| Special-Primer AP 1010 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, an...view more Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. view less | |
| Special-Primer AP 1030 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used ...view more Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used to solve adhesion problems to flexible substrates like thermoplastic elastomers, thermoplastic polyurethane and EPDM (e.g. "Vistalon" from Exxon, "Nordel" from DuPont). After coating with a thin film of Special-Primer AP 1030, these flexible substrates can be painted, printed, glued or labelled. Special-Primer AP 1030 is tinted white for black substrates. view less | |
| Special-Primer PE 6800 | Worlée-Chemie G.m.b.H. | Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Spec...view more Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Special Primer PE 6800 is suitable as an adhesion promoter for polyethylene of high, medium and low density (lowdensity-polyethylene). This product appears as a yellowish to brown, low viscous liquid. view less | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...view more Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. view less | |
| Special-Primer PP 5130 (2.5% I Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled po...view more Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 5130 (5% In Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlo...view more Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer resins. It is only soluble in aromatics and chlorinated hydrocarbons. There is limited solubility in aliphatic hydrocarbons. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 7550 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in a...view more Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other solvents like esters, ketones etc.. This product appears as a yellowish, low viscous liquid. view less | |
| Special-Primer PP 7560 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...view more WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. view less | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...view more WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. view less | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...view more WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. view less | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...view more WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). view less | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...view more WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. view less | |
| WorléeAdd 345 | Worlée-Chemie G.m.b.H. | WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears...view more WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears as a clear to slightly turbid yellowish liquid. view less | |
| WorléeAdd 351 | Worlée-Chemie G.m.b.H. | WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk ...view more WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk gloss to glossy latex paints. This product can also be used for paints and printing inks based on alcohols. view less | |
| WorléeAdd 352 | Worlée-Chemie G.m.b.H. | WorléeAdd 352 is a high molecular silicone additive for the improvement of surface properties of water thinnable lacquers and printing inks. It appears as a turbid, creamy, still-flowing substance. W´Add 352 improves scratch resistance of water thinnable ...view more WorléeAdd 352 is a high molecular silicone additive for the improvement of surface properties of water thinnable lacquers and printing inks. It appears as a turbid, creamy, still-flowing substance. W´Add 352 improves scratch resistance of water thinnable lacquers and printing inks as well as satin glossy up to glossy latex prints. W´Add 352 can be used for alcohol based lacquers and printing inks. view less | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...view more WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. view less | |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coat...view more WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coating systems and printing inks. It is especially recommended in thixotropic PUR systems. view less | |
| WorléeAdd 372 | Worlée-Chemie G.m.b.H. | WorléeAdd 372 is a silicone based antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 372 is also very well suited for high solids. W´Add 372 is very effective at concentrations of 0.05 - 0.80% and can be adde...view more WorléeAdd 372 is a silicone based antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 372 is also very well suited for high solids. W´Add 372 is very effective at concentrations of 0.05 - 0.80% and can be added at any process stage during manufacture. If lower concentration is desired, it may be diluted with ketone or ester solvents. view less | |
| WorléeAdd 373 N | Worlée-Chemie G.m.b.H. | WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperf...view more WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperfections. This product appears as a clourless, low viscous liquid. view less | |
| WorléeAdd 412 | Worlée-Chemie G.m.b.H. | WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the ...view more WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the system easier. By this, precipitation can be avoided. view less | |
| WorléeAdd 422 | Worlée-Chemie G.m.b.H. | WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is solu...view more WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is soluble in water, alcohols and ketones. It is partially soluble in aliphatic and aromatic hydrocarbons and esters. view less | |
| WorléeAdd 428 | Worlée-Chemie G.m.b.H. | WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coi...view more WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coil coating primer. Minimum film thickness should be 15 µ. view less | |
| WorléeAdd 456 | Worlée-Chemie G.m.b.H. | WorléeAdd 456 is a nitrite-free organic corrosion inhibitor for aqueous lacquers. W´Add 456 is used in aqueous systems as an anti flash rust agent as well as for improving long term corrosion resistance. Application fields are acrylic dispersions, alkyd e...view more WorléeAdd 456 is a nitrite-free organic corrosion inhibitor for aqueous lacquers. W´Add 456 is used in aqueous systems as an anti flash rust agent as well as for improving long term corrosion resistance. Application fields are acrylic dispersions, alkyd emulsion, one-component and two-component PU systems. This product appears as a colourless to slightly yellowish liquid. view less | |
| WorléeAdd 480 N | Worlée-Chemie G.m.b.H. | WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred app...view more WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred application fields are aqueous baking enamels for example on basis polyester, alkyd or acrylate in combination with amino resin or blocked polyisocyanate as well as air and oven drying two component polyurethane systems. W´Add 480 N is incorporated in the lacquer by thoroughly stirring. The optimal addition quantity empirically is 1.0 - 5.0% calculated on total formulation and should be determined by a serial trial. view less | |
| WorléeAdd 486 | Worlée-Chemie G.m.b.H. | WorléeAdd 486 is a special polyester resin used to improve the adhesion of solvent based stoving and 2 component PUR systems. The addition of W´Add 486 improves the adhesion on different substrates, like metals, melamine resin coated chipboards, etc. Also...view more WorléeAdd 486 is a special polyester resin used to improve the adhesion of solvent based stoving and 2 component PUR systems. The addition of W´Add 486 improves the adhesion on different substrates, like metals, melamine resin coated chipboards, etc. Also the elasticity of paint systems can be improved by W´Add 486. view less | |
| WorléeAdd 487 | Worlée-Chemie G.m.b.H. | WorléeAdd 487 is a special polyester resin used to improve the adhesion of solvent-based air drying, stoving and 2 component PUR-systems. The addition of W ́Add 487 improves the adhesion on different substrates like metals, melamine resin coated chipboard...view more WorléeAdd 487 is a special polyester resin used to improve the adhesion of solvent-based air drying, stoving and 2 component PUR-systems. The addition of W ́Add 487 improves the adhesion on different substrates like metals, melamine resin coated chipboards, etc. It can also improve the elasticity of paint systems. This product appears as a colourless, light yellow liquid. view less | |
| WorléeAdd 602 | Worlée-Chemie G.m.b.H. | WorléeAdd 602 is an antifoam agent and defoamer mainly for 2 compound PUR and epoxy resin coatings. W´Add 602 should be added to the binder during production before the addition of other additives. | |
| WorléeAdd 603 | Worlée-Chemie G.m.b.H. | WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition impr...view more WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition improves normal substrate wetting as well as flow at the same time. The active ingredients correspond to FDA-§ 175.300. Application fields are can coatings, airdrying industrial coatings, wood and furniture coatings, solvent free UV-systems as well as EP-coatings. view less | |
| WorléeAdd 604 N | Worlée-Chemie G.m.b.H. | WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with vario...view more WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with various emulsion polymers. The product can be directly dispersed into aqueous systems and can be used in basic as well as in acidic lacquers. Sufficient shear forces should be used. view less | |
| WorléeAdd 677 | Worlée-Chemie G.m.b.H. | WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house pai...view more WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house paints, 2 component-EP-systems, industrial coatings, printing inks etc..This product appears as a clear, slightly yellowish liquid. view less | |
| WorléeAdd 678 | Worlée-Chemie G.m.b.H. | WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous...view more WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous liquid. view less | |
| WorléeAdd 781 | Worlée-Chemie G.m.b.H. | WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of hi...view more WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of high film thickness with reduced blister building. view less | |
| WorléeCryl® 7107 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7107 is a very hard methacrylic copolymer emulsion supplied as 40% in water. It improves the surface properties in water soluble lacquer systems, and it has excellent compatibility with other polymer emulsion. This product effects improvement ...view more WorléeCryl® 7107 is a very hard methacrylic copolymer emulsion supplied as 40% in water. It improves the surface properties in water soluble lacquer systems, and it has excellent compatibility with other polymer emulsion. This product effects improvement in film hardness, sanding, blocking resistance and stackability. view less | |
| WorléeCryl® 7120 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7120 is a styrene acrylic copolymer emulsion. It is used for corrosion inhibiting primers on different metals (e.g. iron, aluminium), and it has good weather resistance. This grade is supplied in the form of 49% in water. | |
| WorléeCryl® 7123 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7123 is a high solids acrylic copolymer dispersion. It is high-elastic, even at low temperature, and offers excellent water and weather resistance, as well as adhesion on different substrates. Application fields include caulks, roof coatings a...view more WorléeCryl® 7123 is a high solids acrylic copolymer dispersion. It is high-elastic, even at low temperature, and offers excellent water and weather resistance, as well as adhesion on different substrates. Application fields include caulks, roof coatings and adhesives demanding a high alkali and humidity resistance. Due to its high alkali resistance, WorléeCryl® 7123 can also be used on fresh concrete. view less | |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This gra...view more WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This grade is supplied in the form of 42% in water. view less | |
| WorléeCryl® 7137 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7137 is a styrene acrylic copolymer emulsion. W´Cryl 7137 has widespread application for top coats on plastics, metal and wood. It has low water absorption and very good adhesion on steel. Therefore, WorléeCryl® 7137 can also be used for anti-...view more WorléeCryl® 7137 is a styrene acrylic copolymer emulsion. W´Cryl 7137 has widespread application for top coats on plastics, metal and wood. It has low water absorption and very good adhesion on steel. Therefore, WorléeCryl® 7137 can also be used for anti-corrosive primers. This grade is supplied in the form of 42% in water. view less | |
| WorléeCryl® 7189 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7189 is a methacrylic copolymer emulsion. W´Cryl 7189 is a binder for the production of synthetic resin-bound renderings, wall paints, flagstone- and building adhesives. The product features a high initial adhesion and a very fast setting. W´...view more WorléeCryl® 7189 is a methacrylic copolymer emulsion. W´Cryl 7189 is a binder for the production of synthetic resin-bound renderings, wall paints, flagstone- and building adhesives. The product features a high initial adhesion and a very fast setting. W´Cryl 7189 can also be used for the production of sealing compounds. This grade is supplied in the form of 49% in water. view less | |
| WorléeCryl® 7410 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7410 is a self cross linking acrylic copolymer emulsion. This grade is supplied in the form of 45% in water. It is an acrylic emulsion for the formulation of aqueous wood and furniture lacquers. | |
| WorléeCryl® 7450 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7450 is an aqueous pure acrylic emulsion which shows a very high blocking resistance. This grade is supplied in the form of 45% in water. The recommended application is to use this binder for the formulation of parquet sealers and stains in co...view more WorléeCryl® 7450 is an aqueous pure acrylic emulsion which shows a very high blocking resistance. This grade is supplied in the form of 45% in water. The recommended application is to use this binder for the formulation of parquet sealers and stains in combination with PU emulsions. view less | |
| WorléeCryl® 7461 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7461 is an aqueous pure acrylic solution. It is a self-crosslinking pure acrylic dispersion with high solids content for formulating block-resistant and high gloss emulsion paints with very good levelling properties. This grade is supplied in ...view more WorléeCryl® 7461 is an aqueous pure acrylic solution. It is a self-crosslinking pure acrylic dispersion with high solids content for formulating block-resistant and high gloss emulsion paints with very good levelling properties. This grade is supplied in the form of 55% in water. The outstanding characteristic of this binder is the high block resistance which is usually demanded for window- and door-application etc. view less | |
| WorléeCryl® 7463 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7463 is a self-crosslinking pure acrylic emulsion for the formulation of blocking resistant and high gloss brushable paints with a low VOC content. This grade is supplied in the form of 55% in water. It is a high solid acrylic dispersion for t...view more WorléeCryl® 7463 is a self-crosslinking pure acrylic emulsion for the formulation of blocking resistant and high gloss brushable paints with a low VOC content. This grade is supplied in the form of 55% in water. It is a high solid acrylic dispersion for the formulation of high gloss emulsion paints for the production of very easy processable paints and DIY lacquer-systems. view less | |
| WorléeCryl® 7520 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7520 is a pure acrylic emulsion. It is used for manufacturing dispersion paints for indoor and outdoor application and coloured quartz sand plaster. This product has widely spread compatibility with pigments and fillers. WorléeCryl® 7520 is su...view more WorléeCryl® 7520 is a pure acrylic emulsion. It is used for manufacturing dispersion paints for indoor and outdoor application and coloured quartz sand plaster. This product has widely spread compatibility with pigments and fillers. WorléeCryl® 7520 is supplied as 50% in water. view less | |
| WorléeCryl® 8040 | Worlée-Chemie G.m.b.H. | WorléeCryl® 8040 is an aqueous acrylic solution, free of emulsifiers. It is a ready-to-use solution that can be used for the production of flexographic- and gravure inkws and overprint varnishes. This product shows excellent compatibility with polystyrene...view more WorléeCryl® 8040 is an aqueous acrylic solution, free of emulsifiers. It is a ready-to-use solution that can be used for the production of flexographic- and gravure inkws and overprint varnishes. This product shows excellent compatibility with polystyrene-, acrylic- and methacrylic polymers. It can be used with most resins, for example as additive in combination with W´Cryl 8265 to improve dry and gloss on porous substrates. Crosslinking with water soluble melamine resins provides chemical resistant coatings. view less | |
| WorléeCryl® 8043 | Worlée-Chemie G.m.b.H. | WorléeCryl® 8043 is an aqueous acrylic polymer solution, free of emulsifiers. It is an ideal grinding vehicle for highly filled pigment concentrates with excellent colour strength and gloss development. A wide range of flexographic and gravure printing in...view more WorléeCryl® 8043 is an aqueous acrylic polymer solution, free of emulsifiers. It is an ideal grinding vehicle for highly filled pigment concentrates with excellent colour strength and gloss development. A wide range of flexographic and gravure printing inks are obtained with this product. Due to its excellent pigment wetting properties W´Cryl 8043 provides gloss and colour intensity normally reached just with solvent systems. view less | |
| WorléeCryl® 8060 | Worlée-Chemie G.m.b.H. | WorléeCryl® 8060 is an aqueous acrylic resin solution, free of emulsifier. It is a ready to use resin solution and is excellently suitable for the production of flexographic- and gravure inks. In combination with acrylic emulsion as W´Cryl 8290, VOCfree, ...view more WorléeCryl® 8060 is an aqueous acrylic resin solution, free of emulsifier. It is a ready to use resin solution and is excellently suitable for the production of flexographic- and gravure inks. In combination with acrylic emulsion as W´Cryl 8290, VOCfree, fast drying overprint varnishes can be formulated. This high solid resin solution is especially to be recommended as a replacement for comparable alcohol- and water diluted products. W´Cryl 8060 is compatible with the most various pigments, therefore it is possible to produce high solid, pure aqueous pastes. view less | |
| WorléeCryl® 8222 | Worlée-Chemie G.m.b.H. | WorléeCryl® 8222 is a styrene copolymer dispersion. It offers fast drying and good lifting properties. This product is a new type of copolymer dispersion developed for formulating mat, aqueous overprint lacquers. The dispersion is free from matting agents...view more WorléeCryl® 8222 is a styrene copolymer dispersion. It offers fast drying and good lifting properties. This product is a new type of copolymer dispersion developed for formulating mat, aqueous overprint lacquers. The dispersion is free from matting agents like waxes, silicic acids and similar products. view less | |
| WorléeCryl 8263 | Worlée-Chemie G.m.b.H. | WorléeCryl 8263 is a styrene-acrylate dispersion, DMEA-neutralised. It is suitable for the manufacture of heat resistant and high gloss printing inks and coatings. Especially remarkable is the high heat-seal strength at low Tg of the polymer. Overprint va...view more WorléeCryl 8263 is a styrene-acrylate dispersion, DMEA-neutralised. It is suitable for the manufacture of heat resistant and high gloss printing inks and coatings. Especially remarkable is the high heat-seal strength at low Tg of the polymer. Overprint varnishes can be formulated solvent-free with W´Cryl 8263. view less | |
| WorléeCryl® 8273 | Worlée-Chemie G.m.b.H. | WorléeCryl® 8273 is a styrene acrylic dispersion. It is suitable for formulating high gloss overprint varnishes with fast drying and good resistance properties. W´Cryl 8273 can be combined with most acrylates from our printing ink programme. | |
| WorléeCryl 8290 | Worlée-Chemie G.m.b.H. | WorléeCryl 8290 is a very hard, finely divided styrene-acrylic emulsion. It offers high gloss, excellent hold-out, fast drying, excellent block- and water-resistance, and excellent solvent compatibility. gloss and fast drying systems. W´Cryl 8290 is a pol...view more WorléeCryl 8290 is a very hard, finely divided styrene-acrylic emulsion. It offers high gloss, excellent hold-out, fast drying, excellent block- and water-resistance, and excellent solvent compatibility. gloss and fast drying systems. W´Cryl 8290 is a polymer for use in fast-drying, low cost inks and overprints. Its wide compatibility range with the most resins, pigments, and water dilutable solvents allows W´Cryl 8290 the formulation of high gloss and fast drying systems. Due to W´Cryl 8290's unique emulsion chemistry it offers an excellent gloss on porous substrates. view less | |
| WorléeCryl® 8410 | Worlée-Chemie G.m.b.H. | WorléeCryl® 8410 is an anionic, alkaline soluble acrylic emulsion. It is excellently suitable as sole vehicle or in combination with other W´Cryl emulsions for the production of aqueous flexographic- and gravure inks and overlay or overprint varnishes. Th...view more WorléeCryl® 8410 is an anionic, alkaline soluble acrylic emulsion. It is excellently suitable as sole vehicle or in combination with other W´Cryl emulsions for the production of aqueous flexographic- and gravure inks and overlay or overprint varnishes. The product is recommended for systems, in which the use of combustible solvents should be eliminated. view less | |
| WorléeCryl 8470 | Worlée-Chemie G.m.b.H. | WorléeCryl 8470 is a 25% acrylic resin solution in water. It is DMEA-neutralized for printing inks and OPVs. This product is cross-linkable with melamine resins. | |
| WorléeCryl 8545 | Worlée-Chemie G.m.b.H. | WorléeCryl 8545 is an acrylic emulsion supplied 50% in water. It is a polymeric emulsion produced as a basis for the manufacture of blister-lacquers. As sole component of the formulation at 80 °C a sealing is achieved. Films produced with W´Cryl 8545 are ...view more WorléeCryl 8545 is an acrylic emulsion supplied 50% in water. It is a polymeric emulsion produced as a basis for the manufacture of blister-lacquers. As sole component of the formulation at 80 °C a sealing is achieved. Films produced with W´Cryl 8545 are high gloss finished and sufficient water-resistant. W´Cryl 8545 is compatible with most acrylic resins. For the variation of the sealing properties, temperature and pressure we recommend a blend with W´Cryl 8290. To improve the film surface WorléeWax 8510 can be used without influence on the sealing properties. view less | |
| WorléeCryl® A 1135 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1135 is an acrylic resin that can be crosslinked with polyisocyanates. It is designed for the manufacture of high quality industrial paints. Paints based on this resin show excellent resistance against water, solvents and chemicals. Therefor...view more WorléeCryl® A 1135 is an acrylic resin that can be crosslinked with polyisocyanates. It is designed for the manufacture of high quality industrial paints. Paints based on this resin show excellent resistance against water, solvents and chemicals. Therefore, a wide range of application is given, especially for the coating of industrial and construction machines, high capacity vehicles etc. view less | |
| WorléeCryl® A 1218 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1218 is an acrylic resin which can be crosslinked with polyisocyanates. It has high reactivity and long pot life. This product is designed for fast drying wood and furniture lacquers. It is also CAB compatible. | |
| WorléeCryl® A 1220 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1220 is an acrylic resin that can be crosslinked with polyisocyanates. W´Cryl A 1220 is an acrylic copolymer for the manufacture of high quality plastic coatings. Due to good adhesion properties, this product is also suitable for paints on c...view more WorléeCryl® A 1220 is an acrylic resin that can be crosslinked with polyisocyanates. W´Cryl A 1220 is an acrylic copolymer for the manufacture of high quality plastic coatings. Due to good adhesion properties, this product is also suitable for paints on composite material, e.g. caravans, even on metal. view less | |
| WorléeCryl® A 1320 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1320 is an acrylic resin which can be crosslinked with polyisocyanate. It is used for high quality wood and furniture lacquers. This product exhibits good initial drying. Also, in top coats a brilliant haze-free gloss will be provided. | |
| WorléeCryl® A 2116 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2116 is a styrene acrylic which can be crosslinked with polyisocyanates. It is used for fast drying industrial paint with good gloss and also for decorative paints - in combination with W´Thix A 2125 - for effect finishes. For achieving an o...view more WorléeCryl® A 2116 is a styrene acrylic which can be crosslinked with polyisocyanates. It is used for fast drying industrial paint with good gloss and also for decorative paints - in combination with W´Thix A 2125 - for effect finishes. For achieving an optimal adhesion on steel crosslinking with Tolonate HDB (Perstorp) is necessary. view less | |
| WorléeCryl® A 2130 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2130 is an acrylic resin which can be crosslinked with polyisocyanates. W´Cryl A 2130 is combined with aliphatic polyisocanates in air and forced drying 2 component paints for industrial application with good mechanical properties as well as...view more WorléeCryl® A 2130 is an acrylic resin which can be crosslinked with polyisocyanates. W´Cryl A 2130 is combined with aliphatic polyisocanates in air and forced drying 2 component paints for industrial application with good mechanical properties as well as chemical and weather resistance. Main applications are 2 component primers, top coats and one coat systems with brilliant gloss and high body. view less | |
| WorléeCryl® A 2141 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstandi...view more WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstanding gloss, hardness, chemical- and weather-resistance. Application fields for W´Cryl A 2141 are high solid paints for facade elements, caravans and plastics. view less | |
| WorléeCryl® A 2210 60% In Aromatic HC 155-180 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2210 60% In Aromatic HC 155-180 is a styrene acrylic resin for the production of physically drying primers. This grade has a non-volatile content of 60% ± 1. It is not compatible with other binding agents e. g. alkyd resins. W´Cryl A 2210 is...view more WorléeCryl® A 2210 60% In Aromatic HC 155-180 is a styrene acrylic resin for the production of physically drying primers. This grade has a non-volatile content of 60% ± 1. It is not compatible with other binding agents e. g. alkyd resins. W´Cryl A 2210 is particularly suitable for the manufacture of fast drying primers. view less | |
| WorléeCryl® A 2218 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2218 is a styrene acrylic resin which can be crosslinked with polyisocyanates. It is preferred for the formulation of very fast drying primers, fillers, and top coats for steel and plastics. This grade has a non-volatile content of 50% ± 1. | |
| WorléeCryl® A 2335 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2335 is an acrylic resin which can be crosslinked with polyisocyanates for formulating high quality air and forced drying top and clear coats. It exhibits fast hardness development and very good adhesion for different metals. This grade has ...view more WorléeCryl® A 2335 is an acrylic resin which can be crosslinked with polyisocyanates for formulating high quality air and forced drying top and clear coats. It exhibits fast hardness development and very good adhesion for different metals. This grade has a non-volatile content of 60% ± 1. In clear-coats the use of UV-stabilizers is recommended. view less | |
| WorléeCryl® A 2445 (60% In Solvesso 100) | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2445 (60% In Solvesso 100) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is an acrylic copolymer for the manufacture of high quality industrial paints. Pain...view more WorléeCryl® A 2445 (60% In Solvesso 100) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is an acrylic copolymer for the manufacture of high quality industrial paints. Paints based on this resin show excellent resistance against water, solvents and chemicals. view less | |
| WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufac...view more WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufacture of high quality 2 component top coats. Paints based on W´Cryl A 2445 show excellent resistances against weather and chemicals. view less | |
| WorléeCryl A 3160 | Worlée-Chemie G.m.b.H. | WorléeCryl A 3160 is a polyester modified acrylic resin which can be cross linked with polyisocyanates. W´Cryl A 3160 is an acrylic polymer for the manufacture of high quality top coats with outstanding resistance properties. | |
| WorléeCryl® L 2380 | Worlée-Chemie G.m.b.H. | WorléeCryl® L 2380 is a physically drying thermoplastic acrylic resin for improving hardness, gloss, and adhesion. This grade has a non-volatile content of 50% ± 1. W´Cryl L 2380 is compatible with alkyd resins. It is soluble in ketones, esters, aromatic ...view more WorléeCryl® L 2380 is a physically drying thermoplastic acrylic resin for improving hardness, gloss, and adhesion. This grade has a non-volatile content of 50% ± 1. W´Cryl L 2380 is compatible with alkyd resins. It is soluble in ketones, esters, aromatic and dearomatized hydrocarbons as well as isoparaffines. W´Cryl L 2380 is insoluble in alcohols and water. view less | |
| WorléeCryl® L 241 | Worlée-Chemie G.m.b.H. | WorléeCryl® L 241 is a neutral low odour acrylic resin, mainly for wall and ceiling paints. It has very good insulating coat properties for nicotine-, chimney- and water spots. W´Cryl L 241 is a soft acrylic resin. Additional plasticizers are not necessar...view more WorléeCryl® L 241 is a neutral low odour acrylic resin, mainly for wall and ceiling paints. It has very good insulating coat properties for nicotine-, chimney- and water spots. W´Cryl L 241 is a soft acrylic resin. Additional plasticizers are not necessary. It has a non-volatile content of 60% ± 1. view less | |
| WorléeCryl® L 2580 | Worlée-Chemie G.m.b.H. | WorléeCryl® L 2580 is a neutral, physically drying, low odor acrylic resin, mainly for the use in wall and ceiling paints. W´Cryl L 2580 is completely soluble or dilutable respectively in white spirit and isoparaffines (Isopar H, Isopar J - Exxon). It is ...view more WorléeCryl® L 2580 is a neutral, physically drying, low odor acrylic resin, mainly for the use in wall and ceiling paints. W´Cryl L 2580 is completely soluble or dilutable respectively in white spirit and isoparaffines (Isopar H, Isopar J - Exxon). It is a soft acrylic resin. Additional plasticizers are not necessary. view less | |
| WorléeCryl® L 2822 | Worlée-Chemie G.m.b.H. | WorléeCryl® L 2822 is a neutral, physically drying, low odour acrylic resin, mainly for the use in wall and ceiling paints. | |
| WorléeDex 1177 | Worlée-Chemie G.m.b.H. | WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient ...view more WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient water resistance and resolubility during the printing process and after the stop of the roller. Due to its good compatibility with many resins and pigments W´Dex 1177 is also suitable as a combination partner for acrylic resins. W´Dex 1177 is especially environmental friendly because of its renewable raw materials and it is free of amines/ammonia and ethylene glycol. view less | |
| WorléeDex 1182 | Worlée-Chemie G.m.b.H. | WorléeDex 1182 is a dextrin modified styrene acrylic dispersion. It offers outstanding printability, excellent resolubility, fast drying, and good compatibility. This product has been developed especially as a let-down binder for the coating of extremely ...view more WorléeDex 1182 is a dextrin modified styrene acrylic dispersion. It offers outstanding printability, excellent resolubility, fast drying, and good compatibility. This product has been developed especially as a let-down binder for the coating of extremely thin papers. view less | |
| WorléeDur D 6311 (60% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeDur D 6311 (60% In Dearomatized HC 160-200) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become w...view more WorléeDur D 6311 (60% In Dearomatized HC 160-200) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become worse. Primers based on W´Dur D 6311 show good application properties (brush application), good flow and good adhesion properties. view less | |
| WorléeKyd AC 2550 | Worlée-Chemie G.m.b.H. | WorléeKyd AC 2550 is a short oil length very fast drying acrylated alkyd resin. W´Kyd AC 2550 is compatible with some short and medium oil length drying alkyds. W´Kyd AC 2550 is mainly recommended for very fast drying primers and top coats. | |
| WorléeKyd AC 2551 | Worlée-Chemie G.m.b.H. | WorléeKyd AC 2551 is a short oil length very fast drying acrylated alkyd resin. W´Kyd AC 2551 is mainly recommended for very fast drying primers and top coats. This product has a non volatile content of 60% ± 1, and it is soluble in all usual solvents. | |
| WorléeKyd AC 6030 | Worlée-Chemie G.m.b.H. | WorléeKyd AC 6030 is a low viscous, air drying, acrylated alkyd resin with good QUV and yellowing resistance, mainly for the use in low VOC house and decorative paints. W´Kyd AC 6030 is well soluble in aromatic and aliphatic hydrocarbons as well as in dea...view more WorléeKyd AC 6030 is a low viscous, air drying, acrylated alkyd resin with good QUV and yellowing resistance, mainly for the use in low VOC house and decorative paints. W´Kyd AC 6030 is well soluble in aromatic and aliphatic hydrocarbons as well as in dearomatized white spirit and isoparaffins. view less | |
| WorléeKyd B 4901 | Worlée-Chemie G.m.b.H. | WorléeKyd B 4901 is a medium oil, fast drying alkyd resin. The main application is for air and forced drying industrial, vehicle and machine paints, as well as for dearomatized do-it-yourself and radiator enamels. It has an oil content of approx. 49%. W´K...view more WorléeKyd B 4901 is a medium oil, fast drying alkyd resin. The main application is for air and forced drying industrial, vehicle and machine paints, as well as for dearomatized do-it-yourself and radiator enamels. It has an oil content of approx. 49%. W´Kyd B 4901 is compatible with nearly all medium and long oil air drying alkyd resins, as well as with maleic resins and phenolic resin modified hard resins. view less | |
| WorléeKyd B 4901 | Worlée-Chemie G.m.b.H. | WorléeKyd B 4901 is a medium oil, fast drying alkyd resin. The main application is for air and forced drying industrial, vehicle and machine paints, as well as for dearomatized do-ityourself and radiator enamels. W´Kyd B 4901 is compatible with nearly all...view more WorléeKyd B 4901 is a medium oil, fast drying alkyd resin. The main application is for air and forced drying industrial, vehicle and machine paints, as well as for dearomatized do-ityourself and radiator enamels. W´Kyd B 4901 is compatible with nearly all medium and long oil air drying alkyd resins, as well as with maleic resins and phenolic resin modified hard resins. W´Kyd B 4901 is a modern, all-round useable medium oil alkyd resin. Because of its good properties W´Kyd B 4901 is used for dearomatised and low odour industrial-, radiator-, dipand flow coating enamels and for vehicle paints. view less | |
| WorléeKyd B 4901 NV | Worlée-Chemie G.m.b.H. | WorléeKyd B 4901 NV is a medium oil, fast drying alkyd resin. The main application is for air and forced drying industrial, vehicle and machine paints, as well as for dearomatized do-it-yourself and radiator enamels. W´Kyd B 4901 nv is compatible with mos...view more WorléeKyd B 4901 NV is a medium oil, fast drying alkyd resin. The main application is for air and forced drying industrial, vehicle and machine paints, as well as for dearomatized do-it-yourself and radiator enamels. W´Kyd B 4901 nv is compatible with most of the medium and long oil air drying alkyd resins. view less | |
| WorléeKyd B 6301 (90% In Dearomat. HC) | Worlée-Chemie G.m.b.H. | WorléeKyd B 6301 (90% In Dearomat. HC) is a low viscous, long oil air-drying alkyd resin for the production of low VOC decorative and house paints. It has a non volatile content of 90% ± 1. W´Kyd B 6301 is well soluble in aromatic and aliphatic hydrocarbo...view more WorléeKyd B 6301 (90% In Dearomat. HC) is a low viscous, long oil air-drying alkyd resin for the production of low VOC decorative and house paints. It has a non volatile content of 90% ± 1. W´Kyd B 6301 is well soluble in aromatic and aliphatic hydrocarbons and in dearomatized white spirits and isoparaffines. view less | |
| WorléeKyd B 6301 (98-100% In Dearomat. HC) | Worlée-Chemie G.m.b.H. | WorléeKyd B 6301 (98-100% In Dearomat. HC) is a low viscous, long oil air-drying alkyd resin for the production of low VOC decorative and house paints. W´Kyd B 6301 is well soluble in aromatic and aliphatic hydrocarbons and in dearomatized white spirits a...view more WorléeKyd B 6301 (98-100% In Dearomat. HC) is a low viscous, long oil air-drying alkyd resin for the production of low VOC decorative and house paints. W´Kyd B 6301 is well soluble in aromatic and aliphatic hydrocarbons and in dearomatized white spirits and isoparaffines. view less | |
| WorléeKyd B 845 55% In White Spirit 145-195 | Worlée-Chemie G.m.b.H. | WorléeKyd B 845 55% In White Spirit 145-195 is a medium oil, very fast drying alkyd resin for the production of high quality air and heat drying industrial enamels and car repair enamels. W´Kyd B 845 is compatible with the usual maleic and phenolic modifi...view more WorléeKyd B 845 55% In White Spirit 145-195 is a medium oil, very fast drying alkyd resin for the production of high quality air and heat drying industrial enamels and car repair enamels. W´Kyd B 845 is compatible with the usual maleic and phenolic modified resins. This product is also used for radiator, dipping and flow coating paints and enamels for trucks touring cars, omnibuses, tractors and agricultural equipment. view less | |
| WorléeKyd B 845 70% Xylene | Worlée-Chemie G.m.b.H. | WorléeKyd B 845 70% Xylene is a medium oil, very fast drying alkyd resin based on cotton seed and soya oils. It is designed for the production of high quality air and heat drying industrial enamels and car repair enamels. Due to the very good properties, ...view more WorléeKyd B 845 70% Xylene is a medium oil, very fast drying alkyd resin based on cotton seed and soya oils. It is designed for the production of high quality air and heat drying industrial enamels and car repair enamels. Due to the very good properties, W´Kyd B 845 is used as a binder for high quality industrial enamels, radiator, dipping and flow coating paints and enamels for trucks, touring cars, omnibuses, tractors and agricultural equipment. W´Kyd B 845 can also be used for nitro cellulose combinations and for air- and heat drying primers with very good elasticity. view less | |
| WorléeKyd B 850 | Worlée-Chemie G.m.b.H. | WorléeKyd B 850 is a medium oil, fast drying alkyd resin used for the production of high quality air and heat drying industrial, automobile, and radiator enamels. This grade has a non volatile content of 55% ± 1. Because of its very quick drying and extre...view more WorléeKyd B 850 is a medium oil, fast drying alkyd resin used for the production of high quality air and heat drying industrial, automobile, and radiator enamels. This grade has a non volatile content of 55% ± 1. Because of its very quick drying and extremely low tendency to yellowing, high quality air- and heat-drying industrial enamels can be produced with W´Kyd B 850. Also, W´Kyd B 850 is used for the production of car-repair and radiator enamels with very rapid flash-off and curing and high film build. view less | |
| WorléeKyd B 850 U | Worlée-Chemie G.m.b.H. | WorléeKyd B 850 U is a urethane modified medium oil alkdy resin, which is used for the manufacture of high quality industrial primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd B 850 U is compatible with the majority of medium-...view more WorléeKyd B 850 U is a urethane modified medium oil alkdy resin, which is used for the manufacture of high quality industrial primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd B 850 U is compatible with the majority of medium- and long oil air drying alkyd resins. It is also compatible with most of maleic and phenolic modified hard resins. This product exhibits white spirit dilutability, very fast drying and through drying. These advantageous drying properties enable fast tape resistance and good recoatability. It is an alternative to vinyl toluene alkyds. view less | |
| WorléeKyd B 865 | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 is a long oil alkyd resin used for decorative and house paints. This grade has a non volatile content of 60% ± 1. W´Kyd B 865 is compatible with most medium and long oil drying alkyds. This product very good drying properties for the manuf...view more WorléeKyd B 865 is a long oil alkyd resin used for decorative and house paints. This grade has a non volatile content of 60% ± 1. W´Kyd B 865 is compatible with most medium and long oil drying alkyds. This product very good drying properties for the manufacture of all sorts of gloss and high quality anti corrosive paints. view less | |
| WorléeKyd B 865 NV | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 NV is a long oil, low viscous alkyd resin for use in decorative and house paints. This grade has a non volatile content of 55% ± 1. Due to the low viscosity, it is possible to produce body rich paints which show high build, excellent flow ...view more WorléeKyd B 865 NV is a long oil, low viscous alkyd resin for use in decorative and house paints. This grade has a non volatile content of 55% ± 1. Due to the low viscosity, it is possible to produce body rich paints which show high build, excellent flow and high gloss. The good drying properties like fast tack and through drying allow a rational and efficient application. view less | |
| WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 160-200) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. | |
| WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1....view more WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. When paints or lacquers based on W´Kyd B 865 U are applied by conventional or airless spray, only water irrigated spraying cabinets are recommended as the spraying dust tends to self-ignite if it is dry. view less | |
| WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. W´Kyd ...view more WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. W´Kyd B 865 U is compatible with the majority of medium and long oil types of air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeKyd B 865 U (55% In White Spirit 145/195) | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U (55% In White Spirit 145/195) is a urethane modified long oil alkyd resin. It is mainly used as a binder for wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content o...view more WorléeKyd B 865 U (55% In White Spirit 145/195) is a urethane modified long oil alkyd resin. It is mainly used as a binder for wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. view less | |
| WorléeKyd B 865 U NV | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U NV is an isocyanate modified, long oil alkyd. This grade has a non volatile content of 60% ± 1. W´Kyd B 865 U nv is mainly recommended as the only binder or in combination with long oil alkyd resins for wood varnishes, parquet sealers, p...view more WorléeKyd B 865 U NV is an isocyanate modified, long oil alkyd. This grade has a non volatile content of 60% ± 1. W´Kyd B 865 U nv is mainly recommended as the only binder or in combination with long oil alkyd resins for wood varnishes, parquet sealers, primers, undercoat lacquers and fast drying top coats. view less | |
| WorléeKyd B 868 | Worlée-Chemie G.m.b.H. | WorléeKyd B 868 is a long oil alkyd based on drying vegetable fatty acids for high quality decorative and house paints. This grade has a non volatile content of 70% ± 1. W´Kyd B 868 is compatible with most medium and long oil drying alkyds, with most usua...view more WorléeKyd B 868 is a long oil alkyd based on drying vegetable fatty acids for high quality decorative and house paints. This grade has a non volatile content of 70% ± 1. W´Kyd B 868 is compatible with most medium and long oil drying alkyds, with most usual hard resins and also with raw and polymerised oils. W´Kyd B 868 is especially developed for high quality non-yellowing gloss paints. view less | |
| WorléeKyd B 870 (73%-77% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeKyd B 870 (73%-77% In Isoparaffin HC 170-200) is a long oil, low viscosity, drying alkyd for use in high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 2. Due to the low viscosity and very good pigment wetting proper...view more WorléeKyd B 870 (73%-77% In Isoparaffin HC 170-200) is a long oil, low viscosity, drying alkyd for use in high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 2. Due to the low viscosity and very good pigment wetting properties, the gloss paints based on W´Kyd B 870 have excellent brushability, high film build, very good levelling properties and high gloss and gloss retention. view less | |
| WorléeKyd B 870 (75% In Dearomat. HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd B 870 (75% In Dearomat. HC 160-200) is a long oil, low-viscosity drying alkyd based on vegetable fatty acids for high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 2. W´Kyd B 870 is compatible with most medium a...view more WorléeKyd B 870 (75% In Dearomat. HC 160-200) is a long oil, low-viscosity drying alkyd based on vegetable fatty acids for high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 2. W´Kyd B 870 is compatible with most medium and long oil drying alkyds, with most usual hard resins and also with raw and polymerised oils. W´Kyd B 870 is especially developed for high quality non-yellowing gloss paints, such as all sorts of decorative and trade sales paints. view less | |
| WorléeKyd B 870 (75% In DH 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd B 870 (75% In DH 180-220) is a long oil, low-viscosity drying alkyd based on vegetable fatty acids for high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 1. W´Kyd B 870 is compatible with most medium and long oi...view more WorléeKyd B 870 (75% In DH 180-220) is a long oil, low-viscosity drying alkyd based on vegetable fatty acids for high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 1. W´Kyd B 870 is compatible with most medium and long oil drying alkyds, with most usual hard resins and also with raw and polymerised oils. This product is especially developed for high quality non-yellowing gloss paints, such as all sorts of decorative and trade sales paints. view less | |
| WorléeKyd B 870 (75% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd B 870 (75% In White Spirit 145-195) is a long oil, low viscosity, drying alkyd for use in high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 1. W´Kyd B 870 is compatible with most medium and long oil drying alky...view more WorléeKyd B 870 (75% In White Spirit 145-195) is a long oil, low viscosity, drying alkyd for use in high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 1. W´Kyd B 870 is compatible with most medium and long oil drying alkyds. It is also compatible with raw and polymerised oils. W´Kyd B 870 is especially developed for high quality non-yellowing gloss paints, such as all sorts of decorative and trade sales paints. view less | |
| WorléeKyd BS 830 (60% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd BS 830 (60% In Dearomatized HC 160-200) is an air drying silicone modified alkyd resin for the manufacture of lasting protection coatings for steel construction. This grade has a non-volatile content of 60% ±1. High gloss paints based on W´Kyd B...view more WorléeKyd BS 830 (60% In Dearomatized HC 160-200) is an air drying silicone modified alkyd resin for the manufacture of lasting protection coatings for steel construction. This grade has a non-volatile content of 60% ±1. High gloss paints based on W´Kyd BS 830 have good drying and resistance properties and very good gloss retention. view less |
