| AROLON® 845-W-45 | Polynt Composites | AROLON® 845-W-45, in the form of an opaque, white liquid, is a thermoplastic styrene acrylic emulsion designed for air-dry topcoats and primers, as well as coatings for metal and plastics. This product dries quickly, with good gasoline, chemical, solvent,...view more AROLON® 845-W-45, in the form of an opaque, white liquid, is a thermoplastic styrene acrylic emulsion designed for air-dry topcoats and primers, as well as coatings for metal and plastics. This product dries quickly, with good gasoline, chemical, solvent, corrosion, and water or humidity resistance. view less | |
| AROLON® 847-W-42 | Polynt Composites | AROLON® 847-W-42, in the form of a milky white, styrenated acrylic emulsion, is a resin that can be used in air-dry, force dry enamels, and baking topcoats for metals and plastics, primers, industrial maintenance direct-to-metal-coatings, and concrete cur...view more AROLON® 847-W-42, in the form of a milky white, styrenated acrylic emulsion, is a resin that can be used in air-dry, force dry enamels, and baking topcoats for metals and plastics, primers, industrial maintenance direct-to-metal-coatings, and concrete cures and sealers. This product offers water-sport resistance, chemical resistance, and good adhesion to concrete and metal. It can also offer good corrosion resistance with inhibitive pigment stability. view less | |
| AROLON® 860-W-45 | Polynt Composites | AROLON® 860-W-45, in the form of an opaque, white liquid, is an acrylic copolymer emulsion designed for primer and topcoat use on concrete and sealers, air-dry, force-dry, or baking primers for plastics and metals, and topcoats for plastics and metals. Th...view more AROLON® 860-W-45, in the form of an opaque, white liquid, is an acrylic copolymer emulsion designed for primer and topcoat use on concrete and sealers, air-dry, force-dry, or baking primers for plastics and metals, and topcoats for plastics and metals. This product is resistant to gasoline, chemicals, solvents, and stains after it has been cross-linked. view less | |
| AROPLAZ® 6749-XA6-90 | Polynt Composites | AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture a...view more AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture and equipment. view less | |
| BECKOSOL® 1272 | Polynt Composites | BECKOSOL® 1272 is a 100% solids, long-oil, soy alkyd that can be used in house paints (both conventional, as well as stain- and blister-resistant types), trim paints, structural steel primers, and lithographic or letterpress printing inks. It can also be ...view more BECKOSOL® 1272 is a 100% solids, long-oil, soy alkyd that can be used in house paints (both conventional, as well as stain- and blister-resistant types), trim paints, structural steel primers, and lithographic or letterpress printing inks. It can also be used as a modifier for exterior house paints. This product has good wetting properties and displays zinc oxide stability. It can readily be emulsified into latex paint formulations. view less | |
| BECKOSOL® 3758-M-85 | Polynt Composites | BECKOSOL® 3758-M-85, in the form of a clear liquid, is a phenolic-modified drying oil that can be used in direct production of coating vehicles without cooking, such as clear exterior finishes, aluminum paints, metal primers, coatings, and floor paints. I...view more BECKOSOL® 3758-M-85, in the form of a clear liquid, is a phenolic-modified drying oil that can be used in direct production of coating vehicles without cooking, such as clear exterior finishes, aluminum paints, metal primers, coatings, and floor paints. It can also be used to modify alkyd resins. If one mixes this product in a cold blend with resins, the end product will create an exterior coating system with high durability and chemical resistance. view less | |
| BECKOSOL® 6422-K3-75 | Polynt Composites | BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construct...view more BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construction equipment finishes, among other uses. This product dries tack-free in two hours and provides good color and color retention. It has strong water-spot, humidity, and salt spray resistance and will retain gloss in exterior exposures. view less | |
| FINE-CLAD® M-8911 | Polynt Composites | FINE-CLAD® M-8911, in the form of solid, clear granules, is a durable carboxyl polyester that can be used in exterior metals, outdoor furniture, architectural metals, and automotive trim applications. It is designed to cure by triglycidyl isocyanurate cro...view more FINE-CLAD® M-8911, in the form of solid, clear granules, is a durable carboxyl polyester that can be used in exterior metals, outdoor furniture, architectural metals, and automotive trim applications. It is designed to cure by triglycidyl isocyanurate cross-linkers for excellent weathering resistance. This product features exterior durability, good mechanical properties, good overbake properties, and good flowability. view less | |
| UROTUF® L63-W-38 | Polynt Composites | UROTUF® L63-W-38 is an anionic-stabilized, waterborne, aliphatic urethane polymer that can be used in wood and metal coatings, plastic and leather coatings, clear or pigmented coatings, and air-dry, force-cure, and baked coatings. This product features go...view more UROTUF® L63-W-38 is an anionic-stabilized, waterborne, aliphatic urethane polymer that can be used in wood and metal coatings, plastic and leather coatings, clear or pigmented coatings, and air-dry, force-cure, and baked coatings. This product features good chemical, solvent, and UV resistance with high hardness in a moderately flexible film. view less |
