| 1-Vinylimidazole, VIM | BASF Corporation, Chemical Intermediates | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF Corporation, Chemical Intermediates | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF Corporation, Chemical Intermediates | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF Corporation, Chemical Intermediates | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving pola...view more 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. view less | |
| 1,4-Butanediol, BDO | BASF Corporation, Chemical Intermediates | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF Corporation, Chemical Intermediates | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF Corporation, Chemical Intermediates | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF Corporation, Chemical Intermediates | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF Corporation, Chemical Intermediates | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF Corporation, Chemical Intermediates | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF Corporation, Chemical Intermediates | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF Corporation, Chemical Intermediates | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF Corporation, Chemical Intermediates | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF Corporation, Chemical Intermediates | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF Corporation, Chemical Intermediates | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| Acclaim® Polyol 4200 | Covestro | Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elast...view more Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Acclaim® Polyol 4200 can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). view less | |
| Baxxodur™ EC 201 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF Corporation, Chemical Intermediates | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF Corporation, Chemical Intermediates | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Baybond® 140 AQ | Covestro | Baybond® 140 AQ has anionic dispersion of an aliphatic polyester urethane resin used as a film-building component in glass fiber sizings. Its polyurethane dispersion is suitable for use as a film-building component in glass fiber sizings. As with any prod...view more Baybond® 140 AQ has anionic dispersion of an aliphatic polyester urethane resin used as a film-building component in glass fiber sizings. Its polyurethane dispersion is suitable for use as a film-building component in glass fiber sizings. As with any product, use of Baybond® 140 AQ in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 130 | Covestro | Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...view more Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 330 | Covestro | Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. G...view more Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent filmforming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 401 A | Covestro | Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have ex...view more Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have excellent film-forming properties and very good adhesion. As with any product, use of Baybond® PU 401 A polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 402 A | Covestro | Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based o...view more Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 402 A are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. Baybond® PU 402 A is also very stable against shear forces. As with any product, use of Baybond® PU 402 A in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability view less | |
| Baybond® PU 403 | Covestro | Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond...view more Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond PU® 403 have excellent film-forming properties, and very good adhesion. The mechanical properties of Baybond® PU 403 are improved by post-curing at 150ºC or above for 30 minutes. As with any product, Baybond® PU 403 polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 405 | Covestro | Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers us...view more Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 405 have excellent filmforming properties, adhesion and colorfastness. This product is also highly resistant to the effects of shear forces and hydrolysis. Full mechanical properties of Baybond® PU 405 are developed by post-crosslinking for 20 minutes @ 170°C. As with any product, use of Baybond® PU 405 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 406 | Covestro | Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing. It is also useful for the sizing of glass fibers used to reinforce thermop...view more Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing. It is also useful for the sizing of glass fibers used to reinforce thermoplastics and has excellent film-forming properties and adhesion. Baybond® PU 406 also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 406 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| Baybond® XP 2728 | Covestro | Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber...view more Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XP 2728 are characterized by their outstanding film-forming properties and very good adhesion. Baybond® XP 2728 exhibits outstanding hydrolysis resistance and colorfastness, and is also very stable against shear forces. As with any product, use of Baybond® XP 2728 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Bayhydrol® A 2058 | Covestro | Bayhydrol® A 2058 is an aqueous hydroxyfunctional polyacrylic dispersion used in the formulation of flexible two-component polyurethane top coats and primers for plastics. | |
| Bayhydrol® A 2470 | Covestro | Bayhydrol® A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion used in waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates. | |
| Bayhydrol® A 2542 | Covestro | Bayhydrol® A 2542 is an aqueous hydroxy-functional polyacrylic dispersion. Can be used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50 g/l VOC containing topcoats for concrete flooring. | |
| Bayhydrol® A 2546 | Covestro | Bayhydrol® A 2546 is an anionic polyacrylate dispersion used as a binder for the formulation of water-reducible, two-component polyurethane coatings and sealers for mineral substrates and reactive resins (EP, PUR). | |
| Bayhydrol® A 2646 | Covestro | Bayhydrol® A 2646 is a hydroxy-functional acrylic- resin dispersed in water with approx. 1% co-solvent. Can be used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50 g/l VOC containing topcoats for concrete flooring...view more Bayhydrol® A 2646 is a hydroxy-functional acrylic- resin dispersed in water with approx. 1% co-solvent. Can be used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50 g/l VOC containing topcoats for concrete flooring. view less | |
| Bayhydrol® A 2695 | Covestro | Bayhydrol® A 2695 is an aqueous hydroxyfunctional polyacrylic dispersion that shows a superior chemical resistance. The resistance can be improved by increasing NCO/OH ratio. | |
| Bayhydrol® HD 2016 | Covestro | Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with othe...view more Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with other water-reducible binders. view less | |
| Bayhydrol® HD 2017 | Covestro | Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. | |
| Bayhydrol® PR 435 | Covestro | Bayhydrol® PR 435 is an aqueous aliphatic polyurethane dispersion that contains only 5% by weight of organic cosolvent. | |
| Bayhydrol® U 355 | Covestro | Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion used as a binder for the formulation of water-thinnable soft-feel coatings. | |
| Bayhydrol® U 475 | Covestro | Bayhydrol® U 475 is an aliphatic, hydroxyfunctional polyester polyurethane resin used as a binder for the formulation of water-thinnable soft-touch coatings. | |
| Bayhydrol® UH 240 | Covestro | Bayhydrol® UH 240 is an aliphatic anionic polyester polyurethane dispersion used as a combination binder in the formulation of highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for use on plastics. | |
| Bayhydrol® UH 2558 | Covestro | Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mm...view more Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH (1:3 in demineralised water) value of 7-9. The product is characterized by high resistance to yellowing, very good wet film transparency and very good abrasion resistance (taber), where the films are hard but flexible. Post-curing of such coatings with Bayhydur®, for example, brings additional significant advantages and results in waterborne two-component coatings with significantly higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. Compatibility with affordable PAC dispersions is good but must be tested on a case-by-case basis. view less | |
| Bayhydrol® UH 2593/1 | Covestro | Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) ...view more Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH (1:2.5in demineralised water) of 7-9. The product was developed specifically for the formulation of one- and two-component wood coating systems. It is characterized by very good wet film transparency, high hardness and good black heel mark resistance. Post-curing of such coatings with Bayhydur® 305 or Bayhydur® 3100, for example, brings additional significant advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener solution is generally 10:1. The product is also suitable for use in a wide range of applications thanks to the combination of good application properties and good compatibility with cost-effective PAC dispersions. view less | |
| Bayhydrol® UH 2606 | Covestro | Bayhydrol® UH 2606 is an aliphatic, anionic polyurethane dispersion containing polycarbonate used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. | |
| Bayhydrol® UH 2952/1 | Covestro | Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings...view more Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings. view less | |
| BAYHYDROL® UH XP 2660 | Covestro | An anionic aliphatic polyester-polyurethane dispersion. Used as a combination binder for the formulation of water-reducible soft-feel coatings. | |
| BAYHYDROL® UH XP 2719 | Covestro | An aliphatic, polyester-based, anionic polyurethane dispersion used as a binder for the formulation of water-reducible one and two-component coatings and sealers. | |
| Bayhydur® 302 | Covestro | Bayhydur® 302 is a solvent free, water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). Used as a crosslinking agent for two-component waterborne polyurethane coatings. | |
| Bayhydur® 303 | Covestro | Bayhydur® 303 is a solvent free, water-dispersible polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used as a crosslinking agent for hydroxyl-function waterborne resins. | |
| Bayhydur® 304 | Covestro | Bayhydur® 304 is a hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is primarily used as the crosslinker for aqueous polyol binders (Bayhydrol). | |
| Bayhydur® 305 | Covestro | Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is ...view more Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is a key requirement. view less | |
| Bayhydur® 401-70 | Covestro | Bayhydur® 401-70 is a water-dispersible polyisocyanate based on Isophorone Diisocyanate (IPDI) and dissolved in 1-methoxypropylacetate-2/xylene, 1:1. It is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol range. | |
| Bayhydur® BL 5335 | Covestro | Bayhydur® BL 5335 is water-dispersed blocked aliphatic polyisocyanate resin based on dicyclohexylmethane diisocyanate (H12MDI) dissolved in water/MPA/xylene, 56 : 4.5 : 4.5. Used as the hardener component for 1K-waterborne coatings. Bayhydur® BL 5335 is ...view more Bayhydur® BL 5335 is water-dispersed blocked aliphatic polyisocyanate resin based on dicyclohexylmethane diisocyanate (H12MDI) dissolved in water/MPA/xylene, 56 : 4.5 : 4.5. Used as the hardener component for 1K-waterborne coatings. Bayhydur® BL 5335 is used as a crosslinking agent for hydroxyl-functional water-borne resins view less | |
| Bayhydur® BL XP 2706 | Covestro | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...view more Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. view less | |
| Bayhydur® HD 2018 | Covestro | Bayhydur® HD 2018 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free, water-dispersible crosslinking agent for two-component waterborne polyurethane coatings. | |
| Bayhydur® XP 2487/1 | Covestro | Bayhydur® XP 2487/1 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. | |
| Bayhydur® XP 2547 | Covestro | Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins s...view more Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins such as Bayhydrol® XP 2542. view less | |
| Bayhydur® XP 2655 | Covestro | Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorpora...view more Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistances are required. view less | |
| Bayhydur® XP 2700 | Covestro | Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applica...view more Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. view less | |
| Bayhydur® XP 7165 | Covestro | Bayhydur® XP 7165 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free, water-dispersible crosslinking agent for two-component waterborne polyurethane coatings. | |
| Bayhytherm® 3146 | Covestro | Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. | |
| Baymedix® AP501 | Covestro | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
| Baymedix® AR602 | Covestro | Baymedix® AR602 is a polyether polyol based on a tetra-functional starter molecule. | |
| Baymedix® CD102 | Covestro | Baymedix® CD102 is an aqueous polyurethane dispersion. | |
| Baymedix® CD104 | Covestro | Baymedix® CD104 is an aqueous polyurethane dispersion. | |
| Baymedix® FD103 | Covestro | Baymedix® FD103 is an aqueous polyurethane dispersion. | |
| Baymedix® FP503 | Covestro | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| Benzylamine | BASF Corporation, Chemical Intermediates | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Butanediol divinyl ether | BASF Corporation, Chemical Intermediates | Butanediol divinyl ether is a colorless to yellow liquid, with a characteristic odor. It is soluble in water and with many organic solvents. Butanediol divinyl ether is used in the production of weather-resistant and radiation-curing paints. | |
| Capromer PD1 – 10 (PolyCLO NPG1000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. P...view more Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desire view less | |
| Capromer PD1 – 20 (PolyCLO NPG2000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. view less | |
| Capromer™ PD1–10 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4 – 05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1 – 05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Cyclohexyl vinyl ether, CHVE | BASF Corporation, Chemical Intermediates | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curta...view more Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curtain coating and adhesive cements. view less | |
| Desmodur® BL 3175A | Covestro | Desmodur® BL 3175A is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in aromatic 100. Used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relatively low...view more Desmodur® BL 3175A is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in aromatic 100. Used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 3175A blocked polyisocyanate are used for the industrial finishing of appliances, coil coating, and can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. view less | |
| Desmodur® BL 3272 MPA | Covestro | Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings w...view more Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings whose baking temperature can be reduced by the addition of a catalyst, e.g. 0.3 - 1.0 % DBTL, without influencing the storage stability of the ready-to-use formulation. view less | |
| Desmodur® BL 3370 MPA | Covestro | Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable o...view more Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 3370 MPA are used for the industrial finishing of appliances, coil coating, can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. view less | |
| Desmodur® BL 3475 BA/SN | Covestro | Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack bakin...view more Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings, especially for cans and tubes. The product can also be used as an additive to improve the reactivity, flexibility and adhesion of conventional baking systems. view less |
