| Anhydrous TMEDA | Buckman Laboratories, Inc. | Anhydrous N,N,N1,N1,-Tetramethylethylenediamine (ATMEDA) is a difunctional tertiary amine used as a chemical intermediate in the manufacture of rubber compounds and antimicrobial quaternary ammonium copolymers. This product is clear, colorless to pale yel...view more Anhydrous N,N,N1,N1,-Tetramethylethylenediamine (ATMEDA) is a difunctional tertiary amine used as a chemical intermediate in the manufacture of rubber compounds and antimicrobial quaternary ammonium copolymers. This product is clear, colorless to pale yellow in appearance and exhibits a strong amine or fishy odor. view less | |
| BL-693 | Buckman Laboratories, Inc. | BL-693 is a delayed action amine catalyst based on ATMEDA, Buckman Laboratories' traditional amine catalyst. BL-693 will provide the same catalytic activity as ATMEDA while allowing the formulator more flexibility in mixing and mold filling times. This...view more BL-693 is a delayed action amine catalyst based on ATMEDA, Buckman Laboratories' traditional amine catalyst. BL-693 will provide the same catalytic activity as ATMEDA while allowing the formulator more flexibility in mixing and mold filling times. This product will consistently reduce friability in foam applications. The product also has the potential to act as a curing catalyst at higher use levels. Buckman recommends testing BL-693 to determine the appropriate use level for each foam system. view less | |
| Bodoxin™ | Arxada – Troy Corporation | Bodoxin™ in-can preservative is a biocide based on a combination of an aliphatic hemiacetal and isothiazolones. This combination of fast and stable actives offers good disinfecting as well as long-term protection properties. This product has a broad spect...view more Bodoxin™ in-can preservative is a biocide based on a combination of an aliphatic hemiacetal and isothiazolones. This combination of fast and stable actives offers good disinfecting as well as long-term protection properties. This product has a broad spectrum of efficacy against gram-positive and gram-negative bacteria, yeasts, and molds. Bodoxin™ is also effective against Legionella pneumophila. view less | Request Sample |
| Bodoxin™ AE | Arxada – Troy Corporation | Bodoxin™ AE in-can preservative is a highly concentrated formulation of a fast acting aliphatic hemiacetal. It is effective in slightly acidic to slightly alkaline media and miscible with water at all ratios. Bodoxin™ AE in-can preservative is highly effe...view more Bodoxin™ AE in-can preservative is a highly concentrated formulation of a fast acting aliphatic hemiacetal. It is effective in slightly acidic to slightly alkaline media and miscible with water at all ratios. Bodoxin™ AE in-can preservative is highly effective against gram-positive and gram-negative bacteria as well as against yeasts and molds. view less | Request Sample |
| Bodoxin™ AH | Arxada – Troy Corporation | Bodoxin™ AH in can-preservative is a biocide based on an aliphatic hemiacetal. This active substance provides both fast and a long-lasting efficacy, including gram-positive and gram-negative bacteria as well as yeasts and molds. | Request Sample |
| Bodoxin™ AM | Arxada – Troy Corporation | Bodoxin™ AM in-can preservative is a combination of ethyleneglycol-hemiformal and chloromethylisothiazolone/methylisothiazolone. The product contains no stabilizing salts. Therefore it can also be easily incorporated into slat-sensitive dispersion product...view more Bodoxin™ AM in-can preservative is a combination of ethyleneglycol-hemiformal and chloromethylisothiazolone/methylisothiazolone. The product contains no stabilizing salts. Therefore it can also be easily incorporated into slat-sensitive dispersion products. Bodoxin™ AM is a highly concentrated biocide with an optimum pH range from the slightly acidic to slightly alkaline. The two active groups complement each other in the spectrum of efficacy and also in the time required for the effect. The efficacy of this product extends to gram-negative and gram-positive bacteria, molds, and yeasts. view less | Request Sample |
| Bodoxin™ AO | Arxada – Troy Corporation | Bodoxin™ AO in-can preservative is a combination of an aliphatic hemiacetal and an isothiazolone derivative. The highly concentrated product combines good wet-state preservation with head-space protection. The spectrum of efficacy includes gram-positive a...view more Bodoxin™ AO in-can preservative is a combination of an aliphatic hemiacetal and an isothiazolone derivative. The highly concentrated product combines good wet-state preservation with head-space protection. The spectrum of efficacy includes gram-positive and gram-negative bacteria and is particularly effective against yeasts and molds. view less | Request Sample |
| Bodoxin™ AX | Arxada – Troy Corporation | Bodoxin™ AX in-can preservative consists of a fast acting formaldehyde releaser and a mixture of chloromethylisothiazolone/methylisothiazolone (CMIT/MIT). The well balanced spectrum of activity shows good efficiency against gram-positive and gram-negative...view more Bodoxin™ AX in-can preservative consists of a fast acting formaldehyde releaser and a mixture of chloromethylisothiazolone/methylisothiazolone (CMIT/MIT). The well balanced spectrum of activity shows good efficiency against gram-positive and gram-negative bacteria as well as molds and yeasts. Bodoxin™ AX is designed to provide a very fast mode of action in combination with a long term protection. view less | Request Sample |
| Bodoxin™ GA | Arxada – Troy Corporation | Bodoxin™ GA in-can preservative consists of the actives (ethylenedioxy)-dimethanol and glutaraldehyde. The combination of these actives results in a product providing a good sanitizing efficacy as well as a good long lasting protection. This long lasting ...view more Bodoxin™ GA in-can preservative consists of the actives (ethylenedioxy)-dimethanol and glutaraldehyde. The combination of these actives results in a product providing a good sanitizing efficacy as well as a good long lasting protection. This long lasting efficacy also extends to head space protection and includes gram-positive and gram-negative bacteria, yeasts, and molds. view less | Request Sample |
| Bodoxin™ TG | Arxada – Troy Corporation | Bodoxin™ TG in-can preservative contains a combination of an aliphatic hemiacetal and benzisothiazolone. The biocide provides long-term storage and good temperature stability, as well as head space protection and wide spectrum of activity. This product is...view more Bodoxin™ TG in-can preservative contains a combination of an aliphatic hemiacetal and benzisothiazolone. The biocide provides long-term storage and good temperature stability, as well as head space protection and wide spectrum of activity. This product is therefore particularly suitable for the use in warm climatic zones. the antimicrobial efficacy of Bodoxin™ TG includes gram-positive and gram-negative bacteria, yeasts, and molds. view less | Request Sample |
| Bodoxin™ TX | Arxada – Troy Corporation | Bodoxin™ TX in-can preservative consists of an aliphatic hemiacetal and an isothiazolone derivative. The well-balanced spectrum of efficacy includes gram-positive and gram-negative bacteria as well as yeasts and molds. Bodoxin™ TX is a cost effective bioc...view more Bodoxin™ TX in-can preservative consists of an aliphatic hemiacetal and an isothiazolone derivative. The well-balanced spectrum of efficacy includes gram-positive and gram-negative bacteria as well as yeasts and molds. Bodoxin™ TX is a cost effective biocide suitable for various applications and provides reliable protection at low costs. view less | Request Sample |
| Bodoxin™ WF | Arxada – Troy Corporation | Bodoxin™ WF in-can preservative consists of a fast acting formaldehyde releaser and a mixture of chloromethylisothiazolone/methylisothiazolone (CMIT/MIT). The well balanced spectrum of activity shows good efficacy against gram-positive and gram-negative b...view more Bodoxin™ WF in-can preservative consists of a fast acting formaldehyde releaser and a mixture of chloromethylisothiazolone/methylisothiazolone (CMIT/MIT). The well balanced spectrum of activity shows good efficacy against gram-positive and gram-negative bacteria as well as molds and yeasts. Bodoxin™ WF is designed to provide a very fast mode of action in combination with a long term protection. view less | Request Sample |
| BSC™ 8007 | Buckman Laboratories, Inc. | BSC™ 8007 is 100% solids, zero VOC, nonionic dispersant for solvent-based coatings, tint pastes, and adhesives. It has the ability to aid in dispersing difficult-to-grind pigments, such as organic reds, yellows, and oranges, as well as various carbon blac...view more BSC™ 8007 is 100% solids, zero VOC, nonionic dispersant for solvent-based coatings, tint pastes, and adhesives. It has the ability to aid in dispersing difficult-to-grind pigments, such as organic reds, yellows, and oranges, as well as various carbon black pigments. The nonionic nature of this product makes it compatible in a wide range of coatings vehicles, allowing for ease of formulation. view less | |
| BSI® 189 | Buckman Laboratories, Inc. | BSI® 189 is a highly effective sodium polyacrylate dispersant for use in water-based coatings, tint pastes, adhesives, caulks, grouts, and sealants. It has been shown to minimize flocculation and has less of an adverse effect on in-can corrosion versus ot...view more BSI® 189 is a highly effective sodium polyacrylate dispersant for use in water-based coatings, tint pastes, adhesives, caulks, grouts, and sealants. It has been shown to minimize flocculation and has less of an adverse effect on in-can corrosion versus other sodium polyacrylates. This product is a 40% active greener alternative dispersing agent for water-based systems, and is zero VOC, low odor, and approved under FDA (21 CFR) 176.170. view less | |
| Bubond® 396 | Buckman Laboratories, Inc. | Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration ...view more Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration commonly known as “tannin staining.” Bubond® 396 can be post added to the coating or added in the letdown. In formulations that are pH-adjusted to the alkaline side, Bubond® 396 should preferably be added prior to neutralization since the product is acidic in nature and could cause pH shock if added directly into an alkaline system. view less | |
| Bubreak® 401 | Buckman Laboratories, Inc. | Bubreak® 401 is a concentrated liquid, highly cationic polymer that can be used as a flocculant or coagulant in effluent treatment programs. Bubreak 401 can be used in waste minimization programs for water-based paints, adhesives, or similar water-based s...view more Bubreak® 401 is a concentrated liquid, highly cationic polymer that can be used as a flocculant or coagulant in effluent treatment programs. Bubreak 401 can be used in waste minimization programs for water-based paints, adhesives, or similar water-based systems. A 10% (by weight) solution of Bubreak 401 should be made prior to application of this product. This product is readily soluble in water and this reduction allows the polymer to “unwind” to provide better flocculating properties. Use levels of this solution will vary from .01% to 2.0%, based on weight of the material to be treated. view less | |
| Bubreak® 4400 | Buckman Laboratories, Inc. | Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Adminis...view more Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4400 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. This product is effective in a wide range of resins, including acrylics, vinyl acrylics, poly vinyl acetates, and water-reducible alkyds. view less | |
| Bubreak® 4419 | Buckman Laboratories, Inc. | Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances app...view more Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances approved for use under 21 CFR § 176.200 and 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water- and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4419 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. The product has proven effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. view less | |
| Bubreak® 4479 | Buckman Laboratories, Inc. | Bubreak® 4479 is a defoamer concentrate. The product provides efficient foam control in a variety of situations, including acidic or alkaline systems, and over a broad range of conditions. Buckman recommends testing various levels to ensure adequate foam ...view more Bubreak® 4479 is a defoamer concentrate. The product provides efficient foam control in a variety of situations, including acidic or alkaline systems, and over a broad range of conditions. Buckman recommends testing various levels to ensure adequate foam protection. However, as with most defoamers, excessive amounts should be avoided. Bubreak® 4479 disperses readily in water and can be used without prior dilution. However, it is acceptable to dilute the product with water before use. For best results, add the concentration of around 10%. view less | |
| Bubreak® 448 | Buckman Laboratories, Inc. | Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric...view more Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric coatings), and 176.200 (Defoaming agents used in coatings) of the U.S. Food and Drug Administration regulations. Bubreak® 448 can be dispensed directly from shipping containers by chemical-metering pumps or suitable measuring containers. To prevent deterioration of the product, keep drum closed when not in use. Contamination with water or other extraneous materials should be avoided. For the best control of foam, Bubreak® 448 should be added as near to the point of foam formation as possible. It should also be added where there is vigorous mixing action. view less | |
| Bubreak® 4480 | Buckman Laboratories, Inc. | Bubreak® 4480 is a proprietary, water-based defoaming agent that is effective in promoting excellent foam control. This product does not contain any petroleum oils or hydrocarbons nor does it contain any amide-based products. Buckman recommends testing va...view more Bubreak® 4480 is a proprietary, water-based defoaming agent that is effective in promoting excellent foam control. This product does not contain any petroleum oils or hydrocarbons nor does it contain any amide-based products. Buckman recommends testing various levels to ensure adequate foam protection. However, as with most defoamers, excessive amounts should be avoided. view less | |
| Bubreak® 453 | Buckman Laboratories, Inc. | Bubreak® 453 is a concentrated product used as a foam-control agent for water-thinned paints and coatings, an air-release agent for polyester-resin spray and gel-coating operations, and a deaerator in gluing operations. Bubreak® 453 is allowed for use by ...view more Bubreak® 453 is a concentrated product used as a foam-control agent for water-thinned paints and coatings, an air-release agent for polyester-resin spray and gel-coating operations, and a deaerator in gluing operations. Bubreak® 453 is allowed for use by the U.S. Food and Drug Administration under Title 21 of the Code of Federal Regulations, § 175.105 (Adhesives), 175.300 (Resinous and polymeric coatings), and 176.200 (Defoaming agents used in coatings). view less | |
| Bubreak® 454C | Buckman Laboratories, Inc. | Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and ...view more Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 454C has been designed to perform as both an antifoam, fighting foam formulation, and as a defoamer, breaking down existing foam. It is effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. view less | |
| Bufloc® 528 | Buckman Laboratories, Inc. | Bufloc® 528 is a heavy metal precipitant used to remove metals from wastewater streams. It is particularly useful in the treatment of wastewater from paint production. The product is effective over a wide pH range and, when used as recommended, provides n...view more Bufloc® 528 is a heavy metal precipitant used to remove metals from wastewater streams. It is particularly useful in the treatment of wastewater from paint production. The product is effective over a wide pH range and, when used as recommended, provides nearly complete precipitation of metals, even in the presence of other chelating or sequestering agents. The sludge cake produced from its use as a heavy metal precipitant is compact, highly insoluble, and easily dewatered. view less | |
| Bufloc® 590 | Buckman Laboratories, Inc. | Bufloc® 590 is a high-molecular weight cationic emulsion acrylamide polymer. It can be used in applications requiring a cationic polyelectrolyte, including influent and effluent clarification, sludge thickening, lime softening, and sludge dewatering. Bufl...view more Bufloc® 590 is a high-molecular weight cationic emulsion acrylamide polymer. It can be used in applications requiring a cationic polyelectrolyte, including influent and effluent clarification, sludge thickening, lime softening, and sludge dewatering. Bufloc® 590 is a water-in-oil emulsion that must be diluted with water before use. This product should be made down to a dilution of 0.2%–1.0% prior to feeding using a suitable polymer make-down system. Dilutions of polymers should be used within 24 hours of inversion. The recommended feedrate for Bufloc® 590 for clarification applications is 0.25–5.0 ppm. Sludge dewatering applications may require much higher dosages. view less | |
| Bulab® 600 | Buckman Laboratories, Inc. | Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is s...view more Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amines or tin catalysts. view less | |
| Bulab® 685 | Buckman Laboratories, Inc. | Bulab® 685 is an 85% active grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) for use as a catalyst in water-blown polyurethane foam. TMEDA is a difunctional tertiary amine with little steric hindrance. It is a catalyst for the reaction between water ...view more Bulab® 685 is an 85% active grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) for use as a catalyst in water-blown polyurethane foam. TMEDA is a difunctional tertiary amine with little steric hindrance. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 685 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amine or tin catalysts. view less | |
| Bulab® Flamebloc | Buckman Laboratories, Inc. | Bulab® Flamebloc (barium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. Since it is borate based, Bulab® Flamebloc will provide char formation and subsequent smoke suppression. This produ...view more Bulab® Flamebloc (barium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. Since it is borate based, Bulab® Flamebloc will provide char formation and subsequent smoke suppression. This product is recommended for applications with stringent smoke requirements. It performs best when used as a synergist with halogen containing compounds. In many applications, Bulab® Flamebloc can be used as a partial or total replacement for antimony based compounds. Substitution of Bulab® Flamebloc for antimony trioxide in fire retardant products can provide the following benefits: raw material cost savings, reduced smoke, improved resistance to flameless combustion (afterglow suppression), and reduced toxicity of fumes emitted during combustion. view less | |
| Bulab® Flamebloc® 381 | Buckman Laboratories, Inc. | Bulab® Flamebloc® 381 is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. It can be used as a partial or total replacement for antimony-based compounds. | |
| Bulab® Flamebloc 428 | Buckman Laboratories, Inc. | Bulab® Flamebloc 428 (calcium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. It contains no lead, barium, zinc, or other regulated heavy metals. Since it is borate based, Bulab® Flamebloc...view more Bulab® Flamebloc 428 (calcium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. It contains no lead, barium, zinc, or other regulated heavy metals. Since it is borate based, Bulab® Flamebloc 428 will provide char formation and subsequent smoke suppression. This fine particle size material is easily incorporated into a formulation with maximum dispersibility. Bulab® Flamebloc 428 is recommended for applications with stringent smoke requirements. The product performs best when used as a synergist with halogen-containing compounds. In many applications, Bulab® Flamebloc 428 can be used as a partial replacement for antimony-based compounds. view less | |
| Bulab® Flamebloc 440 | Buckman Laboratories, Inc. | Bulab® Flamebloc 440 (barium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. Since it is borate based, Bulab® Flamebloc 440 will provide char formation and subsequent smoke suppression. Th...view more Bulab® Flamebloc 440 (barium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. Since it is borate based, Bulab® Flamebloc 440 will provide char formation and subsequent smoke suppression. This fine particle size material is easily incorporated into a formulation with maximum dispersibility. Bulab® Flamebloc 440 is recommended for applications with stringent smoke requirements. The product performs best when used as a synergist with halogen-containing compounds. In many applications, Bulab® Flamebloc 440 can be used as a partial replacement for antimony-based compounds. view less | |
| Busan® 1009 | Buckman Laboratories, Inc. | Busan® 1009 is a liquid microbicide combining the effectiveness of Methylene bis(thiocyanate) and 2-(Thiocyanomethylthio)benzothiazole for a broad spectrum of activity against both bacteria and fungi. It is also used in caulking compounds, sealants, and a...view more Busan® 1009 is a liquid microbicide combining the effectiveness of Methylene bis(thiocyanate) and 2-(Thiocyanomethylthio)benzothiazole for a broad spectrum of activity against both bacteria and fungi. It is also used in caulking compounds, sealants, and adhesives for protection against microbial degradation. This product is recommended for addition to clear and pigmented coatings to protect wood from fungal staining and decay and to prevent mold growth on the surface of the coating. The coating may be either solvent- or water-based. Busan® 1009 can be added to solvent systems prior to combining with the nonvolatiles, or it can be postadded to the finished solvent- or water-based coating. view less | |
| Busan® 1030 | Buckman Laboratories, Inc. | Busan® 1030 is a microbicide concentrate used as a preservative for caulking sealants and vinyl acetate wallcovering adhesives. The addition of Busan® 1030 to those products will inhibit the growth of fungi (mold, “mildew”) that often cause the discolorat...view more Busan® 1030 is a microbicide concentrate used as a preservative for caulking sealants and vinyl acetate wallcovering adhesives. The addition of Busan® 1030 to those products will inhibit the growth of fungi (mold, “mildew”) that often cause the discoloration, unsightly appearance, and degradation of the compounds, particularly when they are exposed to humid environments. Busan® 1030 is especially recommended for the protection of caulking sealants intended for use around bathtubs, showers, bathroom tiles, and vinyl acetate adhesives used on fabrics and paper for covering walls. view less | |
| Busan® 1058 | Buckman Laboratories, Inc. | Busan® 1058 is a 24% solution of Tetrahydro-3,5-dimethyl-2H-1,3,5-thiadiazine-2-thione. The product is an effective preservative for pigment slurries of high or low viscosity suspension, including those based on aluminum silicate (clay), calcium carbonate...view more Busan® 1058 is a 24% solution of Tetrahydro-3,5-dimethyl-2H-1,3,5-thiadiazine-2-thione. The product is an effective preservative for pigment slurries of high or low viscosity suspension, including those based on aluminum silicate (clay), calcium carbonate, and titanium dioxide. Busan® 1058 is composed of substances that have been allowed by the U.S. Food and Drug Administration for use in the manufacture of coated and uncoated paper and paperboard intended for food contact applications under 21 CFR § 176.230 and 176.300. Busan® 1058 has been tested against a large number of microorganisms, including those most frequently isolated from microbiologically contaminated or deteriorated pigment slurries. view less | |
| Busan® 1059 | Buckman Laboratories, Inc. | Busan® 1059 is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. It is approved for use under 21 CFR § 176.230 and 176.300 of the U.S. Food and Drug Administration regulations. All emulsions, emulsion-b...view more Busan® 1059 is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. It is approved for use under 21 CFR § 176.230 and 176.300 of the U.S. Food and Drug Administration regulations. All emulsions, emulsion-based coatings and adhesives, and slurries are subject to bacterial deterioration in their shipping or storage containers. Busan® 1059 has been specifically designed to provide protection against this type of bacterial attack. The concentration of Busan® 1059 required to prevent bacterial attack of emulsion paints will vary depending on a number of factors, including but not limited to: type and condition of raw materials used, microbial condition of the water used, pH of the paint, level of microbial contamination introduced to a particular batch, and cleanliness of the manufacturing facility and equipment. view less | |
| Busan® 1059-WS | Buckman Laboratories, Inc. | Busan® 1059-WS is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. It has been packaged in 1-lb water-soluble bags for ease of use and is approved under 21 CFR § 176.230 and 176.300 of the U.S. Food an...view more Busan® 1059-WS is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. It has been packaged in 1-lb water-soluble bags for ease of use and is approved under 21 CFR § 176.230 and 176.300 of the U.S. Food and Drug Administration regulations. All emulsions, emulsion-based coatings and adhesives, and slurries are subject to bacterial deterioration in their shipping or storage containers. Busan® 1059-WS has been specifically designed to provide protection against this type of bacterial attack view less | |
| Busan® 1059WS-4 | Buckman Laboratories, Inc. | Busan® 1059WS-4 is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. This product has been packaged in 1/4-lb water-soluble bags for ease of use and is approved under 21 CFR § 176.230 and 176.300 of the...view more Busan® 1059WS-4 is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. This product has been packaged in 1/4-lb water-soluble bags for ease of use and is approved under 21 CFR § 176.230 and 176.300 of the U.S. Food and Drug Administration regulations. All emulsions, emulsion-based coatings and adhesives, and slurries are subject to bacterial deterioration in their shipping or storage containers. Busan® 1059WS-4 has been specifically designed to provide protection against this type of bacterial attack. view less | |
| Busan® 1078 | Buckman Laboratories, Inc. | Busan® 1078 is a combination of two isothiazalone derivatives that can provide broad-spectrum micro-organism control in water-based coatings, adhesives, and architectural materials. It is a non foaming, water-based product that is readily bio degradable. ...view more Busan® 1078 is a combination of two isothiazalone derivatives that can provide broad-spectrum micro-organism control in water-based coatings, adhesives, and architectural materials. It is a non foaming, water-based product that is readily bio degradable. Busan® 1078 is particularly recommended for control of bacteria and wet-stage fungi in water-based coatings, latices, adhesives, spackling, grouting, caulks, joint cements, and mastices. This biocide is also useful in controlling bacteria and wet-stage fungi in the manufacture and storage of dispersed pigments, such as clay, titanium dioxide, calcium carbonate, etc. view less | |
| Busan® 11-M1 | Buckman Laboratories, Inc. | Busan® 11-M1 is a multifunctional pigment for protection against corrosion, tannin staining, and UV light. This product is also an effective fire retardant and is used extensively to enhance the long-term performance and durability of paints. Busan® 11-M1...view more Busan® 11-M1 is a multifunctional pigment for protection against corrosion, tannin staining, and UV light. This product is also an effective fire retardant and is used extensively to enhance the long-term performance and durability of paints. Busan® 11-M1 is the commercial form of modified barium metaborate monohydrate. It is 90+% active calculated as BaB2O4 H2O. view less | |
| Busan® 11-M2 | Buckman Laboratories, Inc. | Busan® 11-M2 is a multifunctional pigment for use in coatings as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer. Because it is multifunctional, Busan® 11-M2 can replace several products commonly formulated i...view more Busan® 11-M2 is a multifunctional pigment for use in coatings as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer. Because it is multifunctional, Busan® 11-M2 can replace several products commonly formulated into coating systems, simplifying formulating and lowering costs. Busan® 11-M2 is based on barium metaborate monohydrate. Due to the low refractive index (1.55–1.60), it can be used in a wide variety of colors, whites, and even clears. Busan® 11-M2 is composed of substances approved for use under 21 CFR § 176.180 of the U.S. Food and Drug Administration regulations. view less | |
| Busan® 1105 | Buckman Laboratories, Inc. | Busan® 1105 is a broad-spectrum, liquid fungicide for use in solvent-based stains, clear finishes, and wood preservatives. It has been formulated for improved solvency in solvent-based systems. This product is allowed for use under 21 CFR § 176.300 of the...view more Busan® 1105 is a broad-spectrum, liquid fungicide for use in solvent-based stains, clear finishes, and wood preservatives. It has been formulated for improved solvency in solvent-based systems. This product is allowed for use under 21 CFR § 176.300 of the U.S. Food and Drug Administration regulations. In stains and clear finishes, Busan® 1105 helps protect the coating film against disfigurement and deterioration from fungal attack. If these systems are registered as wood preservatives, the Busan® 1105 is also effective at inhibiting decay caused by wood-destroying fungi. view less | |
| Busan® 1118 | Buckman Laboratories, Inc. | Busan® 1118 is a broad-spectrum, liquid fungicide for use in water and solvent-based coatings, caulks, sealants, and wallcovering adhesives. The product has been specially formulated for improved emulsification in water. Busan® 1118 is composed of substan...view more Busan® 1118 is a broad-spectrum, liquid fungicide for use in water and solvent-based coatings, caulks, sealants, and wallcovering adhesives. The product has been specially formulated for improved emulsification in water. Busan® 1118 is composed of substances that have been allowed for use under 21 CFR § 176.300 of the U.S. Food and Drug Administration regulations. This product is used to protect the coating film against disfigurement and deterioration from fungal attack. For solvent- and water-based coatings, Busan® 1118 may be used at levels between 0.5% and 5.0%, based on total weight of the formula. Use levels will depend upon the resin system and the level of protection required. view less | |
| Busan® 1124 | Buckman Laboratories, Inc. | Busan® 1124 is a neutral pH, low odor, water-based formulation of the popular preservative "thione." It is effective in both acidic and alkaline systems, and does not possess the strong, pungent odor associated with caustic formulations of "thione." Busan...view more Busan® 1124 is a neutral pH, low odor, water-based formulation of the popular preservative "thione." It is effective in both acidic and alkaline systems, and does not possess the strong, pungent odor associated with caustic formulations of "thione." Busan® 1124 can be used for the preservation of clay slurries, adhesives, coatings, and high viscosity suspensions. This product is very effective in controlling growth of microorganisms that degrade additives and cause odors, spoilage, or loss of physical properties. view less | |
| Busan® 1130 | Buckman Laboratories, Inc. | Busan® 1130 is a nonmetal, nonformaldehyde contributing bactericide for use in water-based paints, adhesives, waxes, and polishes. The product is allowed for use under 21 CFR § 176.170 and 176.300 of the U.S. Food and Drug Administration regulations. Emul...view more Busan® 1130 is a nonmetal, nonformaldehyde contributing bactericide for use in water-based paints, adhesives, waxes, and polishes. The product is allowed for use under 21 CFR § 176.170 and 176.300 of the U.S. Food and Drug Administration regulations. Emulsion-based paints and adhesives are subject to bacterial deterioration in the container. Busan® 1130 has been specifically designed to provide protection against this type of bacterial attack. The product may be used at levels between 0.3%–1.5%, based on total weight of the emulsion. Testing is recommended to determine the level required to adequately protect the system. Introduce Busan® 1130 in the start-up water to ensure adequate dispersion. view less | |
| Busan® 1144 | Buckman Laboratories, Inc. | Busan® 1144 is a water-based formulation of 2-Bromo-2-nitropropane-1,3-diol. The product may be used for the control of bacterial and fungal growth in coatings, adhesives, and slurries. Busan® 1144 is particularly recommended for the preservation of starc...view more Busan® 1144 is a water-based formulation of 2-Bromo-2-nitropropane-1,3-diol. The product may be used for the control of bacterial and fungal growth in coatings, adhesives, and slurries. Busan® 1144 is particularly recommended for the preservation of starch, pigment and mineral slurries, adhesives, coatings, and other emulsion systems. This product is water soluble, effective in both acidic and alkaline systems, and relatively odorless. view less | |
| Busan® 1192 | Buckman Laboratories, Inc. | Busan® 1192 is a highly effective film preservative for use in water and solvent-based coatings. The extremely low water solubility ensures that Busan® 1192 stays in the paint film to provide long-term protection against disfigurement by fungi. Being a po...view more Busan® 1192 is a highly effective film preservative for use in water and solvent-based coatings. The extremely low water solubility ensures that Busan® 1192 stays in the paint film to provide long-term protection against disfigurement by fungi. Being a powder, Busan® 1192 should be added during the grind phase of the manufacturing process to ensure even distribution throughout the coating. This product may be used at levels between 0.25%–1.2%, based on total weight of the coating. Busan® 1192 is compatible with a wide range of coatings raw materials. However, it is recommended that the formulator conduct tests to ensure long-term compatibility and color stability in the particular formulation being used. view less | |
| Busan® 1192D | Buckman Laboratories, Inc. | Busan® 1192D is a highly effective film preservative dispersion for use in water-based coatings. An extremely low-water solubility helps ensure that Busan® 1192D stays in the paint film to provide long-term protection against disfigurement caused by fungi...view more Busan® 1192D is a highly effective film preservative dispersion for use in water-based coatings. An extremely low-water solubility helps ensure that Busan® 1192D stays in the paint film to provide long-term protection against disfigurement caused by fungi. This product is a 40% active aqueous dispersion of Busan® 1192. As a liquid, Busan® 1192D can be added during the grind or letdown phase of the manufacturing process. However, care should be taken to provide adequate agitation to ensure the product is evenly distributed throughout the coating. view less | |
| Busan® 1264 | Buckman Laboratories, Inc. | Busan® 1264 is a 19.8% aqueous solution of 1,2 benzoisothiazol-3(2H)-one. It effectively controls bacteria in water based products such as latex coatings, emulsions, latices, water-based slurries, photographic emulsions, metalworking and oil drilling flui...view more Busan® 1264 is a 19.8% aqueous solution of 1,2 benzoisothiazol-3(2H)-one. It effectively controls bacteria in water based products such as latex coatings, emulsions, latices, water-based slurries, photographic emulsions, metalworking and oil drilling fluids. Busan® 1264 is an effective preservative in most aqueous formulations. The product displays excellent compatibility and effectiveness over a wide pH range. Typical use levels range from 0.05%–0.25% based on the total weight of the composition or formulation. view less | |
| Busan® 1420 | Buckman Laboratories, Inc. | Busan® 1420 is a 20% active 3-iodo-2-propynyl-butyl carbamate (IPBC) with broad-spectrum fungicidal activity. Busan® 1420, used in solvent and waterborne paints and stains, will inhibit the growth of mildew. This product can be used as an additive to nonm...view more Busan® 1420 is a 20% active 3-iodo-2-propynyl-butyl carbamate (IPBC) with broad-spectrum fungicidal activity. Busan® 1420, used in solvent and waterborne paints and stains, will inhibit the growth of mildew. This product can be used as an additive to nonmedical, non food use natural and synthetic adhesive formulations and caulks to prevent the growth of fungal organisms in the material, both in the wet state and in the dry film of the finished product. It may be used in aqueous-based ink solutions for protection of these solutions against attack by fungal organisms. Busan® 1420 may also be used as a mildewcide in both aqueous- and solvent-based process formulations that coat cordage. view less | |
| Busan® 1440 | Buckman Laboratories, Inc. | Busan® 1440 is a 40% active, 3-iodo-2-propynyl-butyl carbamate (IPBC) with broad-spectrum fungicidal activity. Busan® 1440, used in solvent and waterborne paints and stains, will inhibit the growth of mildew. This product can be used as an additive to non...view more Busan® 1440 is a 40% active, 3-iodo-2-propynyl-butyl carbamate (IPBC) with broad-spectrum fungicidal activity. Busan® 1440, used in solvent and waterborne paints and stains, will inhibit the growth of mildew. This product can be used as an additive to nonmedical, non food use natural and synthetic adhesive formulations and caulks to prevent the growth of fungal organisms in the material, both in the wet state and in the dry film of the finished product. Busan® 1440 may be used in aqueous-based ink solutions for protection of these solutions against attack by fungal organisms. Finally, this product may be used to prevent surface mildew growth on plastic items, such as shower curtains, cable and wire insulation, and sun umbrellas. view less | |
| Busan® 1498 | Buckman Laboratories, Inc. | Busan® 1498 is a nonmetallic, 98%-active, 3-iodo-2-propynyl butyl carbamate (IPBC) off-white solid. It is a broad-spectrum fungicide for use in aqueous and solvent-based applications. Busan® 1498 inhibits the growth of mildew in solventbased paints and wa...view more Busan® 1498 is a nonmetallic, 98%-active, 3-iodo-2-propynyl butyl carbamate (IPBC) off-white solid. It is a broad-spectrum fungicide for use in aqueous and solvent-based applications. Busan® 1498 inhibits the growth of mildew in solventbased paints and waterborne paints, stains, and latex emulsions. It can be used as an additive to nonmedical, nonfood use natural and synthetic adhesives, caulks, patching compounds, sealants, grouts, and latexes, such as SBR/latex flooring adhesives, and carpet back ings to prevent the growth of fungi, molds, and mildews in the material, both in the wet state and in the dry film of the finished product. Busan® 1498 may also be used to prevent surface mildew growth on plastic items, such as shower curtains, cable and wire insulation, sun umbrellas, polymer furniture, filter medias, polymer components of carpet, etc. Intended plastics include polymers, such as PVC, polyurethanes, elastomers and rubbers, neoprene, styrene compounds, polyolefins, etc. view less | |
| Busan® 30WB | Buckman Laboratories, Inc. | Busan® 30WB is a microbicide concentrate that is used as a preservative for caulking-sealants and vinyl acetate wallcovering adhesives. Its addition to these products will inhibit the growth of fungi (mold, “mildew”) that often cause the discoloration, un...view more Busan® 30WB is a microbicide concentrate that is used as a preservative for caulking-sealants and vinyl acetate wallcovering adhesives. Its addition to these products will inhibit the growth of fungi (mold, “mildew”) that often cause the discoloration, unsightly appearance, and degradation of these compounds, particularly when they are exposed to humid environments. Busan® 30WB is especially recommended for the pro tec tion of caulking-sealants intended for use around bath tubs, showers, and bathroom tiles, and vinyl acetate adhesives used on fabrics and paper for covering walls. view less | |
| Busperse® 203 | Buckman Laboratories, Inc. | Busperse® 203 is an anionic dispersing agent composed of water-soluble polyelectrolytes and containing no phosphates or nitrilotriacetic acid (NTA). The product is used as a pigment dispersant in emulsion paints and pigment slurries. Busperse® 203 is comp...view more Busperse® 203 is an anionic dispersing agent composed of water-soluble polyelectrolytes and containing no phosphates or nitrilotriacetic acid (NTA). The product is used as a pigment dispersant in emulsion paints and pigment slurries. Busperse® 203 is composed of substances that have been allowed for use by the U.S. Food and Drug Administration regulations, CFR § 175.300 Resinous and polymeric coatings, and 175.105 Adhesives. Busperse® 203 can be dispensed directly from the shipping container. It is not necessary to dissolve or dilute the product prior to use. The product has a low foaming tendency and is effective over a wide pH range. view less | |
| Busperse® 2144 | Buckman Laboratories, Inc. | Busperse® 2144 is a proprietary, acrylate-based dispersant for use in water-based coatings, slurries, adhesives, and similarly formulated products. It has been found to be a noncorrosive, extremely effective anionic dispersant. This product is a clear, pa...view more Busperse® 2144 is a proprietary, acrylate-based dispersant for use in water-based coatings, slurries, adhesives, and similarly formulated products. It has been found to be a noncorrosive, extremely effective anionic dispersant. This product is a clear, pale-yellow liquid with an ammoniacal odor. view less | |
| Busperse® 2180 | Buckman Laboratories, Inc. | Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The...view more Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The product is generally nonionic at neutral to alkaline pH and slightly cationic at acidic pH. Busperse® 2180 disperses in aqueous systems with good agitation. It is not soluble in petroleum distillates, such as mineral spirits, toluene, xylene, aromatic 150, or VM&P naptha. The product is soluble in solvent systems that contain oxygenated solvents, such as glycols, glycol ethers, ketones, and acetates. view less | |
| Busperse® 2181 | Buckman Laboratories, Inc. | Busperse® 2181 is a patented surfactant used in coatings, stains, and clear finishes. It is a 30%-active, emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 8. The product i...view more Busperse® 2181 is a patented surfactant used in coatings, stains, and clear finishes. It is a 30%-active, emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 8. The product is generally nonionic at neutral to alkaline pH and slightly cationic at acidic pH. Busperse® 2181 disperses well in aqueous systems. It is not soluble in petroleum distillates, such as mineral spirits, toluene, xylene, aromatic 150, or VM&P naptha. The product is soluble in solvent systems that contain oxygenated solvents, such as glycols, glycol ethers, ketones, and acetates. view less | |
| Busperse® 229 | Buckman Laboratories, Inc. | Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better we...view more Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better wetting of the substrate by the binder, reducing moisture permeability of the paint film. This product should be added with water prior to the addition of wetting agents and pigments. The pigment slurry should be dispersed at high speed, cooled and let down with the water-reducible alkyd binder. view less | |
| Busperse® 275 | Buckman Laboratories, Inc. | Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 17...view more Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 173.310 of the U.S. Food and Drug Administration regulations. This product is a yellow-orange liquid, and it may be used in coatings at levels between 0.3% and 1.0%, based on total weight of the formulation. view less | |
| Busperse® 282 | Buckman Laboratories, Inc. | Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...view more Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. view less | |
| Busperse® 284 | Buckman Laboratories, Inc. | Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...view more Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. view less | |
| Busperse® 2848 | Buckman Laboratories, Inc. | Busperse® 2848 is a greener alternative to other dispersants since it is zero VOC, has FDA approval, and low odor. It is a unique lend of proprietary products that enables excellent dispersion properties, substrate wetting, and aids in anti-corrosive prop...view more Busperse® 2848 is a greener alternative to other dispersants since it is zero VOC, has FDA approval, and low odor. It is a unique lend of proprietary products that enables excellent dispersion properties, substrate wetting, and aids in anti-corrosive properties when used with reactive pigments. This product is recommended for pigment dispersing and improved blister resistance. view less | |
| Busperse® 39 | Buckman Laboratories, Inc. | Busperse® 39 is a high solids, anionic dispersant used in water-based paints and pigment slurries. It is effective at very low concentrations and does not require the use of additional dispersants or wetting agents during the pigment-grinding stage. Buspe...view more Busperse® 39 is a high solids, anionic dispersant used in water-based paints and pigment slurries. It is effective at very low concentrations and does not require the use of additional dispersants or wetting agents during the pigment-grinding stage. Busperse® 39 also provides excellent viscosity stability when using reactive pigments. It exhibits good color acceptance, is low foaming, and is not corrosive. Busperse® 39 has good compatibility with glycols and is therefore well-suited for use in gloss latex paint formulations. This product is a translucent, pale yellow liquid. view less | |
| Busperse® 47 | Buckman Laboratories, Inc. | Busperse® 47 is a 100% solids, zero VOC, nonionic dispersing aid, wetting aid and viscosity depressant that is compatible with a wide range of vehicles. Busperse® 47 has shown the ability to aid in dispersing difficult-to-grind pigments, such as organic r...view more Busperse® 47 is a 100% solids, zero VOC, nonionic dispersing aid, wetting aid and viscosity depressant that is compatible with a wide range of vehicles. Busperse® 47 has shown the ability to aid in dispersing difficult-to-grind pigments, such as organic reds, yellows, and oranges as well as various black pigments. The nonionic nature of Busperse® 47 makes it compatible in a wide range of coatings vehicles allowing for ease of formulation. This product can be dispersed directly into a variety of solvent-based polymers, such as conventional- and high-solids alkyds, polyesters, two-component epoxies, and urethanes. Busperse® 47 is soluble in many organic solvents, both polar and non polar. It should be added directly to the grind prior to the addition of the most difficult to grind pigment. view less | |
| Butrol® 22 | Buckman Laboratories, Inc. | Butrol® 22 is a nonlead, nonchrome corrosion inhibitive pigment for use in trade sales primers, industrial coatings, and heavy-duty maintenance coatings, as well as water-based systems, both emulsion and water-reducible alkyds, and solvent-based systems, ...view more Butrol® 22 is a nonlead, nonchrome corrosion inhibitive pigment for use in trade sales primers, industrial coatings, and heavy-duty maintenance coatings, as well as water-based systems, both emulsion and water-reducible alkyds, and solvent-based systems, such as conventional alkyds, urethanes, and epoxies. Because Butrol® 22 can be used across this full range of systems, it can replace several anticorrosive pigments, simplifying formulating and lowering inventory costs. This product is based on barium metaborate monohydrate and has been optimized for corrosion applications. view less | |
| Butrol® 334 | Buckman Laboratories, Inc. | Butrol® 334 is a corrosion inhibitor for flash rust control. It is compatible with a wide range of waterbased coatings, including acrylics, vinyl acrylics, and water-reducible alkyds. When used for in-can corrosion resistance in water-based coatings, Butr...view more Butrol® 334 is a corrosion inhibitor for flash rust control. It is compatible with a wide range of waterbased coatings, including acrylics, vinyl acrylics, and water-reducible alkyds. When used for in-can corrosion resistance in water-based coatings, Butrol® 334 is incorporated at levels of 0.2%–0.5%, based on the total weight of the coating. It will not migrate from the liquid coating into the head space of the containers. Thus, once the container is filled with the paint, it should be inverted to ensure that the paint comes into contact with all metal surfaces. When used in water-based coatings to control flash and early rusting, Butrol® 334 is effective at levels of 0.1%–1.0%, based on total formulation weight. view less | |
| Butrol® 9102 | Buckman Laboratories, Inc. | Butrol® 9102 is a nonlead, nonchrome, nonbarium corrosion-inhibitive pigment for use in coatings, caulks, sealants, and adhesives. It is an off-white, slightly soluble pigment. This clay-like powder may be used at levels between 1.5%–12%, based on total f...view more Butrol® 9102 is a nonlead, nonchrome, nonbarium corrosion-inhibitive pigment for use in coatings, caulks, sealants, and adhesives. It is an off-white, slightly soluble pigment. This clay-like powder may be used at levels between 1.5%–12%, based on total formula weight, to improve corrosion inhibition. Butrol® 9102 should be added to the grind portion of the formulation. view less | |
| Butrol® 9119 | Buckman Laboratories, Inc. | Butrol® 9119 is a calcium-based corrosion inhibitor for coatings. It is white in color and low in refractive index making it appropriate in clear and colored systems. This reactive pigment has shown excellent efficacy in both water- and solvent-thinned co...view more Butrol® 9119 is a calcium-based corrosion inhibitor for coatings. It is white in color and low in refractive index making it appropriate in clear and colored systems. This reactive pigment has shown excellent efficacy in both water- and solvent-thinned coatings. Butrol® 9119 has a low oil absorption and contains no barium, chromium, or lead. It also has a very small mean particle size. This makes Butrol® 9119 appropriate for applications where many corrosion inhibitors would be unusable. view less | |
| Butrol® 9140 | Buckman Laboratories, Inc. | Butrol® 9140 is a finely ground, multifunctional pigment based on barium metaborate monohydrate for use as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer in coatings. The product’s multifunctionality enables...view more Butrol® 9140 is a finely ground, multifunctional pigment based on barium metaborate monohydrate for use as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer in coatings. The product’s multifunctionality enables it to replace several products commonly formulated into coatings systems, thereby simplifying formulating. Because this pigment is ground to 1.5 microns, there is an increased surface area which can give equal or greater performance at lower use levels than other protective pigments. Butrol® 9140 is composed of substances approved for use under 21 CFR § 176.180 of the U.S. Food and Drug Administration regulations. view less | |
| Cinon™ FK | Arxada – Troy Corporation | Cinon™ FK fungicide is a highly-active alkaline fungicide based on sodium pyridinethione. It is stable over a wide temperature range and designed for the post-treatment of metal-working fluid systems. This product contains a biodegradable chelating agent,...view more Cinon™ FK fungicide is a highly-active alkaline fungicide based on sodium pyridinethione. It is stable over a wide temperature range and designed for the post-treatment of metal-working fluid systems. This product contains a biodegradable chelating agent, which provides protection against discoloration in the presence of FE(III). The microbicidal effect covers molds and yeasts, but also extends to gram-positive and gram-negative bacteria. view less | Request Sample |
| Cinon™ OI | Arxada – Troy Corporation | Cinon™ OI fungicide is a high-quality formulation of two fungicidal substances. The product contains no heavy metals, no aldehydes, and no phenols. It can be incorporated into both aqueous and solvent based products. The biocide is very effective against ...view more Cinon™ OI fungicide is a high-quality formulation of two fungicidal substances. The product contains no heavy metals, no aldehydes, and no phenols. It can be incorporated into both aqueous and solvent based products. The biocide is very effective against molds. Due to the lack of foam forming, Cinon™ OI is recommended for critical metalworking applications such as grinding emulsions. view less | Request Sample |
| Densil® ZOD | Arxada – Troy Corporation | Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-solubl...view more Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-soluble fungicide. Densil® ZOD also contains a supplemental algaecide for complete dry-film protection of the coating. view less | Request Sample |
| Fongal™ PZT 2 | Arxada – Troy Corporation | Fongal™ PZT 2 fungicide/algaecide is a modern fungicide/algaecide preparation based on terbutryn and zinc pyridinethione. It is especially suitable for the film protection of paints, coatings and plasters. Fongal™ PZT 2 fungicide/algaecide provides a high...view more Fongal™ PZT 2 fungicide/algaecide is a modern fungicide/algaecide preparation based on terbutryn and zinc pyridinethione. It is especially suitable for the film protection of paints, coatings and plasters. Fongal™ PZT 2 fungicide/algaecide provides a high performance against fungi and algae. view less | Request Sample |
| Fungitrol™ 10W | Arxada – Troy Corporation | Fungitrol™ 10W fungicide/algaecide is a preparation based on 2-octyl-2H-isothiazol-3-one (OIT) with diuron and carbendazim, especially suitable for dry-film protection of paints, putties and other wall coatings. Fungitrol™ 10W fungicide/algaecide provides...view more Fungitrol™ 10W fungicide/algaecide is a preparation based on 2-octyl-2H-isothiazol-3-one (OIT) with diuron and carbendazim, especially suitable for dry-film protection of paints, putties and other wall coatings. Fungitrol™ 10W fungicide/algaecide provides high performances against fungi and algae as well as a good leaching resistance. view less | Request Sample |
| Fungitrol™ 11 | Arxada – Troy Corporation | Fungitrol™ 11 is a powdered, low toxicity, non-metallic organic fungicide designed for use in non-aqueous coatings (paints) and caulking compounds. It demonstrates excellent performance in these substrates showing the following principal features: - Highl...view more Fungitrol™ 11 is a powdered, low toxicity, non-metallic organic fungicide designed for use in non-aqueous coatings (paints) and caulking compounds. It demonstrates excellent performance in these substrates showing the following principal features: - Highly effective against a variety of microorganisms. - Suitable for use in both exterior and interior non-aqueous paints and caulking compounds. - Does not affect color or other paint and caulking properties. view less | Request Sample |
| Fungitrol® 11E | Arxada – Troy Corporation | Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne ...view more Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne exterior paints and stains. view less | Request Sample |
| Fungitrol® 404-DS | Arxada – Troy Corporation | Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds,...view more Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds, and wood preservative stains. view less | Request Sample |
| Fungitrol™ 430S | Arxada – Troy Corporation | Fungitrol™ 430 fungicide offers broad protection against degradation, discoloration, and defacement caused by mold, mildew and algae. | Request Sample |
| Fungitrol® 720 | Arxada – Troy Corporation | Fungitrol® 720 is a fungicide that offers broad-spectrum protection against degradation, discoloration, and defacement caused by mold, mildew, and algae. | Request Sample |
| Fungitrol® 920 | Arxada – Troy Corporation | Fungitrol® 920 is a water-based dispersion of 20% IPBC (3-Iodo-2-Propynyl Butl Carbamate) which offers highly effective, broad-spectrum protection against degradation, discoloration, and defacement caused by mold and mildew. This product can be used in a...view more Fungitrol® 920 is a water-based dispersion of 20% IPBC (3-Iodo-2-Propynyl Butl Carbamate) which offers highly effective, broad-spectrum protection against degradation, discoloration, and defacement caused by mold and mildew. This product can be used in adhesives, inks, paints and stains, paper coatings, and wood preservation. view less | Request Sample |
| Fungitrol® 940G | Arxada – Troy Corporation | Fungitrol® 940G is a water-based dispersion of IPBC which offers highly effective, broad-spectrum protection against degradation, discoloration, and defacement caused by mold and mildew. It can be uesd in adhesives, inks, paints and stains, paper coatings...view more Fungitrol® 940G is a water-based dispersion of IPBC which offers highly effective, broad-spectrum protection against degradation, discoloration, and defacement caused by mold and mildew. It can be uesd in adhesives, inks, paints and stains, paper coatings, and wood preservation. view less | Request Sample |
| Fungitrol™ 960S | Arxada – Troy Corporation | Fungitrol™ 960S is a broad-spectrum fungicide that can be used in manufacturing and formulating mildew-resistant paints and stains. | Request Sample |
| MERGAL® 174II | Arxada – Troy Corporation | MERGAL® 174II is a liquid preservative used for the protection of water-based products against microbial spoilage in the wet state. The preservative is applicable at high pH and is compatible in many different systems. | Request Sample |
| MERGAL® 174IIP | Arxada – Troy Corporation | MERGAL® 174IIP is free-flowing, powdered, organic wet-state preservative designed for use in aqueous products which are subject to bacterial deterioration. | Request Sample |
| MERGAL® 186 | Arxada – Troy Corporation | MERGAL® 186 is a liquid, water-soluble organic preservative, designed for use in aqueous based systems that are subject to bacterial deterioration. | Request Sample |
| MERGAL® 192 | Arxada – Troy Corporation | MERGAL® 192 is a liquid, water-soluble organic preservative, designed for use in aqueous-based systems that are subject to bacterial deterioration. | Request Sample |
| MERGAL® 364 | Arxada – Troy Corporation | MERGAL® 364 is used in a variety of applications. Normal use levels range from 0.1%- 0.5% based on formula weight. MERGAL® 364 is designed primarily for applications for caulks, MERGAL® 364 should be added to the latter phase of the manufacturing process....view more MERGAL® 364 is used in a variety of applications. Normal use levels range from 0.1%- 0.5% based on formula weight. MERGAL® 364 is designed primarily for applications for caulks, MERGAL® 364 should be added to the latter phase of the manufacturing process. It should not be exposed to temperatures exceeding 125°F (52°C) for extended periods of time. view less | Request Sample |
| MERGAL® 395 | Arxada – Troy Corporation | MERGAL® 395 is a water-soluble bactericide on the basis of a hydantoin. The product shows excellent stability over a wide pH range, 3-10, also at elevated temperatures. | Request Sample |
| MERGAL® 399 | Arxada – Troy Corporation | MERGAL® 399 is a highly effective broad-spectrum liquid bacterial control agent designed for use in water-based systems. | Request Sample |
| MERGAL® 530 | Arxada – Troy Corporation | MERGAL® 530 is a broad-spectrum, quick-kill, fast-dissipating biocide that carries a low environmental impact. The non-oxidizing yet extremely rapid biocidal mechanism of this product makes it ideally suited for a wide variety of industrial applications. | Request Sample |
| MERGAL® 758 | Arxada – Troy Corporation | MERGAL® 758 is an aqueous broad-spectrum in-can preservative used to prevent deterioration and degradation caused by bacteria, fungi and yeast in aqueous systems. Is a free-flowing, VOC-free and formaldehyde-free dispersion product. Combines fast-acting p...view more MERGAL® 758 is an aqueous broad-spectrum in-can preservative used to prevent deterioration and degradation caused by bacteria, fungi and yeast in aqueous systems. Is a free-flowing, VOC-free and formaldehyde-free dispersion product. Combines fast-acting properties with long lasting protection. Designed specifically for the protection of paints and plasters or other aqueous systems where contamination is unpredictable, yet formaldehyde is not allowed. Also ideal for applications where a non-alkaline wet-state preservative is desired. view less | Request Sample |
| MERGAL® BIT 20 | Arxada – Troy Corporation | MERGAL® BIT 20 is an effective broad-spectrum liquid preservative designed to inhibit the growth of micro-organisms such as bacteria, yeast, and fungi in aqueous based formulations. | Request Sample |
| MERGAL® BIT20W | Arxada – Troy Corporation | MERGAL® BIT20W is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. It is a highly concentrated, free-flowing, aqueous, VOC-free dispersion product. | Request Sample |
| MERGAL® BIT20X | Arxada – Troy Corporation | MERGAL® BIT20X is an effective broad spectrum liquid preservative designed to inhibit the growth of micro-organisms such as bacteria and fungi in aqueous based formulations. Provides long term protection in oil-in water emulsions, lattices, emulsion paint...view more MERGAL® BIT20X is an effective broad spectrum liquid preservative designed to inhibit the growth of micro-organisms such as bacteria and fungi in aqueous based formulations. Provides long term protection in oil-in water emulsions, lattices, emulsion paints, water-based adhesives, casein and rosin dispersions, textile spin-finished solutions, pesticide formulations, aqueous slurries, and specialty and household products. view less | Request Sample |
| MERGAL® CM 1.5 | Arxada – Troy Corporation | MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra f...view more MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra filtrations units. It is suitable for systems with a pH of 3 - 9. view less | Request Sample |
| Mergal® GLT25 | Arxada – Troy Corporation | Mergal® GLT25 is a liquid preservative for the control of bacteria and fungi. The product is used in a wide variety of water-based applications. | Request Sample |
| Mergal® GLT50 | Arxada – Troy Corporation | Mergal® GLT50 is a liquid preservative that exhibits broad spectrum efficacy against bacteria and fungi. It is a highly concentrated product for use in a wide variety of water-based applications. The low use rates qualify Mergal® GLT50 as an ecologically ...view more Mergal® GLT50 is a liquid preservative that exhibits broad spectrum efficacy against bacteria and fungi. It is a highly concentrated product for use in a wide variety of water-based applications. The low use rates qualify Mergal® GLT50 as an ecologically responsible product technology ("green"). This product can be use in aqueous or water-containing products and systems, including industrial, institutional, and consumer in-can processes and products. view less | Request Sample |
| MERGAL® K10N | Arxada – Troy Corporation | MERGAL® K10N is an industrial BIT ( 1,2-benzisothiazoline-3-one) based preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems. MERGAL® K10N provides long-term wet-state (in-can) preservation. The product offer exc...view more MERGAL® K10N is an industrial BIT ( 1,2-benzisothiazoline-3-one) based preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems. MERGAL® K10N provides long-term wet-state (in-can) preservation. The product offer excellent stability and compatibility even with difficult formulations/systems. view less | Request Sample |
| MERGAL® K12N | Arxada – Troy Corporation | MERGAL® K12N is an effective, broad-spectrum liquid preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. The product is effective when used as a disinfectant or sanitizer for plants and equipment. | Request Sample |
| MERGAL® K14 | Arxada – Troy Corporation | MERGAL® K14 is an effective, broad-spectrum liquid preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. | Request Sample |
| MERGAL® WP45 | Arxada – Troy Corporation | MERGAL® WP45 is an effective preservative against a wide variety of fungal orgamisms (yeast, molt, staining fungi and mildew) and also contributes to limited control of bacteria. The primary application is protection of surface exposed to fungal spores, i...view more MERGAL® WP45 is an effective preservative against a wide variety of fungal orgamisms (yeast, molt, staining fungi and mildew) and also contributes to limited control of bacteria. The primary application is protection of surface exposed to fungal spores, in water- or solvent- based produts. MERGAL® WP45 can be used to protect against fungal growth on technical materials in both interior and exterior applcations. view less | Request Sample |
