| LAROMER® PA 9083 | BASF Dispersions & Resins | LAROMER PA 9083 is a methacrylated phosphoric acid ester. Due to the high acid value, this co-binder acts as an excellent adhesion promoter in UV curable coatings, printing inks, and overprint varnishes. | |
| Hostaphat® 1308 K | Clariant - Coatings & Construction Chemicals | Hostaphat® 1308 K is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used as an emulsifier in emulsion polymerization. | |
| POLIFEN 2090 | Benasedo | POLIFEN 2090 is suitable both for interior gold varnishes used both for food contact paints and for chemical resistant enamels used in the general industry field. The recommended stoving temperature ranges from 180°C to 220°C. Small amounts of phosphoric acid...view more POLIFEN 2090 is suitable both for interior gold varnishes used both for food contact paints and for chemical resistant enamels used in the general industry field. The recommended stoving temperature ranges from 180°C to 220°C. Small amounts of phosphoric acid catalyst are helpful to achieve a fully cured polymer. view less | |
| Dispersogen® 145 | Clariant - Coatings & Construction Chemicals | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales coloran...view more Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales colorants in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. view less | |
| METOLAT® 285 | Munzing Chemie | METOLAT® 285 is a colourless liquid wetting agent and defoamer for aqueous systems. It improves substrate wetting and penetration of coatings into wood. Main applications include wetting agent for alcaline systems, substrate wetting agent, manufacturing of phosphoric acid...view more METOLAT® 285 is a colourless liquid wetting agent and defoamer for aqueous systems. It improves substrate wetting and penetration of coatings into wood. Main applications include wetting agent for alcaline systems, substrate wetting agent, manufacturing of phosphoric acid (wet process), defoaming of quarternary ammonium compounds, and defoaming of acidic systems (e.g. pH 0.5). view less | |
| DISPERBYK®-145 | BYK | DISPERBYK®-145 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a phosphoric acid ester salt of a high molecular copolymer with pigment affinic groups. This product exhibits excellent compatibility with all commo...view more DISPERBYK®-145 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a phosphoric acid ester salt of a high molecular copolymer with pigment affinic groups. This product exhibits excellent compatibility with all commonly used paint binders. DISPERBYK®-145 is especially suitable for use in low polarity systems such as alkyd, acrylic, TPA, and epoxy resins. view less | Request Sample |
| Ottopol K-12T | Gellner Industrial, LLC | Ottopol K-12T is a cationic acrylic emulsion used as a rust converting primer. It converts the rust within minutes of the coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It does not contain tannic acid, oxime chelates, gallic acid, phosphates or phosphoric acid...view more Ottopol K-12T is a cationic acrylic emulsion used as a rust converting primer. It converts the rust within minutes of the coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It does not contain tannic acid, oxime chelates, gallic acid, phosphates or phosphoric acid. This product can also be used in stain blocking primers. view less | |
| CYCAT® XK 406 N | Allnex | Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion prop...view more Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems. view less | Request Sample |
| Hostaphat® 1306 | Clariant - Coatings & Construction Chemicals | Hostaphat® 1306 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used in the following applications: as emulsifier in emulsion ...view more Hostaphat® 1306 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used in the following applications: as emulsifier in emulsion polymerization, 0,5 – 1,5 % on monomers; as dispersing agent for pigments in aqueous dispersions, 10 – 30 % on pigments; and as wetting agent and detergents in vehicle and metal cleaning and textile finishing processes, general recommendation: 1 – 3 g/l. view less | |
| CYCAT® 296-9 | Allnex | CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ran...view more CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked. view less | Request Sample |
| Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) | GRACE | Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid catalysts. Pre-neutralisation of Cycat 500 and phosphoric acid...view more Water-borne Styrene-Acrylic Primer (Acronal) (Formulation #3.4) is a guideline formulation for general industrial applications. Acronal S760 is a self cross-linking styrene-acrylic dispersion which can be cured at room temperature by the addition of acid catalysts. Pre-neutralisation of Cycat 500 and phosphoric acid with AMP 95 and ammonia is necessary to ensure paint stability. The addition of AMP 95 also helps to heat stabilise the paint during milling. Higher PVC-values reduce the salt spray performance, and values around 20 to 30 vol.-% are suggested. Alternative fillers such as talcs, calcium carbonates (Millicarb B from Omya) or dolomites (Microdol extra from Norwegian Talcs) or combinations thereof can be used satisfactorily. view less | |
| HALOX® RC-980 | ICL Phosphate Specialty | HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It shows a stable freeze cycle. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid...view more HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It shows a stable freeze cycle. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid. The dosage level is 3-6% for water-based coatings and 7-10% for solvent-based coatings as supplied on total formula weight. The shelf life of HALOX® RC-980 is 1 year. view less | Request Sample |
| Polyester-Melamine Coil Coating Primer (Formulation #2.1) | GRACE | Polyester-Melamine Coil Coating Primer (Formulation #2.1) is a guideline formulation offered to highlight the anti-corrosive and adhesion performance of SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Dynapol L205 and Dynapol L208 are high molecular weight polyester resins widely used in coil coating primer applications for both building and domestic appliance applications. Cymel 350 is a typical melamine based crosslinker. The cure reponse within this formulation was controlled by the use of Silane A187 (Silane Ester), Epoxy blocked Phosphoric acid...view more Polyester-Melamine Coil Coating Primer (Formulation #2.1) is a guideline formulation offered to highlight the anti-corrosive and adhesion performance of SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Dynapol L205 and Dynapol L208 are high molecular weight polyester resins widely used in coil coating primer applications for both building and domestic appliance applications. Cymel 350 is a typical melamine based crosslinker. The cure reponse within this formulation was controlled by the use of Silane A187 (Silane Ester), Epoxy blocked Phosphoric acid (co-catalyst), EDBSA (sulphonic acid co-catalyst) and Halox 650 (Dicarboxylic acid). These components prevent the interaction of SHIELDEX® anti-corrosive pigments with the acid catalysts and any acidic functionality on the resins, thus ensuring maximum cure response. view less | |
| DISPERBYK®-111 | BYK | DISPERBYK®-111 is a wetting and dispersing additive for solvent-borne systems. It is composed of a copolymer with acidic groups. This product is designed primarily for usage in high solids and in solvent-free systems. Because of its anionic character, it ...view more DISPERBYK®-111 is a wetting and dispersing additive for solvent-borne systems. It is composed of a copolymer with acidic groups. This product is designed primarily for usage in high solids and in solvent-free systems. Because of its anionic character, it is ideal for acid catalyzed systems (such as coil coatings). DISPERBYK-111stabilizes inorganic pigments, and is particularly effective with titanium dioxide. It increases gloss, reduces haziness (especially in high rotation “minibell“ and / or other electrostatically applied systems) and dramatically reduces millbase viscosity. A combination with pigments stabilized by the DISPERBYK-160 family (see Data Sheet W200) is possible without any problems. view less | Request Sample |
| Maxemul 6106 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and el...view more Maxemul 6106 - Copolymerizable Anionic Surfactant is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. view less | |
| Maxemul 6112 - Copolymerizable Anionic Surfactant | Croda Coatings & Polymers | Maxemul 6112 - Copolymerizable Anionic Surfactant is a non-migratory, anionic surfactant for superior emulsion stability in latex systems and excellent moisture resistance or adhesive properties in coatings or psa's. | |
| DOUBLEMER® 9166 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 9166 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint...view more DOUBLEMER® 9166 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint color allows for versatile adhesion promotion with various kinds of UV coatings. This product appears as a dark liquid. Formulated UV/EB curable products containing DOUBLEMER® 9166 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. It is recommeneded for use in solder resist formulations, metal coatings. plastic coatings and etch resist applications. view less | |
| TEGO® Dispers 656 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 656 is a clear to hazy liquid, modified polyether with groups of high pigment affinity used as a pigment-wetting and dispersing additive. This product is primarily used for universal colorants and solventborne formulations. It is solvent- an...view more TEGO® Dispers 656 is a clear to hazy liquid, modified polyether with groups of high pigment affinity used as a pigment-wetting and dispersing additive. This product is primarily used for universal colorants and solventborne formulations. It is solvent- and APE-free and has the highest efficiency with inorganic pigments. It also stabilizes aluminum pigments and improves colorant acceptance of solventborne paints. view less | Request Sample |
| PAT-ADD DA 2250 | Patcham USA | PAT-ADD DA 2250 is a polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2250 contributes to optimization of the fillers, the dispersion process and product s...view more PAT-ADD DA 2250 is a polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2250 contributes to optimization of the fillers, the dispersion process and product stability. view less | Request Sample |
| Epoxy Coil Coating Primer (Formulation #2.2) | GRACE | Epoxy Coil Coating Primer (Formulation #2.2) is a formulation that utilizes SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Epikote 1007 and Epikote 1009 are standard epoxy resins used in coil coating primer applications. UFR 80 is a typical urea based crosslinker used in these applications. The cure response within this formulation was controlled by the use of Epoxy blocked Phosphoric acid...view more Epoxy Coil Coating Primer (Formulation #2.2) is a formulation that utilizes SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Epikote 1007 and Epikote 1009 are standard epoxy resins used in coil coating primer applications. UFR 80 is a typical urea based crosslinker used in these applications. The cure response within this formulation was controlled by the use of Epoxy blocked Phosphoric acid (co-catalyst) and Halox 650 (dicarboxylic-acid co-catalyst). These components prevent the interaction of SHIELDEX® anti-corrosive pigment with the acid catalysts and any acid funtionality on the resin systems, thus ensuring maximum cure response. The SHIELDEX® C 303 anti-corrosive pigment containing epoxy coil primer was applied on Bonder 1303 (ex Chemetall) and Granodine C 108 (ex Henkel) treated galvanised steel test panels. The primer was applied by bar coater to a dry film thickness of 5 – 7 microns. Cure was to a peak metal temperature (PMT) of 216 – 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 – 241 °C. view less | |
| TARGON® B1 | ICL Phosphate Specialty | TARGON® B1 is used in bitumen cold applications to accelerate the reaction film on the surface. | Request Sample |
| LOPON® DV | ICL Phosphate Specialty | LOPON® DV is a corrosion inhibitor for emulsion paints, premium plasters and other aqueous building paints. For binding iron ions the recommended dosage is 5.0 – 7.5 mg LOPON® DV per mg iron. It is a disodium phosphate. | Request Sample |
| NOVINOX ACE 20 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX ACE 20 is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coating. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. NOVINOX ...view more NOVINOX ACE 20 is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coating. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. NOVINOX ACE 20 is a modified Zinc Phosphate designed to be non toxic for the environment. As it contains more than 90% of PZ20, the replacement of Zinc Phosphate by NOVINOX ACE 20 in formulations is straightforward. Like PZ20, it is compatible with a wide range of solvent and water based resins. view less | Request Sample |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...view more HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...view more HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. view less | Request Sample |
| NOVINOX PC01 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PC01 is a Calcium Phosphate used as an anticorrosion inhibiting pigment in DYI coatings. It is a stable and non-hygroscopic white powder, it is easily dispersed. NOVINOX PC01 may be used in formulations for Environmentally-friendly coatings. | Request Sample |
| NOVINOX PAT15 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAT15 is a corrosion inhibiting pigment developed to formulate chrome free coil coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PAT15 is compatible with PU and PE/melamine systems designed for Coil...view more NOVINOX PAT15 is a corrosion inhibiting pigment developed to formulate chrome free coil coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PAT15 is compatible with PU and PE/melamine systems designed for Coil Coatings. NOVINOX PAT15 is usually used in association with NOVINOX XCA02. view less | Request Sample |
| NOVINOX PAT30 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAT30 is a corrosion inhibiting pigment that allows the formulation of paints without the label toxic for the environment. It is a stable and non-hygroscopic white powder, and it is easily dispersed. Thanks to a higher solubility than standard ...view more NOVINOX PAT30 is a corrosion inhibiting pigment that allows the formulation of paints without the label toxic for the environment. It is a stable and non-hygroscopic white powder, and it is easily dispersed. Thanks to a higher solubility than standard Zinc Phosphate, NOVINOX PAT30 will be more reactive in the initial stage of corrosion. NOVINOX PAT30 is compatible with solvent and water based resins. It shows the best performance in solvent borne Alkyd systems. view less | Request Sample |
| Delaphos® 4 | Delaphos | Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...view more Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. view less | |
| Delaphos® 2 | Delaphos | Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...view more Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. view less | |
| Delaphos® 2M | Delaphos | Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...view more Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. view less | |
| NOVINOX PPS10 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PPS10 is a Zinc Strontium Calcium Phosphosilicate designed to offer a better protection against corrosion than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PPS10 has been specially f...view more NOVINOX PPS10 is a Zinc Strontium Calcium Phosphosilicate designed to offer a better protection against corrosion than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PPS10 has been specially formulated to take advantage of the complementary actions of each components of the pigment. It is compatible with a wide range of solvent and water based resins. view less | Request Sample |
| HALOX® XTAIN® A | ICL Phosphate Specialty | HALOX® XTAIN® A by ICL is a multi-valent tannin stain-inhibiting pigment. It is designed for exterior architectural wood coatings. It is a barium & antimony-free, white, non-refractive aluminum zirconium phosphosilicate-based inhibitor used in protective ...view more HALOX® XTAIN® A by ICL is a multi-valent tannin stain-inhibiting pigment. It is designed for exterior architectural wood coatings. It is a barium & antimony-free, white, non-refractive aluminum zirconium phosphosilicate-based inhibitor used in protective coating systems. It provides a high level of performance and compatibility in a variety of resin systems such as styrene-butadiene latexes, acrylic latexes, vinyl acrylic latexes, and solvent-based alkyds. It is also used in water-based systems. It is effective at very low loading levels. The dosage level of HALOX® XTAIN® A is 1-3% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| AGITAN® DF 6421 | Munzing Chemie | AGITAN® DF 6421 is a liquid colorless silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and has good versatility and dispersion in most organic solvents. It is commonly used in adhesives and printing inks...view more AGITAN® DF 6421 is a liquid colorless silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and has good versatility and dispersion in most organic solvents. It is commonly used in adhesives and printing inks. view less | |
| Hydroshine WS 1011 | ECKART America | Hydroshine WS 1011 is a water- and alcohol compatible effect pigment dispersion based on highly brilliant PVD-aluminum-pigments in isopropyl alcohol. | |
| Yipin® Zinc Phosphate 409-1 | Yipin Pigments, Inc. | Yipin® Zinc Phosphate 409-1 is a white zinc phosphate pigment in powder form. It has zinc phosphate content of at least 45%. This product can be used in coating applications. | |
| NOVINOX ACE110 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX ACE110 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX ACE110 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate ...view more NOVINOX ACE110 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX ACE110 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate for Coil Coatings. Compatible with PU and PE/Melamine systems, NOVINOX ACE110 gives excellent anticorrosive performance in Coil Coatings applied to HDGS, Galfan, Galvalume and CRS. view less | Request Sample |
| HEUCOPHOS® ZPA | Heubach Ltd | HEUCOPHOS® ZPA is a zinc aluminum orthophosphate hydrate that has a higher phosphate content than zinc phosphate. The absence of basic components in the pigment makes it a versatile anticorrosive pigment for many applications. This product has a loss on i...view more HEUCOPHOS® ZPA is a zinc aluminum orthophosphate hydrate that has a higher phosphate content than zinc phosphate. The absence of basic components in the pigment makes it a versatile anticorrosive pigment for many applications. This product has a loss on ignition at 600°C of 9.0-12.5%, a pH level of 5.5-6.5, and a density of tip. 3.1g/cm^3. view less | Request Sample |
| HEUCOPHOS® ZPO | Heubach Ltd | HEUCOPHOS® ZPO is an organic modified basic zinc orthophosphate hydrate that shows excellent protective behavior in many binder systems, such as alkyd resins and physically drying systems, due to its special organic modification fixed on the particle surf...view more HEUCOPHOS® ZPO is an organic modified basic zinc orthophosphate hydrate that shows excellent protective behavior in many binder systems, such as alkyd resins and physically drying systems, due to its special organic modification fixed on the particle surface. This product has an oil absorption value of tip. 20g/100g, a sieve residue (30 microns) of max. 0.01, and an organic content of tip. 0.3%. view less | Request Sample |
| HEUCOPHOS® ZAM-Plus | Heubach Ltd | HEUCOPHOS® ZAM-Plus is an organic modified zinc aluminum molybdenum orthophosphate hydrate. It contains WSA (Wide Spectrum Anticorrosives) for application in both conventional and, in particular, modern resin systems. This product has a density of tip. 3....view more HEUCOPHOS® ZAM-Plus is an organic modified zinc aluminum molybdenum orthophosphate hydrate. It contains WSA (Wide Spectrum Anticorrosives) for application in both conventional and, in particular, modern resin systems. This product has a density of tip. 3.7g/cm^3, a contuctivity of max. 300μS/cm, and a pH value of 6.0-7.5. view less | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...view more HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| NOVINOX PZ02 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PZ02 is an organically modified basic Zinc Phosphate developed to be more reactive than standard Zinc Phosphate in PU and alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. The o...view more NOVINOX PZ02 is an organically modified basic Zinc Phosphate developed to be more reactive than standard Zinc Phosphate in PU and alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. The organic activator provides a higher solubility of the pigment in the initial stages of corrosion leading to a higher reactivity and protection. view less | Request Sample |
| PHOSPHINOX PZ06 | SNCZ Société Nouvelle des Couleurs Zinciques | PHOPHINOX PZ06 is a basic Zinc Phosphate designed to be more reactive than standard Zinc Phosphate in PU and Alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. This product is an alterna...view more PHOPHINOX PZ06 is a basic Zinc Phosphate designed to be more reactive than standard Zinc Phosphate in PU and Alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. This product is an alternative to chromates, for instance it successfully replaces chromates in wash primers. view less | Request Sample |
| ZINC PHOSPHATE PZ20 | SNCZ Société Nouvelle des Couleurs Zinciques | ZINC PHOSPHATE PZ20 is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coating. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed....view more ZINC PHOSPHATE PZ20 is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coating. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. Thanks to its low solubility, ZINC PHOSPHATE PZ20 is compatible with a wide range of solvent and water based resins. view less | Request Sample |
| Zinc Phosphate PZW2 | SNCZ Société Nouvelle des Couleurs Zinciques | Zinc Phosphate PZW2 is a corrosion inhibiting pigment suitable for a wide range of applications. It is an easily dispersed white powder with a low tinting strength. Thanks to its low solubility, Zinc Phosphate PZW2 is compatible with a wide range of solve...view more Zinc Phosphate PZW2 is a corrosion inhibiting pigment suitable for a wide range of applications. It is an easily dispersed white powder with a low tinting strength. Thanks to its low solubility, Zinc Phosphate PZW2 is compatible with a wide range of solvent and water based resins. view less | Request Sample |
| HALOX® SZP-395 | ICL Phosphate Specialty | HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety ...view more HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin-film applications (<1 mil or 25 μm). The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| Phosflex® 362 | Univar Solutions | Phosflex® 362 is a highly efficient plasticizer for PVC, with very good low-temperature flexibility and excellent solvating properties for fast fusion. One of the unique characteristics of Phosflex® 362 is its ability to reduce flammability while also red...view more Phosflex® 362 is a highly efficient plasticizer for PVC, with very good low-temperature flexibility and excellent solvating properties for fast fusion. One of the unique characteristics of Phosflex® 362 is its ability to reduce flammability while also reducing smoke. view less | Request Sample |
| NOVINOX ACE 36W | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX ACE 36W is a an eco-friendly Zinc phosphosilicate used as a corrosion inhibitor. Without safety labels, it is the ecofriendly alternative to Novinox PPS10. It is suitable for solventborne and waterborne resin systems. It has been specifically desi...view more NOVINOX ACE 36W is a an eco-friendly Zinc phosphosilicate used as a corrosion inhibitor. Without safety labels, it is the ecofriendly alternative to Novinox PPS10. It is suitable for solventborne and waterborne resin systems. It has been specifically designed to be a top performance anticorrosion pigment in waterborne systems such as alkyds and acrylics. view less | Request Sample |
| Mixed Chromium Phosphate | McGean-Rohco, Inc. | Mixed Chromium Phosphate is a clear, green solution. Uses include conversion coatings, corrosion inhibitors, catalysts and synthesis. | |
| HEUCOPHOS® ZMP | Heubach Ltd | HEUCOPHOS® ZMP is a basic zinc molybdenum orthophosphate hydrate. Excellent results have been achieved by applying this anticorrosive pigment in water based coating systems using one-part polyurethanes. This product has a pH level of 5.5-7.5, a density of...view more HEUCOPHOS® ZMP is a basic zinc molybdenum orthophosphate hydrate. Excellent results have been achieved by applying this anticorrosive pigment in water based coating systems using one-part polyurethanes. This product has a pH level of 5.5-7.5, a density of typ. 4.0g/cm^3, and a conductivity of max. 250μS/cm. view less | Request Sample |
| Phosphinal PZ04 | SNCZ Société Nouvelle des Couleurs Zinciques | Phosphinal PZ04 is a Zinc Aluminium Phosphate developed to give higher and longer anticorrosion performance to the epoxy coatings than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily d...view more Phosphinal PZ04 is a Zinc Aluminium Phosphate developed to give higher and longer anticorrosion performance to the epoxy coatings than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. Phosphinal PZ04 is suitable for a wide range of solvent and water based resins. This pigment is specifically adapted to Epoxy resins. view less | Request Sample |
| NOVINOX ACE 24 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX ACE 24 is a corrosion inhibiting pigment composed of modified Zinc Aluminium Phosphate. It has technical performance similar to Phosphinal PZ04, with a higher corrosion resistance than a standard Zinc Phosphate. It is suitable for solvent-based ep...view more NOVINOX ACE 24 is a corrosion inhibiting pigment composed of modified Zinc Aluminium Phosphate. It has technical performance similar to Phosphinal PZ04, with a higher corrosion resistance than a standard Zinc Phosphate. It is suitable for solvent-based epoxy amine primers, water-based styrene acrylic primers, and water-based alkyd emulsions. view less | Request Sample |
| TEGO® Dispers 655 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 655 is pigment-wetting and dispersing additive. It is a clear to a slighlty hazy brownish liquid modified polyether with groups of high pigment affinity. This product is used for universal colorants, waterborne, solventborne, radiation-curin...view more TEGO® Dispers 655 is pigment-wetting and dispersing additive. It is a clear to a slighlty hazy brownish liquid modified polyether with groups of high pigment affinity. This product is used for universal colorants, waterborne, solventborne, radiation-curing formulations. TEGO® Dispers 655 stabilizes aluminum pigments and improves colorant acceptance of solventborne paints. It has the highest viscosity reduction with inorganic pigments and fillers and good reduction with organic and carbon blacks. It also has good color intensity/gloss with inorganic pigments and fillers. view less | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...view more HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| DISPERBYK®-110 | BYK | DISPERBYK®-110 is a wetting and dispersing additive for solvent-borne systems. It is composed of a solution of a copolymer with acidic groups. This product is suitable for stabilizing inorganic pigments, especially titanium dioxide, and strongly reduces m...view more DISPERBYK®-110 is a wetting and dispersing additive for solvent-borne systems. It is composed of a solution of a copolymer with acidic groups. This product is suitable for stabilizing inorganic pigments, especially titanium dioxide, and strongly reduces millbase viscosity. Because of its anionic character, it is ideal for acid-catalyzed systems (such as coil coatings). It reduces haze in inorganic pigmented coatings when application occurs by electrostatic spraying. A combination with pigments stabilized by the DISPERBYK-160 family (see Data Sheet W200) is possible without any problems. view less | Request Sample |
| RA-120W Release Coat | Mayzo, Inc. | RA-120W Release Coat is a water-soluble fluorochemical. It has no adverse effects on color and improves release characteristics. RA-120W Release Coat is used in tapes and coatings. | |
| SHINEDECOR 2000 | ECKART America | SHINEDECOR 2000 is a waterbased pigment concentrate on based of aluminum pigment. | |
| SHINEDECOR 3500 | ECKART America | SHINEDECOR 3500 is a waterbased pigment concentrate on based of aluminum pigment. | |
| SHINEDECOR 5000 | ECKART America | SHINEDECOR 5000 is a waterbased pigment concentrate on based of aluminum pigment. | |
| PAT-ADD DA 2257 | Patcham USA | PAT-ADD DA 2257 is a solution of polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2257 contributes to optimization of the filler dispersion process and sta...view more PAT-ADD DA 2257 is a solution of polymeric wetting agent for use in thermosets, especially where high levels of filler is prescribed. Excellent wetting as accomplished by PAT-ADD DA 2257 contributes to optimization of the filler dispersion process and stability. view less | Request Sample |
| FOAMSTAR® PB 2706 | BASF Formulation Additives | FOAMSTAR® PB 2706 is an efficient defoamer for the manufacture of construction chemicals products. Because of its excellent foam-suppressing effect, FOAMSTAR® PB 2706 is generally added very early in the work process to prevent foaming right from the outs...view more FOAMSTAR® PB 2706 is an efficient defoamer for the manufacture of construction chemicals products. Because of its excellent foam-suppressing effect, FOAMSTAR® PB 2706 is generally added very early in the work process to prevent foaming right from the outset in the manufacture of construction chemicals products. view less | |
| NOVINOX PAZ | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOV...view more NOVINOX PAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAZ is suitable with a wide range of resins, both solvent and water based. NOVINOX PAZ is also an excellent alternative to Strontium chromate in Coil Coatings. view less | Request Sample |
| NOVINOX ePAZ | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX ePAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. This product is suitable for a wi...view more NOVINOX ePAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder, and it is easily dispersed. This product is suitable for a wide range of solvent and water-based resins. NOVINOX ePAZ is also an excellent alternative to chromate in Coil Coatings, SC epoxy and alkyd resin systems. view less | Request Sample |
| TEGO® Foamex 20 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 20 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It is recommended for clear and pigmented waterborne formu...view more TEGO® Foamex 20 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It is recommended for clear and pigmented waterborne formulations. view less | Request Sample |
| TEGO® Foamex 24 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 24 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It can be used in clear and pigmented waterborne coatings. | Request Sample |
| HEUCOPHOS® ZCP-Plus | Heubach Ltd | HEUCOPHOS® ZCP-Plus is a zinc calcium strontium aluminum orthophosphate silicate hydrate. This product contains WSA (Wide Spectrum Anticorrosives) and is ideal for application in both conventional and, in particular, modern resin systems. It has a Zinc as...view more HEUCOPHOS® ZCP-Plus is a zinc calcium strontium aluminum orthophosphate silicate hydrate. This product contains WSA (Wide Spectrum Anticorrosives) and is ideal for application in both conventional and, in particular, modern resin systems. It has a Zinc as ZnO content of 35.5-39.0%, a loss on ignition at 600°C of 5.5-10.0, and a conductivity of max. 100μS/cm. view less | Request Sample |
| Hydroshine WS 1001 | ECKART America | Hydroshine WS 1001 is a water- and alcohol compatible effect pigment dispersion based on highly brilliant PVD-aluminum-pigments in butyl glycol. | |
| GENORAD* 41 | Rahn USA Corp. | GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations fro...view more GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations from 1% to 5%. view less | Request Sample |
| HALOX® BW-100 | ICL Phosphate Specialty | HALOX® BW-100 by ICL is a low-cost tannin stain-inhibiting pigment used in exterior architectural wood coatings. It is barium phosphosilicate-based, non-refractive grade used in protective coating systems. It provides minimal hiding with decent exterior d...view more HALOX® BW-100 by ICL is a low-cost tannin stain-inhibiting pigment used in exterior architectural wood coatings. It is barium phosphosilicate-based, non-refractive grade used in protective coating systems. It provides minimal hiding with decent exterior durability. It provides performance and compatibility in a variety of resin systems such as acrylic latexes, vinyl acrylic latexes, styrenated acrylic latexes, and solvent-based alkyds. It is suitable for water-based systems. It is effective in high PVC alkyd primers and demonstrates excellent performance. The dosage level of HALOX® BW-100 is 5-10% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| TEGO® Foamex 822 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 822 is a defoamer emulsion with a broad application range, easy incorporation, and good long-term effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 822 has st...view more TEGO® Foamex 822 is a defoamer emulsion with a broad application range, easy incorporation, and good long-term effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 822 has strong long-term defoaming. It is well suited for clearcoats, waterborne, and sensitive systems. It is highly suitable for brush/roller applications, compressed air spraying, and dip, flow, and curtain coating. It is also suitable for airless spraying and flexo/gravure printing. view less | Request Sample |
| TEGO® Foamex 825 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 825 is an effective defoamer emulsion with high compatibility. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 825 has strong defoaming characteristics for clear coat, pig...view more TEGO® Foamex 825 is an effective defoamer emulsion with high compatibility. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 825 has strong defoaming characteristics for clear coat, pigmented, and waterborne systems as well as for polyurethane-acrylate binders. It is highly suited for compressed air spraying and dip coating, flow coating, and curtain coating. It is also suitable for airless spraying, flooring, and brush.roller applications. view less | Request Sample |
| TEGO® Dispers 686 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 686 is a pigment-wetting and dispersing additive. It is especially suitable to prepare solventborne concentrates of matting agents. The dried concentrate of matting agent can be re-dispersed at low shear force. | Request Sample |
| EFKA® FA 4611 | BASF Formulation Additives | EFKA® FA 4611 is a solvent-free dispersing agent, which shows excellent stabilization of inorganic pigments, notably TiO2. It achieves strong reduction in mill-base viscosity, even with high pigment and filler loadings, it demonstrates increased hiding po...view more EFKA® FA 4611 is a solvent-free dispersing agent, which shows excellent stabilization of inorganic pigments, notably TiO2. It achieves strong reduction in mill-base viscosity, even with high pigment and filler loadings, it demonstrates increased hiding power, and is suitable for high gloss systems. EFKA® FA 4611 is appropriate for solvent-based and solvent-free Industrial, OEM/Refinish, Automotive and Wood Coatings, Composites, and Printing Inks. view less |
