| 1-Vinylimidazole, VIM | BASF Corporation, Chemical Intermediates | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF Corporation, Chemical Intermediates | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF Corporation, Chemical Intermediates | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF Corporation, Chemical Intermediates | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving pola...view more 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. view less | |
| 1,4-Butanediol, BDO | BASF Corporation, Chemical Intermediates | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF Corporation, Chemical Intermediates | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF Corporation, Chemical Intermediates | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF Corporation, Chemical Intermediates | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF Corporation, Chemical Intermediates | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF Corporation, Chemical Intermediates | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF Corporation, Chemical Intermediates | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF Corporation, Chemical Intermediates | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF Corporation, Chemical Intermediates | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF Corporation, Chemical Intermediates | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF Corporation, Chemical Intermediates | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 680 Blown Soybean Oil | Cargill Industrial Specialties | 680 Blown Soybean Oil is a specifically oxidized oil that is used in paints, caulking and glazing compounds, printing inks, and mold release applications. Its widespread availability and low cost make soybean oil an ideal component for developing renewabl...view more 680 Blown Soybean Oil is a specifically oxidized oil that is used in paints, caulking and glazing compounds, printing inks, and mold release applications. Its widespread availability and low cost make soybean oil an ideal component for developing renewable, bio-based products. view less | |
| Agri-Pure® 290A | Cargill Industrial Specialties | Agri-Pure® 290A is a polyol ester specially developed for industrial lubrication applications. Its unique fatty acid composition provides natural and extended product stability. Agri-Pure® 290A has excellent lubricity. Agri-Pure® 290A has been used to rep...view more Agri-Pure® 290A is a polyol ester specially developed for industrial lubrication applications. Its unique fatty acid composition provides natural and extended product stability. Agri-Pure® 290A has excellent lubricity. Agri-Pure® 290A has been used to replace petroleum oils, esters, and animal fats in steel rolling and other industrial formula. view less | |
| Agri-Pure® 300 | Cargill Industrial Specialties | Agri-Pure® 300 is a high-oleic based polyol ester offering both temperature stability and high-performance lubricity. It is made from renewable resources. Agri-Pure® 300 applications can include, lubricant, fire resistant hydraulic fluids, metalworking...view more Agri-Pure® 300 is a high-oleic based polyol ester offering both temperature stability and high-performance lubricity. It is made from renewable resources. Agri-Pure® 300 applications can include, lubricant, fire resistant hydraulic fluids, metalworking fluids, steel-aluminum rolling oils, drawing and ironing lubricants. view less | |
| Agri-Pure® 310 | Cargill Industrial Specialties | Agri-Pure® 310 is a high-oleic based polyol ester offering both temperature stability and high-performance lubricity. It is made from renewable resources. Agri-Pure® 310 applications include, lubricant, fire resistant hydraulic fluids, metalworking flu...view more Agri-Pure® 310 is a high-oleic based polyol ester offering both temperature stability and high-performance lubricity. It is made from renewable resources. Agri-Pure® 310 applications include, lubricant, fire resistant hydraulic fluids, metalworking fluids, steel-aluminum rolling oils, drawing and ironing lubricants. view less | |
| Agri-Pure® 330 | Cargill Industrial Specialties | Agri-Pure® 330 is a high-oleic based polyol ester offering both temperature stability and high-performance lubricity. It is made from renewable resources. Agri-Pure® 330 applications may include, lubricant, fire resistant hydraulic fluids, metalworking...view more Agri-Pure® 330 is a high-oleic based polyol ester offering both temperature stability and high-performance lubricity. It is made from renewable resources. Agri-Pure® 330 applications may include, lubricant, fire resistant hydraulic fluids, metalworking fluids, steel-aluminum rolling oils, drawing and ironing lubricants view less | |
| Agri-Pure® 458 | Cargill Industrial Specialties | Agri-Pure® 458 oil is a trimethylpropane ester. This high performance polyol ester is designed to give both high and low temperature lubrication. It is made from renewable resources. Agri-Pure® 458 applications include hydraulic fluid, fire resistant h...view more Agri-Pure® 458 oil is a trimethylpropane ester. This high performance polyol ester is designed to give both high and low temperature lubrication. It is made from renewable resources. Agri-Pure® 458 applications include hydraulic fluid, fire resistant hydraulic fluid, steel rolling oil, aluminum rolling oil, drawing/stamping lubricants, metalworking fluids, and similar applications. view less | |
| Agri-Pure® 560 | Cargill Industrial Specialties | Agri-Pure® 560 oil product is a high performance, synthetic, polyol ester base oil. Its unique chemistry offers excellent oxidative and thermal stability, and outstanding low temperature. Agri-Pure® 560 applications may include, hydraulic fluid, fire r...view more Agri-Pure® 560 oil product is a high performance, synthetic, polyol ester base oil. Its unique chemistry offers excellent oxidative and thermal stability, and outstanding low temperature. Agri-Pure® 560 applications may include, hydraulic fluid, fire resistant hydraulic fluid, metalworking fluids and similar applications. view less | |
| Agri-Pure® 60 | Cargill Industrial Specialties | Agri-Pure® 60 is a canola oil specially developed for medium duty metalworking lubrication needs. It is made from renewable resources. Agri-Pure® 60 applications can include, lubricant, steel rolling oil, aluminum rolling oil, pigment dispersion and si...view more Agri-Pure® 60 is a canola oil specially developed for medium duty metalworking lubrication needs. It is made from renewable resources. Agri-Pure® 60 applications can include, lubricant, steel rolling oil, aluminum rolling oil, pigment dispersion and similar applications. view less | |
| Agri-Pure® 75 | Cargill Industrial Specialties | Agri-Pure® 75 is a high oleic vegetable oil especially developed for biodegradable lubricant applications. Its unique fatty acid composition provides natural lubrication and extended product stability. Agri-Pure® 75 offers superior oxidation stability com...view more Agri-Pure® 75 is a high oleic vegetable oil especially developed for biodegradable lubricant applications. Its unique fatty acid composition provides natural lubrication and extended product stability. Agri-Pure® 75 offers superior oxidation stability compared to other types of vegetable oils such as soybean oil. Agri-Pure® 75 may be used to replace mineral oils, esters, and/or animal fats in metalworking or hydraulic oil formulations. Agri-Pure® 75 has been approved for use as a H-1 basestock for formulating food grade lubricants. view less | |
| Agri-Pure Gold™ 414 | Cargill Industrial Specialties | Agri-Pure Gold™ 414 is a low cost alternative to vegetable and petroleum basefluids in a variety of industrial applications where renewable sources and biodegradability are desired. Agri-Pure Gold™ 414 is a technical grade, non-food grade, vegetable oil. ...view more Agri-Pure Gold™ 414 is a low cost alternative to vegetable and petroleum basefluids in a variety of industrial applications where renewable sources and biodegradability are desired. Agri-Pure Gold™ 414 is a technical grade, non-food grade, vegetable oil. It offers formulators unique opportunities to reduce costs without sacrificing performance in many applications. It contains natural free fatty acids to aid emulsification in a variety of industrial applications, reducing the need for costly synthetic emulsifiers. Agri-Pure Gold™ 414 applications may include, coatings, inks, metalworking lubricants, rolling oils, biodegradable spray oils/dedusting, adjuvants, diluents, biodegradable greases, concrete form release. view less | |
| Agri-Pure Gold™ 45 | Cargill Industrial Specialties | Agri-Pure Gold™ 45 is a biodegradable vegetable oil used to replace mineral oil and esters. Agri-Pure Gold™ 45 applications can include, biodiesel, mineral oils, esters replacement, and other similar applications. | |
| Agri-Pure Gold™ 500 Blown | Cargill Industrial Specialties | Agri-Pure Gold™ 500 Blown is a blown vegetable oil used to replace petroleum oils and esters for biodegradable applications. Agri-Pure Gold™ 500 applications may include, lubricant, crop protection, petroleum oils, ester replacement, and similar applic...view more Agri-Pure Gold™ 500 Blown is a blown vegetable oil used to replace petroleum oils and esters for biodegradable applications. Agri-Pure Gold™ 500 applications may include, lubricant, crop protection, petroleum oils, ester replacement, and similar applications. view less | |
| Agri-Pure® Gold 63-S Blown | Cargill Industrial Specialties | Agri-Pure Gold® 63S oil is a low acid viscosity modified vegetable oil. Agri-Pure® Gold 63-S Blown applications may include, lubricant, metal working, de-dusting fluid, steel rolling oil, aluminum rolling oil, hydraulic fluid, and similar application. | |
| Alkali Refined Soybean Oil | Cargill Industrial Specialties | Alkali Refined Soybean Oil is a technical grade of refined, bleached, and deodorized soybean oil. Ideal for applications such as paints, varnishes, alkyd resins, carriers, inks, pharmaceutical manufacturing, and similar applications. | |
| Altor™ 200 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 200 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. The formulation is designed to be tough but flexible, lightfast and for highly reactive two-component polyurethane spray coatings. | |
| Altor™ 201 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 201 polyaspartic ester is a low-color, solvent-free amine-functional reactive partner for polyisocyanates. This low viscosity amine functional resin was developed for use in the formulation of high solids two-component polyurethane-urea coatings. | |
| Altor™ 202 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 202 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. This was product was designed for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. | |
| Altor™ 205 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as wel...view more Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as well as stain, scratch, and mar resistance. This product is recommended for concrete coatings, primed steel coatings, exterior railcar coatings, clean room coatings, institutional coatings, and windmill coatings. view less | |
| ASTM Raw Linseed Oil | Cargill Industrial Specialties | ASTM Raw Linseed Oil is a degummed and filtered linseed oil. ASTM Raw Linseed Oil is ideal for stains, resins, diluents, inks, hardboard production and similar applications. | |
| B-Tough™ A1 | Cargill Industrial Specialties | B-Tough™ A1 is an epoxy functionalised toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. | |
| B-Tough™ A2 | Cargill Industrial Specialties | B-Tough™ A2 is an epoxy functional toughening agent for structural resins and adhesives. It brings excellent impact resistance, stability, low moisture diffusion, and easy handling. It is recommended for use in liquid and/or solid type epoxy systems (low ...view more B-Tough™ A2 is an epoxy functional toughening agent for structural resins and adhesives. It brings excellent impact resistance, stability, low moisture diffusion, and easy handling. It is recommended for use in liquid and/or solid type epoxy systems (low polarity grade). view less | |
| B-Tough™ A3 | Cargill Industrial Specialties | B-Tough™ A3 is an epoxy functionalised toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. | |
| B-Tough™ C2r | Cargill Industrial Specialties | B-Tough™ C2r is a VOC free epoxy functional toughening agent which allows formulating zero VOC epoxy coatings for e.g. indoor floor coatings. This liquid and easy to use toughening agent provides excellent impact and crack resistance preventing surface ma...view more B-Tough™ C2r is a VOC free epoxy functional toughening agent which allows formulating zero VOC epoxy coatings for e.g. indoor floor coatings. This liquid and easy to use toughening agent provides excellent impact and crack resistance preventing surface marring for optimal protection. Furthermore, B-Tough™ C2r offers improved flexibility whilst maintaining hardness and enhanced durability to extend product lifetime. view less | |
| Baxxodur™ EC 201 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF Corporation, Chemical Intermediates | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF Corporation, Chemical Intermediates | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF Corporation, Chemical Intermediates | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Butanediol divinyl ether | BASF Corporation, Chemical Intermediates | Butanediol divinyl ether is a colorless to yellow liquid, with a characteristic odor. It is soluble in water and with many organic solvents. Butanediol divinyl ether is used in the production of weather-resistant and radiation-curing paints. | |
| Capromer PD1 – 10 (PolyCLO NPG1000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. P...view more Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desire view less | |
| Capromer PD1 – 20 (PolyCLO NPG2000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. view less | |
| Capromer™ PD1–10 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4 – 05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1 – 05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Coconut Oil 76 | Cargill Industrial Specialties | Coconut Oil 76 is a refined, bleached and deodorized coconut oil. It is a highly saturated product making it useful as a lubricant in the metalworking and textile industries. | |
| Cyclohexyl vinyl ether, CHVE | BASF Corporation, Chemical Intermediates | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF Corporation, Chemical Intermediates | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | |
| Diethanolamine, pure | BASF Corporation, Chemical Intermediates | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF Corporation, Chemical Intermediates | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...view more Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). view less | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF Corporation, Chemical Intermediates | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| Diisopropanolamine | BASF Corporation, Chemical Intermediates | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | |
| Dilulin™ | Cargill Industrial Specialties | Dilulin™ is a drying oil-based reactive diluent that offers coating and printing ink formulators a valuable tool for meeting low VOC regulations. Dilulin™ is low in viscosity and is 100% solids. It is primarily designed for use as a modifier for architect...view more Dilulin™ is a drying oil-based reactive diluent that offers coating and printing ink formulators a valuable tool for meeting low VOC regulations. Dilulin™ is low in viscosity and is 100% solids. It is primarily designed for use as a modifier for architectural and general maintenance coatings, where lower viscosity and/or lower VOC is required. It has similar functionality in printing ink formulations. view less | |
| Dispex® Ultra PX 4575 | BASF Corporation, Chemical Intermediates | Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra ...view more Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. view less | |
| epsilon-Caprolactone, CLO | BASF Corporation, Chemical Intermediates | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...view more Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. view less | |
| Ethylene diamine | BASF Corporation, Chemical Intermediates | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF Corporation, Chemical Intermediates | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Formic acid | BASF Corporation, Chemical Intermediates | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| HNDA | BASF Corporation, Chemical Intermediates | HNDA (2,6-naphthalene dicarboxylic acid) is a key co-monomer for the production of polyester powder coatings as a bisphenol A replacement. As a component in film coatings, HNDA increases heat deflection temperature, lowers gas permeability, and improves ...view more HNDA (2,6-naphthalene dicarboxylic acid) is a key co-monomer for the production of polyester powder coatings as a bisphenol A replacement. As a component in film coatings, HNDA increases heat deflection temperature, lowers gas permeability, and improves UV resistance. view less | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF Corporation, Chemical Intermediates | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...view more Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating view less | |
| Imidazole | BASF Corporation, Chemical Intermediates | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...view more Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. view less | |
| Iso-Butyl vinyl ether, IBVE | BASF Corporation, Chemical Intermediates | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...view more Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| Isophorone diamine | BASF Corporation, Chemical Intermediates | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...view more Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. view less | |
| KC Z2-Z3 Linseed Oil | Cargill Industrial Specialties | KCZ 2/3 Linseed Oil is a heat polymerized (bodied) linseed oil for use in paints, varnishes, enamels, and similar applications. | |
| Liquid NVC | BASF Corporation, Chemical Intermediates | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| Methyl Soyate | Cargill Industrial Specialties | Methyl Soyate is a vegetable based solvent with low viscosity and excellent solvency. Methyl Soyate applications include, Industrial cleaning solvent, metal cleaning, precision cleaning replacement, car care and similar applications. | |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | BASF Corporation, Chemical Intermediates | N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modifi...view more N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion properties of the resin. view less | |
| N-Dodecyl vinyl ether, DDVE | BASF Corporation, Chemical Intermediates | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy si...view more N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| N-Ethylpyrrolidone, NEP | BASF Corporation, Chemical Intermediates | N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for...view more N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for water-borne coatings, and for electro insulation coatings. In many applications N-Ethylpyrrolidone can replace N-Methylpyrrolidone. view less | |
| N-Methylethanolamine | BASF Corporation, Chemical Intermediates | N-Methylethanolamine is a building block for the modification of epoxy resins. Methylethanolamine modified epoxy resins are suited for cationic electro deposition coatings. | |
| N-Methylpyrrolidone, NMP | BASF Corporation, Chemical Intermediates | N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings...view more N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings. view less | |
| N-Octadecyl vinyl ether, ODVE | BASF Corporation, Chemical Intermediates | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...view more N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| N-Vinyl-Caprolactam, NVC | BASF Corporation, Chemical Intermediates | N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototypin...view more N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototyping. N-Vinylcaprolactame, is a co-monomer for hydrophobic modified PVP (Polyvinylpyrrolidone) especially used in oilfield, cosmetics and adhesives. view less | |
| N-Vinyl-caprolactam (NVC) | BASF Corporation, Chemical Intermediates | N-Vinyl-caprolactam (NVC) is reactive diluent (monomer) for radiation curing. N-Vinyl-caprolactam is highly reactive for radical polymerization and offers excellent wetting and adhesion. | |
| N-Vinyl-pyrrolidon (NVP) | BASF Corporation, Chemical Intermediates | N-Vinyl-pyrrolidon (NVP) is a reactive diluent (monomer) for radiation curing. It is highly reactive for radical polymerization, excellent wetting and adhesion. | |
| N-Vinylpyrrolidone, NVP | BASF Corporation, Chemical Intermediates | N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a react...view more N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a reactive diluent in UV coatings, UV inks and UV adhesives. view less | |
| Neopentane diamine | BASF Corporation, Chemical Intermediates | Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with ep...view more Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with epoxy resins. Due to its structure, it is less water-sensitive compared to non-branched aliphatic amines. view less |
