UL Prospector

Success!

Successfully saved your search
561 Results
Adhesion Promoters 101 Marc Hirsch Adhesion is one of the most important properties of both decorative and protective coatings. Many of the additives used in coating formulations can have a negative impact on the overall adhesion behavior, even for surfaces that would not be considered dif...view more Adhesion is one of the most important properties of both decorative and protective coatings. Many of the additives used in coating formulations can have a negative impact on the overall adhesion behavior, even for surfaces that would not be considered difficult for adhesion. Adhesion promoters (AP) are bi-functional materials that increase adhesive strength between the coating and the substrate and sometimes are referred to as coupling agents. Learn more about adhesion promoters in this article on the Prospector Knowledge Center... view less
Coatings Additives – Defoamers, Adhesion Promoters & UV Protection Marc Hirsch Coatings expert, Marc Hirsch, explains the three additives categories that challenge coatings formulators: defoamers, adhesion promoters & UV protection. These were chosen since their chemistries, applications and mode of activity are very diverse, and ca...view more Coatings expert, Marc Hirsch, explains the three additives categories that challenge coatings formulators: defoamers, adhesion promoters & UV protection. These were chosen since their chemistries, applications and mode of activity are very diverse, and can be some of the more challenging additives to employ in coatings formulation. view less
EBECRYL® 741 Allnex EBECRYL® 741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. Request Sample
HARDLEN CY2329 DKSH HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...view more HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. HARDLEN CY2329 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN F-225P DKSH HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...view more HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F225P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN EW5250 DKSH HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
Tytan TNPT (Tetra N-Propyl Titanate) Borica Co., Ltd. Tytan TNPT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings.
HARDLEN CY2321P DKSH HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...view more HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY2321P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
Tytan TNBT (Tetra N-Butyl Titanate) Borica Co., Ltd. Tytan TNBT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings.
JEFFAMINE® T-5000 POLYOXYPROPYLENEDIAMINE Huntsman Performance Products Trifunctional primary amine of approximately 5000 molecular weight used as crosslinker for polyurea, co-reactant in epoxy systems where adhesion promotion and flexibility are important.
HARDLEN 13LP DKSH HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or...view more HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN 13LP main applications is adhesive for Polyolefins, Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN EH801J DKSH HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EH801J main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN EW5515 DKSH HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5515 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN EZ2250 DKSH HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EZ2250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN NZ1004 DKSH HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...view more HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1004 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN NZ1015 DKSH HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...view more HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1015 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
SAM HS-100 DKSH SAM HS-100 is an acrylate modified acidic adhesion promoting agent designed as a modifier for ultra violet (UV) and electron beam (EB) curable coating on metal and glass. Request Sample
EBECRYL® 171 Allnex EBECRYL® 171 is a methacrylate modified acidic adhesion promoting agent designed as a modifier for ultraviolet (UV) and electron beam (EB) curable coatings. It is characterized by low viscosity, acid functionality, and adhesion on various substrates. Request Sample
TOYOTAC PMA-L DKSH TOYOTAC PMA-L is a Maleic acid modified Polyolefin. It is grafted with maleic anhydride. It has high content of maleic anhydride. It is an Adhesion Promoter and compatibilizer. It is a powerful CPO and Primer. Totyotac PMA-L main characteristics are: Good...view more TOYOTAC PMA-L is a Maleic acid modified Polyolefin. It is grafted with maleic anhydride. It has high content of maleic anhydride. It is an Adhesion Promoter and compatibilizer. It is a powerful CPO and Primer. Totyotac PMA-L main characteristics are: Good Hot Melt adhesion power to Polyolefin, PET,PA, Steel, Metal and EVOH. Good compatibilizer between PP/PA, PP/EPDM, PP/PC etc. Good coupling agent for glass fiber reinforced PP and mineral-filled PP. TOYOTAC PMA-L main aplications are: Hot melt adhesives for Alminium foil and Polyolefin as wrapping materials. Hot Melt Lamination for the multi-layer films such as EVOH/PP, PA/PP. Coupling agent for Polypropylene reinforced with glass-fiber, talc or inorganic-filler. Compatibilizer for Polypropylene combination with wood-fiber. Compatibilizer for the fiber-reinforced plastics. Available in select countries. Please inquire for more details. view less Request Sample
Tytan TIPT (Tetra Isopropyl Titanate) Borica Co., Ltd. Tytan TIPT can be used as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. It is most suitable for use in the glass and glass fiber manufacturing.
Tytan TNPZ (Tetra N-Propyl Zirconate) Borica Co., Ltd. Tytan TNPZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings.
Tytan TNBZ (Tetra N-Butyl Zirconate) Borica Co., Ltd. Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings.
MM-211 Designer Molecules MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...view more MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. view less
CN146 Sartomer Americas CN146 is an adhesion promoting acrylic oligomer that is used in free radical-curable applications, including adhesives, coatings, solder masks and photoresists. CN146 has excellent adhesion to metal and plastics, low viscosity and is soluble in caustic so...view more CN146 is an adhesion promoting acrylic oligomer that is used in free radical-curable applications, including adhesives, coatings, solder masks and photoresists. CN146 has excellent adhesion to metal and plastics, low viscosity and is soluble in caustic solutions. view less
EBECRYL® 767 Allnex EBECRYL® 767 is an acid functionalized acrylic resin diluted with 38% of isobornyl acrylate (IBOA)(1) monomer. This light coloured, moderate viscosity resin is designed as an adhesion promoting additive and it can also be used as a primer or top coat. Request Sample
SILCOLEASE PC-850 Elkem Silicones ​SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE​ polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polye...view more ​SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE​ polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polyester film. A 1% addition to the formulated bath will produce excellent anchorage even under high humidity conditions. SILCOLEASE PC-850 does not require excessive surface treatment of PET thus providing energy savings nor does SILCOLEASE​ PC-850 slow cure response as compared to other adhesion promoters. For best results, this adhesion promoter ought to be added to the catalyzed silicone release coating as soon as possible before initiating the coating operation. view less
Trixene BI 201 Baxenden Chemicals Ltd. Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, text...view more Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less
CoatOSil* MP 200 Silane Momentive CoatOSil* MP 200 Silane is an epoxy functional silane oligomer that may be considered for use as an adhesion promoter or binder in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. It typically aids adhesion promotion and ...view more CoatOSil* MP 200 Silane is an epoxy functional silane oligomer that may be considered for use as an adhesion promoter or binder in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. It typically aids adhesion promotion and crosslinking of waterborne or solvent based coatings as well as dispersion of metallic pigments in waterborne systems. view less Request Sample
Special-Primer PP 7560 Worlée-Chemie G.m.b.H. Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less
ASKOFEN™ 779 W 50 ASK Chemicals ASKOFEN™ 779 W 50 is a liquid, aqueous resorcinol-formaldehyde resin. ASKOFEN™ 779 W 50 is used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex. RFLs are used as adhesion promoters in the rubber industry to increase textile rubber adhesion...view more ASKOFEN™ 779 W 50 is a liquid, aqueous resorcinol-formaldehyde resin. ASKOFEN™ 779 W 50 is used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex. RFLs are used as adhesion promoters in the rubber industry to increase textile rubber adhesionview less
Trixene BI 200 Baxenden Chemicals Ltd. Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...view more Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less
SiSiB® PC1412 SiSiB SILICONES SiSiB® PC1412 is a clear to straw liquid. It is a bifunctional organosilane possessing two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. It can be used as a coupling agent, adhesion promoters, surface modifier, etc. or as a starti...view more SiSiB® PC1412 is a clear to straw liquid. It is a bifunctional organosilane possessing two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. It can be used as a coupling agent, adhesion promoters, surface modifier, etc. or as a starting material in the synthesis of amino-functional silicones. view less
Hydro PLIOLITE® 050 Omnova Solutions Hydro PLIOLITE® 050 is based on a proprietary ABS technology (Amphoteric Binding System, polymer that contains both anionic and cationic groups). It is a core-shell acrylic copolymer incorporating adhesion promoting monomers. Hydro PLIOLITE® 050 is ideall...view more Hydro PLIOLITE® 050 is based on a proprietary ABS technology (Amphoteric Binding System, polymer that contains both anionic and cationic groups). It is a core-shell acrylic copolymer incorporating adhesion promoting monomers. Hydro PLIOLITE® 050 is ideally suited for stain blocking primers and paints, multi purpose low VOC primers. view less
SiSiB® PC1220 SiSiB SILICONES SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to pr...view more SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites; as a starting material in the synthesis of amino-functional silicones; or as an adhesion promoters in one-part silylated urethane adhesives and sealants. view less
Polyester Actylate SP 236 Soltech Ltd Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesi...view more Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236 is 60% polymer solid by weight with a viscosity of 2,400-2,800 at 25℃. view less
Lumicryl® 1928 Estron Chemical, Inc. Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-form...view more Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations for various applications. view less
Polyester Actylate SP 236L Soltech Ltd Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhes...view more Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236L is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. view less
Polyester Actylate SP 238 Soltech Ltd Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesio...view more Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 238 is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. view less
Dynoadd® F-800 Dynoadd by Dynea Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...view more Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. view less Request Sample
Hartben 405 Benasedo Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for n...view more Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for nitrocellulose. It is also used in flexographic inks for paper and plastic substrates. view less
EBECRYL® 1300 Allnex EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. Suggested applications f...view more EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. Suggested applications for EBECRYL® 1300 include: displays / signage / POP, vending machine panels, packaging, sporting goods, architectural, electronics, appliance nameplates, housing, toys, and novelty items. view less Request Sample
CN827 Sartomer Americas CN827 is a unique acrylic oligomer that promotes adhesion to non-porous substrates, especially plastics. CN827 has high reactivity for improved cure response and enhanced hydrophobicity for good Lithographic performance and stability.
CN825 Sartomer Americas CN825 is a unique acrylic oligomer that enhances adhesion to non-porous substrates, especially plastics. CN825 demonstrates improved cure response and hardness versus CN823. It is further characterized by good lithographic performance and stability. This ...view more CN825 is a unique acrylic oligomer that enhances adhesion to non-porous substrates, especially plastics. CN825 demonstrates improved cure response and hardness versus CN823. It is further characterized by good lithographic performance and stability. This product offers good weather resistance and weatherability, high abrasion resistance, high impact strength, and solvent resistance. CN825 is recommended for laminating adhesives, metal and plastic coatings, and inks. view less
Silane Coupling Agent KH-560 Zhejiang Feidian Chemical Co., Ltd. KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion...view more KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. view less
Silane ATPN-187 Beijing Entrepreneur Science &Trading Co., Ltd. Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion...view more Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. view less
VANCRYL® 960 Allnex VANCRYL® 960 is a very low Tg acrylic polymer for film printing applications in the graphic arts industry. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. This polymer can be used as the backbone...view more VANCRYL® 960 is a very low Tg acrylic polymer for film printing applications in the graphic arts industry. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. This polymer can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45. view less Request Sample
SR9050 Sartomer Americas SR9050 is a monofunctional adhesion promoting monomer that provides exceptional adhesion to metal substrates, including aluminum, brass, tin-free steel and steel. This product is designed for UV/EB cured inks and coatings. SR9050 offers high flexibility, ...view more SR9050 is a monofunctional adhesion promoting monomer that provides exceptional adhesion to metal substrates, including aluminum, brass, tin-free steel and steel. This product is designed for UV/EB cured inks and coatings. SR9050 offers high flexibility, high impact strength, and low shrinkage for laminating adhesives and metal and glass coating applications. Due to its high acid value, this product is not recommended for use in formulations containing tertiary amines. view less
CYREZ® 963 Product Family (100% HMMM) Allnex Cyrez® 963 E Resin Liquid is a hexa methoxy methyl melamine (HMMM) used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexamethylene tetramine (HEXA or HMT) sys...view more Cyrez® 963 E Resin Liquid is a hexa methoxy methyl melamine (HMMM) used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexamethylene tetramine (HEXA or HMT) system. Cyrez resins are relatively nontoxic and present little hazard of dermatitis. An additional advantage is that they are not corrosive to steel cord, polyester cord or metal molds. view less Request Sample
Titanate FD-IAM Zhejiang Feidian Chemical Co., Ltd. Titanate FD-IAM is a new grade of titanate specifically developed for the printing ink industry. This new titanium-based phosphate complex helps overcome some of the identified performance issues. It offers the following features: good stability in solvent-borne printing inks, good adhesion...view more Titanate FD-IAM is a new grade of titanate specifically developed for the printing ink industry. This new titanium-based phosphate complex helps overcome some of the identified performance issues. It offers the following features: good stability in solvent-borne printing inks, good adhesion promotion and cross-linking properties resulting in improved water, solvent, and heat resistance, high reactivity during curing, low or no discoloration, and no release of acetylacetone. view less
Lupasol® BASF Formulation Technologies Lupasol® Polyethylenimine (PEI) polymers have a branched cationic structure with high charge density that enables improved adhesion of dissimilar materials. Lupasol® can be used as a formulation additive or primer coat for: adhesion promotion, pigment sta...view more Lupasol® Polyethylenimine (PEI) polymers have a branched cationic structure with high charge density that enables improved adhesion of dissimilar materials. Lupasol® can be used as a formulation additive or primer coat for: adhesion promotion, pigment stabilization, and increased particle cohesion. Obtained from the polymerization of ethylenimine, this line of polymers is available in a wide range of molecular weights (from 800 -106 g/mol). Lupasol® products are water soluble and also exhibit good solubility in polar solvents with the added benefit of having a strong eco-toxicological profile including several food contact compliances. view less Request Sample
SiSiB® PC3100 SiSiB SILICONES SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving size-binders, as an adhesion-promoting additive in waterborne systems, to improve dry and wet strength in cured composites reinforced with glass fiber rovings, or to improve adhesion...view more SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving size-binders, as an adhesion-promoting additive in waterborne systems, to improve dry and wet strength in cured composites reinforced with glass fiber rovings, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
K-PURE® CDI-4308 King Industries, Inc. K-PURE® CDI-4308 is a 100% active organic liquid additive that is based on a proprietary heterocyclic amine derivative. K-PURE® CDI-4308 has an affinity for soft metals, which can help with corrosion prevention, adhesion promotion and lubrication. K-PURE®...view more K-PURE® CDI-4308 is a 100% active organic liquid additive that is based on a proprietary heterocyclic amine derivative. K-PURE® CDI-4308 has an affinity for soft metals, which can help with corrosion prevention, adhesion promotion and lubrication. K-PURE® CDI-4308 was created for solvent based and solventless systems. It appears as a clear amber liquid and offers low viscosity, compatibility with many solvents & resins, and it is a solventless liquid. This product can be used in any application that needs corrosion prevention. view less
DOUBLEMER® 9166 Double Bond Chemical Ind., Co., Ltd. DOUBLEMER® 9166 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint...view more DOUBLEMER® 9166 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint color allows for versatile adhesion promotion with various kinds of UV coatings. This product appears as a dark liquid. Formulated UV/EB curable products containing DOUBLEMER® 9166 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. It is recommeneded for use in solder resist formulations, metal coatings. plastic coatings and etch resist applications. view less
K-PURE® CDR-3316 King Industries, Inc. K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations include cationic cured epoxies, aminoplast, siloxane and urethane based systems. It appears as a clear, light straw liquid and offers adhesion...view more K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations include cationic cured epoxies, aminoplast, siloxane and urethane based systems. It appears as a clear, light straw liquid and offers adhesion promotion and resistivity. This product is soluble in esters, alcohols, xylene, aromatic 100 & aromatic 150, ketones, and is insoluble in water. It can be applied in anti-reflective coatings, conformal coatings, and conductive & dielectric adhesives. view less
K-PURE® CDR-3314 King Industries, Inc. K-PURE® CDR-3314 is a reactive, aliphatic polyester polyol, that is suggested for modifying cationic cured epoxy systems, aminoplast resins and siloxanes to give improvements in adhesion and flexibility. Its uniform, narrow molecular weight distribution a...view more K-PURE® CDR-3314 is a reactive, aliphatic polyester polyol, that is suggested for modifying cationic cured epoxy systems, aminoplast resins and siloxanes to give improvements in adhesion and flexibility. Its uniform, narrow molecular weight distribution and original chemical structure produce consistent performance and compatibility. This product appears as a clear, light straw liquid and offers good flexibility, resistivity, low VOC, and adhesion promotion. It is soluble in esters, xylene, ketones, alcohols, aromatic 100 & aromatic 150, and is insoluble in water. It can be applied in conductive adhesives, dielectric adhesives, anti-reflective coatings, and conformal coatings. view less
Silane Coupling Agent KH-7180 Zhejiang Feidian Chemical Co., Ltd. KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This ...view more KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This product is recommended for automotive laminate adhesives, furniture laminate adhesives, and flocking adhesives. view less
Tytan AQ33 (Water-borne Titanate Adhesion Promoter) Borica Co., Ltd. Tytan AQ33 can be used as an adhesion promoter or cross linking agent. It is recommended for water-borne coatings in base environments on various surfaces.
Super Chlorinated Resin Solution SCR 465 PhibroChem Super Chlorinated Resin Solution SCR 465 is an advanced Chlorinated Polyolefin adhesion promoter supplied in Toluene, Xylene or Aromatic 100 to meet specific formulating needs. SCR 465 is used as an adhesion promoter primer or as a component in adhesion p...view more Super Chlorinated Resin Solution SCR 465 is an advanced Chlorinated Polyolefin adhesion promoter supplied in Toluene, Xylene or Aromatic 100 to meet specific formulating needs. SCR 465 is used as an adhesion promoter primer or as a component in adhesion promoter formulas. This product provides adhesion to even the most difficult grades of ThermoPlastic Olefin (TPO). It can be spray applied with commercial spray equipment or can be packaged in aerosol cans. Super Chlorinated Resin Solution SCR 465 also adheres well to PET, Nylon, ABS, PVC and many types of metal. view less Request Sample
SiSiB® PC3200 SiSiB SILICONES SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
SiSiB® PC3300 SiSiB SILICONES SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
GENORAD* 41 Rahn USA Corp. GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations fro...view more GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations from 1% to 5%. view less Request Sample
DOUBLEMER® 9167 Double Bond Chemical Ind., Co., Ltd. DOUBLEMER® 9167 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint...view more DOUBLEMER® 9167 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint color allows for versatile adhesion promotion with various kinds of UV coatings. It is also characterized by its acid functionality. This product appears as a yellowish clear liquid. Formulated UV/EB curable products containing DOUBLEMER® 9167 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. It is recommended for use in solder resist formulations, metal coatings and plastic coatings (for melamine resin and Nylon etc). view less
Tytan TET (Titanate Adhesion Promoter) Borica Co., Ltd. Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane syste...view more Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane systems. view less
SiSiB® PC1200 SiSiB SILICONES SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or ...view more SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants. view less
Tytan TAA (Titanate Adhesion Promoter) Borica Co., Ltd. Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-i...view more Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-improvement properties which makes it very suitable to strongly improve performance properties of industrial coatings on difficult modern polymeric substrates, glass and some metals. view less
SiSiB® PC3400 SiSiB SILICONES SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
Tytan AQ5000 (Water-borne Titanate Adhesion Promoter) Borica Co., Ltd. Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the performance when the water content is increased in the system. Tytan AQ5000 can be used as an adhesion...view more Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the performance when the water content is increased in the system. Tytan AQ5000 can be used as an adhesion promoter or cross linking agent for water-borne coatings in acid environments on various surfaces. view less
SiSiB® PC1118 SiSiB SILICONES SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications inc...view more SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications including a size constituent or finish for glass fiber/glass fabric composites; metal primer; as an additive to phenolic resin binders in mineral fiber insulating materials and abrasives; as an additive to phenolic, furane and melamine resins; a primer or additive in sealants and adhesives; mineral-filled polymers (composites) or HFFR cables; pretreatment of fillers and pigments; improvement of adhesion to the substrate in paints and coatings; improvement of flexural strength, tensile strength, impact strength and modulus of elasticity; or resistance to moisture and corrosion. view less
LOXANOL® MI 6730 BASF Formulation Additives LOXANOL® MI 6730 is an aqueous solution of a cationic polymer based on polyethylene imine. It is a very effective adhesion promoter in multilayer packaging films manufactured by coating, lamination, extrusion coating or co-extrusion. As a primer, it prov...view more LOXANOL® MI 6730 is an aqueous solution of a cationic polymer based on polyethylene imine. It is a very effective adhesion promoter in multilayer packaging films manufactured by coating, lamination, extrusion coating or co-extrusion. As a primer, it provides excellent adhesion; for example, water-based heat-seal lacquers on substrates like aluminum foil and OPP. view less Request Sample
SiSiB® PC1130 SiSiB SILICONES SiSiB® PC1130 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for...view more SiSiB® PC1130 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for material changes to chemical substances. It can be used as an additive to cold-curing phenolic and furan foundry resins; as a size constituent or finish in glass fiber/glass fabric composites; in glass and metal primers; as an additive to phenolic resin binders in abrasives; as primer or additive and for chemical modification in sealants and adhesives; for pretreatment of fillers and pigments or as additive in mineral-filled composites; for synthesis of functional silicones; for improvements in adhesion or mechanical properties including flexural strength, tensile strength, impact strength and modulus of elasticity; or for resistance to moisture and corrosion. view less
SiSiB® PC3510 SiSiB SILICONES SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), or in waterborne coating formulations, to improve solvent, impact and mar resistance, wet and dry adhesion, also stain resistance in wood and automotive plastic coatings. view less
SiSiB® PC3500 SiSiB SILICONES SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
HARDLEN 15-LP DKSH HARDLEN 15-LP is and adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN 15-LP has suitable properties for printing ink on polypropylene films. HARDLEN 15-LP has the following properties: excellent adhesion to untreated p...view more HARDLEN 15-LP is and adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN 15-LP has suitable properties for printing ink on polypropylene films. HARDLEN 15-LP has the following properties: excellent adhesion to untreated polypropylene films and good solubility in solvent (Toluene). This product is available in Europe and North America. view less Request Sample
Superchlon® S-4625 (Waterborne) PhibroChem Superchlon® S-4625 (Waterborne) is an emulsion using the same CPO resin as Superchlon® E-415 but with different additives. A new alternative system with outstanding properties as formulation using Superchlon® E-415 may be found with Superchlon® S-4625. Th...view more Superchlon® S-4625 (Waterborne) is an emulsion using the same CPO resin as Superchlon® E-415 but with different additives. A new alternative system with outstanding properties as formulation using Superchlon® E-415 may be found with Superchlon® S-4625. The difference on the properties will depend on the co-resins and additives used together with the Superchlon® waterborne in the final formulation. This product appears as a light brown liquid. view less Request Sample
LUTONAL® I 60 approx. 80% in Hydrotreated Light Naphtha (Mineral Spirits) BASF Dispersions & Resins LUTONAL I 60 solution is a poly(vinyl isobutyl ether) of medium molar mass dissolved in mineral spirit. It can be used to make pressure sensitive materials. The adhesives have very good initial tack. Sticky coatings for flypaper are produced from LUTONAL ...view more LUTONAL I 60 solution is a poly(vinyl isobutyl ether) of medium molar mass dissolved in mineral spirit. It can be used to make pressure sensitive materials. The adhesives have very good initial tack. Sticky coatings for flypaper are produced from LUTONAL I 60 solution together with beeswax and resins. view less Request Sample
Propylene Carbonate Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. Propylene Carbonate is an organic compound with the formula C4H6O3. It has multiple applications for use in the production of; lithium battery electrolytes, adhesives, polyurethane coatings, synthetic fibers, household cleaners, foundry resins and related...view more Propylene Carbonate is an organic compound with the formula C4H6O3. It has multiple applications for use in the production of; lithium battery electrolytes, adhesives, polyurethane coatings, synthetic fibers, household cleaners, foundry resins and related applications. view less
TTA21 Hainan Zhongxin Chemical Co., Ltd. TTA21 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate is a pale yellow to colorless transparent liquid that is miscible with a wide range of organic solvents, including acetone, ethanol, and benzene. It is primarily used as an additive for pain...view more TTA21 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate is a pale yellow to colorless transparent liquid that is miscible with a wide range of organic solvents, including acetone, ethanol, and benzene. It is primarily used as an additive for paints and coatings, it’s low viscosity and good fluidity makes it suitable for use in bulk manufacturing. view less
Bonding Agent 51030 Rhein Chemie Rheinau GmbH Bonding Agent 51030 is a solvent-free one-component bonding agent that appears as a yellow viscous liquid. Bonding Agent 51030 is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide.
Bonding Agent 51030 N Rhein Chemie Rheinau GmbH Bonding Agent 51030 N is a preparation of a polyisocyanurate in di-iso-nonyl phthalate (DINP) that appears as a yellow viscous liquid. Bonding Agent 51030 N functions as a solvent-free one-component bonding agent and is used to improve the adhesion of PVC...view more Bonding Agent 51030 N is a preparation of a polyisocyanurate in di-iso-nonyl phthalate (DINP) that appears as a yellow viscous liquid. Bonding Agent 51030 N functions as a solvent-free one-component bonding agent and is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. view less
LOXANOL® MI 6721 BASF Formulation Additives PEI based polymer for improving ink and coating adhesion. Request Sample
K-PURE® CDR-3317 King Industries, Inc. K-PURE® CDR-3317 is an aliphatic, low molecular weight urethane diol oligomer, supplied at 100% solids. It is suggested to be used in systems that require adhesion promotion, chemical resistance, and hardness development. K-PURE® CDR-3317 is ideal for ami...view more K-PURE® CDR-3317 is an aliphatic, low molecular weight urethane diol oligomer, supplied at 100% solids. It is suggested to be used in systems that require adhesion promotion, chemical resistance, and hardness development. K-PURE® CDR-3317 is ideal for aminoplast resins, siloxanes and urethanes. K-PURE® CDR-3317 also acts as a compatibilizer or coalescing aid, with the benefit of co-reacting with the system. It appears as a viscous, clear liquid and offers low VOC. This product is soluble in water, almost all organic solvents, and is insoluble in aromatic solvents. It can be applied in conformal coatings, adhesives & sealants, and anti reflective coatings. view less
SAM-C100 DKSH SAM-C100 as adhesive promoter is containing carboxylic acid modified acrylate monomer and is applicable to glass, metal and inorganic substrate. Request Sample
HARDLEN HM-21P DKSH HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARD...view more HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN HM-21P main characteristics are: good adhesion to PP, TPO(Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatment, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint, excellent resistance against Water, Gasoline and Gasohol after top-coating. This product is available in Europe and North America. view less Request Sample
HARDLEN DX-530P DKSH HARDLEN DX-530P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-530P has the following characteristics: excellent solubility in various solvents...view more HARDLEN DX-530P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-530P has the following characteristics: excellent solubility in various solvents and solution stability is very good at low temperature. This product is available in Europe and North America. view less Request Sample
HARDLEN CY-9122P DKSH HARDLEN CY-9122P is an adhesion promoter for polyolefin. It has a good adhesion to polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9122P: Good adhesion to PP,TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without so...view more HARDLEN CY-9122P is an adhesion promoter for polyolefin. It has a good adhesion to polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9122P: Good adhesion to PP,TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments ,such as "framing treatment", Good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, Excellent resistance against Water, Humidity and Gasoline after top-coating, Easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons and easy dissolving in non-aroma solvents such as Methyl-cyclohexane or Ester mixture. This product is available in Europe and North America. view less Request Sample
HARDLEN CY-9124P DKSH HARDLEN CY-9124P is an adhesion promoter for polyolefin. It has a good adhesion to Polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9124P are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates wit...view more HARDLEN CY-9124P is an adhesion promoter for polyolefin. It has a good adhesion to Polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9124P are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", Good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, Excellent resistance against Water, Humidity and Gasoline after top-coating, Easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons and easy dissolving in non-aroma solvents such as Methyl-cyclohexane or Ester mixture. This product is available in Europe and North America. view less Request Sample
BYK-4512 BYK BYK-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. In coil coatings, BYK-4512 improves adhesion after water immersion and forming processes, for example deep-drawing, T-bend, and corrosion resistance. It is particularl...view more BYK-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. In coil coatings, BYK-4512 improves adhesion after water immersion and forming processes, for example deep-drawing, T-bend, and corrosion resistance. It is particularly well-suited for use in chromate-free primers and on metal substrates that are pre-treated in a chromate-free manner. BYK-4512 reacts with melamine resins and polyisocyanates and is cross-linked into the polymer matrix. In industrial coatings, BYK-4512 improves the adhesion of coatings, which are applied directly onto metal or glass. The additive is particularly well-suited for use in 2K systems and baking coatings. view less Request Sample
SiSiB® PC4300 SiSiB SILICONES SiSiB® PC4300 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is used as adhesion promoter at organic/inorganic interfaces, as surface modifier; as a coupling agent to improve the physical ...view more SiSiB® PC4300 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is used as adhesion promoter at organic/inorganic interfaces, as surface modifier; as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture; to functionalize resins via radical initiated processes - copolymerization or grafting - and to modify surfaces; improve strength as glass fiber size composite in reinforced polyester composites; enhance initial and wet strength of reinforced polyester resin composites; enhance the wet electrical properties of many mineral-filled and reinforced composites; and improve adhesion and durability of adhesives and coatings. view less
HARDLEN M-28P DKSH HARDLEN M-28P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN M-28P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLE...view more HARDLEN M-28P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN M-28P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN M-28P main characteristics are good adhesion to PP, TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments ,such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint (polyester-melamine-paint or polyurethane-paint), excellent resistance against Water, Gasoline and Gasohol after top-coating, low temperature baking is available, good compatibility with other resins and good stability in low temperature. This product is available in Europe and North America. view less Request Sample
Chlorinated Rubber-YURON CR-130 Yuron New Material YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most est...view more YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. view less
3# Water-Based Sealing Coating Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. 3# Water-Based Sealing Coating is a transparent coating. It is used as a coating for its transparency, and adhesion. It is commonly used in various kinds of primer and does not change the properties of the primer.
Chlorinated Rubber-YURON CR-170 Yuron New Material YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in...view more YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in most esters. view less
nolax C49.8502 nolax AG (Vanora) nolax C49.8502 is a liquid alkyl titanate in alcohol solution that is transparent and has a solvent characteristic odor. It contains adhesion-activating materials for cleaning and activation of substrate surfaces before bonding with PUR adhesives and nola...view more nolax C49.8502 is a liquid alkyl titanate in alcohol solution that is transparent and has a solvent characteristic odor. It contains adhesion-activating materials for cleaning and activation of substrate surfaces before bonding with PUR adhesives and nolax Silan. It can be used on non-porous materials, not to be used on porous surfaces, such as plastics, metals, glazed ceramic surfaces, and varnished surfaces. Greatly contaminated surfaces must be pre-cleaned before putting on the wash primer. nolax C49.8502 has a density of approximately 0.80 g/ml, a viscosity of 2 mPa•s at 20°C, and a pH value of approximately 7. view less
BMI-1700 Designer Molecules BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications.
Bonding Agent 2005 Rhein Chemie Rheinau GmbH Bonding Agent 2005 is a formulation of an aromatic polyisocyanurate in n-butyl acetate appearing as a viscous, light yellow liquid. It is a high performance, reactive and phthalate-free one-component bonding agent. Bonding Agent 2005 is used to improve the adhesion...view more Bonding Agent 2005 is a formulation of an aromatic polyisocyanurate in n-butyl acetate appearing as a viscous, light yellow liquid. It is a high performance, reactive and phthalate-free one-component bonding agent. Bonding Agent 2005 is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester of polymaide. view less
Bonding Agent 51066 N Rhein Chemie Rheinau GmbH Bonding Agent 51066 N is a preparation of a polyisocyanurate in alkylsulphonic acid ester of phenols and polyiso-cyanurate appearing as a yellow liquid. Bonding Agent 51066 N is phthalate- and solvent-free one-component bonding agent used to improve the adhesion...view more Bonding Agent 51066 N is a preparation of a polyisocyanurate in alkylsulphonic acid ester of phenols and polyiso-cyanurate appearing as a yellow liquid. Bonding Agent 51066 N is phthalate- and solvent-free one-component bonding agent used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. view less
Bonding Agent 51099 Rhein Chemie Rheinau GmbH Bonding Agent 51099 is a formulation of a polyisocyanurate in isononylbenzoate (INB) that appeats as a slightly yellow to yellow viscous liquid. Bonding Agent 51099 is a high performance, reactive, phthalate- and solvent-free one-component bonding agent used to improve the adhesion...view more Bonding Agent 51099 is a formulation of a polyisocyanurate in isononylbenzoate (INB) that appeats as a slightly yellow to yellow viscous liquid. Bonding Agent 51099 is a high performance, reactive, phthalate- and solvent-free one-component bonding agent used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. view less
Tytan AP20 (Titanate Adhesion Promoter) Borica Co., Ltd. Tytan AP20 is primarily designed to strongly increase adhesion of solvent based inks/coatings to a variety of plastics used for food packaging or other purposes. It also improves pigment distribution and heat sealing resistance, allowing perfect hiding po...view more Tytan AP20 is primarily designed to strongly increase adhesion of solvent based inks/coatings to a variety of plastics used for food packaging or other purposes. It also improves pigment distribution and heat sealing resistance, allowing perfect hiding power and appearance of printing on otherwise problematic substrates. view less
PEL-SIL CL370 Ele Corporation PEL-SIL CL370 is an amino-functional siloxane with pedant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL CL370 is a reactive amine-containing siloxane addi...view more PEL-SIL CL370 is an amino-functional siloxane with pedant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL CL370 is a reactive amine-containing siloxane additive as resin modifier for epoxy resin and polyurethane systems to impart flexibility and strength. view less Request Sample
CN9073 Sartomer Americas CN 9073 is a specially designed resin for Adhesives/Pressure Sensitive Adhesive (PSA) applications. This product offers great peel strength on both stainless steel and plastics as well as excellent shear and good tack.