Speedcure DMB | Sartomer Americas | SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
Altor™ 201 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 201 polyaspartic ester is a low-color, solvent-free amine-functional reactive partner for polyisocyanates. This low viscosity amine functional resin was developed for use in the formulation of high solids two-component polyurethane-urea coatings. | |
DABCO® DC 1 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 1 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. | |
B-100 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | B-100 Polyether Amine colorless to pale yellow liquid which permits a slight haze. This product has an average molecular weight of about 1000 and a flash point of 193.3 degrees Celsius. B-100 Polyether Amine acts as a dispersant in coatings and inks. | |
Andisil 1170 Silane | AB Specialty Silicones | Andisil 1170 Silane is a bis(trimethoxysilylpropyl)amine amino silane. It is used as an adhesive and sealant. | |
Speedcure EMK | Sartomer Americas | SpeedCure EMK is a Norrish Type II photoinitiator of the benzophenone family and an amine synergist, with absorption maxima at 250 and 378 nm. SpeedCure EMK provides high reactivity and depth cure when used at 0.5-5 wt% and combined with an amine synergis...view more SpeedCure EMK is a Norrish Type II photoinitiator of the benzophenone family and an amine synergist, with absorption maxima at 250 and 378 nm. SpeedCure EMK provides high reactivity and depth cure when used at 0.5-5 wt% and combined with an amine synergist in highly pigmented UV and LED curable formulations. view less | |
DryXtra – Chelating Agent | Huntsman Pigments & Additives | DryXtra is a primary amine based chelating agent for solvent and water borne alkyds and unsaturated polyester resin. It is especially formulated to be highly active in combination with Nuodex DryCoat but can be used to enhance the performance of tradition...view more DryXtra is a primary amine based chelating agent for solvent and water borne alkyds and unsaturated polyester resin. It is especially formulated to be highly active in combination with Nuodex DryCoat but can be used to enhance the performance of traditional Manganese driers. view less | |
DABCO® DC 2 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reac...view more DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reactive than DABCO® DC 1. view less | |
GENOMER* 3430 | Rahn USA Corp. | GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured w...view more GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less | Request Sample |
GENOMER* 4514 | Rahn USA Corp. | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...view more GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less | Request Sample |
CN383 | Sartomer Americas | CN383 is a monofunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odor, both at press side and in the cured film, and reduced ...view more CN383 is a monofunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odor, both at press side and in the cured film, and reduced blooming. view less | |
Bis-[3-(Trimethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(Trimethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
Bis-[3-(Triethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(Triethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
SONGSORB® CS 944 | SONGWON Industrial Group | SONGSORB® CS 944 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications. | |
Reze-Meric™-B-9890-21-35 | US Polymers - Accurez LLC | Reze-Meric™-B-9890-21-35 is a high molecular weight film forming amine-functional thermoplastic polyurethane. | Request Sample |
Reze-Meric™-B-9896-21-35 | US Polymers - Accurez LLC | Reze-Meric™-B-9896-21-25 is a high molecular weight film forming amine-functional thermoplastic polyurethane. | Request Sample |
Doublecure® 225 | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 225 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this yellow liquid is used in combination with other photoinitiators, an increase...view more Doublecure® 225 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this yellow liquid is used in combination with other photoinitiators, an increase in cured speed, especially at the surface, can be observed. Other advantages include light color, low viscosity, improved stability and low volatility. view less | |
Doublecure® 115 | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 115 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this product is used in combination with other photoinitiators an increase in cur...view more Doublecure® 115 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this product is used in combination with other photoinitiators an increase in cured speed, especially at the surface, can be observed, Besides the improved stability, other advantages of Doublecure® 115 are including light color, low viscosity and low volatility. Formulated UV/EB curable products containing Doublecure® 115 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. This product is a clear yellowish liquid with a slight amine smell. view less | |
2K Epoxy Primer Surfacer For Trains (Formulation #L00046.1) | Hoffmann Mineral | 2K Epoxy Primer Surfacer For Trains is a water-based solid, epoxy resin, and hydrophobic amine. It features anti-corrosion and good sandability. | |
KBE-9103 | Shin-Etsu Silicones of America | KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9...view more KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9103 is a protected amine that does not react with most epoxides, acidic groups, or phenols. However, in the presence of moisture, the ketimine functional group readily generates a free primary amine that will react with epoxides, acidic groups, and phenols. The latent reactivity of this protected amine makes KBE-9103 an ideal coupling agent for many one-component systems in which exposure to ambient moisture quickly and easily provides a highly reactive coupling agent. view less | |
Luna-tribo K T405 | DKSH | Luna-tribo K T405 is a masterbatch of an additive in a carboxylated polyester to enhance tribochargeability in powder coatings. Active content: 5% of a hindered tertiary amine. | Request Sample |
EPOTUF® 37-611 | Polynt Composites | EPOTUF® 37-611 is a 100% solids modified aliphatic amine curing agent for room-temperature curing of EPOTUF® epoxy resins. | |
Desmophen® NH 1420 | Covestro | Desmophen® NH 1420 resin is a solvent-free, amine-functional reactive partner for polyisocyanates, and is a low viscosity amine functional resin developed for use in the formulation of high solids two-component polyurethane/urea coatings. Desmophen® NH 14...view more Desmophen® NH 1420 resin is a solvent-free, amine-functional reactive partner for polyisocyanates, and is a low viscosity amine functional resin developed for use in the formulation of high solids two-component polyurethane/urea coatings. Desmophen® NH 1420 resin may be used by itself or as a blend with hydroxy-functional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/urea clearcoats. view less | |
Docure KH-819 | Kukdo Chemical Co., Ltd. | Docure KH-819 is a cycloaliphatic amine modified curing agent for use with epoxy resins. It has very low viscosity in epoxy systems. KH-819 gives very rapid curing rate at ambient and low temperature. It can be used in formulations with good water spot re...view more Docure KH-819 is a cycloaliphatic amine modified curing agent for use with epoxy resins. It has very low viscosity in epoxy systems. KH-819 gives very rapid curing rate at ambient and low temperature. It can be used in formulations with good water spot resistance and resistance to amine blush and chemical resistance. It is well suited for use in the production of solvent free coatings with good chemical resistance. view less | |
EBECRYL® P116 | Allnex | EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, esp...view more EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, especially at the surface, can be realized. It is recommended for use in: overprint varnishes, wood fillers and top coats, and clear coatings on paper and plastics. view less | Request Sample |
GENOMER* 4515 | Rahn USA Corp. | GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printin...view more GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printing. GENOMER* 4515 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less | Request Sample |
Doublecure® 645 | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 645 is a special tertiary amine acrylate monomer, and is particularly well suited for high gloss UV curable varnishes on paper and board. It also provides very fast surface curing to overcome the oxygen-inhibited problem when in combination wi...view more Doublecure® 645 is a special tertiary amine acrylate monomer, and is particularly well suited for high gloss UV curable varnishes on paper and board. It also provides very fast surface curing to overcome the oxygen-inhibited problem when in combination with Benzophenone. This product is a light yellow liquid. The haze or gloss loss resulting from the migration of the common tertiary amine can be improved by use of Doublecure® 645. view less | |
EBECRYL® 85 | Allnex | EBECRYL® 85 is a low viscosity amine modified polyether acrylate that provides high reactivity in low extractable, low odor energy curable coatings and inks. Coatings and inks based on EBECRYL® 85 exhibit a low odor after UV or EB curing. | Request Sample |
Doublecure® OPD | Double Bond Chemical Ind., Co., Ltd. | Doublecure® OPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure® ITX and EMK. T...view more Doublecure® OPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure® ITX and EMK. This product is a pale yellow liquid with a faintly amine odor. Doublecure® OPD is a widely utilized photoactivator, which used in conjunction with a photosensitizer is converted by energy transfer into free radicals. This action can initiate photopolymerization of suitable resin formulations. view less | |
BYK®-081 | BYK | BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly...view more BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly suitable for high solid alkyd systems in the architectural coatings sector. The additive shows good compatibility with clear coatings. BYK®-081 is not suitable for aqueous systems that contain little or no organic solvent as co-solvent. view less | Request Sample |
Desmophen® NH 1520 | Covestro | Desmophen® NH 1520 resin is an amine-functional used as a reactive partner for polyisocyanates. Desmophen® NH 1520 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea co...view more Desmophen® NH 1520 resin is an amine-functional used as a reactive partner for polyisocyanates. Desmophen® NH 1520 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® NH 1520 resin may be used by itself or as a blend with hydroxyfunctional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/ urea clearcoats. view less | |
Amicure® DBU-E | Evonik Operations GmbH, BL Crosslinkers | Amicure® DBU-E is a high-purity, electronic grade of diazabicyclo-undecene. Highly efficient tertiary amine accelerator. Used in electrical encapsulation and transfer moulding powders. | Request Sample |
JONCRYL® 538-A | BASF Dispersions & Resins | JONCRYL 538-A is an amine salt of modified acrylic copolymer. Its uses include polymers for inks, varnishes or coatings. This product is a straw yellow liquid with an ammonia-like odour. | |
SONGSORB® CS 770 | SONGWON Industrial Group | SONGSORB® CS 770 is a solid light stabilizer of the hindered amine family (HALS), with low molecular weight and it is suitable for applications demanding particularly high light stability. | |
713 | GIMEL Technical Materials | 713 is a difunctional amine-modified epoxy acrylate used in inks, wood coatings, and vacuum metallization coatings.It has a fast curing response, good adhesion, and excellent flexibility. | Request Sample |
EBECRYL® 3600 | Allnex | EBECRYL® 3600 is an amine modified epoxy acrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3600 cured by UV or electron beam (EB) demonstrate high gloss and hardness combined with excellent chemical r...view more EBECRYL® 3600 is an amine modified epoxy acrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3600 cured by UV or electron beam (EB) demonstrate high gloss and hardness combined with excellent chemical resistance. The amine modification can also improve adhesion to plastics. It is recommended for use in: clear coatings for paper and plastic, wood topcoats, wood fillers and sealers, and screen inks and coatings view less | Request Sample |
ADDAPT® Anticor™ C 6 | ADDAPT Chemicals BV | ADDAPT® Anticor™ C 6 is a proprietary mixture of modified monophosphate and diphosphate esters. It is used as a metal passivator in lacquers and paints. This product is BTA, TTA, and amine free. | |
ROSKYDAL® E 65 | Allnex | ROSKYDAL® E 65 is an unsaturated polyester resin, which is used as a flexibilizing resin for wax-free polyester and amine-accelerated resins used in the formulation of knifing and spray fillers. | Request Sample |
Chicure® 764 | Double Bond Chemical Ind., Co., Ltd. | Chicure® 764 is an ammonium salt catalyst that decomposes to tertial amine during high temperature processes, reducing the reaction energy of carboxylic with epoxied group, lowering curing temperature. | |
POLYCAT® SA 20 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 20 is a DBT-free low emission gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. | |
Desmophen® NH 1521 | Covestro | Desmophen® NH 1521 resin is an amine-functional reactive partner for polyisocyanates, supplied with 10% n-butyl acetate. Desmophen® NH 1521 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component ...view more Desmophen® NH 1521 resin is an amine-functional reactive partner for polyisocyanates, supplied with 10% n-butyl acetate. Desmophen® NH 1521 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® NH 1521 resin may be used by itself or as a blend with hydroxyfunctional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/ urea clearcoats. view less | |
NACURE® 3327 | King Industries, Inc. | NACURE® 3327 appears as a clear transparent dark liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that has been created to provide enganced solubility when compared to other amine blocked DNNDSA stimulants. NACURE 33...view more NACURE® 3327 appears as a clear transparent dark liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that has been created to provide enganced solubility when compared to other amine blocked DNNDSA stimulants. NACURE 3327 offers a combination of package stability and cure response. This product has good adhesion, solubility, and corrosion resistance. It is applied to metal decorating coil coatings. electrostatic spray, and general industrials. It is soluble in alcohol, water, glycols, and glycol ethers. view less | |
NACURE® 2558 | King Industries, Inc. | NACURE® 2558 is a partially amine counterbalanced para-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid. It mixes a higher boiling solvent with a higher temperature dissociating amine to create a stimulant that is especially ef...view more NACURE® 2558 is a partially amine counterbalanced para-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid. It mixes a higher boiling solvent with a higher temperature dissociating amine to create a stimulant that is especially effective in controlling wrinkling, popping and blistering in high solids coatings. It is soluble in alcohols, water, glycols, glycol ethers, and is insoluble in aliphatic and aromatic hydrocarbons, esters, and ketones. This product can be applied in automotive finishes, waterborne coatings, coil coatings, and general industrials. view less | |
Doublecure® EMK | Double Bond Chemical Ind., Co., Ltd. | Doublecure® EMK is both an aromatic ketone and a tertiary amine. It could act both as a photosensitizer and an amine synergist and would be expected to be an independent complete initiating system. Doublecure® EMK has a strong absorption between 350 to 40...view more Doublecure® EMK is both an aromatic ketone and a tertiary amine. It could act both as a photosensitizer and an amine synergist and would be expected to be an independent complete initiating system. Doublecure® EMK has a strong absorption between 350 to 400 nm which makes it most suitable for pigmented and black UV coating. This product is is a photo-grade EMK which bears bright yellow color and is more resistant to oxidation by exposure in air than the most commercially available EMK. view less | |
ANCAMINE® 2489 CURING AGENT | Evonik Operations GmbH, BL Crosslinkers | Modified cycloaliphatic amine offering low color and low viscosity. Allows higher filler loading and/or a reduced need for diluents. Provides very rapid cure and high gloss and blush resistance. | Request Sample |
ADDAPT® Anticor™ C 10N | ADDAPT Chemicals BV | ADDAPT® Anticor™ C 10N is a proprietary mixture of modified monophosphate and diphosphate esters. It is used as a metal passivator in lacquers and paints. This product does not contain BTA, TTA, or amine. | |
Chinox® F57 | Double Bond Chemical Ind., Co., Ltd. | Chinox® F57 is a liquid aromatic amine antioxidant designed for various polymers, such as polyols and polyurethane. The low volatility and liquid nature of this product makes it ideally suited to many substrates and applications. | |
SONGSORB® CS 292 | SONGWON Industrial Group | SONGSORB® CS 292 is an excellent liquid hindered amine light stabilizer developed for coatings. The product can significantly extend the life time of the coatings by minimizing cracking and loss of gloss. | |
KA-7602 | Keeneyes International Co., Ltd. | KA-7602 is a matting powder for amine baking coatings, PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
ROSKYDAL® K 36 | Allnex | ROSKYDAL® K 36 is an amine-accelerated, unsaturated polyester resin of high reactivity and low viscosity which is cold curing, even around 0°C, and forms polymers of medium flexibility. | Request Sample |
ADDITOL® VXW 6396 | Allnex | ADDITOL® VXW 6396 is a flow and leveling agent for waterborne paint systems, without silicone addition. It's a fluorene modified acrylic resin copolymer, neutralized with amine, and improves leveling and substrate wetting. | Request Sample |
Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
VESTAMIN® IPD eCO | Evonik Operations GmbH, BL Crosslinkers | VESTAMIN® IPD eCO is a cycloaliphatic diamine, based on isophorone chemistry. It is a mixture of two stereo-isomers of 3-aminomethyl-3,5,5- trimethylcyclohexylamine and is a colorless low viscosity liquid with a faint amine odor. | Request Sample |
CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...view more CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. view less | |
CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...view more CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. view less | |
PEL-CAT CA100 | Ele Corporation | PEL-CAT CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons that facilitate the operning of the oxirane ring of epoxides. This compound shows marked acceleration because of the presence of the phenolic hydroxyl group. It is an activator for curing agents such as polyamides, amidoamines...view more PEL-CAT CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons that facilitate the operning of the oxirane ring of epoxides. This compound shows marked acceleration because of the presence of the phenolic hydroxyl group. It is an activator for curing agents such as polyamides, amidoamines and amine adducts. PEL-CAT CA100 finds use in many applications including adhesives, casting and flooring. The low volatility of this product minimizes odors. view less | |
GENOCURE* EMK | Rahn USA Corp. | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...view more GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. view less | Request Sample |
EBECRYL® 7100 | Allnex | EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an acceleratin...view more EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an accelerating effect on the UV cure speed. It is recommended for: coatings for paper and plastics, overprint varnishes, screen inks, and wood topcoats. view less | Request Sample |
Docure KH-813 | Kukdo Chemical Co., Ltd. | Docure KH-813 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-813 has low viscosity and solvent free. It can be used for solvent free coating systems and floorings. | |
Grilonit® H 84043 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84043 is a modified cycloaliphatic polyamine adduct that has good flow properties, low carbamate tendency, and low yellowing tendency. This product is used as a slow amine for self-levelling mortars. | |
Nyacol® AP50 | Nyacol Nano Technology | Nyacol® AP50 is a dispersion of nano-sized (colloidal) antimony pentoxide particles in a tertiary amine. The product is used in liquid flame-retarded epoxy systems, in aerospace structural prepregs, and in printed circuit boards. | |
SYNTEVEN 445 | DKSH | SYNTEVEN 445 is a styrenic unsaturated polyester resin, amine promoted, with high reactivity and high stability properties. SYNTEVEN 445 is used as binder for highly filled knifing fillers for metal, wood and mineral substrates. | Request Sample |
KA-7101 | Keeneyes International Co., Ltd. | KA-7101is a matting powder mainly used for amine baking coating, PU and PE coating. It offers high matting efficiency, good transparency, and easy dispersibility. This product has no adverse effect on coating films. | |
Altor™ 200 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 200 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. The formulation is designed to be tough but flexible, lightfast and for highly reactive two-component polyurethane spray coatings. | |
Priamine™ 1071 | Cargill Industrial Specialties | Priamine™ 1071 is an amine functional building block that lends itself to use as a curative in epoxy systems for marine and off-shore coatings, heavy-duty industrial coatings, adhesives, and protective coatings for concrete flooring. | |
D.E.R.™ 317 | Univar Solutions | D.E.R.™ 317 is a high viscosity, fast reacting (20% faster than D.E.R.™ 331™) liquid epoxy resin designed for adhesive applications requiring quick gelling with amine curing agents. | Request Sample |
Sunitor ITX | Yantai Suny Chem International Co., Ltd. | Sunitor ITX is a highly efficient Free Radical Type II solid photo initiator which is used to initiate the UV polymerization of chemically unsaturated pre-polymers (e.g. acrylates) in combination with tertiary amine synergists. | |
NACURE® 3525 | King Industries, Inc. | NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, esp...view more NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, especially in high solids polyester and alkyd formulations. It offers good ahesion, salt spray and water resistance, and no wrinkling. It is soluble in water, alcohol, glycol ethers, ketones, and glycols. It is usually applied in metal decorating, automotive topcoats, coil coatings, can coatings, appliance finishes, general industrials, and electrostatic spray. view less | |
HALOX® 520 | ICL Phosphate Specialty | HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active ...view more HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation solids. It has a shelf life of 36 months. view less | Request Sample |
EBECRYL® LED 03 | Allnex | EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA,...view more EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photoinitiators. view less | Request Sample |
CN119 | Sartomer Americas | CN119 is an amine modified epoxy acrylate providing flexibility, expectionally fast cure, and chemical resistance. Suggested applications include adhesives, laminating and pressure sensitive adhesives, coatings, paper, plastic and wood coatings, electroni...view more CN119 is an amine modified epoxy acrylate providing flexibility, expectionally fast cure, and chemical resistance. Suggested applications include adhesives, laminating and pressure sensitive adhesives, coatings, paper, plastic and wood coatings, electronics and inks. view less | |
Docure KH-818B | Kukdo Chemical Co., Ltd. | Docure KH-818B is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-818B gives high gloss films that are resistant to various chemicals. It can be used for solvent free coating systems and floorings. | |
Docure KH-816 | Kukdo Chemical Co., Ltd. | Docure KH-816 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-816 gives high gloss films that are resistant to various chemicals. These properties make it ideal for formulating floorings and tank linings. | |
Altor™ 202 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 202 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. This was product was designed for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. | |
SONGSORB® CS 119 | SONGWON Industrial Group | SONGSORB® CS 119 is a high molecular weight hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications, including polyolefins, TPO, styrenic polymers, polyamide fibers, polyurethanes, and elastomers. | |
SONGSORB® CS 622 | SONGWON Industrial Group | SONGSORB® CS 622 is a light stabilizer of the hindered amine light stabilizer family (HALS) and because of its oligomeric structure with high molecular weight is the stabilizer of choice for application demanding low volatility and minimal migration. | |
Sunmide® 307D-60 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Sunmide® 307D-60 Curing Agent is a polyamide amine in xylene and n-butanol. It displays very good thixotropic properties. It is most commonly used for fast cure and fast dry applications for industrial epoxy coatings. | Request Sample |
Speedcure EDB | Sartomer Americas | SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
CN386US | Sartomer Americas | CN386US is a monofunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odor, both at press side and in the cured film, and reduce...view more CN386US is a monofunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odor, both at press side and in the cured film, and reduced blooming. view less | |
SpeedBlock 770 | Sartomer Americas | SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end applica...view more SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end application. view less | |
DOWSIL™ 3055 Resin | Dow Performance Silicones | DOWSIL™ 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crosslinker ...view more DOWSIL™ 3055 Resin is an amine functional, solventless liquid silicone resin. It chemically reacts with organic resins that contain epoxide, carboxy, isocyanate or acrylate groups to form silicone-organic copolymers. This product is used as a crosslinker to improve the physical properties and long-term performance of paints and coatings. view less | |
EBECRYL® 81 | Allnex | EBECRYL® 81 is an amine modified polyester acrylate that exhibits very low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 81 cured by UV or electron beam (EB) demonstrate high gloss and low residual odor. It is especiall...view more EBECRYL® 81 is an amine modified polyester acrylate that exhibits very low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 81 cured by UV or electron beam (EB) demonstrate high gloss and low residual odor. It is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks. view less | Request Sample |
Speedcure MBB | Sartomer Americas | SpeedCure MBB is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 246.nm. SpeedCure MBB provides surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. | |
Speedcure EHA | Sartomer Americas | SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
Speedcure BEDB | Sartomer Americas | SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
Nuodex DryCoat – Cobalt-Free | Huntsman Pigments & Additives | Nuodex DryCoat is a unique technology that provides a viable and sustainable alternative to Cobalt in many applications. It is based on a highly active Manganese-Amine Combination that readily changes oxidation state to initiate the drying process. This p...view more Nuodex DryCoat is a unique technology that provides a viable and sustainable alternative to Cobalt in many applications. It is based on a highly active Manganese-Amine Combination that readily changes oxidation state to initiate the drying process. This product has a manganese content of 1%. view less | |
Chisorb® B2750 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® B2750 is used in polyurethanes such as Reaction Injection Molding (RIM) polyurethane and thermoplastic polyurethane (TPU). It is a mixture of hindered amine light stabilizer, hindered phenolic antioxidant and UV absorber. This product appears as ...view more Chisorb® B2750 is used in polyurethanes such as Reaction Injection Molding (RIM) polyurethane and thermoplastic polyurethane (TPU). It is a mixture of hindered amine light stabilizer, hindered phenolic antioxidant and UV absorber. This product appears as a clear, slightly yellow liquid. view less | |
Doublecure® LBP | Double Bond Chemical Ind., Co., Ltd. | Doublecure® LBP is an efficient liquid photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115 and 225 generates free radicals, which can initiate polymerization of UV radiation curing systems. | |
POLYCAT® SA 5 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 5 is a gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It is recommended to use in conjunction with DABCO® BA 100 to improve pot life time. | |
SYNTEVEN 454 | DKSH | SYNTEVEN 454 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 454 is used as full binder for highly filled knifing fillers for metal, wood and mineral substra...view more SYNTEVEN 454 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 454 is used as full binder for highly filled knifing fillers for metal, wood and mineral substrates. view less | Request Sample |
SYNTEVEN 474 | DKSH | SYNTEVEN 474 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 474 is used as full binder for highly filled knifing fillers for metal, wood and mineral substra...view more SYNTEVEN 474 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 474 is used as full binder for highly filled knifing fillers for metal, wood and mineral substrates. view less | Request Sample |
DryPlus – Chelating Agent | Huntsman Pigments & Additives | DryPlus is a tertiary amine based chelating agent for solvent and water borne alkyds and unsaturated polyester resin. It has been especially formulated to enhance the performance of Nuodex Drycoat in Wood Stain applications. DryPlus acts as a sacrificial ...view more DryPlus is a tertiary amine based chelating agent for solvent and water borne alkyds and unsaturated polyester resin. It has been especially formulated to enhance the performance of Nuodex Drycoat in Wood Stain applications. DryPlus acts as a sacrificial additive and is affective when used in systems containing silica matting agents or dark coloured systems containing colorants such as carbon black and iron oxide. The enhanced performance improves the surface, through dry and film hardness view less | |
EBECRYL® 83 | Allnex | EBECRYL® 83 is an amine modified polyester acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 83 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. ...view more EBECRYL® 83 is an amine modified polyester acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 83 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. It is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks. view less | Request Sample |
Speedcure BEM | Sartomer Americas | SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulati...view more SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. view less | |
AFCONA - 4015 | AFCONA Additives Sdn Bhd | AFCONA – 4015 is a modified polyurethane polymer in a xylene, alkylbenzene, DIBK, and MEK solution. This product functions as a dispersant for co-grinding, functioning in high polar systems. AFCONA – 4015 contains strong acid and amine functional groups a...view more AFCONA – 4015 is a modified polyurethane polymer in a xylene, alkylbenzene, DIBK, and MEK solution. This product functions as a dispersant for co-grinding, functioning in high polar systems. AFCONA – 4015 contains strong acid and amine functional groups and finds application in coatings. view less | |
AP-Cat 0043 | FTC Korea Co.,Ltd | AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and ...view more AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and PVC and general industrial coatings. view less | Request Sample |
AP-Cat 0043L | FTC Korea Co.,Ltd | AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and ...view more AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and PVC and general industrial coatings. view less | Request Sample |
WANALINK® 6200 4,4'-bis(sec-butylamino) Diphenylmethane | Wanhua Chemical Group Co., Ltd. | WANALINK® 6200 is the brand name of 4,4’-bis(sec-butylamino) Diphenylmethane. It is a liquid secondary diamine. One of the atoms of hydrogen on each of the amine group is substituted by a secondary butyl group, so that the combination of an active hydroge...view more WANALINK® 6200 is the brand name of 4,4’-bis(sec-butylamino) Diphenylmethane. It is a liquid secondary diamine. One of the atoms of hydrogen on each of the amine group is substituted by a secondary butyl group, so that the combination of an active hydrogen atom and a secondary butyl group in a confined space creates many unusual properties. The amine portion forms area linkages which affect the hard segment domains, while the butyl groups functions as inner plasticizer. Bonded to the polymer matrix, it neither leaches, nor bloom. The alkyl groups also improve the solubility of the diamine, allowing it to blend readily with almost any polyol or polyamine. view less | |
K-FLEX® XM-3307 | King Industries, Inc. | K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appear...view more K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appears as a viscous liquid and offers fast dispersion time, high pigment loading, and high pigment transparency. It is soluble in ketones, alcohols, esters, aromatic hydrocarbons, and is not soluble in aliphatic hydrocarbons. It can be soluble in water if it is neutralized with an organic amine. K-FLEX® XM-3307 can also be applied in water-based coatings, solvent-based coatings, and can be used as an intercoat adhesion promoter. view less | |
CN373 | Sartomer Americas | CN373 is a reactive amine coinitiator that can be used in combination with a hydrogen abstracting photoinitiator, such as benzophenone or isopropyl thioxanthone (ITX), to promote free radical polymerization. CN373 accelerates surface cure speed and helps ...view more CN373 is a reactive amine coinitiator that can be used in combination with a hydrogen abstracting photoinitiator, such as benzophenone or isopropyl thioxanthone (ITX), to promote free radical polymerization. CN373 accelerates surface cure speed and helps overcome oxygen inhibition in UV curable coatings and inks. view less |