| 1-Vinylimidazole, VIM | BASF Corporation, Chemical Intermediates | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF Corporation, Chemical Intermediates | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF Corporation, Chemical Intermediates | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF Corporation, Chemical Intermediates | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving pola...view more 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. view less | |
| 1,4-Butanediol, BDO | BASF Corporation, Chemical Intermediates | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF Corporation, Chemical Intermediates | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF Corporation, Chemical Intermediates | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF Corporation, Chemical Intermediates | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF Corporation, Chemical Intermediates | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF Corporation, Chemical Intermediates | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF Corporation, Chemical Intermediates | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF Corporation, Chemical Intermediates | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF Corporation, Chemical Intermediates | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF Corporation, Chemical Intermediates | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF Corporation, Chemical Intermediates | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| ACURE™ 500 | Allnex | ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...view more ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. view less | Request Sample |
| ACURE™ 510-100 | Allnex | ACURE™ 510-100 is a malonate functional polyester resin. | Request Sample |
| ACURE™ 510-170 | Allnex | ACURE™ 510-170 is a malonate functional polyester resin with succinimide. | Request Sample |
| ACURE™ 510-174 | Allnex | ACURE™ 510-174 is a malonate functional polyester resin with a CH equivalent weight of 119 g/eq (calculated on as-supplied product), for use as a donor resin in ACURE systems. Contains 1.5 +/- 0.05 % succinimide, calculated on solid binder. | Request Sample |
| ACURE™ 510-190 | Allnex | ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardnes...view more ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardness development coupled with excellent outdoor durability, high cross line densities, outstanding chemical resistance and improved SAG resistance on vertical surfaces. view less | Request Sample |
| ACURE™ 510-300 | Allnex | ACURE™ 510-300 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with excellent out...view more ACURE™ 510-300 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with excellent outdoor durability, high cross-link densities and outstanding chemical resistance. ACURE™ paints exhibit extremely fast dry times combined with long pot lives and tuneable open times. view less | Request Sample |
| ACURE™ 510-302 | Allnex | ACURE™ 510-302 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-302 feature fast development high hardness, excellent scratch/mar resista...view more ACURE™ 510-302 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-302 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling, high cross-link densities, excellent solvent resistance, low applied VOCs, and good outdoor durability. Acure™ paints exhibit extremely fast dry times with long pot lives and tuneable open times. view less | Request Sample |
| ACURE™ 510-370 | Allnex | ACURE™ 510-370 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with exce...view more ACURE™ 510-370 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with excellent outdoor durability, high cross-link densities and outstanding chemical resistance. view less | Request Sample |
| ACURE™ 510-372 | Allnex | ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/ma...view more ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling, high cross-link densities, excellent solvent resistance, low applied VOCs, and good outdoor durability. Acure™ paints exhibit extremely fast dry times with long pot lives and tuneable open times. Acure 510-372™ contains 1.4 – 1.5% succinimide, a kinetic additive, which increases pot-life and open time. view less | Request Sample |
| ACURE™ 510-400 | Allnex | ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionali...view more ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionality allows this reactive diluent to crosslink and react in to the polymer network and is used as a modifying donor resin in ACURE™ systems. view less | Request Sample |
| ACURE™ 550-100 | Allnex | ACURE™ 550-100 is an ACURE certified trimethylolpropane triacrylate. | Request Sample |
| ACURE™ 550-105 | Allnex | ACURE™ 550-105 is an ACURE certified ditrimethylolpropane tetraacrylate. | Request Sample |
| ACURE™ 550-200 | Allnex | ACURE™ 550-200 is an acid-free acrylic-based acrylate for use as part of the acceptor in ACURE technology paints. ACURE™ 550-200 is used in low amounts, 10% or less of the Acceptor. | Request Sample |
| ACURE™ 550-405 | Allnex | ACURE™ 550-405 is an aliphatic urethane acrylate with a high functionality and a low equivalent weight for use in ACURE paint formulations to enhance the adhesion performance. | Request Sample |
| ADDITOL® AQ-1680 | Allnex | ADDITOL® AQ 1680 - rheology additive - is an associative acrylic thickener soluble alkali for use in aqueous type mass systems. It has high thickening power, is compatible with acrylic and cellulosic thickeners, enables the formation of thick bodies witho...view more ADDITOL® AQ 1680 - rheology additive - is an associative acrylic thickener soluble alkali for use in aqueous type mass systems. It has high thickening power, is compatible with acrylic and cellulosic thickeners, enables the formation of thick bodies without syneresis, has great stability, and is a high-solids system. view less | Request Sample |
| ADDITOL® AQ-1681 | Allnex | ADDITOL® AQ 1681 - rheology additive - is an associative acrylic thickener, alkali-soluble, with medium thickening power for use in styrenated acrylic waterborne paints. It is recommended for use in paints, sealants, background preparers, varnishes and w...view more ADDITOL® AQ 1681 - rheology additive - is an associative acrylic thickener, alkali-soluble, with medium thickening power for use in styrenated acrylic waterborne paints. It is recommended for use in paints, sealants, background preparers, varnishes and waterproofing. view less | Request Sample |
| ADDITOL® BDK | Allnex | ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. ...view more ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® BDK undergoes a photochemical reaction that generates radicals. view less | Request Sample |
| ADDITOL® CPK | Allnex | ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to...view more ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® CPK undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. Suggested applications for ADDITOL® CPK include: paper upgrading, wood top-coats, hard-coats for plastics, overprint varnishes, vinyl flooring, metal coatings, exterior applications, general coating applications where low yellowing is critical, and inks and pigmented coatings (in combination with other photoinitiators). view less | Request Sample |
| ADDITOL® dry CF100 | Allnex | ADDITOL® dry CF100 - drier/dryer/siccative - is a ready to use, universal Cobalt replacement drier designed to have excellent compatibility and fast incorporation in all solvent borne and waterborne alkyd paints. It is based on twin accelerated Manganese. | Request Sample |
| ADDITOL® dry CF103 | Allnex | ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (W...view more ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (WB) oxidative drying systems. Allows leveling without strong wrinkling tendency. Solvent free, ultra low VOC, high flash point (FP) for high handling safety. Long lasting drying performance with strongly reduces loss of dry effect. view less | Request Sample |
| ADDITOL® dry CF200 | Allnex | ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 fo...view more ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 for all oxidative drying waterborne alkyd resin paints. view less | Request Sample |
| ADDITOL® dry CF300 | Allnex | ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all...view more ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all oxidative drying waterborne alkyd resin paints. view less | Request Sample |
| ADDITOL® E 04707 | Allnex | ADDITOL® E 04707 is a semi-crystalline polyester resin to be used as additive acting as polymeric flexibilizer for formulations based on superdurable polyurethanes. ADDITOL® E 04707 provides a higher degree of flexibility and mechanical resistance of coat...view more ADDITOL® E 04707 is a semi-crystalline polyester resin to be used as additive acting as polymeric flexibilizer for formulations based on superdurable polyurethanes. ADDITOL® E 04707 provides a higher degree of flexibility and mechanical resistance of coatings. view less | Request Sample |
| ADDITOL® P 791 | Allnex | ADDITOL® P 791 is a solid aliphatic polyanhydride hardener for use with solid acrylic resins containing glycidyl groups to manufacture powder coatings. The binder ratio is dependent on the equivalent weight of the glycidyl functional resin employed. | Request Sample |
| ADDITOL® P 824 | Allnex | ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is co...view more ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is compatible with nearly all powder coating systems. view less | Request Sample |
| ADDITOL® P 891 | Allnex | ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the m...view more ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow. view less | Request Sample |
| ADDITOL® P 896 | Allnex | ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formula...view more ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formulation is recommended to improve flow while maintaining good compatibility with nearly all powder coating systems. view less | Request Sample |
| ADDITOL® P 920 | Allnex | ADDITOL® P 920 is a catalyst masterbatch designed for create wrinkle finishes. It contains 5% active substance in a hydroxylated polyester matrix. Coatings made using this masterbatch in conjunction with CRYLCOAT® 2920-0 and a glycoluril crosslinker produ...view more ADDITOL® P 920 is a catalyst masterbatch designed for create wrinkle finishes. It contains 5% active substance in a hydroxylated polyester matrix. Coatings made using this masterbatch in conjunction with CRYLCOAT® 2920-0 and a glycoluril crosslinker produce a consistent wrinkle finish with good mechanical properties. view less | Request Sample |
| ADDITOL® P 932 | Allnex | ADDITOL® P 932 is an aliphatic urethane pre-polymer crosslinking agent for use with hydroxyl terminated polyester resins for the manufacture of polyurethane powder coatings. | Request Sample |
| ADDITOL® P 950 | Allnex | ADDITOL® P 950 is a tribo active masterbatch for use in hybrid, TGIC, polyurethane and TGIC alternative systems. ADDITOL® P 950 contains 5% active substance that greatly enhances the charging ability of powder coatings sprayed with a tribo powder spray gu...view more ADDITOL® P 950 is a tribo active masterbatch for use in hybrid, TGIC, polyurethane and TGIC alternative systems. ADDITOL® P 950 contains 5% active substance that greatly enhances the charging ability of powder coatings sprayed with a tribo powder spray gun. It is easily handled, greatly improves the dispersion of the additive in powder coatings and is designed for indoor or outdoor use. view less | Request Sample |
| ADDITOL® P 963 | Allnex | ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersio...view more ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations. view less | Request Sample |
| ADDITOL® P 964 | Allnex | ADDITOL® P 964 is a catalyst master batch designed for use in hybrid, TGIC or ARALDITE PT-910 systems. It contains 5% active substance and is designed for indoor or outdoor use. ADDITOL® P 964 is easily handled and greatly improves the dispersion of catal...view more ADDITOL® P 964 is a catalyst master batch designed for use in hybrid, TGIC or ARALDITE PT-910 systems. It contains 5% active substance and is designed for indoor or outdoor use. ADDITOL® P 964 is easily handled and greatly improves the dispersion of catalyst in powder coatings. view less | Request Sample |
| ADDITOL® P 965 | Allnex | ADDITOL® P 965 is an aromatic urethane adduct crosslinking agent for hydroxylated polyester resins for the manufacture of polyurethane powder coatings. | Request Sample |
| ADDITOL® P 966 | Allnex | ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in po...view more ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values. view less | Request Sample |
| ADDITOL® SXK 407 N | Allnex | ADDITOL® SXK 407 N is a catalyst for heat curing phenolic resins and combinations of phenolic- and epoxide resins. The addition of ADDITOL SXK 407 N also results in improved adhesion and resistance against sulphur staining. | Request Sample |
| ADDITOL® TPO | Allnex | ADDITOL® TPO is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to...view more ADDITOL® TPO is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® TPO undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. view less | Request Sample |
| ADDITOL® VXK 6365 | Allnex | ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to chec...view more ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to check compatibility and potlife. view less | Request Sample |
| ADDITOL® VXL 4930 N | Allnex | ADDITOL® VXL 4930 N -flow/leveling/levelling- is a modified silicone for improvement of levelling and surface smoothness of solvent containing and aqueous paints. | Request Sample |
| ADDITOL® VXL 4950 | Allnex | ADDITOL® VXL 4950 is an adhesion promoting primer for plastics. | Request Sample |
| ADDITOL® VXL 4992 | Allnex | ADDITOL® VXL 4992 serves as wetting and dispersing agent in high-body UP knifing fillers and glass fibre reinforced pigmented polyesters. It improves the pigment wetting, shortens the dispersion time, reduces the viscosity, enables the increase of the pig...view more ADDITOL® VXL 4992 serves as wetting and dispersing agent in high-body UP knifing fillers and glass fibre reinforced pigmented polyesters. It improves the pigment wetting, shortens the dispersion time, reduces the viscosity, enables the increase of the pigment and filler concentration, improves the air release, and has better levelling and flow properties of the ready product. view less | Request Sample |
| ADDITOL® VXL 6212 | Allnex | ADDITOL® VXL 6212 is a cationic, highly molecular resin-like wetting agent for inorganic and organic pigments. | Request Sample |
| ADDITOL® VXL 6237 N | Allnex | ADDITOL® VXL 6237 N is a cationic, highly molecular resin-like wetting and dispersing agent for inorganic and organic pigments. It improves the wetting of very difficult-to-disperse pigments, especially in aroma-free, solventborne, high-grade automotive s...view more ADDITOL® VXL 6237 N is a cationic, highly molecular resin-like wetting and dispersing agent for inorganic and organic pigments. It improves the wetting of very difficult-to-disperse pigments, especially in aroma-free, solventborne, high-grade automotive series, car repair, and industrial paints. This product also shorts the dispersing time, prevents the reflocculation of the pigments, and improves gloss and levelling. view less | Request Sample |
| ADDITOL® VXW 4926 | Allnex | ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions...view more ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions with water dilutable synthetic resins. view less | Request Sample |
| ADDITOL® VXW 4934 | Allnex | ADDITOL® VXW 4934 is an additive for water-dilutable paints for the prevention of pigment settling, for the improvement of edge crawling at dipping application and for increase of sagging limit at spray application. | Request Sample |
| ADDITOL® VXW 4940 N | Allnex | ADDITOL® VXW 4940 N is a lead-free combination drier, water-dilutable. It can be used as drier for all water-dilutable, oxidatively drying alkyd resin paints. It can also be used for acryl-alkyd hybrid systems. | Request Sample |
| ADDITOL® VXW 4971 | Allnex | ADDITOL® VXW 4971 is a leveling & substrate wetting additive for WB paints & coatings. | Request Sample |
| ADDITOL® VXW 4973 | Allnex | ADDITOL® VXW 4973 is a highly effective defoamer on mineral oil basis for foam prevention in plastic dispersions, emulsion paints, dispersion paints, dispersion adhesives and plastic renderings, without silicone addition. | Request Sample |
| ADDITOL® VXW 5907 | Allnex | ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varie...view more ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varies with the type of the water dilutable paint. view less | Request Sample |
| ADDITOL® VXW 6200 | Allnex | ADDITOL® VXW 6200 is a polymer anionic dispersing additive for gloss, silky-gloss and emulsion paints. | Request Sample |
| ADDITOL® VXW 6206 | Allnex | ADDITOL® VXW 6206 is an emulsified, nonylphenylethoxylate free combination drier of cobalt, lithium and zirconium. It may be added as siccative to all waterborne oxidatively drying alkyd resin paints, and is especially suitable for externally emulsified a...view more ADDITOL® VXW 6206 is an emulsified, nonylphenylethoxylate free combination drier of cobalt, lithium and zirconium. It may be added as siccative to all waterborne oxidatively drying alkyd resin paints, and is especially suitable for externally emulsified alkyd resin emulsions. view less | Request Sample |
| ADDITOL® VXW 6208 | Allnex | ADDITOL® VXW 6208 is a polymer non-ionic dispersing additive for grinding inorganic and organic pigments in water or in waterborne alkyd resin, acrylic, epoxy, and urethane emulsions. | Request Sample |
| ADDITOL® VXW 6208/60 | Allnex | ADDITOL® VXW 6208/60 is a polymeric non-ionic dispersing and wetting additive for solvent-borne, solvent-free and water-dilutable paint systems. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high‐...view more ADDITOL® VXW 6208/60 is a polymeric non-ionic dispersing and wetting additive for solvent-borne, solvent-free and water-dilutable paint systems. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high‐filled paint systems. This product is used for the production of binder‐free pigment pastes and for tinting base colors. ADDITOL® VXW 6208/60 is mainly applied as wetting agent in solvent‐free and solvent‐borne two pack‐epoxy‐systems. view less | Request Sample |
| ADDITOL® VXW 6210 N | Allnex | ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterb...view more ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterborne paint systems. This product is recommended for mainly low and medium-viscosity paints, such as gloss and silky gloss emulsions paints, and coatings for parquet floors and furniture on the basis of acrylate and acrylate/polyurethane emulsions. view less | Request Sample |
| ADDITOL® VXW 6211 | Allnex | ADDITOL® VXW 6211 is a defoamer for emulsion paints, especially for adhesives, which meets the requirements of the Federal Health Administration. | Request Sample |
| ADDITOL® VXW 6235 | Allnex | ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives...view more ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives. view less | Request Sample |
| ADDITOL® VXW 6252 | Allnex | ADDITOL® VXW 6252 is a curing component for cathodic precipitable acrylate binders. | Request Sample |
| ADDITOL® VXW 6360 | Allnex | ADDITOL® VXW 6360 is a polyurethane thickener for air-drying, aqueous coating systems. It has excellent rheologic properties, resulting in improved flow and leveling, film-build and brushability. | Request Sample |
| ADDITOL® VXW 6385 | Allnex | ADDITOL® VXW 6385 is a curing component for cathodic precipitable acrylate binders. It serves as a cross-linking component for acrylate binders for the production of dark colored as well as white or bright colored electro dipping paints by means of a tin ...view more ADDITOL® VXW 6385 is a curing component for cathodic precipitable acrylate binders. It serves as a cross-linking component for acrylate binders for the production of dark colored as well as white or bright colored electro dipping paints by means of a tin catalysis. view less | Request Sample |
| ADDITOL® VXW 6386 | Allnex | ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based...view more ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based on waterdilutable alkyd-resin, gloss- and semigloss dispersion paint. view less | Request Sample |
| ADDITOL® VXW 6387 | Allnex | ADDITOL® VXW 6387 is an electroneutral wetting and anti-settling agent, without addition of silicon. It is suggested for all waterborne, solvent based and solvent-free paint systems. | Request Sample |
| ADDITOL® VXW 6388 | Allnex | ADDITOL® VXW 6388 -rheology additive - is a polyurethane thickener for air-drying, aqueous coating systems. It is used for thickening and modification of flow properties of waterborne paints in the middle shear area e.g. gloss paints, dispersion paints an...view more ADDITOL® VXW 6388 -rheology additive - is a polyurethane thickener for air-drying, aqueous coating systems. It is used for thickening and modification of flow properties of waterborne paints in the middle shear area e.g. gloss paints, dispersion paints and anti-corrosive paints. view less | Request Sample |
| ADDITOL® VXW 6393 | Allnex | ADDITOL® VXW 6393 is a defoamer based on mineral spirits to prevent foam, without silicone addition. It was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. | Request Sample |
| ADDITOL® VXW 6394 | Allnex | ADDITOL® VXW 6394 is a wetting and dispersing agent for aqueous resin-free pigment concentrates. | Request Sample |
| ADDITOL® VXW 6396 | Allnex | ADDITOL® VXW 6396 is a flow and leveling agent for waterborne paint systems, without silicone addition. It's a fluorene modified acrylic resin copolymer, neutralized with amine, and improves leveling and substrate wetting. | Request Sample |
| ADDITOL® VXW 6503 N | Allnex | ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling wi...view more ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling without foam stabilisation. view less | Request Sample |
| ADDITOL® WT 100 DF-M | Allnex | ADDITOL® WT 100 DF-M is a water and waste water treatment defoamer. Mineral oil / wax – emulsion (50% active). For all WW treatment process stages. Highly compatible. Best cost – effective balance. | Request Sample |
| ADDITOL® WT 101 DF-S | Allnex | ADDITOL® WT 101 DF-S is a water and waste water treatment defoamer. Modified silicone defoamer emulsion (20% active). Emulsifier free technology. | Request Sample |
| ADDITOL® WT 102 DF-M | Allnex | ADDITOL® WT 102 DF-M is a water and waste water treatment defoamer. Highly refined mineral oil / wax defoamer (100% active). Improved foam lamella penetration for highly effective macro foam destruction. For all WW treatment process stages. | Request Sample |
| ADDITOL® WT 103 DF-S | Allnex | ADDITOL® WT 103 DF-S is a water and waste water treatment defoamer. Modified silicone / silica defoamer emulsion (25% active). Emulsifier free technology. For sophisticated & special treatments (zero liquid discharge plants, distillation & evaporation uni...view more ADDITOL® WT 103 DF-S is a water and waste water treatment defoamer. Modified silicone / silica defoamer emulsion (25% active). Emulsifier free technology. For sophisticated & special treatments (zero liquid discharge plants, distillation & evaporation units, membrane reactors). Highly effective at low dosages. view less | Request Sample |
| ADDITOL® XL 109/50LG | Allnex | ADDITOL® XL 109/50LG is a specific antioxidizing agent for oxidizing paint systems and inhibits or retards the crosslinking reactions initiated by air oxygen in the surface of paint films. | Request Sample |
| ADDITOL® XL 121 N | Allnex | ADDITOL® XL 121 N -flow/leveling/levelling- is a paint additive to enhance mar resistance and levelling of air drying and stoving paints, particularly for silicone modified air drying and stoving alkyd resins. | Request Sample |
| ADDITOL® XL 122 | Allnex | ADDITOL® XL 122 is a paint additive to enhance mar resistance and slip and to improve flow and levelling in air drying and stoving paints. | Request Sample |
| ADDITOL® XL 123 N | Allnex | Additol® XL 123 N is a flow agent and defoamer based on a modified silicone oil, for air drying and stoving coatings systems. | Request Sample |
