1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...view more BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. view less | |
Bis-MPA™ | Perstorp | Bis-MPA™ is a dimethylolpropionic acid in the form of a white crystalline material. It is a key raw material in polyurethane dispersion for coatings. Bis-MPA™ can also be used in printing ink applications. | |
Boltorn™ P1000 | Perstorp | Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...view more Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. view less | |
Charmor™ DP15 | Perstorp | Charmor™ DP15 is a white super-micronized (particle size < 15 μm) dipentaerythritol derivative in powder form. Charmor™ DP15 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP15 is used as c...view more Charmor™ DP15 is a white super-micronized (particle size < 15 μm) dipentaerythritol derivative in powder form. Charmor™ DP15 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP15 is used as carbon source for halogen free systems demanding lower smoke release rate and non-toxic fumes. view less | |
Charmor™ DP40 | Perstorp | Charmor™ DP40 is a white micronized (particle size < 40 μm) dipentaerythritol derivative in powder form. Charmor™ DP40 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP40 is used as carbon ...view more Charmor™ DP40 is a white micronized (particle size < 40 μm) dipentaerythritol derivative in powder form. Charmor™ DP40 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | |
Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...view more Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | |
Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. view less | |
Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...view more Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. view less | |
Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. view less | |
Di-Penta 80 | Perstorp | Di-Penta 80 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly...view more Di-Penta 80 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly applications. It has a minimum di-pentaerythritol content of 80%. view less | |
Di-Penta 90 | Perstorp | Di-Penta 90 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly...view more Di-Penta 90 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly applications. It has a minimum di-pentaerythritol content of 90%. view less | |
Di-Penta 93 | Perstorp | Di-Penta 93 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly...view more Di-Penta 93 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly applications. It has a minimum di-pentaerythritol content of 92%. view less | |
Neopentyl Glycol 90 | Perstorp | Neopentyl Glycol 90 is a colorless, aqueous solution. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats. | |
Neopentyl Glycol Flakes | Perstorp | Neopentyl Glycol Flakes are a white, crystalline variation of Neopentyl Glycol. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats. | |
Neopentyl Glycol Molten | Perstorp | Neopentyl Glycol Molten is a variation of Neopentyl Glycol that is in liquid form at high temperatures. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats. | |
Oxymer™ HD112 | Perstorp | Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinker...view more Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. view less | |
Oxymer™ HD56 | Perstorp | Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers...view more Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. view less | |
Oxymer™ M112 | Perstorp | Oxymer™ M112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. Oxymer™ M112 has low surface energy ben...view more Oxymer™ M112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. Oxymer™ M112 has low surface energy beneficial for good wetting characteristics and provides a high hardness characteristic. view less | |
Pentaerythritol Mono | Perstorp | Pentaerythritol Mono is a white, crystalline polyhydric alcohol containing four primary hydroxyl groups. Applications include alkyd resins, radiation curing monomers, polyurethanes, rosin esters, and latex paints. | |
Phthalic Anhydride Molten | Perstorp | Phthalic Anhydride Molten is an important intermediate in the form of a colorless melt. It is used in many products including applications in the coatings industry. | |
Polyol PX | Perstorp | Polyol PX is a mixture of polyhydric alcohols. It is a solid amorphous material used as chemical building block and in liquid phenolic resins. | |
Polyol PX 70 | Perstorp | Polyol PX 70 Polyol PX 70 is a mixture of polyhydric alcohols. It is liquid solution with 70 % Polyol PX in water. Polyol PX is used as chemical building block and in liquid phenolic resins in paints, resins, and polishes. | |
Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...view more Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...view more Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
Ymer™ N120 | Perstorp | Ymer™ N120 is a polymeric, nonionic dispersing monomer chemical intermediate. This product is a white amorphous material used in waterborne resins systems, polyurethane dispersions, hydrophilic PU-systems, and surfactants. |