| 1-Vinylimidazole, VIM | BASF Corporation, Chemical Intermediates | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF Corporation, Chemical Intermediates | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF Corporation, Chemical Intermediates | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF Corporation, Chemical Intermediates | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving pola...view more 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. view less | |
| 1,4-Butanediol, BDO | BASF Corporation, Chemical Intermediates | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF Corporation, Chemical Intermediates | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF Corporation, Chemical Intermediates | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF Corporation, Chemical Intermediates | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF Corporation, Chemical Intermediates | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF Corporation, Chemical Intermediates | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF Corporation, Chemical Intermediates | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF Corporation, Chemical Intermediates | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF Corporation, Chemical Intermediates | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF Corporation, Chemical Intermediates | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF Corporation, Chemical Intermediates | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| Baxxodur™ EC 201 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF Corporation, Chemical Intermediates | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF Corporation, Chemical Intermediates | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF Corporation, Chemical Intermediates | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Butanediol divinyl ether | BASF Corporation, Chemical Intermediates | Butanediol divinyl ether is a colorless to yellow liquid, with a characteristic odor. It is soluble in water and with many organic solvents. Butanediol divinyl ether is used in the production of weather-resistant and radiation-curing paints. | |
| Capromer PD1 – 10 (PolyCLO NPG1000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. P...view more Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desire view less | |
| Capromer PD1 – 20 (PolyCLO NPG2000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. view less | |
| Capromer™ PD1–10 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4 – 05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1 – 05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Cyclohexyl vinyl ether, CHVE | BASF Corporation, Chemical Intermediates | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF Corporation, Chemical Intermediates | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | |
| Diethanolamine, pure | BASF Corporation, Chemical Intermediates | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF Corporation, Chemical Intermediates | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...view more Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). view less | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF Corporation, Chemical Intermediates | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| Diisopropanolamine | BASF Corporation, Chemical Intermediates | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | |
| Dispex® Ultra PX 4575 | BASF Corporation, Chemical Intermediates | Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra ...view more Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. view less | |
| Epotec® RD 103 | Aditya Birla | Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination,...view more Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination, electronic encapsulation, and other industrial applications. view less | |
| Epotec® RD 104 | Aditya Birla | Epotec® RD 104 is a mono-functional, phenol-based glycidyl ether, primarily used for reducing the viscosity of conventional epoxy resins. This product is ideal for use in adhesives and casting, flooring, and construction applications. | |
| Epotec® RD 105 | Aditya Birla | Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity....view more Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity. This product is ideal for use in adhesives and flooring, casting, & construction coatings. view less | |
| Epotec® RD 106 | Aditya Birla | Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesive...view more Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesives, laminates, and flooring applications. view less | |
| Epotec® RD 107 | Aditya Birla | Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This prod...view more Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This product is ideal for use in structural adhesives, coatings, and filament winding, lamination, & electronic encapsulation applications. view less | |
| Epotec® RD 108 | Aditya Birla | Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal f...view more Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal for use in self-leveling flooring & screed applications, metal and concrete primers & coatings, and general purpose adhesives. view less | |
| Epotec® RD 109 | Aditya Birla | Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adh...view more Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adhesives. view less | |
| Epotec® RD 110 | Aditya Birla | Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, c...view more Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, coatings, and general purpose adhesives. view less | |
| Epotec® RD 111 | Aditya Birla | Epotec® RD 111 is a low viscosity, cyclo-aliphatic, di-functional epoxy reactive diluent based on cyclohexane dimethanol. It is designed primarily for use with high viscosity epoxy resins and offers improved UV resistance. This product is ideal for use in...view more Epotec® RD 111 is a low viscosity, cyclo-aliphatic, di-functional epoxy reactive diluent based on cyclohexane dimethanol. It is designed primarily for use with high viscosity epoxy resins and offers improved UV resistance. This product is ideal for use in coatings, civil applications, and electronic encapsulation. view less | |
| Epotec® RD 113 | Aditya Birla | Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is idea...view more Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is ideal for chemical resistant coatings, fast setting adhesives & sealants, tank linings, abrasion resistant castings, and encapsulation & other electronic applications. view less | |
| Epotec® RD 114LE | Aditya Birla | Epotec® RD 114LE is a diglycidyl ether of neopentyl glycol, designed primarily as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in coatings and adhesives. | |
| Epotec® RD 119LE | Aditya Birla | Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive c...view more Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive coatings & adhesives, tank linings, coil coatings, and flooring applications. view less | |
| Epotec® RD 121 | Aditya Birla | Epotec® RD 121 is a low color di-epoxide, based on dipropylene glycol, which improves flexibility and impact strength and increases elongation in cured systems. This product is ideal for use in adhesives and protective and marine coatings. | |
| Epotec® TH 7201 | Aditya Birla | Epotec® TH 7201 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It contributes to high chemical resistance - including outstanding resistance to strong oxidizing acids, many bases, chlorinated hydrocarbons, a...view more Epotec® TH 7201 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It contributes to high chemical resistance - including outstanding resistance to strong oxidizing acids, many bases, chlorinated hydrocarbons, and methanol-gasoline mixtures. This product is ideal for use in chemical resistant flooring applications, chemical resistant coatings & linings, and solvent-free coatings. view less | |
| Epotec® TH 7202 | Aditya Birla | Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This ...view more Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in fast setting adhesives and gel coats. view less | |
| Epotec® TH 7203 | Aditya Birla | Epotec® TH 7203 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It features good reactivity even at low temperatures, develops rapid physical and mechanical properties, and yields surfaces with good chemical ...view more Epotec® TH 7203 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It features good reactivity even at low temperatures, develops rapid physical and mechanical properties, and yields surfaces with good chemical resistance. This product is ideal for use in chemical resistant coatings, secondary containment linings, and industrial protective coatings. view less | |
| Epotec® TH 7207 | Aditya Birla | Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator fun...view more Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator functionality with other polyamine curing agents. This product is ideal for use in chemical resistant coatings and rapid setting adhesives. view less | |
| Epotec® TH 7210 | Aditya Birla | Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agent...view more Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in solvent-free coatings and fast setting adhesives. view less | |
| Epotec® TH 7211 | Aditya Birla | Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This prod...view more Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This product is ideal for use in high solids & solvent-free coatings, adhesives, and floor toppings. view less | |
| Epotec® TH 7212 | Aditya Birla | Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and hi...view more Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and high solids, low VOC, & solvent-free coatings. view less | |
| Epotec® TH 7301 | Aditya Birla | Epotec® TH 7301 is a low viscosity, low color, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, hig...view more Epotec® TH 7301 is a low viscosity, low color, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high solid coatings, self-leveling flooring applications, primers & screeds, transparent coatings, and chemical resistant linings. view less | |
| Epotec® TH 7302 | Aditya Birla | Epotec® TH 7302 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides good resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high soli...view more Epotec® TH 7302 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides good resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high solids coatings, primers & screeds, chemical resistant linings, and water proofing applications. view less | |
| Epotec® TH 7310 | Aditya Birla | Epotec® TH 7310 is a moderate viscosity, low color epoxy curing agent which, when cured with standard epoxy resin, provides surfaces with high gloss and resistance to various chemicals. This product is ideal for use in self-leveling floors & top coats, hi...view more Epotec® TH 7310 is a moderate viscosity, low color epoxy curing agent which, when cured with standard epoxy resin, provides surfaces with high gloss and resistance to various chemicals. This product is ideal for use in self-leveling floors & top coats, high solids & low VOC coatings, and clear or colored wood lacquers. view less | |
| Epotec® TH 7320 | Aditya Birla | Epotec® TH 7320 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. This product is ideal for use in solvent-free, high-filled self-leveling coatings, primers & screeds, transparent coatings, and c...view more Epotec® TH 7320 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. This product is ideal for use in solvent-free, high-filled self-leveling coatings, primers & screeds, transparent coatings, and chemical resistant linings. view less | |
| Epotec® TH 7901 | Aditya Birla | Epotec® TH 7901 is a low viscosity, modified, cycloaliphatic polyamine-based mannich base curing agent for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical res...view more Epotec® TH 7901 is a low viscosity, modified, cycloaliphatic polyamine-based mannich base curing agent for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical resistant high solids coatings, chemical resistant flooring coatings, and self-leveling floor toppings. view less | |
| Epotec® TH 7902 | Aditya Birla | Epotec® TH 7902 is a a low viscosity, modified, phenol-free, cycloaliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal...view more Epotec® TH 7902 is a a low viscosity, modified, phenol-free, cycloaliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical resistant high solids coatings, chemical resistant flooring coatings, and concrete primers & repair compounds. view less | |
| Epotec® TH 7903 | Aditya Birla | Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...view more Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. view less | |
| Epotec® TH 7905 | Aditya Birla | Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...view more Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. view less | |
| Epotec® TH 7940 | Aditya Birla | Epotec® TH 7940 is a phenalkamine curing agent designed for fast curing. Capable of curing at low temperatures and under high humidity conditions, it is also compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for u...view more Epotec® TH 7940 is a phenalkamine curing agent designed for fast curing. Capable of curing at low temperatures and under high humidity conditions, it is also compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based & high solids coatings, concrete floor coatings, pipe & tank linings, and anti-corrosive maintenance coatings. view less | |
| Epotec® TH 7940NB | Aditya Birla | Epotec® TH 7940NB is a phenalkamine curing agent in solvent, designed for a fast cure. It can be used with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based and high solids coatings, pipe and tank linings...view more Epotec® TH 7940NB is a phenalkamine curing agent in solvent, designed for a fast cure. It can be used with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based and high solids coatings, pipe and tank linings, concrete floor coatings, and anti-corrosive maintenance coatings. view less | |
| Epotec® TH 7941 | Aditya Birla | Epotec® TH 7941 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids co...view more Epotec® TH 7941 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids coatings, pipe & tank linings, and industrial, marine, & pipe coatings. view less | |
| Epotec® TH 7941S10 | Aditya Birla | Epotec® TH 7941S10 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids...view more Epotec® TH 7941S10 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids coatings, pipe & tank linings, and industrial maintenance, marine, & pipe coatings. view less | |
| Epotec® TH 7942 | Aditya Birla | Epotec® TH 7942 is a phenalkamine curing agent in solvent, designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-base...view more Epotec® TH 7942 is a phenalkamine curing agent in solvent, designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based & high solids coatings, concrete floor coatings, pipe & tank linings, and anti-corrosive maintenance coatings. view less | |
| Epotec® TH 7966 | Aditya Birla | Epotec® TH 7966 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids co...view more Epotec® TH 7966 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids coatings, pipe & tank linings, and industrial maintenance, marine, & pipe coatings. view less | |
| Epotec® TH 981 | Aditya Birla | Epotec® TH 981 is a solid phenolic hardener based on epoxy resin and bisphenol-A. This product is ideal for use in both decorative and functional powder coatings. | |
| Epotec® TH 982 | Aditya Birla | Epotec® TH 982 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator. This product is ideal for use in both decorative and functional powder coatings. | |
| Epotec® TH 983 | Aditya Birla | Epotec® TH 983 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator and flow modifier. This product is ideal for use in both decorative and protective powder coatings. | |
| Epotec® THW 4501 | Aditya Birla | Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveli...view more Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveling and trowelable flooring applications. view less | |
| Epotec® THW 4502 | Aditya Birla | Epotec® THW 4502 is a water-reducible, water-based, solvent-free epoxy curing agent featuring zero VOC formulation capability, good gloss appearance, and high hardness properties. This product is ideal for use in metal & concrete coatings, primers & seale...view more Epotec® THW 4502 is a water-reducible, water-based, solvent-free epoxy curing agent featuring zero VOC formulation capability, good gloss appearance, and high hardness properties. This product is ideal for use in metal & concrete coatings, primers & sealers for concrete floors, and general purpose maintenance coatings. view less | |
| Epotec® THW 4503 | Aditya Birla | Epotec® THW 4503 is a water-based, solvent-free epoxy curing agent featuring good hardness and compressive strength development, excellent adhesion, and zero voc formulation capability. This product is ideal for use in trowelable floor coatings and primer...view more Epotec® THW 4503 is a water-based, solvent-free epoxy curing agent featuring good hardness and compressive strength development, excellent adhesion, and zero voc formulation capability. This product is ideal for use in trowelable floor coatings and primers & sealers for concrete walls and floors. view less | |
| Epotec® THW 4504 | Aditya Birla | Epotec® THW 4504 is a water-based epoxy curing agent featuring excellent strength, water vapor permeability, and adhesion to damp surfaces, as well as VOC-free formulation capability. This product is ideal for use in coatings, primers, and sealers for sel...view more Epotec® THW 4504 is a water-based epoxy curing agent featuring excellent strength, water vapor permeability, and adhesion to damp surfaces, as well as VOC-free formulation capability. This product is ideal for use in coatings, primers, and sealers for self-leveling, trowelable, and concrete floors. view less | |
| Epotec® TW 5001 | Aditya Birla | Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. T...view more Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, and adhesives. view less | |
| Epotec® TW 5002 | Aditya Birla | Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improve...view more Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, adhesives, and textile binders. view less | |
| Epotec® TW 5003H | Aditya Birla | Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improv...view more Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in protective coatings for steel & concrete, adhesives, fiber sizing applications, and textile binders. view less | |
| Epotec® TW 5004 | Aditya Birla | Epotec® TW 5004 is an aqueous dispersion of standard Bisphenol F/A epoxy resin featuring moderate viscosity and 60% nonvolatile content. This product is well-suited for various applications in different temperature environments - including textile binders...view more Epotec® TW 5004 is an aqueous dispersion of standard Bisphenol F/A epoxy resin featuring moderate viscosity and 60% nonvolatile content. This product is well-suited for various applications in different temperature environments - including textile binders, coatings, and adhesives. view less | |
| Epotec® YD 010 S | Aditya Birla | Epotec® YD 010 S is a high molecular weight, unmodified, standard solid epoxy resin which displays excellent flexibility and good adhesion. This product is ideal for use in can coatings, tube & drum linings, and high performance primers. | |
| Epotec® YD 011X-75 | Aditya Birla | Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for us...view more Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for use in solvent-based anti-corrosive coatings, marine paints, industrial paints, adhesives, and laminates. view less | |
| Epotec® YD 012 X 75 | Aditya Birla | Epotec® YD 012 X 75 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved in xylene. This product is mainly used in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. |
