| Rovene® 4002 | Mallard Creek Polymers, Inc. | Rovene® 4002 is an anionic styrene-butadiene emulsion designed to have good freeze thaw stability and low odor characteristics. It is recommended for use in architectural coatings including flat wall paints and primer-sealers where low perm ratings are ne...view more Rovene® 4002 is an anionic styrene-butadiene emulsion designed to have good freeze thaw stability and low odor characteristics. It is recommended for use in architectural coatings including flat wall paints and primer-sealers where low perm ratings are needed (0.5 - 1.0 perms). view less | |
| Rovene® 4009 | Mallard Creek Polymers, Inc. | Rovene® 4009 is a carboxylated styrene-butadiene emulsion that exhibits an excellent balance of water resistance, grease and oil resistance, and low moisture vapor transmission. It can be compounded into highly water and grease resistant paper and board c...view more Rovene® 4009 is a carboxylated styrene-butadiene emulsion that exhibits an excellent balance of water resistance, grease and oil resistance, and low moisture vapor transmission. It can be compounded into highly water and grease resistant paper and board coatings. view less | |
| Rovene® 403 | Mallard Creek Polymers, Inc. | Rovene® 403 is an acrylic emulsion used as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars requiring low odor during application. Addition of 5 - 15% (d/d Portland cemen...view more Rovene® 403 is an acrylic emulsion used as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars requiring low odor during application. Addition of 5 - 15% (d/d Portland cement) improves flexibility, strength and water resistance. view less | |
| Rovene® 4076 | Mallard Creek Polymers, Inc. | Rovene® 4076 is recommended for use in architectural coatings interior primers for dry wall application where low perm ratings are required. Rovene® 4076 is a medium firm carboxylated styrene-butadiene emulsion designed to exhibit tight, continuous films ...view more Rovene® 4076 is recommended for use in architectural coatings interior primers for dry wall application where low perm ratings are required. Rovene® 4076 is a medium firm carboxylated styrene-butadiene emulsion designed to exhibit tight, continuous films providing the following performance advantages: moisture vapor barrier properties, superior cold temperature coalescence, and ASTM E-96 perm ratings of ~0.5. view less | |
| Rovene® 4176 | Mallard Creek Polymers, Inc. | Rovene® 4176 is a versatile polymer which can be used in formulating carpet laminating adhesives and flooring adhesives. Rovene® 4176 is a medium soft, carboxylated styrenebutadiene emulsion that can be used with a variety of fillers and additives to cust...view more Rovene® 4176 is a versatile polymer which can be used in formulating carpet laminating adhesives and flooring adhesives. Rovene® 4176 is a medium soft, carboxylated styrenebutadiene emulsion that can be used with a variety of fillers and additives to customize the desired application properties. The dry film exhibits excellent toughness and water resistance. Rovene® 4176 has found application use in carpet adhesives as well as cove base adhesives. view less | |
| Rovene® 4310 | Mallard Creek Polymers, Inc. | Rovene® 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. Its styrene content (45%) allows for the formulation of general purpose labels and construction adhesives ...view more Rovene® 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. Its styrene content (45%) allows for the formulation of general purpose labels and construction adhesives which provide excellent adhesion to a variety of substrates. Rovene® 4310 has compatibility with a wide variety of commercial tackifier resins and has excellent filler tolerance. view less | |
| Rovene® 4541 | Mallard Creek Polymers, Inc. | Rovene® 4541 is a carboxylated styrene-butadiene emulsion that has an outstanding strength and pigment binding properties. Rovene® 4541 provides good a good balance of dry & wet strength, capacity to accept high filler loading, block resistance, and adhes...view more Rovene® 4541 is a carboxylated styrene-butadiene emulsion that has an outstanding strength and pigment binding properties. Rovene® 4541 provides good a good balance of dry & wet strength, capacity to accept high filler loading, block resistance, and adhesion to multiple substrates including wood and metal. view less | |
| Rovene® 5044 | Mallard Creek Polymers, Inc. | Rovene® 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. Its relatively low molecular weight and styrene content (38%) allows formulation of permanent label and constructio...view more Rovene® 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. Its relatively low molecular weight and styrene content (38%) allows formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene® 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers. view less | |
| Rovene® 6018 | Mallard Creek Polymers, Inc. | Rovene® 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives. It provides excellent wet and dry adhesion to inorganic surfaces such as glass and cera...view more Rovene® 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives. It provides excellent wet and dry adhesion to inorganic surfaces such as glass and ceramics along with outstanding filler loading capacity for economical mastic adhesive formulations. view less | |
| Rovene® 6023 | Mallard Creek Polymers, Inc. | Rovene® 6023 is suggested as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars requiring low odor during application. Addition of 5 - 15% (d/d Portland cement) improves fl...view more Rovene® 6023 is suggested as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars requiring low odor during application. Addition of 5 - 15% (d/d Portland cement) improves flexibility, strength and water resistance. view less | |
| Rovene® 6026 | Mallard Creek Polymers, Inc. | Rovene® 6026 is a versatile polymer that can be used in multiple paint and coatings applications. It can be formulated for interior paints, outdoor landscaping coatings, or coatings for metal. | |
| Rovene® 6127 | Mallard Creek Polymers, Inc. | Rovene® 6127 is a clear drying, 100% acrylic, water resistant latex emulsion designed to provide protection for all types of concrete, cementitious and rigid surfaces. It is the ideal choice to beautify and provide protection to patios, sidewalks, drivewa...view more Rovene® 6127 is a clear drying, 100% acrylic, water resistant latex emulsion designed to provide protection for all types of concrete, cementitious and rigid surfaces. It is the ideal choice to beautify and provide protection to patios, sidewalks, driveways, decking, garage floors, basements and concrete walls. view less | |
| Rovene® 6523 | Mallard Creek Polymers, Inc. | Rovene® 6523 is a nonionic neutral pH carboxylated acrylic copolymer latex. It is an all acrylic latex designed for interior/exterior applications. |
