidyl functional acrylic resin used for the gloss modification of exterior durable polyester powder coatings. As with its predecessor, Isocryl® EP-550, “one shot”, matte, TGICfree, weatherable finishes can be produced with Isocryl® EP-560 in conjunction with acid functional linear polyesters. view less | |
| Isocryl® EP-560G | Estron Chemical, Inc. | Isocryl® EP-560G is the ground version of Isocryl® EP-560 resin flakes. Isocryl® EP-560G is a novel glycidyl functional acrylic resin used for the gloss modification of exterior durable polyester powder coatings. As with its predecessor, Isocryl® EP-550, ...view more Isocryl® EP-560G is the ground version of Isocryl® EP-560 resin flakes. Isocryl® EP-560G is a novel glycidyl functional acrylic resin used for the gloss modification of exterior durable polyester powder coatings. As with its predecessor, Isocryl® EP-550, “one shot”, matte, TGIC-free, weatherable finishes can be produced with Isocryl® EP-560G in conjunction with acid functional linear polyesters. view less | |
| Isocryl® EP-570 | Estron Chemical, Inc. | Isocryl® EP-570 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and dependable performance. Isocryl® EP-570 can produce “one-sh...view more Isocryl® EP-570 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and dependable performance. Isocryl® EP-570 can produce “one-shot”, low gloss coatings in conjunction with 30-35 acid value polyesters. view less | |
| Isocryl® EP-575 | Estron Chemical, Inc. | Isocryl® EP-575 is a glycidyl-functional acrylic co-polymer designed for use as a hardener capable of producing matte exterior-durable polyester powder coatings. These coatings have impact and chemical resistance compared to previous generations of acryli...view more Isocryl® EP-575 is a glycidyl-functional acrylic co-polymer designed for use as a hardener capable of producing matte exterior-durable polyester powder coatings. These coatings have impact and chemical resistance compared to previous generations of acrylic matting hardeners. Isocryl® EP-575's additional benefits include smooth cured film appearance and low contamination characteristics. view less | |
| Isocryl® H-1871 | Estron Chemical, Inc. | Isocryl® H-1871 is a solid, hydroxyl-functional acrylic resin specifically designed for one-shot, low to mid-gloss, exterior durable polyurethane powder coatings. Isocryl® H-1871 is used in conjunction with conventional or super-durable hydroxyl polyester...view more Isocryl® H-1871 is a solid, hydroxyl-functional acrylic resin specifically designed for one-shot, low to mid-gloss, exterior durable polyurethane powder coatings. Isocryl® H-1871 is used in conjunction with conventional or super-durable hydroxyl polyesters to be cured with blocked isocyanate or uretdione hardeners. view less | |
| Isocryl® H-60 | Estron Chemical, Inc. | Isocryl® H-60 is a general purpose, moderate Tg acrylic resin. It has a relatively low isocyanate demand and is solid hydroxyl functional. It is also available in solution form (n-butyl acetate) as Isocryl H-60S at 50% solids. Isocryl® H-60 provides cure...view more Isocryl® H-60 is a general purpose, moderate Tg acrylic resin. It has a relatively low isocyanate demand and is solid hydroxyl functional. It is also available in solution form (n-butyl acetate) as Isocryl H-60S at 50% solids. Isocryl® H-60 provides cured coatings with outstanding chemical resistance and weatherability, and is suitable for use in 2K solution polyurethane or melamine cure formulations. view less | |
| Isocryl® N-2513 | Estron Chemical, Inc. | Isocryl® N-2513 is a solid, non-reactive, moderate molecular weight acrylic resin provided in flake form. The product is suitable for use as a primary binder resin or modifying resin when formulated in reactive (thermal or UV cure) or non-reactive (solven...view more Isocryl® N-2513 is a solid, non-reactive, moderate molecular weight acrylic resin provided in flake form. The product is suitable for use as a primary binder resin or modifying resin when formulated in reactive (thermal or UV cure) or non-reactive (solventborne air dry) inks or coatings for application to plastic or metallic substrates. Isocryl® N-2513 provides improved adhesion, flexibility, impact resistance, and pigment dispersion. view less | |
| Lumicryl® 1000 | Estron Chemical, Inc. | Lumicryl® 1000 is a unique energy curable (UV/EB) acrylic resin designed to help promote adhesion to low energy surfaces such as polyethylene, polypropylene, polyesters, other thermoplastics or thermosets, metals, and coated paper substrates. Alternativel...view more Lumicryl® 1000 is a unique energy curable (UV/EB) acrylic resin designed to help promote adhesion to low energy surfaces such as polyethylene, polypropylene, polyesters, other thermoplastics or thermosets, metals, and coated paper substrates. Alternatively, Lumicryl® 1000 may be appropriate for use as the major film forming component of UV curable coatings. view less | |
| Lumicryl® 101S | Estron Chemical, Inc. | Lumicryl® 101S is a UV/EB-curable acrylic macromer suitable for formulating coatings and inks. Cured coatings based on Lumicryl® 101S have abrasion and chemical resistance. Lumicryl® 101S can be used to formulate clear, pigmented or highly filled systems....view more Lumicryl® 101S is a UV/EB-curable acrylic macromer suitable for formulating coatings and inks. Cured coatings based on Lumicryl® 101S have abrasion and chemical resistance. Lumicryl® 101S can be used to formulate clear, pigmented or highly filled systems. Lumicryl® 101S can be used on film, laminate, plastic, metal, wood, paper or other substrates. view less | |
| Lumicryl® 1928 | Estron Chemical, Inc. | Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-form...view more Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations for various applications. view less | |
| Lumicryl® U-721S | Estron Chemical, Inc. | Lumicryl® U-721S is a UV/EB-curable acrylic macromer suitable for formulating coatings and inks. Cured coatings based on Lumicryl® U-721S have abrasion, scratch and chemical resistance, and mechanical properties (e.g. adhesion and flexibility). Lumicryl®...view more Lumicryl® U-721S is a UV/EB-curable acrylic macromer suitable for formulating coatings and inks. Cured coatings based on Lumicryl® U-721S have abrasion, scratch and chemical resistance, and mechanical properties (e.g. adhesion and flexibility). Lumicryl® U-721S can be used to formulate clear, pigmented or highly filled systems. It is 60-70% solids in Butyl Acetate. Lumicryl® U-721S is applied on film, laminate, plastic, metal, wood, paper or other substrates. view less | |
| Octaflow ST-70 | Estron Chemical, Inc. | Octaflow ST-70 is the tin-based liquid catalyst stannous octoate adsorbed onto a silica carrier. The additive may be used in both e-caprolactam blocked polyurethane powder coatings and the internally blocked uretdione systems. Octaflow ST-70 is incorporat...view more Octaflow ST-70 is the tin-based liquid catalyst stannous octoate adsorbed onto a silica carrier. The additive may be used in both e-caprolactam blocked polyurethane powder coatings and the internally blocked uretdione systems. Octaflow ST-70 is incorporated as a raw material during the premix stage of processing. view less | |
| Oxymelt® A-2 | Estron Chemical, Inc. | Oxymelt® A-2 is an additive capable of both reducing the melt viscosity of powder coating formulations and eliminating pinholes without affecting the applied film color. Oxymelt® A-2 is noted primarily for its degassing capability in powder coatings cured...view more Oxymelt® A-2 is an additive capable of both reducing the melt viscosity of powder coating formulations and eliminating pinholes without affecting the applied film color. Oxymelt® A-2 is noted primarily for its degassing capability in powder coatings cured in gas ovens. This degassing agent is well suited for polyester-HAA and polyurethane systems that emit volatiles during cure, and Oxymelt® A-2 is also appropriate for other traditional powder coating systems such as polyester-TGIC, hybrids, acrylics and epoxies. view less | |
| Oxymelt® A-4 | Estron Chemical, Inc. | Oxymelt® A-4 is capable of both reducing the melt viscosity of powder coating formulations and eliminating surface defects, especially pinholes, without affecting the applied film color. The additive is noted primarily for its degassing capability in powd...view more Oxymelt® A-4 is capable of both reducing the melt viscosity of powder coating formulations and eliminating surface defects, especially pinholes, without affecting the applied film color. The additive is noted primarily for its degassing capability in powder coatings cured in electric ovens. Oxymelt® A-4 can replace part or all of the benzoin in a powder coating formulation, and is non-yellowing, non-fuming and imparts superior anti-gassing properties. view less | |
| Oxymelt® A-6 | Estron Chemical, Inc. | Oxymelt® A-6 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also u...view more Oxymelt® A-6 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also useful in polyester-TGIC, hybrid, epoxy, and acrylic systems. Oxymelt® A-6 is not recommended, however, for use in polyurethane systems. view less | |
| Oxymelt® A-7 | Estron Chemical, Inc. | Oxymelt® A-7 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also u...view more Oxymelt® A-7 is capable of reducing the melt viscosity of powder coating formulations and eliminating pinhole defects. It is particularly effective as an degassing additive in polyester-hydroxyalkylamide (HAA) systems at thicker film builds, and is also useful in polyester-TGIC, hybrid, epoxy, and acrylic systems. Oxymelt® A-7 is not recommended, however, for use in polyurethane systems. This product is experimental and subject to change. view less | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...view more Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...view more Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| Primid® QM-1260 | Estron Chemical, Inc. | Primid® QM-1260 is an improved hydroxy-alkylamide cross-linker for the formulation of exterior, durable powder coatings. The color stability of Primid® QM-1260, particularly when cured in direct fired gas ovens, combined with a favorable toxicological pro...view more Primid® QM-1260 is an improved hydroxy-alkylamide cross-linker for the formulation of exterior, durable powder coatings. The color stability of Primid® QM-1260, particularly when cured in direct fired gas ovens, combined with a favorable toxicological profile, makes this cross-linker exceptionally suitable for powder coatings where high color stability is required. view less | |
| Primid® XL-552 | Estron Chemical, Inc. | Primid® XL-552 is a hydroxyalkylamide crosslinker for the formulation of exterior durable powder coatings. It can be used in combination with carboxyl-terminated polyesters. The constant and high reactivity of Primid® XL-552 combined with a favourable tox...view more Primid® XL-552 is a hydroxyalkylamide crosslinker for the formulation of exterior durable powder coatings. It can be used in combination with carboxyl-terminated polyesters. The constant and high reactivity of Primid® XL-552 combined with a favourable toxicological profile makes this cross-linker the industry standard for exterior durable powder coatings. view less | |
| Resiflow® 2N | Estron Chemical, Inc. | Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in...view more Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in the pigment dispersion prior to letdown, Resiflow® 2N may alleviate pigment floating and foam formation. The product is suitable for use in acrylic, alkyd, epoxy, polyester, and other industrial coatings systems. view less | |
| Resiflow® 3N | Estron Chemical, Inc. | Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow...view more Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow® 3N is beneficial in alleviating brush and roller marks, picture framing, edge pull and sagging, as well as promoting a uniform, level surface. view less | |
| Resiflow® CP-77 | Estron Chemical, Inc. | Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the co...view more Resiflow® CP-77 is a reprocessing aid useful for minimizing or eliminating powder coating surface imperfections such as craters or color specs caused by cross-contamination during manufacturing. Typically, 0.25 – 0.5% of Resiflow® CP-77 is added to the contaminated flakes or powder, premixed, reextruded, and then further processed in the conventional manner. Bits or protrusions are unlikely to be remediated by reprocessing, and Resiflow® CP-77 may obviate that type of surface defect. view less | |
| Resiflow® L | Estron Chemical, Inc. | Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve fl...view more Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...view more Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less | |
| Resiflow® L-3075 | Estron Chemical, Inc. | Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellen...view more Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellent air release, improved film characteristics, and resistance to dirt-pick up. view less | |
| Resiflow® L-37 | Estron Chemical, Inc. | Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...view more Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. view less | |
| Resiflow® L-45D | Estron Chemical, Inc. | Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and or...view more Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel. Resiflow® L-45D can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Resiflow® L-64F | Estron Chemical, Inc. | Resiflow® L-64F is a carboxyl functional, viscous acrylic flow control agent that can be used in high solids, solvent borne, UV curable, and other paint systems. Resiflow® L-64F can act as an air release agent, reduce or eliminate surface defects such as ...view more Resiflow® L-64F is a carboxyl functional, viscous acrylic flow control agent that can be used in high solids, solvent borne, UV curable, and other paint systems. Resiflow® L-64F can act as an air release agent, reduce or eliminate surface defects such as craters, pinholes and fisheyes, as well as improve flow and leveling. The recommended dosage of Resiflow® L-64F is 0.2-1.5% based on binder solids. view less | |
| Resiflow® L-64F MBE-1 | Estron Chemical, Inc. | Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat fo...view more Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat formulations. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the epoxy resin and thus is very easily incorporated into the final formulation. view less | |
| Resiflow® L-64F MBP-10 | Estron Chemical, Inc. | Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into t...view more Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the polyester resin and thus is very easily incorporated into the final formulation. This product has been designed for a balance of optimal flow and clarity in PE-TGIC, PE-PT910 and PE-Primid clearcoat formulations. view less | |
| Resiflow® L-65F | Estron Chemical, Inc. | Resiflow® L-65F is an acrylic flow control agent that is used mainly in solvent borne automotive clearcoats such as two component urethanes, polyester-melamine or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F also affo...view more Resiflow® L-65F is an acrylic flow control agent that is used mainly in solvent borne automotive clearcoats such as two component urethanes, polyester-melamine or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. view less | |
| Resiflow® L-65F MBH-2 | Estron Chemical, Inc. | Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in pol...view more Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in polyester-urethane clearcoat formulations. view less | |
| Resiflow® L-65F-50 | Estron Chemical, Inc. | Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. ...view more Resiflow® L-65F-50 is 50% solutions of acrylic flow control agent with butyl acetate or acetone that is used mainly in solvent borne automotive clearcoats. It is used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing excellent leveling, Resiflow® L-65F-50 also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and good anti-pop/solvent-popping characteristics. view less | |
| Resiflow® L-65F-50 BA | Estron Chemical, Inc. | Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-me...view more Resiflow® L-65F-50 BA is 50% solutions of acrylic flow control agent with butyl acetate or acetone that are used mainly in solvent borne automotive clearcoats. It can be used in systems such as two component urethane, polyester-melamine, or polyacrylic-melamine. In addition to providing leveling, Resiflow® L-65F-50 BA also affords three other notable attributes: clarity in non-pigmented systems, improved formulation robustness and cratering resistance from overspray, and anti-pop/solvent-popping characteristics. view less | |
| Resiflow® L-66F | Estron Chemical, Inc. | Resiflow® L-66F is a high viscosity, carboxyl functional polyacrylate flow control agent. As with the other two carboxyl functional flow control agents in this group of specialty additives, Resiflow® L-64F and L-65F, the typical dosage of Resiflow® L-66F ...view more Resiflow® L-66F is a high viscosity, carboxyl functional polyacrylate flow control agent. As with the other two carboxyl functional flow control agents in this group of specialty additives, Resiflow® L-64F and L-65F, the typical dosage of Resiflow® L-66F is 0.2-1.5% based on binder solids. Resiflow® L-66F can be used in a variety of coating systems and provides exceptional clarity in clearcoat systems. view less | |
| Resiflow® L-66F MBP-10 | Estron Chemical, Inc. | Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clari...view more Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clarity in PE-TGIC clearcoat formulations. view less | |
| Resiflow® L-67 | Estron Chemical, Inc. | Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and lev...view more Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and leveling (orange peel) and can improve the flexibility of coatings. Resiflow® L-67 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems, as the product has compatibility with all coating resins. view less | |
| Resiflow® L5 | Estron Chemical, Inc. | Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel,...view more Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Resiflow® LF | Estron Chemical, Inc. | Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...view more Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Resiflow® LG-99 | Estron Chemical, Inc. | Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based...view more Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Resiflow® LH-240 | Estron Chemical, Inc. | Resiflow® LH-240 is a hydroxyl functional, viscous polyacrylate flow control agent. It is used in general industrial paints, gel coats, clearcoats and automotive paints. In addition to improving flow and leveling, Resiflow® LH-240 may also provide improve...view more Resiflow® LH-240 is a hydroxyl functional, viscous polyacrylate flow control agent. It is used in general industrial paints, gel coats, clearcoats and automotive paints. In addition to improving flow and leveling, Resiflow® LH-240 may also provide improved stain resistance, surface hardness and adhesion. The product has resin compatibility and is especially suitable for clear gel coat applications. view less | |
| Resiflow® LH-241 | Estron Chemical, Inc. | Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety o...view more Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety of binder chemistries to promote smoothness and gloss. Resiflow® LH-241 is well suited for coil coatings and clearcoats. view less | |
| Resiflow® LV | Estron Chemical, Inc. | Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...view more Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less | |
| Resiflow® LV MBP-10 | Estron Chemical, Inc. | Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder ...view more Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder coating formulations. view less | |
| Resiflow® LV-67 | Estron Chemical, Inc. | Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1....view more Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best processing method and the optimum concentration of the additive. view less | |
| Resiflow® P-37 | Estron Chemical, Inc. | Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other c...view more Resiflow® P-37 performs not only as a flow control agent but may also enhance the surface hardness and stain resistance in applications such as appliance and architectural powder coatings. The active ingredient is released and homogenized with the other components during extrusion, and this results in a uniform system. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P-37 into powder coating formulations. view less | |
| Resiflow® P-64F | Estron Chemical, Inc. | Resiflow® P-64F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-64F which has been converted into free-flowing powder by adsorption onto silica-type carrier....view more Resiflow® P-64F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-64F which has been converted into free-flowing powder by adsorption onto silica-type carrier. Resiflow® P-64F provides unique characteristics in a variety of powder coating formulations. In isocryl H-1871 formulations it is a key ingredient in one-shot, low to mid-gloss formulations.In PE-TGIC, hybrid and epoxy clearcoats it provides a balance of flow and clarity. In GMA Acrylic-DDDA clearcoat formulations it provides recoatability, clarity and appearance. In classical, pigmented powder coatings, Resiflow® P-64F enhances pigment wetting and displaces substrate moisture. view less | |
| Resiflow® P-65F | Estron Chemical, Inc. | Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier...view more Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-65F shows a marked improvement in clarity in non-pigmented hybrid and epoxy systems compared to a classical flow control agent, such as Resiflow® P-67. view less | |
| Resiflow® P-66F | Estron Chemical, Inc. | Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier....view more Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-66F shows a marked improvement in clarity in non-pigmented polyester-TGIC systems compared to classical flow control agents. view less | |
| Resiflow® P-67 | Estron Chemical, Inc. | Resiflow® P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries. This applies to chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. This product is base...view more Resiflow® P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries. This applies to chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. This product is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow® P-67 has a broad compatibility between powder coatings, which is another key characteristic of it. view less | |
| Resiflow® P-67A | Estron Chemical, Inc. | Resiflow® P-67A is a standard type flow control agent used in pigmented powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P-67A ...view more Resiflow® P-67A is a standard type flow control agent used in pigmented powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P-67A into pigmented powder coating formulations. view less | |
| Resiflow® PF-67 | Estron Chemical, Inc. | Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® P...view more Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PF-67 into powder coating formulations. This product is best suited for hybrid technology, but can be used in other binder systems such polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® PH-240 | Estron Chemical, Inc. | Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat a...view more Resiflow® PH-240 is a specialty powder flow control agent that is based on a hydroxyl functional polymer that has been converted into free-flowing powder by adsorption onto silica-type carrier. It can impart increased surface polarity, improve intercoat adhesion and wetting on hydrophilic substrates such as sandblasted or unpolished metal. Resiflow® PH-240 can also improve or eliminate surface defects including orange peel, pinholes and craters. view less | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| Resiflow® PL-200 | Estron Chemical, Inc. | Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its s...view more Resiflow® PL-200 is noted for its superior flow and leveling characteristics, excellent re-coatability and intercoat adhesion properties, all of which are essential attributes for powder coating primers. Resiflow® PL-200 is widely used and known for its suitability and reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® PL-200A | Estron Chemical, Inc. | Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and E...view more Resiflow® PL-200A is a classical type of powder flow control agent. This product is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PL-200A into pigmented powder coating formulations. view less | |
| Resiflow® PL-200B | Estron Chemical, Inc. | Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performa...view more Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. view less | |
| Resiflow® PL-210 | Estron Chemical, Inc. | Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance a...view more Resiflow® PL-210 is noted for its performance in extremely demanding powder coating applications that require improved gloss, and wet look and smoothness, compared to other classical type flow control additives. Resiflow® PL-210 has reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® PL-220 | Estron Chemical, Inc. | Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple ...view more Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® PV-60 | Estron Chemical, Inc. | Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such...view more Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 1-2% of Resiflow® PV-60 into powder coating formulations. view less | |
| Resiflow® PV-88 | Estron Chemical, Inc. | Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Re...view more Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow ® PV-88 is well suited for a spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Resiflow® S | Estron Chemical, Inc. | Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder...view more Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder content. Resiflow® S is suitable for solvent borne coatings including primers and coil coatings. view less | |
| SBS-1200 Wax | Estron Chemical, Inc. | SBS-1200 Wax is a general purpose, synthetic wax used in powder coatings to impart slip, improve mar resistance and lower gloss. Dosages of 0.5-1% can provide improved slip and surface appearance, as well as increased degassing capability. SBS-1200 Wax ca...view more SBS-1200 Wax is a general purpose, synthetic wax used in powder coatings to impart slip, improve mar resistance and lower gloss. Dosages of 0.5-1% can provide improved slip and surface appearance, as well as increased degassing capability. SBS-1200 Wax can be used in a wide array of binders such as polyesters, hybrids, polyurethanes and epoxies. view less | |
| SBS-1215 Wax | Estron Chemical, Inc. | SBS-1215 Wax is a special polyolefin-PTFE composition used in powder coatings to provide exceptional scratch, abrasion, mar and water resistance. Dosages of 0.5-1% are used to achieve optimal slip properties and mar resistance. It has a melting point of 1...view more SBS-1215 Wax is a special polyolefin-PTFE composition used in powder coatings to provide exceptional scratch, abrasion, mar and water resistance. Dosages of 0.5-1% are used to achieve optimal slip properties and mar resistance. It has a melting point of 100 to 108 degrees Celsius. SBS-1215 Wax imparts slip, lowers gloss and can be used in a wide array of binders such as polyesters, hybrids, polyurethanes and epoxies. view less | |
| Sulfonex™ M-80 | Estron Chemical, Inc. | Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticize...view more Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticizers. Solutions of Sulfonex™ M-80 have a low viscosity and offer the advantage of formulating high solids lacquers. Sulfonex™ M-80 improves the compatibility of resins with plasticizers and pigments which may otherwise remain incompatible. In adhesives formulations, Sulfonex™ M-80 helps in bonding many substrates such as cellophane and aluminum foils to themselves or to paper. view less |
