UL Prospector

Success!

Successfully saved your search
Amine Synergist SZ 115 Soltech Ltd Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include ove...view more Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include overprint varnishes, silk screen inks, flexo inks, pigment coatings, and wood sealers. Amine Synergist SZ 115 is 100% polymer solid by weight with a viscosity of 15-25 at 25℃. view less
Monomer SM6226 Jiangsu Sanmu Group Corporation Monomer SM6226 is a special tertiary acrylate used as a reactive amine synergist.
Monomer SM6338 Jiangsu Sanmu Group Corporation Monomer SM6338 is a special tertiary acrylate used as a reactive amine synergist.
Request Sample EBECRYL® 7110 Allnex EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110 provides rap...view more EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, this product reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. It also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings. view less
Request Sample EBECRYL® 7100 Allnex EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an acceleratin...view more EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an accelerating effect on the UV cure speed. It is recommended for: coatings for paper and plastics, overprint varnishes, screen inks, and wood topcoats. view less
LM7401 Sartomer Americas LM7401 is a low migratable acrylated amine synergist developed to enable the formulator to produce inks and varnishes that comply with food packaging regulations.
Speedcure BMS Lambson Group Ltd. Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented ...view more Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented systems and can form a single liquid additive with a liquid amine synergist comprising both initiator and synergist. It also has low yellowing and can be used in printing inks, clear over print varnishes and adhesives as well as decorative coatings for metal cans and food cartons. view less
Request Sample GENOMER* 4514 Rahn USA Corp. GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...view more GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less
Request Sample GENOMER* 3430 Rahn USA Corp. GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured w...view more GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less
Request Sample GENOCURE* MDEA Rahn USA Corp. GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress...view more GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress inks, screen inks and varnishes, paper and board varnishes and wood coatings. view less
Request Sample GENOCURE* LBC Rahn USA Corp. GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied i...view more GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied in paper varnishes, metal varnishes, plastic coatings and water dilutable coatings. view less
Request Sample GENOCURE* MBB Rahn USA Corp. GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnis...view more GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnishes, plastic varnishes, wood coatings, printing inks, industrial coatings and board varnishes. view less
Speedcure XKm Lambson Group Ltd. Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, i...view more Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, it exhibits little yellowing, volatility and odour while curing white pigmented coatings, clear coatings and pigmented printing inks. view less
Request Sample GENOCURE* LBP Rahn USA Corp. GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and boa...view more GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and board varnishes, wood and industrial coatings, printing inks and varnishes and plastic varnishes. view less
Speedcure EDB Lambson Group Ltd. Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over pri...view more Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. view less
Request Sample GENOCURE* BDK Rahn USA Corp. GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset in...view more GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates. view less
Request Sample GENOCURE* BP Rahn USA Corp. GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent fo...view more GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent for photoinitiator cocktails. This product is typically applied in plastic varnishes, printing inks and varnishes and wood and industrial coatings. view less
Speedcure PBZ Lambson Group Ltd. Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing in...view more Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing inks, wood varnishes, over print varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. view less
Speedcure 7010-L Lambson Group Ltd. Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow...view more Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow liquid inhibits low migration and yellowing in addition to providing depth cure in pigmented and thick films. It is applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. view less
Request Sample GENOMER* 5142 Rahn USA Corp. GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in th...view more GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in the following applications: overprint varnishes, coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. view less
Request Sample GENOMER* 5161 Rahn USA Corp. GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use ...view more GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use in the following applications: overprint varnishes; coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. view less
Speedcure DMB Lambson Group Ltd. Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to l...view more Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to little photo-yellowing. It is applied to printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. view less
Speedcure 73 Lambson Group Ltd. Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and pro...view more Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and provides good surface cure with low yellowing. It can be applied to clear coatings, overprint varnishes, wood laquers, silicone based coatings and printing inks. view less
Speedcure EHA Lambson Group Ltd. Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addit...view more Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addition to acting as a useful solvent in UV formulations. It can be applied to wood varnishes, printing inks, adhesives and decorative coatings for metal cans and food cartons. view less
Speedcure 7010 Lambson Group Ltd. Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. ...view more Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This cream to pale yellow free flowing powder inhibits low migration and yellowing in addition to adding depth cure in pigmented in thick films. It can be applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. view less
Speedcure 7005 Lambson Group Ltd. Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It com...view more Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It comes as an off white to pale yellow liquid with low migration, odour and toxicity used in printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chip boards, adhesives and solder masks. view less
Speedcure EPD Lambson Group Ltd. Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...view more Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. view less
Speedcure 7040 Lambson Group Ltd. Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in a...view more Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It can be applied to wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. view less
Doublecure® OPD Double Bond Chemical Ind., Co., Ltd. Doublecure® OPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure® ITX and EMK. T...view more Doublecure® OPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure® ITX and EMK. This product is a pale yellow liquid with a faintly amine odor. Doublecure® OPD is a widely utilized photoactivator, which used in conjunction with a photosensitizer is converted by energy transfer into free radicals. This action can initiate photopolymerization of suitable resin formulations. view less
Doublecure® EPD Double Bond Chemical Ind., Co., Ltd. Doublecure® EPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure ® ITX and MP-L....view more Doublecure® EPD is an efficient amine synergist that is generally used with a photosensitizer to cure coatings that are polymerized by ultraviolet radiation. Photosensitizers that are commonly used in conjunction with it include Doublecure ® ITX and MP-L. Doublecure® EPD can be used for printing ink, decorative coatings for metal cans and food cartons, adhesive, sealant, pressure transfer sheets, photoresist dry film and metal primers. This product is a white crystalline powder with a slight acetic acid smell. view less
Speedcure BEDB Lambson Group Ltd. Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speed...view more Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speedcure BEDB, affording a single liquid additive. This clear, pale yellow liquid has good soluble properties, low toxicity and low odor. It is used in wood varnishes, printing inks, over print varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. view less
Doublecure® EMK Double Bond Chemical Ind., Co., Ltd. Doublecure® EMK is both an aromatic ketone and a tertiary amine. It could act both as a photosensitizer and an amine synergist and would be expected to be an independent complete initiating system. Doublecure® EMK has a strong absorption between 350 to 40...view more Doublecure® EMK is both an aromatic ketone and a tertiary amine. It could act both as a photosensitizer and an amine synergist and would be expected to be an independent complete initiating system. Doublecure® EMK has a strong absorption between 350 to 400 nm which makes it most suitable for pigmented and black UV coating. This product is is a photo-grade EMK which bears bright yellow color and is more resistant to oxidation by exposure in air than the most commercially available EMK. view less
Request Sample EBECRYL® LED 03 Allnex EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA,...view more EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photoinitiators. view less
Request Sample EBECRYL® LEO 10103 Allnex EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator de...view more EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL® LEO 10103 can be used for low migration over print varnishes along with flexographic and offset inks in the entire colour range, including white. EBECRYL® LEO 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure. view less
Doublecure® TPO Double Bond Chemical Ind., Co., Ltd. Doublecure® TPO is a photo initiator for UV coatings. Since it has a minor λmax located in 379 nm, it can be used for pigmented systems without sacrificing activity. Also due to its unprecedented speed and non-yellowing properties, it is the best recommendation for thick film and white pigmented coating. This product is a yellow crystalline powder. Basically, a percentage of 1 – 3 % of Doublecure® TPO is effective for lacquer preparation. If the resin is made of polyester, there is no need for co-initiators. However, due to its sensitivity toward oxygen inhibition, additional co-initiators such as Doublecure® 184 or 173 is highly recommended for pigmented acrylic finishes. If the yellowing is not concerned, amine synergist...view more Doublecure® TPO is a photo initiator for UV coatings. Since it has a minor λmax located in 379 nm, it can be used for pigmented systems without sacrificing activity. Also due to its unprecedented speed and non-yellowing properties, it is the best recommendation for thick film and white pigmented coating. This product is a yellow crystalline powder. Basically, a percentage of 1 – 3 % of Doublecure® TPO is effective for lacquer preparation. If the resin is made of polyester, there is no need for co-initiators. However, due to its sensitivity toward oxygen inhibition, additional co-initiators such as Doublecure® 184 or 173 is highly recommended for pigmented acrylic finishes. If the yellowing is not concerned, amine synergist such as Doublecure® EPD or P-115 is also beneficial to the throughcure. view less
Doublecure® 1256 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1256 is a non-yellowing liquid photoinitiator designed specifically for unsaturated polyesters or thick acrylic UV coatings. It has a minor λmax located in 374 nm, and therefore, it is also ideal for white-pigmented systems. Basically, a percentage of 1 – 3 % of Doublecure® 1256 is effective for lacquer preparation. If the resin is made of polyester, there is no need for coinitiators. However, due to its sensitivity toward oxygen inhibition, additional coinitiators such as Doublecure® 184 or 173 is highly recommended for pigmented acrylic finishes. If the yellowing is not concerned, amine synergist...view more Doublecure® 1256 is a non-yellowing liquid photoinitiator designed specifically for unsaturated polyesters or thick acrylic UV coatings. It has a minor λmax located in 374 nm, and therefore, it is also ideal for white-pigmented systems. Basically, a percentage of 1 – 3 % of Doublecure® 1256 is effective for lacquer preparation. If the resin is made of polyester, there is no need for coinitiators. However, due to its sensitivity toward oxygen inhibition, additional coinitiators such as Doublecure® 184 or 173 is highly recommended for pigmented acrylic finishes. If the yellowing is not concerned, amine synergist such as Doublecure® EPD or 115,225 is also beneficial to the throughcure. Owing to its absorption of light in the long wave UV region, Doublecure® 1256 and lacquers produced from it are daylight-sensitive. Therefore, light with wavelength less than 500 nm must be excluded during storage and processing. view less
Doublecure® TPO-L Double Bond Chemical Ind., Co., Ltd. Doublecure® TPO-L is a photoinitiator for UV coatings. Since it has a minor λmax located in 379 nm, it can be used for pigmented systems without sacrificing activity. Also due to its unprecedented speed and non-yellowing properties, it is the best recommendation for thick film and white pigmented coating. Basically, a percentage of 1 – 3 % of Doublecure® TPO-L is effective for lacquer preparation. If the resin is made of polyester, there is no need for coinitiators. However, due to its sensitivity toward oxygen inhibition, additional coinitiators such as Doublecure® 184 or 173 is highly recommended for pigmented acrylic finishes. If the yellowing is not concerned, amine synergist...view more Doublecure® TPO-L is a photoinitiator for UV coatings. Since it has a minor λmax located in 379 nm, it can be used for pigmented systems without sacrificing activity. Also due to its unprecedented speed and non-yellowing properties, it is the best recommendation for thick film and white pigmented coating. Basically, a percentage of 1 – 3 % of Doublecure® TPO-L is effective for lacquer preparation. If the resin is made of polyester, there is no need for coinitiators. However, due to its sensitivity toward oxygen inhibition, additional coinitiators such as Doublecure® 184 or 173 is highly recommended for pigmented acrylic finishes. If the yellowing is not concerned, amine synergist such as Doublecure® EPD or P-115 is also beneficicial to the throughcure. Owing to its absorption of light in the long wave UV region, Doublecure® TPO-L and lacquers produced from it are daylight-sensitive. Therefore, light with wavelengths less than 500 nm must be excluded during storage and processing. view less
Zephrym™ ColorFX Carbon Black Pigment Dispersant Croda Coatings & Polymers Zephrym™ ColorFX Carbon Black Pigment Dispersant is a novel amine functional dispersant for high performance pigments, such as carbon black, in solvent borne formulations. Zephrym™ ColorFX offers enhanced color development - no synergist needed -, signifi...view more Zephrym™ ColorFX Carbon Black Pigment Dispersant is a novel amine functional dispersant for high performance pigments, such as carbon black, in solvent borne formulations. Zephrym™ ColorFX offers enhanced color development - no synergist needed -, significantly lowers usage levels, lower viscosity and improved stability. view less
Request Sample Sunitor ITX Yantai Suny Chem International Co., Ltd. Sunitor ITX is a highly efficient Free Radical Type II solid photo initiator which is used to initiate the UV polymerization of chemically unsaturated pre-polymers (e.g. acrylates) in combination with tertiary amine synergists.
Doublecure® LBP Double Bond Chemical Ind., Co., Ltd. Doublecure® LBP is an efficient liquid photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115 and 225 generates free radicals, which can initiate polymerization of UV radiation curing systems.
Doublecure® 225 Double Bond Chemical Ind., Co., Ltd. Doublecure® 225 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this yellow liquid is used in combination with other photoinitiators, an increase...view more Doublecure® 225 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this yellow liquid is used in combination with other photoinitiators, an increase in cured speed, especially at the surface, can be observed. Other advantages include light color, low viscosity, improved stability and low volatility. view less
Doublecure® BP Double Bond Chemical Ind., Co., Ltd. Doublecure® BP is an efficient photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115, generates free radicals which can initiate polymerization of UV radiation curing systems. This product appears as a...view more Doublecure® BP is an efficient photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115, generates free radicals which can initiate polymerization of UV radiation curing systems. This product appears as a white to light yellow crystal or flake. view less
BLS® 783 Mayzo, Inc. BLS® 783 is a synergistic blend of the hindered amine light stabilizers BLS® 1622 and BLS® 1944. The product is highly effective to improve light stability. It is non-discoloring, has good compatibility with polyolefin substrates, and is highly resistant ...view more BLS® 783 is a synergistic blend of the hindered amine light stabilizers BLS® 1622 and BLS® 1944. The product is highly effective to improve light stability. It is non-discoloring, has good compatibility with polyolefin substrates, and is highly resistant to extraction. BLS® 783 is used in tapes. view less
Speedcure ITX Lambson Group Ltd. Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decora...view more Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. view less
Request Sample GENOCURE* DMHA Rahn USA Corp. GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, pl...view more GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, plastic coatings, water dilutable coatings, clear coatings and pigmented coatings . view less
Tiancure ITX Shanghai Tiansheng Chemical Co., Ltd. Tiancure ITX is a yellow powder that when used in combination amine synergists, acts as a highly efficient type II photoinitiator to support radical photopolymerisation of unsaturated resins. It can be used in UV curable formulations, particularly pigment...view more Tiancure ITX is a yellow powder that when used in combination amine synergists, acts as a highly efficient type II photoinitiator to support radical photopolymerisation of unsaturated resins. It can be used in UV curable formulations, particularly pigmented coatings and varnishes on wood, metal, plastic, printing inks and paper. view less
Doublecure® 115 Double Bond Chemical Ind., Co., Ltd. Doublecure® 115 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this product is used in combination with other photoinitiators an increase in cur...view more Doublecure® 115 is a reactive amine additive that is generally used in place of more fugitive amine synergists to increase the cure speed of ultraviolet cured coatings. When this product is used in combination with other photoinitiators an increase in cured speed, especially at the surface, can be observed, Besides the improved stability, other advantages of Doublecure® 115 are including light color, low viscosity and low volatility. Formulated UV/EB curable products containing Doublecure® 115 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. This product is a clear yellowish liquid with a slight amine smell. view less
Speedcure 2-ITX Lambson Group Ltd. Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as wel...view more Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. view less
Request Sample Sunitor ITX Yantai Suny Chem International Co., Ltd. Sunitor ITX is a highly efficient Free Radical Type II solid photoinitiator, used to initiate the UV polymerization of chemically unsaturated pre-polymers (e.g. acrylates) in combination with tertiary amine synergists. This product is mainly used in UV cu...view more Sunitor ITX is a highly efficient Free Radical Type II solid photoinitiator, used to initiate the UV polymerization of chemically unsaturated pre-polymers (e.g. acrylates) in combination with tertiary amine synergists. This product is mainly used in UV curable, clear and pigmented systems, such as UV coatings, inks, adhesives, and photoresists. view less
Request Sample GENOMER* 5271 Rahn USA Corp. GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and a...view more GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and adhesives. GENOMER* 5271 contributes to excellent cure response, toughness, flexibility and adhesion. Unlike conventional amine synergists, GENOMER* 5271 reacts to become part of the product network, leading to lower odor, lower extractables and better overall properties. view less
Request Sample GENOCURE* EMK Rahn USA Corp. GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...view more GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. view less
Speedcure DETX Lambson Group Ltd. Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce prepara...view more Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce preparation time in printing inks, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. view less
Speedcure BP Lambson Group Ltd. Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibitio...view more Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibition in printing inks, clear over print varnishes, wood varnishes, decorative coatings for metal cans and cartons as well as adhesives. view less
NACORR® 1754 King Industries, Inc. NACORR® 1754 is a liquid corrosion inhibitor that is based on an amine salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, and gains synergistic results when combined wi...view more NACORR® 1754 is a liquid corrosion inhibitor that is based on an amine salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in water based primers for appliance, coil and automotive applications. view less
Request Sample GENOCURE* PMP Rahn USA Corp. GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENO...view more GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENOCURE* EHA or GENOMER* 5275 (up to 15%). This product is applied in offset inks and varnishes, glass fiber coating, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives, wood coatings and printed circuit boards. view less
Speedcure BEM Lambson Group Ltd. Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones...view more Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones that helps reduce viscosity of formulations, contains solubility and compatibility with unsaturated monomers and does not contribute to photo yellowing. It is applied to printing inks, clear overprint varnishes, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. view less
Speedcure MBB Lambson Group Ltd. Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid...view more Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid surface cure and ideal for food packing printing inks due to its minimal odor. It can be used in printing inks, decorative coatings for metal cans and food cartons as well as clear over print and wood varnishes. view less
Chinox® 168 Double Bond Chemical Ind., Co., Ltd. Chinox® 168 is a solid phosphite processing stabilizer with low volatility and outstanding hydrolytic stability. This secondary antioxidant provides excellent heat stability and anti-oxidation, with good resin compatibility and excellent extraction resistance. During processing, Chinox® 168 reacts with hydroperoxides formed by auto-oxidation of polymers and prevents the induced degradation. Therefore, it will extend the performance of primary antioxidants. Generally, It is used in combination with hindered phenolic antioxidants or hindered amine stabilizers to establish synergist...view more Chinox® 168 is a solid phosphite processing stabilizer with low volatility and outstanding hydrolytic stability. This secondary antioxidant provides excellent heat stability and anti-oxidation, with good resin compatibility and excellent extraction resistance. During processing, Chinox® 168 reacts with hydroperoxides formed by auto-oxidation of polymers and prevents the induced degradation. Therefore, it will extend the performance of primary antioxidants. Generally, It is used in combination with hindered phenolic antioxidants or hindered amine stabilizers to establish synergistic effects on various polymers. view less
Speedcure CPTX Lambson Group Ltd. Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. Thi...view more Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. This yellow crystalline powder contains fast cure speed, excellent depth cure and high final degree of cure suitable for pigmented and thick films. It can be applied to printing inks, wood varnishes, adhesives as well as decorative coatings for metal cans and food cartons. view less
Request Sample Tinuvin® 5050 BASF Dispersions & Resins Tinuvin® 5050 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne in...view more Tinuvin® 5050 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne industrial and decorative coatings. The broad UV absorbance of Tinuvin® 5050 makes it suitable for a wide range of coatings for wood, plastics and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. view less
Request Sample Tinuvin® 5151 BASF Dispersions & Resins Tinuvin® 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solven...view more Tinuvin® 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solventborne industrial and decorative coatings. The broad UV absorbance of the used UVA of Tinuvin® 5151 makes it suitable for a wide range of coatings for wood, plastics, and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. view less
Request Sample Chimassorb® 81 BASF Dispersions & Resins Chimassorb® 81 is a solid UV absorber of the 2-hydroxy-benzophenone class. This product significantly improves the resistance of clear coatings to failures upon exposure to sunlight such as discoloration, cracking, loss of gloss and loss of adhesion. Its performance in outdoor applications can be improved further by use in synergistic combination with a hindered amine...view more Chimassorb® 81 is a solid UV absorber of the 2-hydroxy-benzophenone class. This product significantly improves the resistance of clear coatings to failures upon exposure to sunlight such as discoloration, cracking, loss of gloss and loss of adhesion. Its performance in outdoor applications can be improved further by use in synergistic combination with a hindered amine light stabilizer (HALS) such as Tinuvin® 292 or Tinuvin® 123. The use of Chimassorb® 81 should be reserved for applications where expectations of the final coating’s durability are moderate since the light stability of 2-hydroxy-benzophenone derivatives is known to be limited. view less
Request Sample Sunsorb-5151 Yantai Suny Chem International Co., Ltd. Sunsorb-5151 is a is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer(HALS).It has been designed to fulfill high cost/performance and durability requirements of exterior waterb...view more Sunsorb-5151 is a is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer(HALS).It has been designed to fulfill high cost/performance and durability requirements of exterior waterborne and solvent borne industrial and decorative coatings. The broad UV absorbance of the used UVA makes it suitable for a wide range of coatings for wood, plastics and metal .The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination and color change and provides full substrate protection. view less
Request Sample Tinuvin® 144 BASF Dispersions & Resins Tinuvin® 144 is a light stabilizer of the hindered amine class (HALS) and also contains an antioxidant moiety of the sterically hindered phenol type. Its efficiency provides significantly extended life time to coatings by minimizing paint defects such as...view more Tinuvin® 144 is a light stabilizer of the hindered amine class (HALS) and also contains an antioxidant moiety of the sterically hindered phenol type. Its efficiency provides significantly extended life time to coatings by minimizing paint defects such as cracking and loss of gloss. This product is a white to slightly yellow powder. Tinuvin® 144 is recommended for applications such as automotive coatings, coil coatings, and powder coatings. The performance of Tinuvin® 144 can be significantly improved when used in combination with a UV absorber such as recommended below. These synergistic combinations give superior protection against gloss reduction, cracking, blistering delamination and color change in automotive coatings. Tinuvin® 144 can also reduce yellowing caused by overbake. view less
Request Sample Tinuvin® 292 BASF Dispersions & Resins Tinuvin® 292 is a liquid hindered amine light stabilizer especially developed for coatings. It is an almost pure mixture of the two active ingredients below. It is this combination that keeps the product liquid, unlike the pure diester which tends to soli...view more Tinuvin® 292 is a liquid hindered amine light stabilizer especially developed for coatings. It is an almost pure mixture of the two active ingredients below. It is this combination that keeps the product liquid, unlike the pure diester which tends to solidify, even at room temperature. The efficiency of Tinuvin® 292 provides significantly extended lifetime to coatings by minimizing paint defects such as cracking and loss of gloss. The dispersion of Tinuvin® 292 in waterborne coatings may be facilitated by dilution with a watermiscible solvent such as butylcarbitol. The performance of Tinuvin® 292 can be significantly improved when used in combination with a UV absorber such as recommended below. These synergistic combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination and color change. view less
Request Sample Tinuvin® 5060 BASF Dispersions & Resins Tinuvin® 5060 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborn...view more Tinuvin® 5060 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne industrial and decorative coatings and is especially suited for oxidative drying and acid catalyzed systems. The broad UV absorbance of the used UVA of Tinuvin® 5060 makes it suitable for a wide range of coatings for wood, plastics, and metal. The non-basic character of the used NOR HALS prevents possible interactions with acidic paint ingredients such as catalysts, biocides, and pigments. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. view less