| HPP 3037 | US Polymers - Accurez LLC | HPP 3037 is a short oil alkyd designed to be used as a baking vehicle with an aminoplast resin. It can also be used as a plasticizer for lacquers. | Request Sample |
| Polychem 7610-OX-50 | OPC Polymers | Polychem 7610-OX-50 is an short coconut alkyd in an Oxsol 100 solvent. It is commonly used for baking finishes in combination with aminoplast resins or as a plasticizer for lacquers. | |
| HPP-E-9228-18-60 | US Polymers - Accurez LLC | HPP-E-9228-18-60 is a short coconut oil alkyd designed to be used as a baking vehicle with an aminoplast resin. It can also be used as a plasticizer for nitrocellulose lacquers. | Request Sample |
| HPP-E-9883-21-80 | US Polymers - Accurez LLC | HPP-E-9883-21-80 is a short oil, high solids coconut alkyd designed to be used as a baking vehicle with an aminoplast resin. It can also be used as a plasticizer for lacquers. | Request Sample |
| AROPLAZ® 4097-WG4-55 | Polynt Composites | AROPLAZ® 4097-WG4-55 is a water-dispersible, acrylic-modified polyester resin. This product offers good hardness and flexibility, good stain-, chemical- and solvent-resistance, with high gloss. It can be used to manufacture low-VOC coatings crosslinked with aminoplast...view more AROPLAZ® 4097-WG4-55 is a water-dispersible, acrylic-modified polyester resin. This product offers good hardness and flexibility, good stain-, chemical- and solvent-resistance, with high gloss. It can be used to manufacture low-VOC coatings crosslinked with aminoplast resins. view less | |
| HPP-E-9911-21-80 | US Polymers - Accurez LLC | HPP-E-9911-21-80 is a short oil coconut alkyd designed to be used as a baking vehicle with an aminoplast resin. It can also be used as a plasticizer for lacquers. This product is listed in the DSL/NDSL inventory. | Request Sample |
| AROPLAZ® 6749-XA6-90 | Polynt Composites | AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture a...view more AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture and equipment. view less | |
| SETAL® 11-1390 | Allnex | SETAL® 11-1390 is a chain-stopped tall oil alkyd resin for use in the manufacture of general industrial air dry or bake enamels and conversion coatings for wood furniture and bath or kitchen cabinets. Crosslinking SETAL® 11-1390 with aminoplast resins giv...view more SETAL® 11-1390 is a chain-stopped tall oil alkyd resin for use in the manufacture of general industrial air dry or bake enamels and conversion coatings for wood furniture and bath or kitchen cabinets. Crosslinking SETAL® 11-1390 with aminoplast resins gives good durability and resistance to solvents and moisture. view less | Request Sample |
| K-FLEX® 171-90 | King Industries, Inc. | K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers lon...view more K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy flexibilizer. view less | |
| K-PURE® CDR-3316 | King Industries, Inc. | K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations include cationic cured epoxies, aminoplast...view more K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations include cationic cured epoxies, aminoplast, siloxane and urethane based systems. It appears as a clear, light straw liquid and offers adhesion promotion and resistivity. This product is soluble in esters, alcohols, xylene, aromatic 100 & aromatic 150, ketones, and is insoluble in water. It can be applied in anti-reflective coatings, conformal coatings, and conductive & dielectric adhesives. view less | |
| SETAL® 26-3705 | Allnex | SETAL® 26-3705 is a low viscosity acetoacetate - modified polyester with excellent compatibility with a variety of industrial resin systems. Because of the acetoacetate functionality, this reactive diluent is crosslinkable with aminoplast resins, poly-iso...view more SETAL® 26-3705 is a low viscosity acetoacetate - modified polyester with excellent compatibility with a variety of industrial resin systems. Because of the acetoacetate functionality, this reactive diluent is crosslinkable with aminoplast resins, poly-isocyanates, polyamines, poly-ketimines and unsaturated polyesters or acrylics. SETAL® 26-3705 was developed for the next generation of non-isocyanate two component primer systems. When reacted with SETAL® 26-3701 and SETAL®UX 10-1440, this system provides much faster dry versus a standard two-component isocyanateprimer system without the negative health and safety issues associated with isocyanates. view less | Request Sample |
| K-PURE® CDR-3314 | King Industries, Inc. | K-PURE® CDR-3314 is a reactive, aliphatic polyester polyol, that is suggested for modifying cationic cured epoxy systems, aminoplast resins and siloxanes to give improvements in adhesion and flexibility. Its uniform, narrow molecular weight distribution a...view more K-PURE® CDR-3314 is a reactive, aliphatic polyester polyol, that is suggested for modifying cationic cured epoxy systems, aminoplast resins and siloxanes to give improvements in adhesion and flexibility. Its uniform, narrow molecular weight distribution and original chemical structure produce consistent performance and compatibility. This product appears as a clear, light straw liquid and offers good flexibility, resistivity, low VOC, and adhesion promotion. It is soluble in esters, xylene, ketones, alcohols, aromatic 100 & aromatic 150, and is insoluble in water. It can be applied in conductive adhesives, dielectric adhesives, anti-reflective coatings, and conformal coatings. view less | |
| K-PURE® CDR-3315 | King Industries, Inc. | K-PURE® CDR-3315 is a low viscosity, 100% solids, fully saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to lower modulus, improve flexibility and enhance adhesion in cationic cured epoxies, aminoplast resins, siloxa...view more K-PURE® CDR-3315 is a low viscosity, 100% solids, fully saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to lower modulus, improve flexibility and enhance adhesion in cationic cured epoxies, aminoplast resins, siloxanes and isocyanate systems. K-PURE® CDR-3315 can also ehnance the toughness of very brittle systems at low levels. It appears as a clear, light straw liquid and offers high resistivity. This product is soluble in esters, alcohols, ketones, aromatic 100 & aromatic 150, xylene, and is insoluble in water. It can be applied in anti reflective coatings, conformal coatings, and conductive & dielectric adhesives. view less | |
| K-PURE® CDR-3317 | King Industries, Inc. | K-PURE® CDR-3317 is an aliphatic, low molecular weight urethane diol oligomer, supplied at 100% solids. It is suggested to be used in systems that require adhesion promotion, chemical resistance, and hardness development. K-PURE® CDR-3317 is ideal for aminoplast...view more K-PURE® CDR-3317 is an aliphatic, low molecular weight urethane diol oligomer, supplied at 100% solids. It is suggested to be used in systems that require adhesion promotion, chemical resistance, and hardness development. K-PURE® CDR-3317 is ideal for aminoplast resins, siloxanes and urethanes. K-PURE® CDR-3317 also acts as a compatibilizer or coalescing aid, with the benefit of co-reacting with the system. It appears as a viscous, clear liquid and offers low VOC. This product is soluble in water, almost all organic solvents, and is insoluble in aromatic solvents. It can be applied in conformal coatings, adhesives & sealants, and anti reflective coatings. view less | |
| K-FLEX® 188 | King Industries, Inc. | K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure p...view more K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure produce exceptional and consistent performance and broad compatibility. K-FLEX® 188's primary hydroxyl groups also produce reactivity with epoxies in cationic thermal cure systems. This product is 100% active and offers, good flexibility, adhesion to plastics, and high resistivity. It appears as a clear, light straw liquid and is soluble in the aerospace, automotive refinish, and marine maintenance industries along with plastic substrates, overprint varnishes, glass laminates, and optical coatings. view less | |
| CARBALINK® HE CARBAMATE | Huntsman Performance Products | Will undergo reaction with isocyanates while preserving the carbamate group. This group may later be reacted with common aminoplasts such as hexamethyl melamine to create a urethane crosslinked system with superior resistance to acid rain, UV radiation, a...view more Will undergo reaction with isocyanates while preserving the carbamate group. This group may later be reacted with common aminoplasts such as hexamethyl melamine to create a urethane crosslinked system with superior resistance to acid rain, UV radiation, and scratch and mar. view less | |
| Tetrahydrofurfuryl Alcohol (THFA) | Henan Harvest Chem Co., LTD. | Tetrahydrofurfuryl Alcohol (THFA) is a colorless, low toxicity, liquid. This product provides moisture absorbing properties. Tetrahydrofurfuryl Alcohol (THFA) can also be used for making aminoplastics and a fine solution to resin,coating material and gre...view more Tetrahydrofurfuryl Alcohol (THFA) is a colorless, low toxicity, liquid. This product provides moisture absorbing properties. Tetrahydrofurfuryl Alcohol (THFA) can also be used for making aminoplastics and a fine solution to resin,coating material and grease. In printing and dyeing, it can be used as a lubricant and dispersing agent. view less | |
| SETAL® 11-1397 | Allnex | SETAL 11-1397 is a chain-stopped tall oil alkyd resin for use in the manufacture of general industrial air dry or bake enamels and refinish enamels for autos or trucks. Crosslinking SETAL 11-1397 with aminoplasts or isocyanate resins gives good durability...view more SETAL 11-1397 is a chain-stopped tall oil alkyd resin for use in the manufacture of general industrial air dry or bake enamels and refinish enamels for autos or trucks. Crosslinking SETAL 11-1397 with aminoplasts or isocyanate resins gives good durability and resistance to solvents and moisture. view less | Request Sample |
| CYCAT® 6925 | Allnex | CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are ...view more CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermoset systems. This product can be used in food contact applications. For the latest information about the compliance status with FDA, EU, Chinese or other food regulations. view less | Request Sample |
