| 1-Vinylimidazole, VIM | BASF Corporation, Chemical Intermediates | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF Corporation, Chemical Intermediates | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF Corporation, Chemical Intermediates | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF Corporation, Chemical Intermediates | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving pola...view more 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. view less | |
| 1,4-Butanediol, BDO | BASF Corporation, Chemical Intermediates | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF Corporation, Chemical Intermediates | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF Corporation, Chemical Intermediates | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF Corporation, Chemical Intermediates | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF Corporation, Chemical Intermediates | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF Corporation, Chemical Intermediates | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF Corporation, Chemical Intermediates | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF Corporation, Chemical Intermediates | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF Corporation, Chemical Intermediates | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF Corporation, Chemical Intermediates | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF Corporation, Chemical Intermediates | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| Agrocer® Blue 153 | Clariant Plastics and Coatings (Pigments) | Agrocer® Blue 153 is an organic pigment in powder form with very high color strength and extraordinary fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations, especially when a ...view more Agrocer® Blue 153 is an organic pigment in powder form with very high color strength and extraordinary fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations, especially when a high solid content is desired, but also for the coloration of seed coating products. Agrocer® Blue 153 does not require any hazardous labeling. view less | Request Sample |
| Agrocer® Green 007 | Clariant Plastics and Coatings (Pigments) | Agrocer® Green 007 is an organic pigment in powder form with very high color strength and extraordinary fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations, especially when a...view more Agrocer® Green 007 is an organic pigment in powder form with very high color strength and extraordinary fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations, especially when a high solid content is desired, but also for the coloration of seed coating products. Agrocer® Green 007 does not require any hazardous labeling. view less | Request Sample |
| Agrocer® Red 112 | Clariant Plastics and Coatings (Pigments) | Agrocer® Red 112 is an organic pigment in powder form with very high color strength and very good fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations, especially when a high ...view more Agrocer® Red 112 is an organic pigment in powder form with very high color strength and very good fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations, especially when a high solid content is desired, but also for the coloration of seed coating products. In comparison to Pigment Red 48:2, Agrocer® Red 112 exhibits superior compatibility in pesticide formulations and seed coatings. The product does not require any hazardous labeling. view less | Request Sample |
| Agrocer® Red 482 | Clariant Plastics and Coatings (Pigments) | Agrocer® Red 482 is an organic pigment in powder form with high color strength and good fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations when a high solid content is desir...view more Agrocer® Red 482 is an organic pigment in powder form with high color strength and good fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations when a high solid content is desired, but also for the coloration of seed coating products. Agrocer® Red 482 does not require any hazardous labeling. view less | Request Sample |
| Agrocer® Violet 023 | Clariant Plastics and Coatings (Pigments) | Agrocer® Violet 023 is an organic pigment in powder form with very high color strength and extraordinary fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations, especially when ...view more Agrocer® Violet 023 is an organic pigment in powder form with very high color strength and extraordinary fastness that is recommended for the coloration of seeds. It is highly suitable for the use in seed treatment pesticide formulations, especially when a high solid content is desired, but also for the coloration of seed coating products. Agrocer® Violet 023 gives very attractive color shades and seeds a high-quality appearance. The product does not require any hazardous labeling. view less | Request Sample |
| Arrovide Red B 170 | Clariant Plastics and Coatings (Pigments) | Arrovide Red B 170 is a semi-opaque, blue shade PR 170 with moderate weather fastness characteristics. | Request Sample |
| Arrovide Yellow G 074 | Clariant Plastics and Coatings (Pigments) | Arrovide Yellow G 074 is a bright, green shade PY 74 with moderate weather fastness characteristics. | Request Sample |
| Baxxodur™ EC 201 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF Corporation, Chemical Intermediates | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF Corporation, Chemical Intermediates | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF Corporation, Chemical Intermediates | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Butanediol divinyl ether | BASF Corporation, Chemical Intermediates | Butanediol divinyl ether is a colorless to yellow liquid, with a characteristic odor. It is soluble in water and with many organic solvents. Butanediol divinyl ether is used in the production of weather-resistant and radiation-curing paints. | |
| Capromer PD1 – 10 (PolyCLO NPG1000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. P...view more Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desire view less | |
| Capromer PD1 – 20 (PolyCLO NPG2000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. view less | |
| Capromer™ PD1–10 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4 – 05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1 – 05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Carbon Black A-148-D-MX | Clariant Plastics and Coatings (Pigments) | Carbon Black A-148-D-MX is a furnace process PBk 7 laked with aluminum benzoate to impart flocculation resistance in solvent-based coatings. It is primarily used in automotive systems, where small quantities are used to desaturate shades and thereby allow...view more Carbon Black A-148-D-MX is a furnace process PBk 7 laked with aluminum benzoate to impart flocculation resistance in solvent-based coatings. It is primarily used in automotive systems, where small quantities are used to desaturate shades and thereby allow more precise color control. As a result of high transparency, the grade may also be formulated into both metallic and pearlescent finishes. In general industrial and coil coatings, this flocculation-resistant pigment can be employed as a tinting black. view less | Request Sample |
| Cyclohexyl vinyl ether, CHVE | BASF Corporation, Chemical Intermediates | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Dalamar® Yellow YT-717-D - Pigment Yellow 74 | Clariant Plastics and Coatings (Pigments) | Dalamar® Yellow YT-717-D is in the series of high strength, green shade yellows that are broadly used in trade sales paints for interior application and in some industrial coatings. Such pigments demonstrate good rheological properties but fastness to ove...view more Dalamar® Yellow YT-717-D is in the series of high strength, green shade yellows that are broadly used in trade sales paints for interior application and in some industrial coatings. Such pigments demonstrate good rheological properties but fastness to overpainting and all non-aliphatic solvents is poor. In addition, they bloom heavily in baking systems and have relatively poor heat stability. To note is that they often exhibit poor crystal stability in the presence of nonaliphatic organic solvents, indicated by a distinct red shade shift, loss of brightness and strength reduction. This phenomenon is often accelerated by elevated (above 40°C/104°F) processing temperatures due to aggressive milling. They are primarily suitable for waterbased and air-drying paints. view less | Request Sample |
| Dalamar® Yellow YT-800-D-MX - Pigment Yellow 65 | Clariant Plastics and Coatings (Pigments) | Dalamar® Yellow YT-800-D is a bright, reddish PY 65 type having very good weather fastness and high opacity in application. It is primarily used in solvent-based yellow traffic paints (Cowles Blade dispersible) and tapes. Pigments of this chemistry demons...view more Dalamar® Yellow YT-800-D is a bright, reddish PY 65 type having very good weather fastness and high opacity in application. It is primarily used in solvent-based yellow traffic paints (Cowles Blade dispersible) and tapes. Pigments of this chemistry demonstrate good rheological properties but fastness to overpainting and all non-aliphatic solvents is poor. In addition, they bloom heavily in baking systems and have relatively poor heat stability. To note is that they often exhibit poor crystal stability in the presence of organic solvents, indicated by a distinct red shade shift, loss of brightness and strength reduction. This phenomenon is often accelerated by elevated (above 40°C/104°F) processing temperatures. view less | Request Sample |
| Dalamar® Yellow YT-805-D - Pigment Yellow 65 | Clariant Plastics and Coatings (Pigments) | Dalamar® Yellow YT-805-D is a bright, reddish PY 65 type having very good weather fastness and high opacity in application. It is primarily used in water-based yellow traffic paints (Cowles Blade dispersible) and tapes. Pigments of this chemistry demonstr...view more Dalamar® Yellow YT-805-D is a bright, reddish PY 65 type having very good weather fastness and high opacity in application. It is primarily used in water-based yellow traffic paints (Cowles Blade dispersible) and tapes. Pigments of this chemistry demonstrate good rheological properties but fastness to overpainting and all non-aliphatic solvents is poor. In addition, they bloom heavily in baking systems and have relatively poor heat stability. To note is that they often exhibit poor crystal stability in the presence of organic solvents, indicated by a distinct red shade shift, loss of brightness and strength reduction. This phenomenon is often accelerated by elevated (above 40°C/104°F) processing temperatures. view less | Request Sample |
| Dalamar® Yellow YT-818-D - Pigment Yellow 74 | Clariant Plastics and Coatings (Pigments) | Dalamar® Yellow YT-818-D is in the series of opaque PY 74 types. These medium shade, exterior grade yellow pigments offer better opacity and weather fastness than the green shade, interior grades. They have good to very good light and weather fastness, an...view more Dalamar® Yellow YT-818-D is in the series of opaque PY 74 types. These medium shade, exterior grade yellow pigments offer better opacity and weather fastness than the green shade, interior grades. They have good to very good light and weather fastness, and when compared to other chemistries are relatively lower in cost. The pigments demonstrate good rheological properties but fastness to overpainting and all nonaliphatic solvents is poor. In addition, they bloom heavily in baking systems and have relatively poor heat stability. To note is that they often exhibit poor crystal stability in the presence of non-aliphatic organic solvents, indicated by a distinct red shade shift, loss of brightness and strength reduction. This phenomenon is often accelerated by elevated (above 40°C/104°F) processing temperatures due to aggressive milling (exception: Hansa Brilliant Yellow 2GX 70-S). They are primarily suitable for waterbased and air-drying paints. view less | Request Sample |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF Corporation, Chemical Intermediates | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | |
| Diethanolamine, pure | BASF Corporation, Chemical Intermediates | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF Corporation, Chemical Intermediates | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...view more Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). view less | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF Corporation, Chemical Intermediates | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| Diisopropanolamine | BASF Corporation, Chemical Intermediates | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | |
| Dispex® Ultra PX 4575 | BASF Corporation, Chemical Intermediates | Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra ...view more Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. view less | |
| epsilon-Caprolactone, CLO | BASF Corporation, Chemical Intermediates | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...view more Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. view less | |
| Ethylene diamine | BASF Corporation, Chemical Intermediates | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF Corporation, Chemical Intermediates | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Formic acid | BASF Corporation, Chemical Intermediates | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| Graphtol Bordeax HF3R - Pigment Violet 32 | Clariant Plastics and Coatings (Pigments) | Graphtol Bordeax HF3R is a brilliant bordeaux pigment with high colour strength, good lightfastness and excellent dielectric properties. Particularly suitable for films, cable cheathing and as a replacement for thioindigo pigments. | Request Sample |
| Graphtol Carmine HF3C - Pigment Red 176 | Clariant Plastics and Coatings (Pigments) | Graphtol Carmine HF3C is a highly transparent blue shade red with good fastness properties. Suitable for cable sheathing and spin-dyeing applications. | Request Sample |
| Graphtol Carmine HF4C - Pigment Red 185 | Clariant Plastics and Coatings (Pigments) | Graphtol Carmine HF4C is a bluish red pigment with good fastness properties. It is recommended for PVC, PE film, and cable applications. | Request Sample |
| Graphtol Fire Red 3RLP - Pigment Red 48:3 | Clariant Plastics and Coatings (Pigments) | Graphtol Fire Red 3RLP is an eonomical bluish red pigment with excellent dispersibility. It is suitable for the mass coloration of films and PP fibres, also recommended for cable applications, injection, and blow moulding. | Request Sample |
| Graphtol Orange RL - Pigment Orange 34 | Clariant Plastics and Coatings (Pigments) | Graphtol Orange RL is a pure and brilliant orange pigment with excellent dielectric properties. It is not recommended for processing temperatures about 200 degress Celsius. | Request Sample |
| Graphtol Red F3RK 70 - Pigment Red 170 | Clariant Plastics and Coatings (Pigments) | Graphtol Red F3RK 70 is a very strong and brilliant mid-shade red pigment with good light fastness properties and good heat stability in polyolefins. | Request Sample |
| Graphtol Red HFG - Pigment Orange 38 | Clariant Plastics and Coatings (Pigments) | Graphtol Red HFG is a yellowish red pigment with good fastness properties. In combination with PV Fast Yellow HR 02 or PV Fast Yellow HGR, it is possible to match brilliant orange color shades with good light fastness. | Request Sample |
| Graphtol Red LG - Pigment Red 53:1 | Clariant Plastics and Coatings (Pigments) | Graphtol Red LG is an economical yellow shade red pigment with high heat stability and good colour strength. It is suitable for the coloration of consumer goods, food packaging and toys, and not recommended in applications where good light fastness is req...view more Graphtol Red LG is an economical yellow shade red pigment with high heat stability and good colour strength. It is suitable for the coloration of consumer goods, food packaging and toys, and not recommended in applications where good light fastness is required. view less | Request Sample |
| Graphtol Red P2B - Pigment Red 48:2 | Clariant Plastics and Coatings (Pigments) | Graphtol Red P2B is a bluish red pigment exhibiting high color strength, good dispersibility and fastness properties. A highly economical pigment suitable for injection moulding, extrusion, film blowing and PP fibre applications. | Request Sample |
| Graphtol Yellow 3GP - Pigment Yellow 155 | Clariant Plastics and Coatings (Pigments) | Graphtol Yellow 3GP is an economical greenish yellow pigment with reasonable fastness properties. It is suitable for PP fibers, packaging, and toy applications and an ideal replacement for diarylide and lead chromate pigments. | Request Sample |
| Graphtol Yellow GR - Pigment Yellow 13 | Clariant Plastics and Coatings (Pigments) | Graphtol Yellow GR is a very strong and economical classical yellow pigment with excellent dielectric properties. It is not recommended for processing temperatures above 200 degrees Celsius. | Request Sample |
| Graphtol Yellow H2R - Pigment Yellow 139 | Clariant Plastics and Coatings (Pigments) | Graphtol Yellow H2R is a red shade yellow pigment with high color strength. It can be used as a replacement for diarylide and lead chromate pigments. Its potential reaction with alkaline additives can lead to discoloration and a reduction in properties. I...view more Graphtol Yellow H2R is a red shade yellow pigment with high color strength. It can be used as a replacement for diarylide and lead chromate pigments. Its potential reaction with alkaline additives can lead to discoloration and a reduction in properties. It is recommended for PP fiber applications. view less | Request Sample |
| Hansa Brilliant Yellow 2GX 70 - Pigment Yellow 74 | Clariant Plastics and Coatings (Pigments) | Hansa Brilliant Yellow 2GX 70 is a yellow pigment with good fastness to light and weathering for air-drying paints. Very good hiding power as an organic pigment. As it has good rheological properties, it can be used even at high pigment concentrations (ab...view more Hansa Brilliant Yellow 2GX 70 is a yellow pigment with good fastness to light and weathering for air-drying paints. Very good hiding power as an organic pigment. As it has good rheological properties, it can be used even at high pigment concentrations (about 20 % relative to solid binder) without any effect on gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. Not suitable for stoving enamels because of the high risk of blooming. view less | Request Sample |
| Hansa Brilliant Yellow 2GX 70 - S - EDW - Pigment Yellow 74 | Clariant Plastics and Coatings (Pigments) | Hansa Brilliant Yellow 2GX 70S - EDW is a yellow pigment with good fastness to light and weathering for air-drying paints. Very good hiding power as an organic pigment. As it has good rheological properties, it can be used even at high pigment concentrati...view more Hansa Brilliant Yellow 2GX 70S - EDW is a yellow pigment with good fastness to light and weathering for air-drying paints. Very good hiding power as an organic pigment. As it has good rheological properties, it can be used even at high pigment concentrations (about 20 % relative to solid binder) without any effect on gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. This pigment has been stabilized to recrystallization thus the production of pigment concentrates is much more reliable and their shelf-life is better. Pigment is not suitable for stoving enamels because of the high risk of blooming. view less | Request Sample |
| Hansa Brilliant Yellow 2GX 70 - S - Pigment Yellow 74 | Clariant Plastics and Coatings (Pigments) | Hansa Brilliant Yellow 2GX 70 - S is a yellow pigment with good fastness to light and weathering for air-drying paints. Very good hiding power as an organic pigment. As it has good rheological properties, it can be used even at high pigment concentrations...view more Hansa Brilliant Yellow 2GX 70 - S is a yellow pigment with good fastness to light and weathering for air-drying paints. Very good hiding power as an organic pigment. As it has good rheological properties, it can be used even at high pigment concentrations (about 20 % relative to solid binder) without any effect on gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. This pigment has been stabilized to recrystallization thus the production of pigment concentrates is much more reliable and their shelf-life is better. Pigment is not suitable for stoving enamels because of the high risk of blooming. view less | Request Sample |
| Hansa Brilliant Yellow 4GX - Pigment Yellow 73 | Clariant Plastics and Coatings (Pigments) | Hansa Brilliant Yellow 4GX is a green shade monoazo pigment. The shade is similar to Pigment Yellow 1 but with higher transparency and good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packagin...view more Hansa Brilliant Yellow 4GX is a green shade monoazo pigment. The shade is similar to Pigment Yellow 1 but with higher transparency and good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. view less | Request Sample |
| Hansa Brilliant Yellow 5GX - Pigment Yellow 74 | Clariant Plastics and Coatings (Pigments) | Hansa Brilliant Yellow 5GX 03 is a very strong, green shade monoazo yellow. The shade is similar to Pigment Yellow 1, but with higher colour strength, transparency and gloss. It also exhibits good light- and weather fastness properties. Recommended for pa...view more Hansa Brilliant Yellow 5GX 03 is a very strong, green shade monoazo yellow. The shade is similar to Pigment Yellow 1, but with higher colour strength, transparency and gloss. It also exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. view less | Request Sample |
| Hansa Brilliant Yellow 5GX 03 - Pigment Yellow 74 | Clariant Plastics and Coatings (Pigments) | Hansa Brilliant Yellow 5GX 03 is a very strong, green shade monoazo yellow. The shade is similar to Pigment Yellow 1, but with higher colour strength, transparency and gloss. It also exhibits good light- and weather fastness properties. Recommended for pa...view more Hansa Brilliant Yellow 5GX 03 is a very strong, green shade monoazo yellow. The shade is similar to Pigment Yellow 1, but with higher colour strength, transparency and gloss. It also exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. view less | Request Sample |
| Hansa Red 3B - Pigment Red 3 | Clariant Plastics and Coatings (Pigments) | Hansa Red 3B is a very blue shade opaque beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water-based packaging gravure and flexographic printing...view more Hansa Red 3B is a very blue shade opaque beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water-based packaging gravure and flexographic printing inks. view less | Request Sample |
| Hansa Red B - Pigment Red 3 | Clariant Plastics and Coatings (Pigments) | Hansa Red B is a blue shade opaque beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water-based packaging gravure and flexographic printing inks. | Request Sample |
| Hansa Red GG - Pigment Orange 5 | Clariant Plastics and Coatings (Pigments) | Hansa Red GG is an opaque, yellow shade beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing ...view more Hansa Red GG is an opaque, yellow shade beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. view less | Request Sample |
| Hansa Scarlet RNC - Pigment Red 3 | Clariant Plastics and Coatings (Pigments) | Hansa Scarlet RNC is a blue shade opaque beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing...view more Hansa Scarlet RNC is a blue shade opaque beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. view less | Request Sample |
| Hansa Yellow 10G - Pigment Yellow 3 | Clariant Plastics and Coatings (Pigments) | Hansa Yellow 10G is a pigment with good fastness to light and weathering for air-drying paints. Because of its pure greenish shade it is particularly suitable for green mixtures. Owing to the high risk of blooming, it is not suitable for stoving enamels. | Request Sample |
| Hansa Yellow G 02 - Pigment Yellow 1 | Clariant Plastics and Coatings (Pigments) | Hansa Yellow G 02 is a strong, opaque monoazo pigment. It exhibits good light- and weather fastness properties, is easy to disperse and has good stability to recrystalization. Recommended for paste inks as well as for solvent- and water-based packaging gr...view more Hansa Yellow G 02 is a strong, opaque monoazo pigment. It exhibits good light- and weather fastness properties, is easy to disperse and has good stability to recrystalization. Recommended for paste inks as well as for solvent- and water-based packaging gravure and flexographic printing inks. view less | Request Sample |
| Hansa Yellow X-MX - Pigment Yellow 75 | Clariant Plastics and Coatings (Pigments) | Hansa Yellow X-MX offers a reddish hue, good weather fastness and easy dispersing characteristics, this pigment is commonly used for the formulation of yellow highway marking paints (Cowles Blade dispersible). This pigment demonstrates good rheological pr...view more Hansa Yellow X-MX offers a reddish hue, good weather fastness and easy dispersing characteristics, this pigment is commonly used for the formulation of yellow highway marking paints (Cowles Blade dispersible). This pigment demonstrates good rheological properties, but fastness to overpainting and all non-aliphatic solvents is poor. In addition, it blooms heavily in baking systems and has relatively poor heat stability. view less | Request Sample |
| HNDA | BASF Corporation, Chemical Intermediates | HNDA (2,6-naphthalene dicarboxylic acid) is a key co-monomer for the production of polyester powder coatings as a bisphenol A replacement. As a component in film coatings, HNDA increases heat deflection temperature, lowers gas permeability, and improves ...view more HNDA (2,6-naphthalene dicarboxylic acid) is a key co-monomer for the production of polyester powder coatings as a bisphenol A replacement. As a component in film coatings, HNDA increases heat deflection temperature, lowers gas permeability, and improves UV resistance. view less | |
| Hostaperm Blue A4R - Pigment Blue 15:1 | Clariant Plastics and Coatings (Pigments) | Hostaperm Blue A4R is a reddish blue pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. In shade it is distinctly redder and slightly purer than Hostaperm Blue A2R. | Request Sample |
| Hostaperm Blue B2G - EDS - Pigment Blue 15:3 | Clariant Plastics and Coatings (Pigments) | Hostaperm Blue B2G - EDS is an easily dispersible (called ED) version of Hostaperm Blue B2G for solvent-borne coating systems. These pigments are surface modified with a highly efficient and widely compatible dispersing additive; hence they can also be di...view more Hostaperm Blue B2G - EDS is an easily dispersible (called ED) version of Hostaperm Blue B2G for solvent-borne coating systems. These pigments are surface modified with a highly efficient and widely compatible dispersing additive; hence they can also be dispersed with a dissolver, provided that their mill bases have been suitably formulated. The dispersion of ED pigments does not require additional dispersant as they already contain the optimal amount of additive for the modification of their surfaces. The coloristic properties of Hostaperm Blue B2G-EDS VP 3491 can differ from those of the conventional pigment as a result of their improved ease-of-dispersion. view less | Request Sample |
| Hostaperm Blue B2G - Pigment Blue 15:3 | Clariant Plastics and Coatings (Pigments) | Hostaperm Blue B2G is a greenish, blue pigment stable to aromatic solvents with the outstanding fastness of this group of pigments. | Request Sample |
| Hostaperm Blue BT-617-D - Pigment Blue 15:4 | Clariant Plastics and Coatings (Pigments) | Hostaperm Blue BT-617-D is a greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Host...view more Hostaperm Blue BT-617-D is a greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. view less | Request Sample |
| Hostaperm Blue BT-627-D - Pigment Blue 15:2 | Clariant Plastics and Coatings (Pigments) | Hostaperm Blue BT-627-D is a greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Host...view more Hostaperm Blue BT-627-D is a greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. Can be used in solid colors and in metallic colors in a very wide range of concentrations. view less | Request Sample |
| Hostaperm Blue BT-728-D Pigment Blue 15:1 | Clariant Plastics and Coatings (Pigments) | Hostaperm Blue BT-728-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-728-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, ...view more Hostaperm Blue BT-728-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-728-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, which is not achievable with any other phthalocyanine blue grades. view less | Request Sample |
