| #1 Castor Oil | Acme Hardesty Co. | #1 Castor Oil is one of the oldest and most versatile products in use today. It is a natural product, made from the beans of the castor plant which can be grown in any tropical region. As a natural polyol, it is commanding increasing attention as a highly...view more #1 Castor Oil is one of the oldest and most versatile products in use today. It is a natural product, made from the beans of the castor plant which can be grown in any tropical region. As a natural polyol, it is commanding increasing attention as a highly effective ingredient in polyurethane applications, replacing the traditional petroleum based polyols. This product can be used as a carrier for pigments and dyes in paints, coatings, and inks, and as an ingredient in alkyd resins used in varnishes and coatings. view less | Request Sample |
| 1-Vinylimidazole, VIM | BASF Corporation, Chemical Intermediates | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF Corporation, Chemical Intermediates | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF Corporation, Chemical Intermediates | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF Corporation, Chemical Intermediates | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving pola...view more 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. view less | |
| 1,4-Butanediol, BDO | BASF Corporation, Chemical Intermediates | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF Corporation, Chemical Intermediates | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF Corporation, Chemical Intermediates | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF Corporation, Chemical Intermediates | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF Corporation, Chemical Intermediates | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl Hexyl Stearate | Acme Hardesty Co. | 2-Ethyl Hexyl Stearate, also known as Octyl Stearate, is a renewable palm derivative with a variety of uses in both personal care and industrial applications. It has similar properties to Isopropyl Myristate. It is ideal for a number of uses and applicati...view more 2-Ethyl Hexyl Stearate, also known as Octyl Stearate, is a renewable palm derivative with a variety of uses in both personal care and industrial applications. It has similar properties to Isopropyl Myristate. It is ideal for a number of uses and applications. view less | Request Sample |
| 2-Ethyl-4-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF Corporation, Chemical Intermediates | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF Corporation, Chemical Intermediates | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF Corporation, Chemical Intermediates | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2-Octanol 99% | Acme Hardesty Co. | 2-Octanol 99% is an aromatic, colorless, transparent liquid. It is a possible alternative for the petrochemical 2-ethylhexanol in plasticizers. It is used as a frother for mineral flotation, a flow aid, a defoaming agent in paper production, a solvent for...view more 2-Octanol 99% is an aromatic, colorless, transparent liquid. It is a possible alternative for the petrochemical 2-ethylhexanol in plasticizers. It is used as a frother for mineral flotation, a flow aid, a defoaming agent in paper production, a solvent for fats and waxes, and to produce intermediates for perfumes and artificial flavors. view less | Request Sample |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF Corporation, Chemical Intermediates | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF Corporation, Chemical Intermediates | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF Corporation, Chemical Intermediates | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| AHCOHOL™ 0898 | Acme Hardesty Co. | AHCOHOL™ 0898 (Octyl Alcohol) is a vegetable-based fatty alcohol used in perfume and fragrance manufacturing or as an intermediate in the production of detergents and other cleaners. Octyl Alcohol also comes in both liquid and solid forms. | Request Sample |
| AHCOHOL™ 1618 50-50 | Acme Hardesty Co. | AHCOHOL™ 1618 50-50 (Cetearyl Alcohol) is a vegetable-based, non-animal-derived fatty alcohol in standard bead form. Cetearyl Alcohol can be used as an emollient, opacifying agent, foam booster, or thickener for facial creams, lotions, and hair conditione...view more AHCOHOL™ 1618 50-50 (Cetearyl Alcohol) is a vegetable-based, non-animal-derived fatty alcohol in standard bead form. Cetearyl Alcohol can be used as an emollient, opacifying agent, foam booster, or thickener for facial creams, lotions, and hair conditioners. It has a hydroxyl value of 210-225. view less | Request Sample |
| AHCOHOL 1618 PS | Acme Hardesty Co. | AHCOHOL 1618 PS (Cetearyl Alcohol) is a vegetable based, non-animal derived fatty alcohol in standard bead form. Cetearyl Alcohol can be used as an emollient, opacifying agent, foam booster, or thickener for facial creams, lotions, and hair conditioners, ...view more AHCOHOL 1618 PS (Cetearyl Alcohol) is a vegetable based, non-animal derived fatty alcohol in standard bead form. Cetearyl Alcohol can be used as an emollient, opacifying agent, foam booster, or thickener for facial creams, lotions, and hair conditioners, and has a hydroxyl value of 205-220. view less | Request Sample |
| AHCOHOL™ 1618 TA | Acme Hardesty Co. | AHCOHOL™ 1618 TA (Cetearyl Alcohol) is a vegetable based, non-animal derived fatty alcohol in standard bead form. Cetearyl Alcohol can be used as an emollient, opacifying agent, foam booster, or thickener for facial creams, lotions, and hair conditioners. | Request Sample |
| Aluminum Di Stearate Veg Based Powder | Acme Hardesty Co. | Aluminum Di Stearate Veg Based Powder is a fine white powder generally used for its lubricating and emulsion stabilizing properties. Its hydrophobic nature makes it a good thickener and coating ingredient in several cosmetic applications. It is mainly use...view more Aluminum Di Stearate Veg Based Powder is a fine white powder generally used for its lubricating and emulsion stabilizing properties. Its hydrophobic nature makes it a good thickener and coating ingredient in several cosmetic applications. It is mainly used in the formulation of makeup products such as eyeliner, mascara, lipsticks, mascara, face powders, and foundations. view less | Request Sample |
| Baxxodur™ EC 201 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF Corporation, Chemical Intermediates | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF Corporation, Chemical Intermediates | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF Corporation, Chemical Intermediates | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Butanediol divinyl ether | BASF Corporation, Chemical Intermediates | Butanediol divinyl ether is a colorless to yellow liquid, with a characteristic odor. It is soluble in water and with many organic solvents. Butanediol divinyl ether is used in the production of weather-resistant and radiation-curing paints. | |
| Capromer PD1 – 10 (PolyCLO NPG1000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. P...view more Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desire view less | |
| Capromer PD1 – 20 (PolyCLO NPG2000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. view less | |
| Capromer™ PD1–10 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4 – 05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1 – 05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Castor Oil USP | Acme Hardesty Co. | Castor Oil USP is a viscous liquid derived from the beans of the castor plant. It is rich in emollients which soften and soothe skin and hair. The oil is known to deeply penetrate the skin and help to retain moisture. Castor Oil USP has antibacterial, ant...view more Castor Oil USP is a viscous liquid derived from the beans of the castor plant. It is rich in emollients which soften and soothe skin and hair. The oil is known to deeply penetrate the skin and help to retain moisture. Castor Oil USP has antibacterial, anti-inflammatory, moisturizing, and soothing benefits. It is used in a variety of cosmetic applications as an emollient or to provide conditioning and moisturization properties. view less | Request Sample |
| Cyclohexyl vinyl ether, CHVE | BASF Corporation, Chemical Intermediates | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF Corporation, Chemical Intermediates | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | |
| Diethanolamine, pure | BASF Corporation, Chemical Intermediates | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF Corporation, Chemical Intermediates | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...view more Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). view less | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF Corporation, Chemical Intermediates | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| Diisopropanolamine | BASF Corporation, Chemical Intermediates | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | |
| Dispex® Ultra PX 4575 | BASF Corporation, Chemical Intermediates | Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra ...view more Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. view less | |
| epsilon-Caprolactone, CLO | BASF Corporation, Chemical Intermediates | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...view more Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. view less | |
| Ethylene diamine | BASF Corporation, Chemical Intermediates | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF Corporation, Chemical Intermediates | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Formic acid | BASF Corporation, Chemical Intermediates | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| Glycerine 99.7% | Acme Hardesty Co. | Glycerine 99.7% is one of the most versatile and safest chemicals available. It is used as an intermediate, softener and a plasticizer. This product can be either shipped in as small as a few drums or as large as a rail-car. | Request Sample |
| HNDA | BASF Corporation, Chemical Intermediates | HNDA (2,6-naphthalene dicarboxylic acid) is a key co-monomer for the production of polyester powder coatings as a bisphenol A replacement. As a component in film coatings, HNDA increases heat deflection temperature, lowers gas permeability, and improves ...view more HNDA (2,6-naphthalene dicarboxylic acid) is a key co-monomer for the production of polyester powder coatings as a bisphenol A replacement. As a component in film coatings, HNDA increases heat deflection temperature, lowers gas permeability, and improves UV resistance. view less | |
| Hydrogenated Castor Oil | Acme Hardesty Co. | Hydrogenated Castor Oil is a versatile ingredient for a number of applications. Also called castor wax, this product is a hard, brittle vegetable wax produced from the hydrogenation of castor oil. It is available in powder or flake form. This product is u...view more Hydrogenated Castor Oil is a versatile ingredient for a number of applications. Also called castor wax, this product is a hard, brittle vegetable wax produced from the hydrogenation of castor oil. It is available in powder or flake form. This product is used as a viscosity modifier, helps with improvements in grease and oil resistance, and a carrier/dispersant. It can be shipped by the pallet or by the truckload. view less | Request Sample |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF Corporation, Chemical Intermediates | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...view more Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating view less | |
| Imidazole | BASF Corporation, Chemical Intermediates | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...view more Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. view less | |
| Iso-Butyl vinyl ether, IBVE | BASF Corporation, Chemical Intermediates | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...view more Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| Isophorone diamine | BASF Corporation, Chemical Intermediates | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...view more Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. view less | |
| Lauryl Amine Oxide (LAO) | Acme Hardesty Co. | Lauryl Amine Oxide (LAO) is a standard liquid surfactant. It appears as a clear yellow liquid. This product is used as a viscosity modifier and foam enhancer for shampoos and shower gels. It is also applied as a foam enhancer and detergent in hard surface...view more Lauryl Amine Oxide (LAO) is a standard liquid surfactant. It appears as a clear yellow liquid. This product is used as a viscosity modifier and foam enhancer for shampoos and shower gels. It is also applied as a foam enhancer and detergent in hard surface cleaners, sanitizing products, dishwashing liquids, and car wash systems. In addition, this product is suitable as a water-based nonionic surfactant compatible with anionic and cationic systems. view less | Request Sample |
| Liquid NVC | BASF Corporation, Chemical Intermediates | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| Magnesium Stearate NF Kosher Powder | Acme Hardesty Co. | Magnesium Stearate NF Kosher Powder is a fine white powder generally used for its lubricating and emulsion-stabilizing properties. Its hydrophobic nature makes it a good thickener and coating ingredient in a number of cosmetic applications. It acts as a f...view more Magnesium Stearate NF Kosher Powder is a fine white powder generally used for its lubricating and emulsion-stabilizing properties. Its hydrophobic nature makes it a good thickener and coating ingredient in a number of cosmetic applications. It acts as a film-forming and anti-caking agent and is useful for enhanced slip and silkiness. Magnesium Stearate is a widely used texturizer, opacifier, and non-gelling thickener for a variety of personal care products and color cosmetics such as eyeliner, mascara, lipsticks, mascara, face powders, and foundations. view less | Request Sample |
| Medium Chain Triglyceride (MCT) 3595 Kosher Liquid | Acme Hardesty Co. | Medium Chain Triglyceride (MCT) is a non-greasy, natural emollient that provides a silky skin feel. It is fast drying and is an excellent wetting agent and binder in color cosmetics. It also serves as a dispersing agent for inorganic UV filters and helps ...view more Medium Chain Triglyceride (MCT) is a non-greasy, natural emollient that provides a silky skin feel. It is fast drying and is an excellent wetting agent and binder in color cosmetics. It also serves as a dispersing agent for inorganic UV filters and helps to form an occlusive barrier in skin and sun care formulations. It is highly versatile and suitable for all skin types and a wide variety of products. view less | Request Sample |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | BASF Corporation, Chemical Intermediates | N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modifi...view more N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion properties of the resin. view less | |
| N-Dodecyl vinyl ether, DDVE | BASF Corporation, Chemical Intermediates | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy si...view more N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| N-Ethylpyrrolidone, NEP | BASF Corporation, Chemical Intermediates | N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for...view more N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for water-borne coatings, and for electro insulation coatings. In many applications N-Ethylpyrrolidone can replace N-Methylpyrrolidone. view less | |
| N-Methylethanolamine | BASF Corporation, Chemical Intermediates | N-Methylethanolamine is a building block for the modification of epoxy resins. Methylethanolamine modified epoxy resins are suited for cationic electro deposition coatings. | |
| N-Methylpyrrolidone, NMP | BASF Corporation, Chemical Intermediates | N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings...view more N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings. view less | |
| N-Octadecyl vinyl ether, ODVE | BASF Corporation, Chemical Intermediates | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...view more N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| N-Vinyl-Caprolactam, NVC | BASF Corporation, Chemical Intermediates | N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototypin...view more N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototyping. N-Vinylcaprolactame, is a co-monomer for hydrophobic modified PVP (Polyvinylpyrrolidone) especially used in oilfield, cosmetics and adhesives. view less | |
| N-Vinyl-caprolactam (NVC) | BASF Corporation, Chemical Intermediates | N-Vinyl-caprolactam (NVC) is reactive diluent (monomer) for radiation curing. N-Vinyl-caprolactam is highly reactive for radical polymerization and offers excellent wetting and adhesion. | |
| N-Vinyl-pyrrolidon (NVP) | BASF Corporation, Chemical Intermediates | N-Vinyl-pyrrolidon (NVP) is a reactive diluent (monomer) for radiation curing. It is highly reactive for radical polymerization, excellent wetting and adhesion. | |
| N-Vinylpyrrolidone, NVP | BASF Corporation, Chemical Intermediates | N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a react...view more N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a reactive diluent in UV coatings, UV inks and UV adhesives. view less | |
| Neopentane diamine | BASF Corporation, Chemical Intermediates | Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with ep...view more Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with epoxy resins. Due to its structure, it is less water-sensitive compared to non-branched aliphatic amines. view less | |
| N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine | BASF Corporation, Chemical Intermediates | N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine is a cross linker for epoxy resins. N,N'-Bis-(3-aminopropyl)-ethylene diamine is used for two-component epoxy coatings, epoxy-based adhesives and plastic parts. Due to its high functionality and low equ...view more N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine is a cross linker for epoxy resins. N,N'-Bis-(3-aminopropyl)-ethylene diamine is used for two-component epoxy coatings, epoxy-based adhesives and plastic parts. Due to its high functionality and low equivalent weight, N,N'-Bis-(3-aminopropyl)-ethylene diamine enables high cross linking density. view less | |
| N,N-BIS(3-Aminopropyl)-methylamine | BASF Corporation, Chemical Intermediates | N,N-BIS(3-Aminopropyl) methylamine is a potential building block for polyurethanes, cross linker for epoxy resins. N,N-Bisaminopropyl-methylamine is suitable for epoxy coatings and epoxy-based plastic parts. It may be used to prepare cationic stabilized...view more N,N-BIS(3-Aminopropyl) methylamine is a potential building block for polyurethanes, cross linker for epoxy resins. N,N-Bisaminopropyl-methylamine is suitable for epoxy coatings and epoxy-based plastic parts. It may be used to prepare cationic stabilized polyurethane dispersions. view less | |
| N,N-DI-(2-hydroxyethyl) aniline | BASF Corporation, Chemical Intermediates | N,N-DI-(2-hydroxyethyl) aniline is an accelerator for radical initiated polymerization of unsaturated polyesters. Catalyst for epoxy reactions. | |
| N,N-Diethylethanol-amine | BASF Corporation, Chemical Intermediates | N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethy...view more N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes. N,N-Diethylethanolamine offers an optimal compatibility with resins and film matrix. N,N-Diethylethanolamine supports the flow and leveling during film forming. view less | |
| N,N-Diisopropanol-P-toluidine | BASF Corporation, Chemical Intermediates | N,N-Diisopropanol-P-toluidine is an accelerator for radical initiated polymerization of unsaturated polyesters, Catalyst for epoxy reactions. Coatings technology for composite production. | |
| N,N-Dimethylbenzyl-amine Lupragen® N 103 | BASF Corporation, Chemical Intermediates | N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modifie...view more N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modified epoxy resins are used for cationic electro deposition coatings. N,N-Dimethylbenzyl-amine is used as catalyst for the production of polyurethanes (e.g. for plastic parts). view less | |
| N,N-Dimethylcyclohexyl-amine Lupragen® N 100 | BASF Corporation, Chemical Intermediates | N,N-Dimethylcyclohexyl-amine Lupragen® N 100 is a catalyst for isocyanate reactions. Coatings technology for polyurethane resin production. | |
| N,N-Dimethylethanol-amine Lupragen® N 101 | BASF Corporation, Chemical Intermediates | N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints...view more N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints. N,N-Dimethylethanolamine is also used as neutralization agent in paints based on water-borne polyesters, alkyds, acrylic resins and polyurethanes. view less | |
| NPG, Neol® Neopentylglycol | BASF Corporation, Chemical Intermediates | NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for p...view more NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for plastic coatings and for repair coatings. Neopentyl-glycol is used for water borne polyesters for automotive coatings, repair coatings and coatings for general industry. It is also used for polyesters for powder coatings. Neopentylglycol shows high reactivity for esterification and trans-esterification. Neopentylglycol introduces solubility and compatibility into polyester molecules, avoiding crystallinity. NNeopentylglycol offers high chemical, thermal and UV resistance. Polyesters show good hardness and excellent weather resistance. view less | |
| Oleic Acid | Acme Hardesty Co. | Oleic Acid is available as tallow- or palm-based, food grade, and Kosher grade varieties. It is non-GMO, allergen free, BDE free, and from RSPO certified producers. This product is recommended as an emulsifier and TOFA replacement for paints and coatings. | Request Sample |
| Pale Pressed Castor Oil | Acme Hardesty Co. | Pale Pressed Castor Oil is a natural vegetable oil rich in unsaturated fatty acids including omega-6 and omega-9 fatty acids, as well as ricinoleic acid. It is clear and free from suspended matter with low free fatty acid content and is useful for a wide ...view more Pale Pressed Castor Oil is a natural vegetable oil rich in unsaturated fatty acids including omega-6 and omega-9 fatty acids, as well as ricinoleic acid. It is clear and free from suspended matter with low free fatty acid content and is useful for a wide variety of cosmetic applications. Pale Pressed Castor Oil has a hydroxyl value of 160-168 mg KOH/g. view less | Request Sample |
| PEG 200 (Polyethylene Glycol 200) | Acme Hardesty Co. | PEG 200 (Polyethylene Glycol 200) is a clear, colorless liquid that is made from sugar cane waste so it is naturally derived and renewable. It is completely soluble in water and has an average molecular weight of 190 - 210. PEGS are another group of prod...view more PEG 200 (Polyethylene Glycol 200) is a clear, colorless liquid that is made from sugar cane waste so it is naturally derived and renewable. It is completely soluble in water and has an average molecular weight of 190 - 210. PEGS are another group of products with an incredibly long list of uses and applications from industrial uses to food and pharma, and everything in between. view less | Request Sample |
| PEG 300 (Polyethylene Glycol 300) | Acme Hardesty Co. | PEG 300 (Polyethylene Glycol 300) is a clear, colorless liquid that is made from sugar cane waste so it is naturally derived and renewable. It is completely soluble in water and has an average molecular weight of 288 - 311. PEGS are another group of produ...view more PEG 300 (Polyethylene Glycol 300) is a clear, colorless liquid that is made from sugar cane waste so it is naturally derived and renewable. It is completely soluble in water and has an average molecular weight of 288 - 311. PEGS are another group of products with an incredibly long list of uses and applications from industrial uses to food and pharma, and everything in between. view less | Request Sample |
